Responsibilities:

• Define Product Architecture, Conceptualize and Prototype new designs based on specifications
• Participate in Design and Development of baseband analog/logic/digital circuit for wireless audio products.
• Perform circuit integration, schematic generation and circuit/system levels testing and optimization.
• Ensure design processes and documentation meets company requirements
• Work with a team of engineers and/or designers through different phases of the product development.
• Willing to travel overseas to support prototype builds and customers reviews

Requirement:

• Degree in Electrical/Electronics/Communication Engineering.
• Min 3 years experience in baseband design and Development
• Hands-on experience in design and test of Baseband/Audio/Power management is required.
• Knowledge of baseband system integration for audio, power, battery, memory and processor components are desired.
• Experience in audio/wireless hardware system design is an advantage.
• Analytical, independent, highly energized, good interpersonal skills, excellent communication skills and good leadership qualities.
• Excellent teamwork skills, flexibility, and ability to handle multiple tasks.

The above information on this description has been designed to indicate the general nature, and level, of the work performed by this position. It is not designed to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

Interested candidates may also apply or write in to CS Chua, EA 12C6130/ R1548619 [email protected]. Shortlisted candidates will be contacted for a discussion.

Job Requirements:

Education:

• Bachelor’s degree in Civil Engineering, Construction Management, or related field.

Experience:

• Minimum 3–5 years of relevant experience in construction project management in Singapore.
• Hands-on experience with local construction projects and regulatory requirements.

Skills:

• Proficiency in project management tools (e.g., MS Project, Primavera) and CAD software.
• Strong understanding of construction methods, materials, and local building regulations.
• Excellent leadership, problem-solving, and time-management abilities.
• Effective communication skills to liaise with stakeholders at all levels.

Key Responsibilities:

• Plan and execute construction projects, including budgeting, scheduling, and resource management.
• Collaborate with architects, contractors, and consultants to ensure project alignment with design specifications.
• Supervise on-site activities to ensure adherence to safety, quality, and compliance standards.
• Resolve technical and operational challenges during project execution.
• Prepare and present progress reports to stakeholders.
• Ensure compliance with Singapore's building codes, safety regulations, and environmental standards.

Responsible for creating, improving, and protecting our immediate environment. They plan and oversee construction and rebuilding, as well as the maintenance of roads, bridges, tunnels, railways, dams, harbors, power plants, and airports.Managing, designing, developing, creating and maintaining construction projects,Conducting on-site investigations and analyzing data,Assessing potential risks, materials and costs.

• Create ATE (Advantest SmarTest PS1600 & EXA Scale) test program and integrate various test functions in test flow to support First Silicon bring up for wafer and package in NPI phase.
• Perform design validation/characterization/experiment on ATE across process, voltage, frequency and temperature. Evaluate test and product margins, debug and communicate result/yield/analysis to various teams.
• Utilize ATE test tools and other test instrument to debug and analyze the test, design and product issue.
• Support ATE test hardware design (Including build instruction, SI/PI...etc.) and debug.
• Support test time reduction.
• Support proto demands/qualification for IP owner and customer requests.
• Complete test development, test program transfer and product release at respective milestones.
• Initiate, plan and execute multiple projects to achieve target.
• Good knowledge of product engineering, failure analysis and manufacturing test process.
• Interest in learning, researching, sharing and implementing new technology and test methodology.
• Good written/Oral communication skills.
• Result orientated and team work.

Responsibilities:

• Customises CMS database checksheets and allocation of checksheets based on latest engineering drawing revisions and punchlist updates for mechanical/ process/safety /HVAC discipline
• Prepares boundary drawings as per subsystem listing
• Prepares procedures/ work method statements and risk assessment for mechanical/ process/ safety/ HVAC commissioning activities
• Attends Factory Acceptance Test at vendors' premises, as required
• Leads a team of mechanical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides
• Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability
• Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities
• Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner
• Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities, etc
• Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc
• Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures
• Reviews completed commissioning documentation such as checksheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.
• Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

Requirements:

• Min. 5 years years of commissioning experience in the Oil & Gas/ Wind Farm industty
• Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc
• Good knowledge and experience in commissioning activities of oil and gas/ wind farm facilities
• Familiar with permit-to-work systems and lock-out tag-out procedures
• Good analytical, problem solving and planning skills.
• Familiar with Project Specifications, Technical and HSE Standards
• Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.
• Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Amiralty Yard)

60 Admiralty Road West, Singapore 759947

(Tuas Yard)

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

· Responsible for all conceptual design, mechanical design, cost control, fabrication parts and BOM generation of automated equipment.

· Support RFQ proposal, documentation for manual, ECN, work instruction, specification and test plan.

· Responsible for project co-ordinating and project timeline control

· Good knowledge of using solid works 3D cad software a must.

· Knowledge in motor, pneumatic component, sensors and LM parts selection.

· Minimum 2 year of working experience

· At least a Diploma or ITE in Mechanical/Mechantronic

This is an exciting and fast-paced position! Our team Application Development & Support(ADS) delivers software solutions to leadership and engineers throughout Micron's global manufacturing network. As Operations Central Team (OCT) Software Development Engineer at Micron Technology, Inc., we have the chance to create and improve Micron systems and processes on a global scale.

Collaborate with customers across departments and geographical sites to design, develop, innovate and support software throughout the development life cycle. Be part of the team to support efficient business processes by maintaining a focus on global alignment, and participating in efforts to research and influence technology roadmaps.

Responsibilities:

• Demonstrate Micron core values People, Innovation, Tenacity, Collaboration, and Customer Focus
• Gather requirements by working closely with customers
• Design, develop, debug, document, test, and deploy applications
• Collaborating with other developers on the team
• Working closely with Business Operation Teams, Product and Application Development teams, and other internal customers during application development and deployment
• Provides 24x7 Support

Project Description

• Join an agile team to develop a web solution for Micron globally, including but not limited to API, ETL, and database projects.
• Work on new or existing projects.

Learning Outcomes

• Gain hands-on development experience in modern tools and pioneering tech stacks (Angular, OpenShift, Azure)
• Learn to work effectively in the Agile development team to develop successful product with timely delivery
• Gain domain knowledge on semiconductor industry
• Develop problem-solving and analytical skills and good software engineering practices
• Enhance communications, interpersonal, and other critical skills in the professional environments

Qualifications and Traits

• Proficient in Angular, .NET Core, C#, and SQL.
• Knowledge of containerized deployment with Docker, Kubernetes, and OpenShift is a plus.
• Strong analytical, problem-solving, and interpersonal skills.
• Motivated to work in a dynamic and fast-paced environment.
• Ambitious and driven to complete tasks independently while recognizing ways to improve processes.
• Active team participation, partnership, and consensus-building skills.
• Good verbal and written communication skills.

Education Required

Bachelors Degree or equivalent experience in Computer Science or related field of study

Experience Required

2 years of experience in 3 or more of the following:

• Experience in front-end web development (preferably Angular, ASP.NET)
• Proficiency in C# and Object Oriented Programming
• Proficiency in HTML, CSS, JavaScript
• Experience in RESTful Web API development (preferably ASP.NET Core, Node.js)
• Experience with Agile development methodologies
• Good understanding of one or more database technologies (MSSQL, ORACLE, Snowflake, MongoDB, CouchDB)
• Experience in SSIS, SSRS, Tableau, PowerBI or any Business Intelligence technologies Bonus if you have experience in Python and cloud programming, CICD (Azure), NiFi
• Knowledge of source code repositories (Git)
• Knowledge of SQA is a bonus

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Assisting the Support Engineer or Software Engineer in problem resolution beyond the capability of the 1st Level Support Staff.

• Performing system recovery if needed.

• Escalating unsolvable problems to the 3rd Level Support Staff and reports the escalation to superior.

• Ensuring that the System runs according to contractual specifications after problem resolution.

• Providing advice on system / database performance monitoring and tuning.

• Ensuring deployments of approved patches/releases are implemented accordingly to Change Request.

• Complete all Service Requested accordingly to SLA timeframe.

• Assisting the Customer in the verification, isolation and/or provision of a temporary work-around for the problem logged beyond 2nd Level Support Staff capability.

• Escalating unsolvable system problems and service request to the OEM/Vendor for technical support.

• Coordinating system development tasks to include design, integration and formal testing on the Change Request.

• Overseeing all transitions into production on the Change Request.

• Developing and complete actions in system specifications, technical and logistical requirements and other disciplines on the Change Request.

• Creating and maintain programmatic and technical documentation to insure efficient planning and execution on the Change Request.

• Managing and document system configurations on the Change Request.

• Perform troubleshooting and resolve incident based on SLA.

• Generating the relevant administrative records and reports.

Responsibilities

• Design and implement electrical systems for construction projects.
• Prepare detailed project plans and specifications.
• Conduct site inspections to ensure compliance with electrical codes and standards.
• Troubleshoot and resolve electrical issues on-site.
• Coordinate with project managers, contractors, and other engineers.
• Ensure all electrical work is completed on time and within budget.
• Maintain accurate records of all electrical work performed.
• Provide technical support and guidance to other team members.
• Review and approve electrical designs and plans.
• Ensure all electrical systems are safe and operational.
• Conduct risk assessments and implement safety measures.
• Stay up-to-date with the latest electrical engineering technologies and practices.
• Prepare and present reports on project progress and electrical issues.
• Manage and supervise electrical contractors and subcontractors.
• Ensure compliance with all relevant regulations and standards.
• Participate in project meetings and provide input on electrical matters.
• Develop and implement maintenance schedules for electrical systems.
• Assist in the procurement of electrical materials and equipment.
• Provide raining and support to junior engineers and technicians.

Requirements

• Bachelor's degree or Diploma in Electrical Engineering or a related field.
• Minimum of 3 years of experience in electrical engineering

The intern will work in the Production department of Keystone Cable factory. He will report to the Plant Manager (mentor) and work alongside engineers / technicians to identify opportunities for factory operations efficiency and productivity improvement.

Expected tasks / responsibilities

1. Job shadow / On-job training, OJT of Production Engineer to understand cable manufacturing process.
2. Problem understanding of current methods of manual production data collection with the intent of improving the process flow and to digitize where possible.
3. Data acquisition of shop floor data to set baseline targets for production improvement
4. Research and testing of hypothesis on production parameters we want to improve
5. Project management of one or two projects to improve factory productivity / efficiency using existing or acquired skillsets.

Learning outcomes and objectives

1. To allow intern to gain a good understanding of the work and responsibilities of a production engineer in a factory.
2. To project manage one or two projects that tackle factory productivity and efficiency problem statements.
3. To apply and extend intern’s skillsets on shop floor data collection and analysis with the objective of improving existing factory systems.
4. To allow company and intern to assess compatibility for potential collaboration opportunities in the future.

Requirements

Personal traits requirements: Respect for individual, Team player, Good communication skills, Willing to accept new challenges and learn.

Technical requirements: Industrial control and automation, Power systems, PLC systems, Basic programming skills will be a plus: Python, SQL database. MS Office proficiency

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond August

Position Overview: We are seeking a motivated and detail-oriented Project/Site Engineer for Architectural and Structural systems to assist in the supervision, coordination, and execution of construction projects. The ideal candidate will play an integral role in managing various site activities, ensuring quality control, and facilitating communication between internal teams, subcontractors, and clients.

Key Responsibilities:

· Assist in architectural system site supervision works, ensuring quality and progress.

· Coordinate project planning, documentation, and execution of works on-site.

· Oversee project works, manpower mobilization, material planning, and ordering.

· Communicate internally with various departments and externally with clients and subcontractors.

· Coordinate and follow-up on project submissions to authorities.

· Produce regular site progress reports and submit necessary documentation.

· Attend meetings and conduct site inspections to ensure quality control.

Additional Responsibilities:

· Manage all aspects of architectural system site works.

· Supervise manpower scheduling and deployment to meet project timelines.

· Ensure the timely completion and quality of subcontractor works.

· Prepare and submit method statements and other required reports.

· Review and monitor architectural and structural system drawings and approval statuses.

· Collaborate with project managers and stakeholders to resolve site issues.

Qualifications and Requirements:

· Minimum 1-5 years of experience in construction projects.

· Strong communication skills and ability to interact with people at all levels.

· Familiarity with project management processes across all project stages.

As the Facilities SmartFac & Control Engineer, you are required to lead engineering and maintenance works in the fields of SMART Fac and Control systems on site, with the necessary guidance and direction from Facilities organization, to achieve facilities department, site, facilities corporate and company goals.

• Lead on site Smart System transformation and on implementation of Smart FAC projects with AI-enabled detection and analytics in collaboration with other Micron Departments.
• Lead on Sustainability and Environmental Control system deployment with early detection and predictions, using Industry 4.0 system.
• Lead on labor productivity automation projects with innovative idea to improve facilities team efficiency.
• Plan, design and lead Control Automation engineering projects includes new construction, system upgrading and quality improvement.
• Lead troubleshooting and attend to abnormalities in support of Operations in a timely manner on system under Smart FAC & Control section when required.
• Lead on the planning and supervise Preventive and Corrective Maintenance work activities, priorities and reallocate resource when required.
• Perform capacity tracking and planning for Instrumentation and Control systems.
• Acquire estimated cost and raise purchase requisition for service or parts necessary for repair and maintenance purpose, when required.
• Utilize computer base software to document and analyze records of work order and equipment history.

Job Requirements:

• Bachelor Degree in Electrical/Electronics/Computer engineering or equivalent related field.
• Good knowledge on Python, Java, C/C++, C#, SQL, machine learning.
• Good knowledge in programming of programmable logic controller (PLC) and process automation PID control.
• Good knowledge of various handheld tool, portable and panel measuring device and equipment.
• Ability to understand and use schematic, single-line drawing and related equipment and system documentation
• Ability to work in a team environment with various professional level.

• Site Supervision:Oversee on-site construction activities to ensure progress matches project schedules.
  Monitor subcontractor work and ensure quality compliance.
  
• Technical and Design Implementation:Interpret and implement construction drawings and plans.
  Assist with layout, leveling, and surveying activities on-site.
  
• Project Coordination:Work closely with project managers, architects, and subcontractors.
  Ensure materials and resources are available for smooth execution.
  
• Quality Assurance:Conduct quality checks and inspections to ensure work meets design and safety specifications.
  Address technical issues and resolve problems promptly.
  
• Health and Safety Compliance:Enforce site safety regulations and report hazards or risks.
  Ensure all work complies with local construction and safety laws.
  

Your responsibilities will include, but are not limited to

• Manage network tool utilizations strategies and benchmark performance to optimize the company’s deployed capital
• Manage and communicate improvement and implementation plan to all relevant levels and functions in Manufacturing
• Optimize capacity of install equipment and lead sites and tool level optimization studies for throughput enhancement
• Collaborate with partners to understand future tool and process roadmaps. Able to assess network capacity impacts of process changes
• Improve financial analyses before capital equipment are purchased through automating metrics optimizations, process flexibility, capacity sharing and equipment repurpose
• Attention to detail and ability to work in situations where changes is fluid
• Ability to spot, question and highlight differences to drive resolutions with relevant stakeholders

Requirements :

• Bachelors’ Degree in Engineering, Computer Science, or a Business-related or quantitative field (Finance, Economics or similar discipline). MBA or Master’s degree is a plus
• Experience turning complex and ambiguous problem statements into structured solution while working in a highly multi-functional environment
• Experience operating independently while maintaining a high degree of organization, control and change management
• Experience analyzing and interpreting data, drawing conclusions, defining recommended actions, and reporting results cross diverse technical and non-technical groups
• Experience working in teams, establishing and maintaining multi-functional relationships
• Experience in a combination of capacity analysis, business analysis or process analysis is advantageous

Work Location

• F16 Taichung, Taiwan
• F15, Hiroshima, Japan
• F10A, Singapore

Job Overview:

The Assistant Project Engineer will report directly to the Project Manager and manage ACMV (Air-Conditioning and Mechanical Ventilation) works within the built environment. The role involves ensuring that all project activities comply with engineering and contractual requirements. This position requires collaboration with the design department to meet engineering and safety standards, while overseeing contracts, costs, schedules, and overall project completion.

Key Responsibilities:

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Support the development and maintenance of the BIM model, ensuring it is accurate and up-to-date.
• Assist in the preparation and management of project documentation, including drawings, specifications, and reports.
• Collaborate with the client to help meet their requirements under the guidance of the Project Engineer
• Assist in verifying changes to project scope, schedule, or budget, ensuring compliance.
• Help in resolving technical or contractual issues that arise during the project, with the support of the senior team.
• Provide assistance in managing the construction process to ensure it progresses on time, within budget, and meets quality standards.
• Support monitoring the performance of contractors, ensuring they meet their obligations.
• Coordinate with various consultants and contractors, under the guidance of the Project Engineer.
• Assist in the handover process of the project to the client.
• Comply with all relevant Singapore regulations and standards under the supervision of senior project staff.
• Promote safety management activities and assist in compliance inspections.
• Assist in obtaining necessary permits and approvals.
• Support sustainability efforts and ensure the project adheres to environmental standards.
• Help minimize disruption to the public during construction by coordinating with authorities.

Requirements:

• Diploma or Degree in Mechanical Engineering, Building Services, Project Management, or a related field. ACMV project experience is preferred.
• Bizsafe Level 2 safety certification or higher preferred.
• A minimum of 1 year of experience in a related field is preferred, though fresh graduates are welcome to apply.
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Career development focused on progression and growth.
• AWS included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.

Responsibilities:

• Develop and execute API/UI/Functional tests with CI/CD.
• Design, develop and maintain automated test framework, tools and test cases
• Work in a scrum team of software developers and domain experts. Accountable for quality of the software product under development.
• Perform manual testing when necessary.
• Software release following SGLC guidelines. Collaborate with peers to identify opportunities for process improvement.
• Participate in design and code reviews
• Learn, grow and have fun with highly capable engineers and scientists from various disciplines in a global R&D team

All listed tasks and responsibilities are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Who we are looking for:

• Strong understanding in automated testing using at least one programming language, such as Python, Java, C#, TypeScript or JavaScript
• Strong understanding in Linux Shell scripting or equivalent command line tools
• Knowledgeable with software test methodologies such as API, Web, GUI, performance testing, with hands-on experience in frameworks and tools such as Karate, Cucumber, Gherkin and Playwright
• Strong analytical capabilities and able to troubleshoot complex issues
• Good knowledge with CI/CD tools such as Jenkins, TeamCity, GitHub Actions
• Strong understanding in databases such as MySQL or PostgreSQL, cloud computing such as Amazon Web Services and Docker/Kubernetes is a plus
• Solid understanding of SDLC processes
• Be curious, detail oriented, and analytical, with a proven ability to learn quickly
• Proactive and team-oriented with strong collaboration skills; comfortable working across functions and time zones

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Preferred Experience/Education:

• Typically requires a minimum of 0 - 2 years of related experience with a Bachelor’s degree
• Experience in biotech and bioinformatics is a plus

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects.

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.

· To prepare final design configurations, layouts, solid models and production/engineering data.

· To assist in preparation of machine documentation, specifications, manual.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, resourceful and organized.

Job Requirements:

· Degree/Diploma or relevant in Mechanical Engineering.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable.

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Qualified candidates please send your application with full resume stating current and expected salary.

DESCRIPTION

- Sizing, calculation, design layour, quantities and estimation based on drawings

- Provide technical support to sales team

- Prepare quote and technical proposal

- Attend meetings with consultants, engineers and clients

- On site troubleshooting/servicing work, resolving technical issues including system testing and commissioning

- Any adhoc tasks assigned by the management from time to time

REQUIREMENTS

- Knowledge in electrical and electronics

- Competent in AutoCAD

- Knowledge of BIM

• Perform assembly, testing, and maintenance of mechanical, electronic, or automated equipment.
• Adhere to operational protocols to ensure quality control and proper functionality of equipment.
• Collaborate with engineers to diagnose malfunctions and enhance system performance.
• Assist in documenting testing procedures and results.
• Maintain a safe and organized work environment, complying with workplace safety standards.

Requirement:

• Degree in Electrical and Electronics Engineering field;
• Familiar with details and installation processes;
• Familiar with various design, installation and fabrication drawings

Position Summary

Responsible for new product introduction Production Tooling Development, and production support engineering for a specific product or group of products after transfer from design to in-house or outsourced production. Interfaces with design, process, test, reliability and manufacturing engineering to solve product issues and production problems. Develops and sustains process improvements to reduce production costs and increase yields.

Position Responsibilities:

• Support and drive production tooling development activities during NPI and sustaining phases.
• Support and drive activities to ensure successful product transfer into manufacturing.
• Drive troubleshooting, failure analysis, root cause analysis, issues closure and corrective action processes as required.
• Establish and maintain databases of Production Tooling.
• Perform data trending analysis, construct and execute design of experiments to address yield and quality issues.
• Drive and implement process improvements and product sustaining activities to meet the production goals.
• Drive maintenance and improvement activities on test fixtures and equipment.
• Drive and implement cost reduction activities by perform engineering evaluation to qualify new or improved materials, processes and products.
• Apply various analysis techniques, such as FMEA and statistical analysis to optimize product quality and minimize cost, providing all calculations, performance data, and drawings required on new and existing products.
• Manage and coordinate Engineering Change Order implementation activities including scrap analysis, material disposition, update work instructions and test requirement changes.
• Documentation responsibilities include, but not limited to, generating detailed engineering drawings, Bill of Materials, test reports, assembly procedures and design validation plans.
• Work closely with contract manufacturing partners and key suppliers to ensure smooth transition of quality products from development into manufacturing.
• Applies basic problem-solving techniques to define and resolve routine issues.
• Determines a course of action based on guidelines.
• Works on assignments of limited scope where answers can be readily obtained and problem solving requires following standard practices/procedures.
• Develops working relationships internally.
• Exchanges standard/basic information with colleagues, immediate supervisor, project leaders and other professionals in the team/group.

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements (Experience/Education/Skills):

• Bachelor’s Degree or Masters in Mechanical or Electro-Mechanical Engineering

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Typically requires a minimum of 2 years of related experience with a Bachelor’s Degree; or 1 year and a Masters degree; or a PhD without experience; or equivalent work experience.
• 2+ years of engineering experience in mechanical or electro-mechanical based products for commercial and industrial markets.
• Good working knowledge and experience in enclosure and chassis, structure, mechanism design and electro-mechanical systems.
• Strong organizational skills, attention to detail and accuracy, and the ability to work independently in a team environment are essential.
• Solid knowledge of GD&T, plastic & sheet metal tooling, casting, mechanism, stress analysis, mechanics, machining and standard manufacturing processes.
• Candidate must be able to effectively work together as a team, interface well with the manufacturing and service organization, and has a proven track record of transferring products to manufacturing.
• Must possess good analytical and troubleshooting skills.
• Proficient in engineering tools such as, statistical analysis, design of experiments, product and process capability analysis.
• Proficient in Solidworks or 3D CAD tools.
• Good working knowledge of BOM (Bill-Of-Material) structuring fundamentals and have the ability to create ECOs (Engineering Change Order) and Deviations.
• Demonstrated use and understanding of MRP systems, Product Data Management systems and Change Control processes. SAP & PLM experience will be added advantage.
• Experience with FDA regulated medical device product development preferred.
• Product development experience in the life sciences, biotech, biomedical, nanotechnology or semiconductor industries preferred.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally.
• Strict adherence to Micron Intellectual Property protection policy is a must.

Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcomed to apply.
• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport
• 2-3 years of experience in Semiconductor Equipment/Process development is preferable
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development.

Keysight is the world's leading electronic measurement company, helping scientists and engineers address their toughest technical challenges with confidence through innovations in wireless, modular, and software solutions. Our employees leverage their insight and passion to deliver measurement solutions in wireless communications, aerospace and defense, and semiconductor markets with world-class platforms, software and consistent measurement science. This job will be part of the Communications Solutions Group, which is responsible for Keysight's portfolio in the Wireless Data Ecosystem, including wireless devices, operators, internet infrastructure, and Aerospace & Defense. Our software-centric solutions accelerate our customers' time to market and reduce their costs - giving them a competitive advantage in today's and tomorrow's technology waves.

Job Description

This position is for a full-time Software Engineer to join Keysight’s Quantum Engineering Solutions (QES) organization, which is responsible for producing world-leading solutions in quantum technologies, including quantum computing, quantum communications and quantum sensing. As a Solution Developer, you will be part of an R&D team and launch breakthrough software solutions to market. You will engage in every stage of our product development process, addressing intricate technical challenges in a customer-centric environment. Your role will focus on integrating open-source quantum computing software with quantum control systems, ensuring seamless execution of workflows in HPC and cloud environments. You will design and implement scalable cloud-based solutions for quantum workloads, collaborate with cross-functional teams to develop integration tools, and optimize HPC workflows for distributed quantum computing operations.

Job Responsibilities

• Integrate open-source quantum computing software with quantum control systems to enable seamless execution of experiments and workflows in cloud environments.
• Design and implement scalable cloud-based solutions for quantum computing workloads, ensuring high performance and efficient resource utilization.
• Collaborate with cross-functional teams to develop APIs, libraries, and tools that enhance the integration of quantum software and control systems.
• Work closely with technology teams in an Agile environment to integrate cloud services and optimize operational efficiency.
• Ensure best practices in cloud operations, establish key performance indicators, and develop and enforce cloud security and compliance measures.

Job Qualifications

• BS/MS in Computer Science, Computer Engineering, or equivalent.
• Over 5 years of experience, including leading cloud platforms in public cloud environments.
• Strong experience with High Performance Computing (HPC) and cloud platforms, including deploying and optimizing distributed computing workflows for high-performance applications.
• Proficiency in Python, C#, C++, JavaScript, and other modern programming languages (e.g., Golang, Julia).
• Experience in integrating complex software systems, including APIs, libraries, and tools, with a focus on performance, scalability, and reliability.
• Proven experience as a Cloud Engineer.
• Good knowledge of DevOps practices.
• Familiarity with cloud security, compliance, and cost management.
• Good understanding of quantum information science is desired but not mandatory.
• Excellent analytical and troubleshooting skills.
• Ability to work in a collaborative environment and to develop teamwork among individuals and over geographically disperse teams.
• High tolerance for ambiguity, results-oriented, meets timelines, handles pressure while working positively in a collaborative manner.
• Excellent written and verbal communication skills
• Willingness to learn proactively.

Job Summary

· To develop Motion Control Solutions and algorithm for precision stages and robotic applications

· To develop R&D product development integration with motion control solutions

· Evaluation of R&D product performance

Job Responsibilities

1. Development of Motion Control with complex motion profile requirement for jerk reduction, vibration control

and force control

2. Development of R&D products in accordance to motion control solutions

3. Technical review of motion control products, including controllers, drivers, encoders and any peripherals

4. Provide technical support for product range including motion controllers, PLC, HMI, motor drives, DDT motors

and actuators, encoders and robotic arms.

5. Diverse a vibration monitoring system for predictive maintenance investigation

People Requirements

1. PhD/Degree / Diploma in any Mechatronics, Electrical, Electronic, Control or relevant Engineering discipline

2. Familiar and knowledgeable in Closed-loop Control systems and precision engineering

3. Knowledgeable in control systems principles and electrical fundamentals

4. Programing in C#

5. Self-motivated and good communication skills

Responsibilities:

• Performs all SQS work assignments in accordance with the standard work procedures, practices and specifications
• Review of Vendor Documents for Compliance to project requirements/ spectification and international standards
• Implements and adminsters the Quality Assurance Plan manifested by QA Supervisor for field and participates on a day to day basis in quality assurance activities.
• Review and approval of quality related specification, painting procedures, SAT and FAT procedures, NDT procedures, EIT related documents, pre com and commissioning documents
• Prepares and issue QAQC reports
• Organizes and perform audits and surveillance at a supplier's (or their sub suppliers) facility to verify compliance with qualification requirements
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor's Degree in Naval Architecture / Marine and Offshore / Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Well conversant with codes & standards like ASME, API, ANSI, AWS, IACS, ABS, NR etc

Our Addresses and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.