The Position

• The In-Market Quality, AP(SG/ID/VN/HK) Lead reports to AP In-Market Quality Lead.
• The incumbent is a leader of a team of 2-3 quality professionals responsible for In-Market Quality activities and maintains the affiliates within the cluster of countries in scope, in a state of GDP (and where applicable, GMP) compliance.
• The incumbent provides overall leadership and direction, coaching and training to the local In-Market Quality team; ensures that appropriate Quality Systems are established, implemented and maintained in each market in scope, and appropriate oversight is in place to ensure that local regulatory requirements are compliant and can be supported in a simple, cost effective manner, while working within the bounds of the global Quality Management System.
• The incumbent liaise with Global Quality, External Manufacturing Quality, the Quality Units of the manufacturing network, Regulatory Affairs / Pharmacovigilance and Supply Chain to support the commercial activities while maintaining Quality and Compliance.

Responsibilities:

• Responsible for the strategy, leadership, management and budgetary controls of a multi-cultural team of Quality professionals.
• Holds Employee Development Plan discussions and is responsible for executing the performance management process.
• Contributes to the development of the AP IMQ budget and tracks and controls expenses as needed to meet AP IMQ budget.
• Exhibits our company Leadership Behaviors and provides a leadership example for the team.
• Works strategically and in collaboration with other functions to continuously improve our company`s effectiveness and efficiency in quality management and quality systems supporting AP IMQ function.
• Ensure alignment of Indonesia, Singapore, Hong Kong and Vietnam market with applicable global GDP/GMP regulations, global quality systems and with agency expectations.
• Establish and maintain strong partnerships with key global/regional colleagues and teams that impact Quality and Compliance.
• Ensure deployment and implementation of new / revised QMS policies, standards and global SOPs.
• Establish performance management processes to monitor compliance and continuous quality improvements.
• Provide leadership and oversight for Significant Investigations, Fact Findings, HA notifications and Market Actions.
• Drive the development, implementation and realization of Permanent Inspection Readiness in collaboration with key stakeholders.

Required Education, Experience and Skills:

• Bachelor or Masters Degree in Chemistry, Pharmacy, Biology, Microbiology, Chemical Engineering (or equivalent)
• Solid knowledge of global cGDPs/GMPs relevant to Marketing Authorizatin Holders and countries in scope
• Strong compliance mindset, excellent project management and organizations skills
• Excellent problem-solving skills, based on science, facts, data and understanding of regulatory requirements in complex and evolving environments; must be able to apply sound risk management principles
• Ability to be decisive and influence management with demonstrated leadership skills to drive change
• Ability to work collaboratively in team settings, across functions, and within matrix organisations to achieve objectives
• Strong commitment to diversity and employee development
• Strong demonstrated interpersonal, communication, collaborative and leadership skills in dealing with a broad variety of cultures
• Demonstrated ability to create simplicity out of complex environments and challenges Minimum

Preferred Education, Experience and Skills:

• Minimum of 5 years' experience in the pharmaceutical industry, with solid compliance experience.
• Must have expertise and broad experience in Quality Systems, Quality Assurance and Quality Control including solid knowledge of global GDP and regulatory requirements.

The scope of Services for the One (1) Onshore Quality Assurance/ Tester shall

be as follows:

a) Understand and document business processes, workflow and user story;

b) Perform checks under both functional and non-functional scopes of testing;

c) Review, develop and align test plan, test cases, scenarios and strategies,

ensure adherence to quality standards;

d) Perform manual and automated testing using Tricentis TOSCA, including

preparing test data when necessary;

e) Develop and maintain automated test scripts;

f) Review, support and participate in functionality and technical testing such as

performance testing, security, interface integration and usability testing;

g) Review test reports and results of the Authority’s appointed contractors for

the Authority’s systems;

h) Collaborate and coordinate with system stakeholders and Authority’s

appointed contractors for testing;

i) Review test process and recommend improvement, which includes analysing

test processes and methodologies, identify area for improvement and

recommend process optimisations and best practices; and

RFQ SPECIFICATIONS

j) Manage test activities and ensure the planned test activities are completed as

scheduled.

19. The One (1) Onshore Quality Assurance/ Tester proposed by the Contractor shall

have at least 3 years of experience as a Quality Assurance/ Tester or equivalent

position and the following skill sets:

a) Bachelor’s degree in computer science, Computer or Electronics

Engineering, Information Technology or related disciplines would be

preferred;

b) Certified Software Testing Professional and/or Certified Software Quality

Analyst will be an added advantage;

c) Strong analytical skills, meticulous attention to details, good interpersonal

skills such as tactfulness, good presentation and listening skills;

d) Experience in the following would be advantageous:

i. Automated testing tools such as Tricentis TOSCA; and

ii. Testing for government public services.

e) Good written and verbal communication and presentation skills, able to

interact professionally with all levels of the organisation.

Our client is an MNC specializing in advanced sheet metal fabricators with a focus on precision engineering and a precision machining service provider based in Singapore.

Job Highlights:

• Basic Up to $4000
• Working Location: Tuas (walking distance from MRT)
• Working days: 5 days (Mon-Fri) - Office Hours

Job responsibilities:

• Oversee in-progress and final product inspections.
• Approve first article submissions and ensure compliance with customer requirements.
• Monitor and improve quality standards continuously.
• Resolve quality issues with internal teams and external partners.
• Supervise and ensure proper calibration of measuring equipment.
• Review on non-conformances & approve disposition actions.
• Prepare 8D reports to address quality issues.
• Provide regular quality reviews and training sessions.
• Support product and process development for First Article Product.
• Assist in maintaining ISO compliance, including reports and follow-ups.

Job Requirements:

• Minimum Diploma in Mechanical, Manufacturing, or related Engineering field, or equivalent.
• At least 3 years of relevant experience is required for this role.
• Knowledge of measuring and statistical techniques.
• Familiarity with CMM machines.
• Ability to lead a team of quality operators.
• Class 3 driving license is a plus.

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

**We regret to inform that only shortlisted candidates will be informed.**

Lee Yu Qian (Lenore)

Registration Number: R24124538

EA License Number:18C9027

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

RESPONSIBILITIES

• Define and implement QA strategies, test plans, and test cases for web applications.
• Lead and mentor a team of QA engineers, fostering collaboration with cross-functional teams.
• Oversee all testing phases, including functional, integration, regression, performance, and security.
• Implement automation frameworks and optimize testing tools for continuous testing.
• Manage defect tracking, root cause analysis, and resolution to ensure seamless delivery.
• Ensure compliance with security, accessibility, and regulatory standards for web platforms.

• Bachelor's degree in computer science or equivalent.
• Minimum 5 years' experience of working experience in software testing and 2 years in leadership role
• Proficiency with QA tools (e.g., Selenium, JIRA, Postman) and automation frameworks (e.g., Katalon Studio, pCloudy).
• Familiarity with Agile and Scrum methodologies, along with scripting or programming languages (e.g., Python, JavaScript).
• Experience with performance testing tools (e.g., JMeter, LoadRunner) and end-to-end QA for complex web applications.
• Strong leadership, problem-solving, and communication skills

We highly encouraged all applicants to submit their applications via the LEGO Career Portal using this link: https://www.lego.com/en-us/careers/job/sr-supplier-quality-engineer-6f94007108221000602a9e2e02f30000

Core Responsibilities:
• Be the key person in providing high quality solutions to assigned tasks to go beyond the set goals. Cases, for example, claim/big incident handling etc.
• Perform and execute independently all assigned quality assessments and audits for potential suppliers and existing suppliers to look for and evaluate supplier quality capability improvements or upgrading opportunities and take ad hoc actions.
• Follow up & monitor with well formulated plan & steps of all audit NC status or supplier quality improvement projects to uplift supplier platform capabilities & performance.
• Follow up designed data analysis tasks, which add value to supplier performance monitoring and business/operating plan related decision-making
• Proactively involve in activities, continuously contribute on sustainable supplier platforms through understanding the company, business category’s strategies, intelligently transform things for significantly improved results

• Role authority: declare supplier quality audit result. Approve/reject supplier’s reaction for customer claim.

Do you have what it takes?

• More than 8 years working experience on quality or engineering; certified lead auditor for VDA 6.3 will be preferred
• More than 8 years on hands experience of handling quality issues or shop floor control on plastic or electronics products;
• insightful Complex global collaboration skills and key stake holder management
• Profound project management experience to be competent at global quality big case handling
• Certificated Lead Auditor for ISO 9001
• Qualified Auditor for VDA6.3（nice to have）
• Good understanding on lean and quality tools like SPC, MSA, FMEA, 8D etc.
• Reading/writing/speaking is requested frequently for English.(C1)

No relocation assistance is offered for this position

Applications are reviewed on an ongoing basis. However, please note we do amend or withdraw our jobs and reserve the right to do so at any time, including prior to any advertised closing date. So, if you're interested in this role we encourage you to apply as soon as possible.

What’s in it for you?

Here is what you can expect:

Family Care Leave - We offer enhanced paid leave options for those important times.

Insurances – All colleagues are covered by our life and disability insurance which provides protection and peace of mind.

Wellbeing - We want our people to feel well and thrive. We offer resources and benefits to nurture physical and mental wellbeing along with opportunities to build community and inspire creativity.

Colleague Discount – We know you'll love to build, so from day 1 you will qualify for our generous colleague discount.

Bonus - We do our best work to succeed together. When goals are reached and if eligible, you'll be rewarded through our bonus scheme.

Workplace - When you join the team you'll be assigned a primary workplace location i.e. one of our Offices, stores or factories. Our hybrid work policy means an average of 3 days per week in the office. The hiring team will discuss the policy and role eligibility with you during the recruitment process.

Children are our role models. Their curiosity, creativity and imagination inspire everything we do. We strive to create a diverse, dynamic and inclusive culture of play at the LEGO Group, where everyone feels safe, valued and they belong.

The LEGO Group is highly committed to equal employment opportunity and equal pay and seeks to encourage applicants from all backgrounds (eg. sex, gender identity or expression, race/ethnicity, national origin, sexual orientation, disability, age and religion) to apply for roles in our team.

Research shows that women and people from different underrepresented backgrounds often only apply for a job if they meet 100% of the listed qualifications. For all candidates, if you dream of being a part of our team and you meet many, but not all of our listed qualifications for this role, please apply.

The LEGO Group is fully committed to Children’s Rights and Child Wellbeing across the globe. Candidates offered positions with high engagement with children are required to take part in Child Safeguarding Background Screening, as a condition of the offer.

Thank you for sharing our global commitment to Children’s Rights.

Just imagine building your dream career.

Then make it real.

Join the LEGO® team today.

At Baker Tilly Singapore, we welcome highly motivated and committed individuals who share our core values to join us. We are committed to our values of leading by example, delivering quality services with integrity, communicating openly, acting ethically, and fostering a community built around civic responsibility and teamwork.

We are looking for an Assurance (Financial Services) Associate, who will be involved in various sizes of financial services audit engagements which include planning, performing, and concluding the engagement. The Assurance Associate will be exposed to a broad range of capital markets entities and investment funds such as private equities, real estate, mutual funds, variable capital companies, etc.

In this role, you will:

• Involvement in a broad range of statutory and regulatory audit assignments for our financial services clients

• Assist in obtaining all necessary audit working papers and documentation including researching and documenting facts and findings

• Identify and communicate accounting and auditing matters to managers and partners

• Identify performance improvement opportunities

• Interact with clients to help ensure that the information flow from the client to the audit team is efficient

We are looking for people with the following:

• Graduates with an Accountancy degree or equivalent professional qualification in Accountancy

• Accountancy undergraduates in the final year of study are welcome to apply

• Graduates with non-accountancy degrees who are keen to pursue qualifications as Singapore Chartered Accountants are welcome to apply

• Good command of the English language

• Strong interpersonal and client relationship skills

• Experienced candidates will be considered for the Senior Associate position

We regret that only shortlisted candidates will be notified.

The Service Quality Associate (SQA)act as the media between internal partners and residents as well as their families. The SQA is to maintain high standards of care and service delivery, promoting residents’ well-being, and ensuring a conducive living environment for residents, through gathering feedback and working with internal partners.

Work Location: Senja Care Home

Client Care Management

• Act as the point of contact to interact and gather feedback from residents and their families to understand their needs and preferences.
• Work towards resolving issues and ensuring a positive outcome for all parties involved.
• Collaborate with internal partners within the care home to ensure a cohesive and collaborative approach to resident care and service delivery.
• Identify and share areas of improvement and provide recommendations.

Training and Activity Management

• Coordinate and deliver in-service talks to residents and staff.
• Encourage residents to participate in activities and events for their health well-beings.

Service Quality

• Monitor and evaluate the quality of care provided to residents by conducting regular assessments, audits and surveys.
• Identify areas for improvement and recommend strategies to enhance the quality of services.
• Implement initiatives to enhance resident satisfaction and improve the overall resident experience.
• Prepare reports for management and regulatory agencies as required.
• Ensure that the care home complies with all relevant regulations, policies, and procedures. Stay abreast with industry standards and best practices to maintain compliance.
• Escalate to HOD or Senior Management Team (SMT) for feedback that warrants immediate attention or has insinuation of escalation to public forum or media.
• Track all visits, feedback, recommendations and report at Vanguard Rehab and Clinical Meeting (VRCM) platform or any other platforms when necessary or required.

Administration

• Maintain accurate records of quality assurance activities, resident feedback, and compliance measures.

Requirements

• Diploma / GCE “A” level / GCE “O” level / GCE “N” level in a relevant discipline
• Possess at least 1 - 2 years working experience in Service Quality function or quality improvement programmes in healthcare or similar setup.
• Those with experience in Nursing Homes and/or long-Term Care Facility would be preferred.
• Ability to interact in at least 2 of the languages/dialects such as Malay, Mandarin or Tamil to communicate with the clients and families.
• Effective interpersonal, engagement and follow-up skills
• Detail-oriented
• Passion for quality and ageing issues
• Good written and verbal communication skills

The Assurance Senior is expected to lead various sizes of audit engagements which include planning, performing, reviewing of audit work performed by less experienced personnel and concluding the engagement.

Responsibilities

• Work closely with team members to execute the audit plan and ensure timely completion of the audit engagement
• Work closely with clients and manages their expectations to further nurture on-going client relationships
• Able to identify unethical behaviour and react based on the applicable ethical principles

Requirements

• A degree in Accountancy or equivalent professional qualification in Accountancy
• At least 3 years of external audit experience
• Good command of the English language
• Strong interpersonal and client relationship skills

About the Role:

As a CBRE Contract Support Associate, you will provide exceptional customer service and administrative support to a large Business Unit, Facility, or Account. This job is part of the Contract Quality Management job function. They are responsible for managing the delivery of contractual services to ensure requirements are fulfilled.

What You’ll Do:

• Respond to client inquiries and concerns and ensure timely and quality service delivery and follow-up to ensure satisfaction.
  Understand the scope of the contract and make sure that all work is carried out accordingly.
  Be a financial and operational systems champion.
• Suggest efforts to put in place cost-saving opportunities to maximize customer and financial savings targets.
  Coordinate and onboard vendors for reactive and planned works and manage sub-contractor paperwork.
  Review processed invoices and ensure accurate cost center coding. Coordinate the billing application, calculating margins, raising invoices, and submitting to clients.
• Work closely with site teams and head office, ensuring accurate processing of quotations and purchase orders.
• Review and approve maintenance billing invoices and projects as per contracted agreements. Ensure consistent delivery of core operational and financial outputs on the account.
• Respond to inquiries on financial reports for Accounts Receivable, Payable, and open POs.
• Deliver monthly reporting support on Contract and Business Unit Reviews.
• Assist in ensuring compliance with Health & Safety requirements, including HSE reporting and promoting a safe work environment.
• Maintain QHSE documentation and ensure it is available using company systems.
• Gather and analyze data to identify and solve complex problems that arise with little or no precedent. May recommend new techniques.
• Impact own team and other teams whose work activities are closely related.
• Suggest improvements to existing processes and solutions to improve the efficiency of the team.
  
  What You’ll Need:
• High School Diploma or GED with 3-4 years of job-related experience.
• A comprehensive understanding of a range of processes, procedures, systems, and concepts within own job function is required.
• Ability to evaluate and communicate unusual and/or complex content in a concise and logical way.
• In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
• Organizational skills with an advanced inquisitive mindset.
• Advanced math skills. Ability to calculate advanced figures such as percentages, discounts, and markups.

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Provide advice and resolve creatively any emerging problems/deficiencies
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Comply with guidelines and regulations including permits, safety etc and deliver technical files other technical documentation as required
• Other ad-hoc duties assigned

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Scope :-

• Track, Monitor, Control & Update Work Progress on Site
• Plan & Schedule for Site Inspections according to Work Progress Status
• Coordinate and Schedule draw 3D Drawings & Sample Submission for Approval to client
• Conduct Regular Internal Review meetings with Trade Contractors for Site Arrangement, Work Progress, & Technical Resolutions
• Perform Authorities submission including MOM, LTA, NEC, SCA, and any others deemed necessary for the site nature
• Support current direct sales activities
• Creation for new customer
• Support distributor’s sales activities
• Creation, maintenance and management of Social Networking Services content in each country
• Sales Tool Preparation (Clinical Data)
• Business planning
• Contract & negotiation with new Distributor
• Network building with the same industry
• Cultivate new customers
• Other ad-höc duties assigned

Job Requirements :

• Engineering or above on Electrical or Mechcaniacl flied or related discipline any bachelor degree
• At least 3-4 years of experience in A&A work and technical coodinator to lead the bussiness
• Strong leadership to monitor workers for the works executed
• Demonstrate ability to handle Work independently and efficiently
• Good interpersonal skills and be able to interface with all levels, internally and externally, in a responsive manner.

Responsibilities:

Customer Service (60%)

• Represent OMEGA in dealing with customers’ concerns.
• To provide quality support to customers’ technical enquiries.
• To communicate with customers on his needs and request for service.
• To perform repair, installation and commissioning of Marine Communication and Navigational equipment.
• To troubleshoot complex technical faults, report findings and communicate with Projects, Sales and customers for solutions and feedback.
• Interact with end-users to explain the failure mode in detail.
• Travel to customer sites as circumstances dictate; 60-70% of the time will travel around the globe to attend to break downs & repair onboard vessels; otherwise in Singapore supporting the same activities.

Internal Liaison (25%)

• Assist the project team in project executions; in providing technical expertise in field/site works.
• Be responsible for the tools and parts issued under his care.
• To observe and implement the company EHS policy; ensure compliance with all safety policies, practices and procedures at all times.
• Able to meet project deadlines and prioritizing tasks time to time as scheduled.
• Any other duties assigned by immediate Superior.

Reporting (15%)

• To report the jobs carried out in the standard service report form; report the productivity hours and tasks performed.
• To summarize service reports per project for team for submission to the Manager, Service.
• To report on team’s achievements on a monthly and quarterly basis.

Requirements:

• Degree in Electrical & Electronic Engineering or equivalent.
• Min 4 year of relevant working experience.
• Basic knowledge on Network System.
• Good Knowledge on one or two of the following: telecommunication, public announcement systems, navigation systems.
• Service oriented with analytical and problem-solving skills.
• Willing to travel and staying overseas for a period of up to 4 weeks.
• Able to work independently and meet schedules.

OVERALL PURPOSE OF THE ROLE:

Supporting the Group Director, Marine Assurance in the continual drive and promotion of the highest standards of service delivery through the effective implementation of the HSSEQ Excellence Charter, V.MS, Assurance programs, audit standards, and associated policies, including accountability for;

• Acting as V.’s subject matter expert on Dry Bulk operations, compliance, and assurance, to ensure V.’s policies, processes, and operating standards remain up-to-date at all times, and are continually improved to meet customer, industry, and stakeholder demands

• In executing above, ensure that V.’s Assurance programs (onshore and onboard) are accurately and consistently reflecting the ‘real world’ demands and expectations of external audit and inspection programs, creating maximum internal learning and improvement opportunities, and overall service delivery performance

• Support in execution of annual Segment Engagement Plans that target customers, stakeholders, and industry bodies, ensuring consistent and proactive engagement that promotes and continually improves V.’s commercial successes within the Dry Bulk segment, globally

• Act as V.’s Group-level representative in Australia, ensuring proactive and effective engagement with AMSA and relevant local authorities, at regular intervals or when required on matters of PSC compliance or incident response.

KEY RESPONSIBILITIES:

Promoting a strong, proactive Culture of HSSEQ Excellence, through;

• Continually providing strong, visible, and proactive examples of HSSEQ leadership

• Promotion of a transparent & value-adding Marine Assurance culture across the Group

• Promotion of outstanding operational standards of excellence, especially to customers & external stakeholders

• Acting as change agent for the continual improvement of the Group’s service delivery performances

Marine Assurance Standards

Provide subject matter expertise on the development and continual improvement of policies, processes, and marine assurance standards for the relevant industry segment, ensuring the V.MS and all associated operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Marine Assurance Programs

Provide subject matter expertise on the development and continual improvement of V.Assurance programs and inspections for the relevant industry segment, ensuring such operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Customer & Segment Engagement

Supporting the Group Director, Marine Assurance in the planning, execution, and reporting of annual Segment Engagement Plans that grow V.s profile and customer engagement in the relevant industry segment, and supports our Commercial activities in remaining proactive and aware of customer and segment needs, and expectations.

PSC & Industry Engagement

Acting as a Group-level leadership representative with AMSA, an other regional PSC regimes as directed, to maintain working relationships at an equivalent level, ensuring V. is continually and proactively engaged in support of safe operations and effective service delivery, and supporting V. Executive Team members in securing and delivering additional such meetings and engagements, as required.

Incident Response

Acting as a Group-level leadership representative in event of incident for the interim period that relevant ShipMan MD/OD can reach the region to engage on behalf of DoC-holding office, and ensure that V.-managed crew and assets are engaged and cared-for during this period, and that V.’s interests are protected.

Incident Investigation

Where directed, provide subject matter expertise in investigation of all incidents where there are Marine Assurance impacts and/or learning opportunities, to ensure we maximise all relevant Marine Assurance learning opportunities, resulting in effective outcomes that drive continual improvement of related systems, processes, and policies.

SKILLS, QUALIFICATION AND EXPERIENCE REQUIRED

ESSENTIAL:

• Deep understanding of and experience in safe operations of Dry Bulk vessels

• Deep understanding of and experience in associated Dry Bulk vetting & inspection programs

• Excellent ability to make, maintain, and grow customer relations with key internal and external stakeholders

• Excellent ability to represent V. and themselves to the highest professional levels in external forums and stakeholder engagement events

• Ability to travel freely to/within Australia

• In-depth knowledge of industry standards, assurance & certification programs

• Significant experience in international compliance & certification programs

Significant experience in engaging and collaborating with multinational / multicultural teams.

DESIRABLE:

· Class 1 CoC (Deck or Engine)

· Good analytical and problem-solving skills

· Recognised academic or professional qualification in relevant field

· Willingness to travel

Existing relationships and good contacts with relevant industry stakeholders

OVERALL PURPOSE OF THE ROLE:

Supporting the Group Director, Marine Assurance in the continual drive and promotion of the highest standards of service delivery through the effective implementation of the HSSEQ Excellence Charter, V.MS, Assurance programs, audit standards, and associated policies, including accountability for;

• Acting as V.’s subject matter expert on Dry Bulk operations, compliance, and assurance, to ensure V.’s policies, processes, and operating standards remain up-to-date at all times, and are continually improved to meet customer, industry, and stakeholder demands

• In executing above, ensure that V.’s Assurance programs (onshore and onboard) are accurately and consistently reflecting the ‘real world’ demands and expectations of external audit and inspection programs, creating maximum internal learning and improvement opportunities, and overall service delivery performance

• Support in execution of annual Segment Engagement Plans that target customers, stakeholders, and industry bodies, ensuring consistent and proactive engagement that promotes and continually improves V.’s commercial successes within the Dry Bulk segment, globally

• Act as V.’s Group-level representative in Australia, ensuring proactive and effective engagement with AMSA and relevant local authorities, at regular intervals or when required on matters of PSC compliance or incident response.

KEY RESPONSIBILITIES:

Promoting a strong, proactive Culture of HSSEQ Excellence, through;

• Continually providing strong, visible, and proactive examples of HSSEQ leadership

• Promotion of a transparent & value-adding Marine Assurance culture across the Group

• Promotion of outstanding operational standards of excellence, especially to customers & external stakeholders

• Acting as change agent for the continual improvement of the Group’s service delivery performances

Marine Assurance Standards

Provide subject matter expertise on the development and continual improvement of policies, processes, and marine assurance standards for the relevant industry segment, ensuring the V.MS and all associated operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Marine Assurance Programs

Provide subject matter expertise on the development and continual improvement of V.Assurance programs and inspections for the relevant industry segment, ensuring such operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Customer & Segment Engagement

Supporting the Group Director, Marine Assurance in the planning, execution, and reporting of annual Segment Engagement Plans that grow V.s profile and customer engagement in the relevant industry segment, and supports our Commercial activities in remaining proactive and aware of customer and segment needs, and expectations.

PSC & Industry Engagement

Acting as a Group-level leadership representative with AMSA, an other regional PSC regimes as directed, to maintain working relationships at an equivalent level, ensuring V. is continually and proactively engaged in support of safe operations and effective service delivery, and supporting V. Executive Team members in securing and delivering additional such meetings and engagements, as required.

Incident Response

Acting as a Group-level leadership representative in event of incident for the interim period that relevant ShipMan MD/OD can reach the region to engage on behalf of DoC-holding office, and ensure that V.-managed crew and assets are engaged and cared-for during this period, and that V.’s interests are protected.

Incident Investigation

Where directed, provide subject matter expertise in investigation of all incidents where there are Marine Assurance impacts and/or learning opportunities, to ensure we maximise all relevant Marine Assurance learning opportunities, resulting in effective outcomes that drive continual improvement of related systems, processes, and policies.

SKILLS, QUALIFICATION AND EXPERIENCE REQUIRED

ESSENTIAL:

• Deep understanding of and experience in safe operations of Dry Bulk vessels

• Deep understanding of and experience in associated Dry Bulk vetting & inspection programs

• Excellent ability to make, maintain, and grow customer relations with key internal and external stakeholders

• Excellent ability to represent V. and themselves to the highest professional levels in external forums and stakeholder engagement events

• Ability to travel freely to/within Australia

• In-depth knowledge of industry standards, assurance & certification programs

• Significant experience in international compliance & certification programs

Significant experience in engaging and collaborating with multinational / multicultural teams.

DESIRABLE:

· Class 1 CoC (Deck or Engine)

· Good analytical and problem-solving skills

· Recognised academic or professional qualification in relevant field

· Willingness to travel

Existing relationships and good contacts with relevant industry stakeholders

Roles & Responsibilities

Job Description:

• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Perform site planning, coordination and inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Liaise with the BIM team to update the drawings or BIM Model with the latest information available timely
• Prepare as-built drawings or BIM Model and compile O&M Manual for submission
• To assist in project coordination and oversee of all Civil and Structural works on site and ensure all related activities are carried out as per drawings
• Review architectural & structural submission documents & submission drawings prior relevant authorities' submission
• Assist the Project team in site walk-down survey with other discipline engineers and Client representatives as required, in resolving technical issues until construction completion
• Liaise with internal and external parties for project management
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum of 2 years’ experience
• Recognized Degree in Civil Engineering, Project Management, Structural Engineering or equivalent approved by PEB, BOA or SISV
• Good knowledge of technical design and engineering, construction methodology and construction planning
• Good oral, written and inter-personal communications skills in dealing with individuals and groups at all levels
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment
• Obtain CONQUAS supervisor certificate will be added advantage

• To oversee the daily operations of QA/QC Department.
• To review and upgrade the quality control activities.
• To initiate, recommend or provide solutions throughdesignated channels.
• To liaise with authority on any relevant rulesand regulationson raw materials.
• To produce new mix design based on customer specifications.
• To implement and monitor Quality Assurance Programme.
• To maintain and improve the quality of ready-mixed concrete supply and execute appropriate corrective action.

Requirement:

• Diploma in Architectural; Civil/ Structural Engineering or Concrete Materials related.
• Preference given to those with 2-3 years' experience as a QC manager in Singapore construction industry, especially in readymix concrete. Senior QC Engineer position will be considered if the candidate is familiar with the trade.
• Dynamic, self motivated, proactive and results-oriented individuals
• Able to start within short notice period will be preferred.

Job Highlights

• Good Salary Package, Performance Bonus, Allowance
• 5 Day Work Week
• SAFE Working Environment

Job Description

Responsibilities

• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Pharmaceutical, Semiconductor etc.
• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.
• Propose improved materials or products to customers and explain the benefits of the changes.
• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.
• Preparation of sales proposal, quotations and attending customer’s enquiries
• Responsible for Sales target for Singapore region.
• Track and report sales activities; submit reports promptly.
• Be competent to undertake hands-on related issues arising from aftersales including onsite trouble-shooting.
• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.
• Contract review prior to order entry – Evaluate and interpret customers’ specification against our offer. Clarify with customer where necessary to resolve unclear requirements. Be responsible to coordinate with Order Administration team on shipment update and information going back to the customer up to the point of delivery.
• Working closely with customers to find application possibilities and propose suitable technical solutions.
• Conduct competitive analysis and identify market price for various suppliers and market segments in Singapore.
• Conduct product and application training if necessary.
• All other ad-hoc duties as assigned by the company.

Requirements:.

• Degree/Diploma in business, marketing, engineering or any relevant field.
• 1 to 2 years of sales engineering experience.
• Excellent communication, sales, and customer service skills.
• Salary depends on experience.
• Prefer with vehicle ownership.
• Self-motivated and ability to work in a team or independently with minimum supervision.
• Meticulous, organized and great interpersonal skills.
• Cheerful and pleasant personality.
• Excellent written and verbal communication skills.
• Able to converse and write in English and Mandarin.
• Mandarin language will be an advantage to communicate with Mandarin-speaking clients and suppliers occasionally.
• Computer literate, knowledge of Microsoft Office software. Outlook, Word, Excel and PowerPoint is a must.
• 2 years contract subject to convert full time staff.

Job Type

2 Years Contract

Handshakes is an award-winning DataTech company. We enable our clients to make safer, more informed decisions by delivering meaningful insights, harnessed from reliable data.

We are seeking a skilled Software Engineer with solid backend development skills to join our Software Engineering team. As a Software Engineer, you will collaborate with various teams to design and implement our API services, thus playing a vital role in the development of our resilient and high-performing solutions.

As a Software Engineer you will:

• Design and build robust, scalable backend systems
• Develop and maintain efficient APIs
• Troubleshoot and debug complex backend issues

As an experienced Software Engineer you would have:

• Minimum 2 years of experience as a backend engineer / software developer
• Proficiency in ANY or at least one of the following languages: Typescript, DotNet, C#, NodeJS, ReactJS
• Experience with relational databases particularly SQL
• Exposure to API design, Cloud (Azure or AWS) and Agile work environment a plus

If interested, apply here or send your profile or inquiries directly to [email protected].

We are not engaging with recruitment agencies and referrals from recruitment firms will not be entertained

We are seeking a proactive and detail-oriented Network Engineer to join our team and take ownership of critical network monitoring and security operations. This role involves overseeing the performance and connectivity of network devices, managing backups, implementing configuration changes, and ensuring the security and reliability of network infrastructure.

The ideal candidate will possess expertise in firewall management, network device hardening, and patch management to maintain robust and secure network operations. Hands-on experience with network automation tools, scripting, and certifications such as CCNA or CCNP will be advantageous.

Key Responsibilities:

1. Network Device Monitoring:

• Regularly check network devices for connectivity and performance.
• Monitor the health status of all network devices to ensure they are functioning correctly.

2. Backup Management:

• Perform regular backups of network configurations and critical data.
• Ensure backup processes are reliable and data can be restored efficiently.

3. Configuration Management:

• Implement and document configuration changes to network devices.
• Maintain accurate records of all configuration changes.

4. Firewall Rule Review:

• Regularly review and update firewall rules to ensure network security.
• Collaborate with the security team to address any vulnerabilities.

5. Network Device Hardening:

• Apply best practices to harden network devices against potential threats.
• Ensure all devices are configured securely and comply with company policies.

6. Patch Management:

• Apply patches and updates to network devices to protect against vulnerabilities.
• Keep track of patch levels and ensure all devices are up to date.

Preferred Skills:

• Certifications such as CCNA, CCNP, or equivalent.
• Experience with network automation tools and scripting.

Shortlisted Candidate will be Notified.

Job Description

We are seeking a dedicated Support Engineer professional to join our team to ensure the smooth operation of our systems and applications. The ideal candidate will have strong technical skills and be able to collaborate with various departments to support and maintain our software systems.

Responsibilities:

• Monitor and troubleshoot production issues (Linux VMs, Vendor Product, SFTP).
• Collaborate with cross-functional teams to identify and resolve production issues.
• Perform root cause analysis and provide solutions to prevent future issues.
• Create and maintain documentation related to production issues and resolutions via JIRA.
• Implement and maintain processes and procedures to improve production support.
• Provide daily, weekly, and monthly reports on system performance and issue status.
• Ensure proper deployment and release of software updates & infrastructure patches/upgrades.
• Participate in on-call rotation and respond to production issues after business hours. There are two shifts, Morning (7 AM to 4 PM) and Afternoon (2 PM to 11 PM), running 7 days a week.
• Deployments during silent hours.
• Development work within the vendor product (about 10%-20% of time).

Preferred Qualifications:

• Bachelor's degree in computer science or related field.
• 2–4 years of experience in Production Support or related role.
• Strong technical skills in Java, SQL, UNIX, and scripting languages.
• Ability to troubleshoot and resolve complex production issues efficiently.
• Excellent problem-solving and analytical skills.
• Effective communication skills to collaborate with cross-functional teams effectively.
• Willingness to participate in on-call rotation.

Job Summary:

Responsible for daily cloud operations, cloud implementations, and technical customer engagements. The role demands proficiency in basic operations, administration, and handling specific implementation projects or pilots in cloud environments.

Key Responsibilities:

• Execute cloud infrastructure operations, ensuring high performance, security, scalability, and reliability.

• Implement and deploy configurations with a focus on automation, adhering to design specifications.

• Collaborate with projects and team members to improve processes and optimize cloud environments.

• Maintain up-to-date certifications and knowledge of market trends in cloud and security technologies.

• Manage and resolve issues with proper documentation while meeting SLAs.

• Audit, review, and implement IT security policies.

Technical Expertise:

Database Activity Monitoring (DAM):

• Monitor database activity for unauthorized access and suspicious behaviour.
• Configure rules to detect SQL injections, privilege escalations, and anomalies.
• Perform access reviews to enforce least-privilege access controls.

Continuous Threat Vulnerability Library (CTVL):

• Maintain and update a repository of known vulnerabilities and threats.
• Integrate threat intelligence into vulnerability management programs.
• Collaborate with security teams to address high-priority vulnerabilities.

Nexpose (Vulnerability Management):

• Deploy and configure Nexpose for comprehensive vulnerability scanning.
• Customize scanning templates to meet regulatory and security requirements.
• Generate actionable remediation plans from vulnerability assessments.

Skills and Achievements:

• Proficiency in DAM, CTVL, and Nexpose tools to bolster security and manage vulnerabilities.

• Experience in integrating DAM and Nexpose with SIEM platforms for enhanced monitoring.

• Analytical and collaborative skills to translate technical findings into actionable outcomes.

Job Description

1) Liaise between suppliers, different sales sites, customers and factories.

2) Work closely with the design and engineering team of suppliers , customers and internal design centre in Japan and factories in Japan and Thailand.

3) Comprehend customer’s stipulated motor and base-plate design requirements

4) Review and resolve mould and part design matters / DFMs with solutions fit for volume production

5) Engage in the whole qualification / support cross functional audit of motor base assembly and base-plate production by customer and end customers.

6) Follow up with factories in Japan on data package preparation, sample preparation and prompt submission to customer

7) See through the product until it achieves customer’s final approval

8) Responsible for sales budgeting and forecasting

9) Resolve engineering/quality/cleanliness issues with suppliers and factories to ensure no disruption to customers

10) Manage day to day sales activities

11) To update Japan HQ on sales progress and translate English documents into Japanese language and Japanese work instructions / technical drawings into English language.

Requirements

• Degree in Electrical / Mechanical / Mechatronic Engineering or equivalent

• Min 2 years relevant sales experience in Japanese manufacturing MNC

• Good supporting knowledge in motor/base-plate mould and fabrication design

• Familiar with motor base assembly and base-plate manufacturing/machining processes/sequences

• Possess positive attitude, good inter-personal skills, strong leadership, self driven and able to work under stress and deliver assigned tasks under short notices

• Good problem solving / presentation / written skills

• Able to communicate with Japanese customers / vendors who speak little English.

• Able to translate documents & technical drawings from English to Japanese language

• Possess Class 3 driving license