Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

Requirements:

• Degree in Civil Engineering or its equivalent
• Minimum 3 years of working experiences in construction industry.

• Candidate must possess at least Bachelor's Degree in Engineering (Civil & Structural) from local or recognized foreign universities subject to Client's approval
• 3 years & above working experience in the related field is required for this position
• Perform Engineering Design and drawings
• Project coordination and documentation
• Perform building/site inspections.
• Attend progress meetings.
• Work related travel and meetings
• Any other duties as assigned

Job Requirement

• Keen to learn and work independently with minimum guidance.
• Able to work under pressure, dynamic, creative and results oriented.
• Conversant in regulatory requirements and building codes.
• Good knowledge of AutoCad and Revit.
• Possess Class 3/3A driving license preferred.

Job Summary:

We are seeking a talented and motivated Data Engineer to join our Software Engineering team. In this role, you will play a key part in designing, developing, and maintaining ETL processes using the Talend ETL toolset. You will work closely with team members to extract, transform, and load data from diverse sources, ensuring data integrity and quality. This position offers the opportunity to work on cutting-edge technologies like Hadoop, Spark, and Python, while contributing to impactful projects.

Key Responsibilities:

· Design, develop, and maintain ETL jobs using the Talend ETL toolset.

· Create ETL pipelines to extract, transform, and load data from multiple sources, including Cloudera, PostgreSQL, and SQL Server databases.

· Develop and optimize database tables and apply constraints to meet business requirements.

· Collaborate with team members to analyse source system structures and data retrieval methods.

· Support the development of data transformation logic using SQL, Python, and other scripting languages.

· Clean, validate, and transform data to meet schema and quality standards.

· Work with the team to implement data quality improvement plans.

· Troubleshoot data integrity and process issues to ensure efficiency and accuracy.

Technical Skills & Experience Required:

· Hands-on experience with Talend ETL tools (e.g., Talend Studio).

· Strong programming skills in Python and experience with Apache Spark.

· Proficiency with Hadoop ecosystem tools, including Hive, Impala, and HDFS.

· Solid understanding of data warehousing and data modelling techniques.

· Familiarity with relational databases such as PostgreSQL, SQL Server, and distributed systems like Cloudera.

· Experience with data visualization and analytics tools (e.g., Tableau, Power BI, etc.).

Qualifications:

· Bachelor’s degree in computer science, Mathematics, Engineering, or a related field.

· Strong interpersonal skills with a collaborative mindset.

· Excellent communication skills to interact with team members and projects effectively.

· A positive attitude and a proven ability to work within a team-oriented environment.

Soft Skills:

· Team player with strong problem-solving skills.

· Willingness to learn and adapt to evolving technologies.

· Ability to work under minimal supervision and meet project deadlines.

Job Descriptions

• Reporting to Tunnel Manager
• Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.
• Prepare method statements, safe work procedures, risk registers, tunnel progress reports, and other tunnel-related documentation.
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule
• Work closely with subcontractors on project progress and ensure timely work arrangements.
• Plan and monitor and track site progress, manpower mobilization, and equipment deployment
• Liaise with consultant and carry out site inspection.
• Maintain quality standards, carry out site inspections and resolve technical issues on time

• Activity and resource planning for site.
• Organizing and motivating a project team at site.
• Controlling time management for site.
• Cost estimating and developing the budget for site project.
• Ensuring customer satisfaction.
• Analyzing and managing project risk.
• Planning and monitoring progress of the project.
• Managing reports and necessary documentation.
• Designing and applying appropriate project management standards.
• Managing the production of the required deliverables.
• Preparing and maintaining project, stage and exception plans as required.
• Managing project risks, including the development of contingency plans.
• Monitoring overall progress and use of resources, initiating corrective action where necessary.
• Applying change control and configuration management processes for the site project.
• Experinces in Singapore Process Plant Industry.

Job Responsibilities:

1. Responsible for the electrical design of the company's equipment, including electrical diagram drafting, selection of electrical components, and electrical control system programming.
2. Participate in the installation, debugging, and maintenance of electrical equipment to ensure stable system operation.
3. Develop optimization plans for electrical systems to improve equipment operating efficiency and safety.
4. Analyze and resolve electrical faults during equipment operation and provide technical support.
5. Prepare electrical technical documentation according to project requirements, including electrical schematics, wiring diagrams, and operation manuals.
6. Keep up with the latest industry technologies and suggest improvements for electrical systems.
7. Collaborate with related departments such as mechanical and process engineering to ensure smooth project implementation.

Job Requirements:

1. Bachelor's degree or above in Electrical Engineering, Automation, or related fields.
2. Familiar with mainstream PLC programming and applications (such as Siemens, Mitsubishi, Omron, etc.), with experience in touchscreen and human-machine interface development.
3. Proficient in electrical schematic drawing software (such as CAD, electrical drafting tools).
4. Familiar with national standards and industry regulations related to electrical systems.
5. Experience in the design and maintenance of low and high-voltage distribution systems is preferred.
6. Strong problem analysis and solving skills, with a good sense of teamwork.
7. Electrical qualification or related certification is a plus.
8. 1-3 years of relevant work experience (exceptional recent graduates will also be considered).

• To promote a Zero Harm culture & best practices through the implementation of a tailored safety, quality and environmental management system including the development and implementation of appropriate policies & procedures to ensure a safe and efficient workplace.
• To ensure regulatory compliance & due diligence to safety, health, quality, dangerous good/hazardous substances and environmental obligations.
• To liaise with all business units on matters relating to safety, quality and environment including potential non-compliance of a regulatory nature.
• Compliance with all relevant safety, quality, environmental & P&C policies & procedures to ensure a safe work environment at all times.
• Actively liaise with all departments to ensure quality control, quality assurance and safe practices are adhered to at all times.
• Work with A-Gas management to implement its policies, procedures, work instructions, mission and goals.
• Lead by example in demonstrating personal qualities, behavioural traits and A-Gas values & behaviours.
• Timely management reporting in the manner and form as required from time to time.
• Perform site inspections as required.
• Actively participate in internal & external project meetings and provide sound recommendations on SQE initiatives and/or highlight any deviations & possible risks if any.
• Manage & maintain integrated certified Safety, Quality, Environmental management systems to ensure continued compliance to ISO 9001, ISO45001, ISO14001, ISO17025 (NATA), and other relevant standards like ISO 31000 where applicable.
• Identify and maintain compliance to relevant WHS, Environmental & other acts, regulations, codes of practices & guidelines etc.
• Audit SQE Management System, including reviewing, monitoring, measuring, reporting on performance.
• Recommend and implement continual improvement to the SQE system, work instructions and associated processes.
• Promoting awareness of SQE requirements, communicating and consulting with all staff & other stakeholders on SQE processes, documentation and regulatory requirements.
• Development and implementation of SQE documentation relevant but not limited to procedures, plans, hazard and aspect identification, risk assessments, emergency preparedness & response, design & development, management of change, control measures, management review including ad hoc measures based on current environmental occurrences.
• Actively lead & participate in Operational Safety, Process Safety, Risk Assessment, HAZOPs, Pre-Purchase Risk Assessments, Management of Change & Design & Development, SQE incident investigation & root cause analysis and processes.
• Active participation and collaborating to provide SQE / technical advise as required to the Lab Team, Customer Service, Operations, Engineering, Rapid Recovery and wider A-Gas Group & other relevant stakeholders.

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description:

• Manage and maintain security protocols, IT systems, networking infrastructures and database systems.
• Troubleshoot technology issues.
• Manage multiple projects simultaneously.
• Work with inter-disciplinary teams to craft IT solutions.
• Communicate complex information to a non-technological audience.
• Assist in researching, designing and implementing new programs.
• Identify and solve problems in existing hardware and software solutions.
• Develop, modify and maintain database.

Job Requirements:

• Diploma or Bachelor's degree in computer science or related field.
• Minimum 4 years of relevant working experience in the technology space.
• Knowledge on relevant IT standards and practices.
• Knowledge of Information Technology strategy development, including network.
• Experience in SAP software and implementation will be an added advantage.

We regret that only shortlisted candidates will be notified.

Interested applicants kindly click on “apply now” or send your updated resume to [email protected]

Jayden Kua Jing Yu
Registration Number: R24124814
EA License Number: 02C4944
People Profilers Pte Ltd, 20 Cecil St, #08-09, PLUS Building, Singapore 049705
http://www.peopleprofilers.com

• Understanding project specifications and developing time schedules and budgets that meet them.
• Prepare histograms, tables, S-curves, resources logs
• Develop construction, baseline programmes
• Monitoring and tracking project progress, and writing up reports.
• Attending and scheduling meetings as required.
• Understanding and meeting all contract requirements.
• Communicating with managers, supervisors, and the rest of the team.
• Analyzing technical drawings and providing material and cost estimates.
• Ensuring all projects are completed on time and within budgets.

Your responsibilities include technical administration, maintenance and troubleshooting.

Monitor condition of server, apps and security measures

Identify, log and resolve technical problems of the scope (Incident Management)

Ensure that work is carried out within agreed service levels (Service Request / Incident / Change / Patch Management)

Respond to site to troubleshoot, diagnose and rectify faults

Liaise and coordinate the recovery of systems

Identify potential changes and system improvements for consideration and implementation (continuous improvements)

Create, maintain and distribute reports of progress to service delivery manager.

Any other ad-hoc tasks assigned

Good knowledge of Vmware and Nutanix

Good knowledge of windows operating systems, Clusters, NLB, or Unix

Good knowledge of Solarwinds, Qradar

At least 3 years of relevant working experience in infrastructure support is required for this position

For interested applicants, do apply directly ysing this link - https://beex.breezy.hr/p/bf1236d1a519-electrical-engineer

Your Role

Your role is Electrical Engineer. Your daily schedule will include frequent interactions with Mechanical and Software on Product Development and production design work, directly reporting to the Electrical Lead.

Your Job Scope

• Design and Implement sub-components of our Hovering Autonomous Underwater Vehicle.
• PCB Design of Electronics boards for interfacing, operation and control of our vehicles.
• Power electronics design to various system components, sensors and actuator systems.
• Wire harness and cabling design and production drawing generation(2D and 3D).
• Firmware development on microcontrollers such as Atmega and ARM for real-time control of hardware components.
• Bench-testing and field testing of key sensors and components for integration to our vehicles.
• Carry out intensive bench and in-water testing of our vehicles, and document performance.
• Stress testing of system components for harsh environment operations such as thermal, vibration, EMI-EMC and humidity.
• Gather user requirements in collaboration with management team and end customers.

Desired Qualities

• Bachelor's Degree in Electronics, Electrical Engineering or equivalent
• 3-6 years of experience designing and implementing Electrical Architecture of robotic systems.
• Experience with battery operated designs, embedded systems, microcontrollers, sensor and actuator interfacing.
• Experience with low voltage power electronics design for battery operated systems (power regulation, boost/buck conversion, power protection, load balancing etc).
• Experience with Altium designer and other equivalent PCB CAD software.
• Experience with any 2D schematic, wire harnessing and cable assembly design software.
• Experience with C++ for embedded systems programming and development.
• Knowledge of python is a plus for high level interfacing and algorithms development.
• Experience with git and version control systems.
• Experience with quality control and test procedures for tests such as in EMI-EMC, Vibration, temperature, humidity testing is a plus.

Remuneration Package

• Market competitive salary
• Growth opportunities that align with your direct ability in helping the company, rather than an arbitary corporate ladder
• ESOP / equity participation
• Support for skills upgrading / learning credits
• Healthcare support
• Special access to industry events
• Well-stocked pantry with nice snacks

Prior to your interview, please prepare:

• Testimonial of 1 other engineer who has worked with you
• PCB Design from a previous project

Manage the transmission of the documents and drawings for the client and subcontractor to ensure the updated drawings are issued

Prepare method of statement and work procedure

Conduct weekly and monthly meeting with sub-contractors adto update dprogress dwork

Ensure the quality of work is achieved and all government and safety regulations are complied

Oversee drawing management and control of technical documentation

Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly used

Assist the Project Manager and Senior Project Engineer in coordination with consultants on charge order issued and liaise closely with Quantity Surveyor by providing necessary suporting documents on the charge order

Organise labour, equipment and materials for day to day site activities

Carry out material receiving & maintaining material records

Prepare daily & monthly progress report, platform and maintain inspection record

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Job Description:

• Responsible for product quality assurance.
• Completes all administrative activities associated with quality inspection.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Downloads quality information from quality system to be used for Quality reports.
• Plans and directs activities concerned with the establishment and/or continuance of process related requirements and other quality programs.
• Prepares quality documentation or equivalent.
• Prepares Statistical Process Control Charts where required.
• Responsible for authorizing the released of final products to customer.
• Supervises inspectors or technicians on the inspection plan.
• Directs inspectors or technicians engaged in measuring, inspecting and/or testing products or parts and tabulating data.
• concerning materials, product or process quality and reliability.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering
• to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets
• through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Job Requirements :

• Diploma / ITC / NTC in Mechatronics/ Electrical & Electronics engineering or related discipline, preferably with 2 years in manufacturing environment.
• Proficiency in written and communication skills in English.
• Practical computer skills and knowledge with hands-on ability.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Able to use microscope for inspection and verification.

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform technical assistance for different components and systems in power management and backup solutions.
• Liaise with end-users for on-site installation, commission, repair and maintenance.
• Ensure on-site work are carried out in safe manner and comply to safety measures.
• Monitor on maintenance contract to ensure work is carried out timely.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of experience in offering technical support in the UPS/DC Power sector.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Resolve equipment faults at customers' premises and ensure timely resolution.
• Coordinate with customers and sub-contractors to manage add-on project activities.
• Track work progress closely to ensure adherence to schedules and quality standards.
• Guarantee timely delivery of materials and equipment for site installation or fault rectification, and conduct periodic maintenance for customers.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent,
• At least 2 years of experience in troubleshooting of card access systems, alarm systems, CCTV etc.
• Possess valid class 3 driving license.
• Comfortable with stand-by duty.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Support the planning, implementation and upgrade of the cybersecurity products and solutions.
• Train external and internal clients on how to use the company products and solutions.

Requirements:

• Diploma in IT/Cyber Security Engineering or equivalent
• At least 2 years of CyberArk experience in IT, IS or Cybersecurity industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Develop test programs for Digital, PMIC, RF & Mixed Signal products on automated test equipment.
• Liaise closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities.
• Troubleshoot digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature).

Requirements:

• Diploma in Electronics/Electrical/Communication Engineering or equivalent.
• At least 3 years of developing SOC programs from NPI to volume ramp stage experience with Advantest V93k or Teradyne Uflex/Iflex.
• Proficient in Java, C/C++, Visual Basic, Perl, Python

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

☑ Basic $ 5500 - $ 6500

☑ MNC - High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm)

☑ Multiple Location : Central or East Area

Job Description

• Develop and manage project schedules for building works, M&E, and Process Systems, from initial design through construction, installation, and final testing.
• Estimate the time and resources required for major construction activities.
• Prepare technical documentation for tender submissions.
• Participate in site planning, track work schedules, and monitor on-site progress.

Job Requirements:

• Diploma/Degree in Civil Engineering or related
• Min 3 years of experience in construction scheduling & building-related facilities.
• Proficiency in MS Project Planner, Primavera, or Synchro.

Interested applicants are welcome to apply or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job ID: 19206

• Location: Mattar
• Working hours: 8.30am – 5.30pm
• Salary: up to $4,500 (Depending on experiences), Car allowances will be provided

Job Description

• Manage and oversee the entire sales cycle, including customer meetings, quotation submission, sales order processing, and delivery follow-up.
• Provide advanced technical solutions and support to customers.
• Prospect and develop new accounts while maintaining and expanding relationships with existing accounts.
• Develop and implement strategies to achieve the company’s overall sales and marketing objectives.
• Mentor and guide junior sales engineers, providing training and/or support as needed.
• Collaborate with cross-functional teams to ensure customer satisfaction and address any technical or logistical challenges.
• Analyze market trends and customer feedback to identify opportunities for product and service improvements.

Job Requirement

• Diploma or Degree in Mechanical, Mechatronics, Electrical, Electronics, or a related field.
• Possess own car
• Minimum of 5-7 years of sales experience, with a proven track record in a technical sales role
• Strong leadership qualities and experience in mentoring or leading a sales team.
• Aggressive, result-oriented, and self-motivated.
• Excellent interpersonal, presentation, and communication skills.
• Ability to work independently as well as part of a team.
• Ability to understand and communicate complex technical solutions.
• Proven ability to meet and exceed sales targets and goals.
• Strong problem-solving skills and the ability to handle challenging customer situations.
• Experience in a senior sales or sales engineering role within factory automation and/or semiconductor will be advantage.

Interested applicants, kindly send your updated resume to Joanne (R21101135) [email protected] with the email subject header "Job Application for 19206, Senior Sales Engineer".

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Pasona Singapore Pte Ltd

Joanne Yeo Min Qian
EA License No:90C4069

Registration No.: R21101135

• SGD 4,000 – SGD 8,000 + Variable bonuses
• Consultancy handles projects in government agencies, industrial, commercial & residential granting a competitive advantage
• Excellent career progression + Equal opportunities for advancement
• Attractive employee welfare benefit
• Location: Bugis area | Mon – Fri

Responsibilities

• Undertake design development and detailed designs.
• Attend site/ project meetings with clients, consultants and contractors.
• Familiar with engineering software and the latest code of practice.
• Senior hire would require to plan, coordinate, manages and supervises the civil & structural project.

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Working experience in a Civil & Structural consultancy firm.

Applicants are encouraged to include the following in their resume:

1. Expected salary
2. Notice period
3. Past project details – what kind of construction/building, etc

We regret to inform that only shortlisted candidate will be contacted.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898