Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma in Civil Structural Engineering or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Focus:

The spirit of this role is about the hunger, passion and drive to succeed in advertising client servicing. It requires enthusiasm, dedication, a proactive and inquisitive manner, resilience, attention to detail, reliability, a willingness to learn and an openness to get involved in all aspects of account management support. The accounts are fast paced and the workflow is a constant stream of creative development, animatic production, stakeholder management & TV and digital production. Succeeding can offer you great career opportunities Account Management.

Key Responsibilities:

· Supporting the Account Director in preparing materials for meetings – scripts, Client presentations, creative references, and status reports.

· Working on the production of animatics / digital assets / TVCs, liaising with the Creatives, Planners and TV producers.

· To be responsible for producing Cost Estimates for approval with Client and managing with Finance.

· Managing the team priorities and diaries to help manage projects and meetings with the Clients.

· Ensuring that there is a clear communication of what is happening amongst the Agency team.

Skills & Experience:

· Internship Experience in an advertising agency is preferred.

· Exceptional communication skills (both written and verbal) in English.

· Experience working directly with clients on the phone / email / face to face meetings.

· Ability to work collaboratively with a multi-disciplinary team.

· Ability and confidence to form good relationships with both internal and external (3rd party suppliers) departments.

· Be confident to run the day-to-day finance of each project assigned.

· Experience in solely running small projects from start of brief to final delivery – e.g. Key Visuals / Animatic (with line manager overseeing).

· Analytical skills in understanding matter at hand, especially in order to run the smoothness of projects with key functions.

· Experience handling multiple projects at one time and keeping calm under pressure / seeking out solutions.

· Good attention to detail, accuracy and organized, able to multi-task / prioritize actions on a daily basis.

· Strong knowledge of Excel, PowerPoint and other Office tools. Basic editing, subtitling/relevant program skills a plus.

· Self –motivated, strong desire to learn.

· Passion for building brands and particular interest in digital communication.

· Flexible with working hours – including some occasional late nights.

· Team player who likes to work in a fun, highly motivated team, and keen to participate in social events.

MarineTech Data Collection & Analysis

• Collect and analyse data from various sources, including market research, customer surveys, sales reports, and digital analytics.
• Identify trends, patterns, and insights to support clients' decision-making.

Market Research

• Conduct market research to understand industry trends, competitive landscape, and customer preferences.
• Design and execute surveys, focus groups, and other research methods to gather relevant data.

Reporting & Visualisation

• Prepare and present detailed reports on performance, trends, and insights.
• Use data visualisation tools to create clear and compelling charts, graphs, and dashboards.

Tool Proficiency

• Utilize data analytics tools and data analysis software effectively.
• Stay current with emerging analytics tools and technologies.

Qualifications

• Master's degree in Marketing, Business Analytics, or a related field.
• Experience as data analyst.
• Knowledge of statistical analysis and modeling techniques.
• Strong analytical skills with the ability to interpret complex data and generate actionable insights.
• Proficiency in data analysis tools and software.
• Experience with digital marketing analytics and tools.
• Excellent communication skills, with the ability to present findings clearly and persuasively.
• Detail-oriented with strong organisational and time-management skills.
• Ability to work independently and as part of a team in a fast-paced environment.

Your jobscope surrounds but not limited to:

• Handle partial/full set accounts
• Periodic reconciliation and updating of bank statement
• Preparation of monthly financial reports and schedules
• Processing of export and import documentation and payment after validation of various requirements as per work process in place

SEJ is one of the largest food solutions providers in Singapore, and we are currently looking for an HR Executive seeking a long-term career in HR.

Job Description

• Manage and maintain our HRIS system, including data entry, report generation, and system updates.
• Provide comprehensive HR support to employees, including onboarding, offboarding, benefits administration, and performance management.
• Assist in various HR projects, such as talent acquisition, employee engagement initiatives, and policy development.
• Ensure compliance with local labor laws and regulations.

Job Requirements:

• Bachelor's degree in Human Resources, Business Administration, or a related field.
• Converse in Chinese with Chinese-speaking stakeholders
• Able to work as a team player and contribute solely at times
• Show initiative and willingness to learn
• Able to think critically and show sound judgment on the unexpected.
• Able to work 5.5 days

There is never a dull day at SEJ. Join us if you seek challenges and job stability at the same time.

1) Performs administrative and clerical tasks

2) Ensuring internal Records are accurate

3) Checking of documents from customers to ensure compliance

4) Assists with initial client operational requirements relating to vehicle recovery / towing

5) Assists with internal reporting generation and submission to relevant stakeholders

6) Any other duties as assigned by management

7) Training will be provided

Fresh graduates are welcome to apply

Responsibilities:

• Assist in daily sales activities, logistics, trade, and plant operations.
• Ensure smooth delivery of shipment by working closely with freight forwarders and overseas suppliers.
• Manage logistics operations and outbound shipment planning for products and destinations.
• Liaise with shipping agents.
• Maintain and update inventory records and costing.
• Other ad hoc job duties assigned.

Requirements:

• Good working attitude, meticulous & independent.
• The workplace is located in Tuas, and company transport is provided from Jurong East MRT.
• Candidate must possess at least O Level/Diploma/Advanced/Higher/Graduate Diploma.
• At least 1 Year(s) of working experience in the related field is required for this position.
• Preferably, the entry-level should specialize in logistics/supply chain or equivalent.

RESPONSIBILITIES

> Perform data entry and provide administrative support for project operations.

> Assist in Plan purchases and NCEs submissions.

> Provide documentation and contract mangement for work requests.

> Monitor, communicate and coordinate with internal project teams and departments and external parties on job

statauses and project matters.

>Perform other duties or tasks as assigned by immediate superior or Head of Department.

OTHER INFORMATION

> Detail oriented and be able to work efficiently in a fast-paced and dynamic environment.

> Good multi-tasking, documentation and interpersonal skills.

> Possess a good mindset and attitude with a strong drive to learn.

> Able to work independently and is also a team player.

QUALIFICATIONS

> At least a Diploma in Business Administration or equivalent.

> 1 year of relevant experience and preferably from Construction Industry.

> Proficient in Microsoft office Suite (Word, excel and power point).

> Knowledge In SAP program is preferred

Interested applicants please send your resume to

[email protected]

We regret only shortlisted candidates will be notified.

We are seeking a Finance Executive for our Singapore Office to support the Finance & Accounting Team. Candidate should have a minimum of 2-3 years of accounting experience.

Responsibilities:

• Able to handle all aspects relating to the accounting functions to facilitate the closing of the full set of accounts (eg: GL, AP, AR, Bank Reconciliation, Payroll & etc)
• Request and monitor Payments of branches and summarize and report.
• Review contracts & agreements, and follow up with other counterparts.
• Generating integrated reports under the Finance Operation team
• Support the financial planning and cashflow forecasting processes
• Verify that transactions comply with financial policies and procedures.
• Handling any other ad-hoc duties or operational issues requiring finance involvement
• Communicate with IT team to improve the logistics monitoring system
• Update and test system about index and feedback results to the IT team

Job Requirements:

• Degree in Accounting/Finance/ACCA.
• Minimum 2-3 years of accounting experience
• Possess a willing-to-learn attitude
• Team player with good communication skills.
• Demonstrated ability to prioritize and organize workloads for maximum effectiveness.
• Able to work in a fast-paced working environment.
• Proficient in MS Office and Excel.
• Proficient in Microsoft 365 will be advantageous
• Preferable if able to commence work immediately

Remuneration:

• Basic Salary: starting from $2,800 depending on career
• Performance Incentive: $300 monthly depends on performance appraisal & good attendance
• $10 meal allowance for overtime exceeding 2hrs
• 12 days Annual Leave per year
• Standard Sick Leave & Hospitalization & Child Care leave, Marriage leave, Paternity Leave, Maternity Leave
• Quarterly performance reviews with salary adjustments

Working Hours: 5 days

• Mon to Thu – 8 am to 6 pm, Fri – 9 am to 6 pm
• Off Day - Saturday, Sunday & Public Holiday

Please submit your updated resume through the Apply Now link.

Main scope: -

• Handle general clients’ enquiries, quotations, order processing, and fulfillment
• Accounts Payable ( Invoices and Payments )
• Updating of suppliers/ vendors list
• In-charge in office administration work for Finance / Operation / HR department
• Workers injured insurance claim
• Follow up on company vehicles for inspection/Road Tax/Vehicle Insurance
• Handle in maintaining of workers timesheets to process and manage monthly payroll
• Documents controlling and filing
• Perform any ad hoc assignments as and when required

Secondary scope: -

• Sort and process staff claims
• Perform any ad hoc assignments as and when required

Key Responsibilities:

1. Manage and maintain the company brand image across various platforms.
2. Develop marketing plans and assist with department-level strategies.
3. Coordinate with outsourced media agencies, provide creative input, and follow up on project timelines.
4. Collaborate closely with the management, organizing and implementing strategic ideas provided by the executive team.
5. Monitor market trends, gather competitive insights, and contribute to improving brand presence.
6. Support planning and execution of promotional events and campaigns.

Requirements:

1. At least 2 years of relevant experience in marketing or brand management.
2. Strong organizational and project management skills to coordinate between teams and external partners.
3. Ability to gather and structure ideas effectively, turning concepts into actionable plans.
4. Experience liaising with external media or marketing agencies is a plus.
5. High level of creativity and ability to provide fresh ideas and inputs.
6. Strong communication skills, both verbal and written, with proficiency in Mandarin to facilitate communication with colleagues and partners.

This role offers significant career advancement opportunities, with a focus on personal development and direct collaboration with company leadership.

RESPONSIBILITIES

● Handle Pre-Qualification requests / enquiries / tenders and submit quality response / bid proposals on time to Customers

● Organise and coordinate Tender Process between various departments

● Set up Bill of Materials, drafting & compiling tender packages per tender specifications and requirements.

● Compile Tender Clarifications (commercial & technical) for submission to clients

● Prepare Costing Sheets for equipment and services

● Present Financial Sheets for management’s approval on price strategies

● Perform contract review of awarded contracts to ensure no discrepancies compared to submitted proposal.

● Arrange for the handover of the awarded contracts to the Project Department

● Prepare and process shipping documents for project shipments

● Provide clerical and administrative support to Commercial Department.

● Ensure good housekeeping with efficient filing system.

● Develop and maintain good working relationships with various internal departments, vendors, plant and external sales in support to the obtaining cost and market information.

● Having a balance to win orders and yet making sure that company profitability / interest is In-line and compliance with directions and policies from management and company.

● Any other ad-hoc duties as assigned.

PRE-REQUISITES

● Degree/Diploma in a technical discipline.

● Familiar with the tendering process for Oil & Gas industry

● Equipped with 3 - 4 years prior experience, Surface Wellhead and Xmas Tree experience is preferred

● Able to read and decipher technical drawings will be advantageous

● Proficient in Microsoft Office (Word, Excel, PowerPoint)

● Detailed and meticulous

● Good team player while able to work independently

Job Brief:

We are looking for a competitive and trustworthy Sales Executive (Projects) to help us build up our business activities.

Job Purpose:

Working as part of a dynamic and vibrant team; the incumbent works towards achieving personal and group sales for the company. The job is based on setting up a strategy and executing vis-à-vis servicing of existing accounts; finding new prospects and sales leads and converting them into recurring customer.

Sales Executive responsibilities include discovering and pursuing new sales prospects, negotiating deals and maintaining customer satisfaction. If you have excellent communication skills and feel comfortable reaching out to potential customers to demonstrate our services and products through email and phone, we’d like to meet you.

Main Areas of Responsibility:

• Exploration of new customer base & key account management
• Accountable for monthly and yearly sales forecast
• Conducting market research to identify selling possibilities and evaluate customer needs
• Actively seeking out new sales opportunities through cold calling, networking and social media.
• Setting up meetings with potential clients and listening to their wishes and concerns
• Site survey and works coordination
• Provide quotation and engagement with customer up to sales award
• Aptitude in delivering attractive presentations
• Project coordination [as when required]
• Selling Product/Services principally; 1) Relocation 2) Packing/Crating 3) 3PL – Warehouse & Transportation 4) Machine/Equipment Installation
• Adhoc tasks as and when required

Requirements and skills

• Proven experience as a Sales Executive or relevant role
• Proficiency in English
• Excellent knowledge of MS Office – EXCEL, POWERPOINT
• Hands-on experience with CRM software is a plus
• Thorough understanding of marketing and negotiating techniques
• Fast learner and passion for sales
• Self-motivated with a results-driven approach
• Previous experience in freight forwarding; logistics background/training is advantageous.
• Class 3 License

* Do note that our HQ is currently located at 6 Tuas Ave 20, Singapore 638820*

JOB SCOPE:

Coordinate and manage all activities associated with sales. Responsible for overall sales and achieving sales budget. Develop new accounts and key account management.

JOB RESPONSIBILITIES:

• Responsible for revenue generation.
• Executive business plan.
• Formulate and review product pricing.
• Coordinate evaluations and trials.
• Manage and support key accounts.
• To review and report, where applicable, on performance to General Manager-Sales.
• Any other duties as assigned by General Manager-Sales.

JOB REQUIREMENTS:

• Diploma in Engineering or business-related fields.
• At least 2 years of Industrials Sales and Marketing experience.
• Proven ability of develop business opportunities and achieve success in account growth and revenue generation. Proficient in handling technical and service issues.
• Possess own vehicle.

Responsibilities:-

• Carry out in-yard / out-yard, stuffing / un-stuffing and loading / unloading operations
• Perform lifting operations
• Assist in forklift, chassis and heavy vehicles maintenance
• Daily maintenance and housekeeping of working area
• Able to carry out tasks proficiently and safely
• Ability to anticipate job activities, prepare tools and equipment
• To maintain high standard of productivity and safety through proper work attitude
• To maintain personal health so as to meet the physical demand on site.
• Other ad hoc operations duties.

Requirement:-

• Minimum "N" Level / ITE Certificate or equivalent
• Possess forklift license, rigger/signalman cert, lifting supervisor cert, WAH cert will be an advantage (those without will be sent for training)
• Possess some computer knowledge to input data into Warehousing Management System
• Those without experience but willing to learn with positive attitude are welcome to apply.
• Able to start work with short notice

Responsibilities

• Schedule job, set priorities, monitor job progress and tracking schedules, communicate changes on job status.
• Responsible for daily drivers’ and equipment planning and deployment
• Coordinate and interface with internal and external customers to ensure on time deliveries and collections
• Liaise with all departments / customers for all job execution
• Handle customers’ complaints, drivers’ feedback and problems.
• Ensure that all records in the Control Department are updated accurately.
• Any other tasks as assigned

Requirements:

• Ability to respond to ad-hoc and urgent demand on timely and professionally
• Ability to multitask and work under a fast pace environment
• Computer literate, independent with good interpersonal skills
• Good communication skills and must be Bilingual.

Responsibilities:-

• Deliver / collect cargoes via lorry as per job assigned.
• Ensure documents and cargo dimensions tally as per job order.
• Carry out cargo / road survey and ensure information is feedback to office without delay.
• Perform documentation clearance duty during police escort.
• Perform port / custom clearance duties for import / export shipment.
• Assist in field operations e.g. lifting operations, loading / unloading, stuffing/unstuffing, cargo lashing / choking.
• Other ad hoc duties as assign

Requirement:-

• Minimum "N" Level / ITE Certificate or equivalent
• Possess class 3 driving license
• Possess forklift license, rigger/signalman cert, lifting supervisor cert, WAH cert will be an advantage
• Able to start work with short notice