Job Description & Requirements

Position Overview: The Quality Control Specialist for the central kitchen plays a pivotal role in ensuring the production of high-quality food products that meet established standards and exceed customer expectations. This position is responsible for monitoring and maintaining quality assurance processes, conducting inspections, and supporting continuous improvement efforts within the central kitchen.

Key Responsibilities:

1. Product Inspection: Conduct thorough inspections of all food products at various stages of production, from raw ingredients to finished dishes, to ensure they meet quality and safety standards.

2. Quality Assurance: Develop and implement quality control procedures and guidelines, ensuring compliance with industry regulations and company standards.

3. Sampling and Testing: Collect samples for laboratory analysis or sensory evaluations, such as taste tests, to identify any deviations from the set quality benchmarks.

4. Documentation: Maintain detailed records of inspections, test results, and other quality-related data. Generate reports and share findings with relevant departments.

5. Problem Identification: Identify and report any issues, defects, or deviations from quality standards. Collaborate with production teams to address and rectify issues promptly.

6. Process Improvement: Provide input and suggestions for process improvement, and participate in cross-functional teams to drive continuous improvement initiatives.

7. Training and Education: Conduct training sessions for kitchen staff on quality control procedures and best practices, ensuring all team members are aligned with quality standards.

8. Food Safety Compliance: Ensure adherence to food safety regulations and standards, including HACCP, by overseeing and validating sanitation and hygiene practices within the kitchen.

9. Supplier Collaboration: Collaborate with procurement and supplier teams to monitor the quality of incoming ingredients and packaging materials, and implement corrective actions when necessary.

10. Equipment Maintenance: Participate in the maintenance and calibration of quality control equipment and tools used in inspections and testing.

Qualifications and Requirements:

· Proven experience in food quality control or quality assurance, ideally in a central kitchen or food production setting.

· Strong understanding of food safety regulations, including HACCP principles.

· Excellent attention to detail and analytical skills.

· Effective communication and teamwork abilities.

· Proficiency in using quality control tools, such as laboratory equipment and data analysis software.

· Problem-solving skills and the ability to drive process improvement.

· Knowledge of food production processes and ingredient characteristics.

· Willingness to work in a dynamic, fast-paced environment.

·Able to work on PH ,Night shif and Weekend

The Quality Control Specialist for the central kitchen is an essential contributor to ensuring the safety and satisfaction of customers by maintaining consistently high-quality food products. This role demands a keen eye for detail, a commitment to compliance, and a dedication to continuous improvement in food production processes.

EA LICENSE : 18C9520

EA REG: R1765753

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

Responsibilities

• Checks of incoming/ outgoing components parts
• Identify solutions for production issues
• Maintain documentation of data using computer system
• Maintain quality control
• Perform quality control testing on production/finished parts in accordance with Good Manufacturing Practices (GMP) and company procedures
• Visual inspection of parts cosmetic requirements

Requirements

• Able to read technical drawings
• Use of basic measuring equipment (vernier calliper, micrometre, height gauge, CMM)
• Able to handle bulky parts

Working Hours: Monday to Friday, 8.30am to 6.00pm

Working Location: Tuas Link 1 (Nearest MRT Station: Tuas West Road)

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Job Description:

We are seeking a dedicated and experienced Quality Controller to join our team. The ideal candidate will be responsible for ensuring that all products meet the required standards of quality and safety before reaching the customer.

Key Responsibilities:

• Inspect products and materials for quality assurance purposes.
• Ensure compliance with industry standards, regulations, and company policies.
• Conduct tests and assessments to evaluate product quality.
• Report and document any deviations or defects and suggest corrective actions.
• Collaborate with production teams to maintain consistent quality control procedures.
• Assist in implementing and improving quality control systems.

Requirements:

• Proven experience as a Quality Controller or similar role in [industry related to your company].
• Strong knowledge of quality control standards and methodologies.
• Ability to use measuring instruments and test equipment effectively.
• Excellent attention to detail and analytical skills.
• Good communication skills and the ability to work in a team environment.
• [Any additional qualifications, e.g., certifications, technical skills, etc.]

Preferred Qualifications:

• [Mention any specific preferred qualifications if applicable.]

How to Apply:Interested candidates are invited to submit their resume and cover letter via MyCareersFuture or email to [email address]. We look forward to hearing from you!

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description

Role: Quality Engineer (QE)

Position Overview:

The Quality Engineer is responsible for ensuring the quality of construction materials, processes, and workmanship throughout a project. This role involves developing QA/QC documents, monitoring site quality control activities, monitoring compliance with standards, and implementing quality assurance procedures to deliver projects that meet contract, client specifications, international standards, and Singapore regulatory requirements. This role is essential to delivering high-quality, durable, and safe civil engineering projects while maintaining efficiency and minimizing risks.

Key Responsibilities:

1. Take part in developing QA procedures as required by the project Quality Assurance Plan.

2. Develop and/or review QC report templates and checklists as per ITPs.

3. Participate in developing quality training materials per project quality requirements and technical specifications. Conduct quality training for subcontractors’ QC inspectors and site supervisors.

4. Conduct regular checks for site QC activities and QC report completion.

5. Cover day-time site inspections for civil works as per ITPs when it is needed by site situations.

6. Take part in project internal quality audits in accordance with project audit procedures to ensure compliance with company ISO 9001 QMS, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

7. Take part in project external quality audits to subcontractors in accordance with project audit procedures to ensure compliance with subcontract, project specifications, codes, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

8. Regularly monitor project KPIs, and ensure out-of-target KPIs are identified and raised to applicable subcontractors for root cause analysis, in the meantime, report to the QAQC manager.

9. Coordinate with discipline engineers, subcontractors, the client, and third-party inspectors to ensure project quality requirements are met.

10. Take part in preparing mechanical completion documents before commissioning.

11. Prepare the Turnover Package (TOP) at the project ending stage.

Work Environment:

Ø Combination of office and on-site work.

Ø Working overtime may be required, and working at a fast pace.

Requirements for the role:

Ø Degree or Advanced Diploma in Civil Engineering or related engineering field.

Ø At least 6 years of relevant Experience in quality assurance (QA) and QA document development in Singapore for civil engineering projects.

Ø Experience in site quality control (QC) related inspection and tests.

Ø Strong knowledge of construction materials, techniques, and standards (BS EN, SS, ASTM).

Ø Excellent quality problem-solving and analytical skills.

Ø Strong communication and interpersonal skills.

Ø Experience in the CONQUAS process.

Ø Certification in Quality Management (e.g., ISO 9001) is a plus.

Candidates are required to:

• Supervise, monitor, document and enforce factory workers’ hygiene and critical control points of production
• Assist in factory audits
• Handle any employee misconduct or issues relating to food safety and hygiene
• Maintain records and food safety standards
• Handle administrative tasks such as placing orders for factory supplies related to Quality Control and sending samples for lab tests
• Liaise with suppliers and customers relating to quality matters and documentation
• Conduct training for workers

Working hours: 8am - 6pm (Monday - Friday)

Candidates should possess the following skills/knowledge:

• Basic knowledge of food hygiene
• Relevant education in Food Science
• Competent knowledge in Word, Powerpoint and Excel
• Good understanding of GMP, HACCP and ISO22000

Knowledge in FSSC 22000/working in an FSSC 22000 environment is an advantage.

Main duties and responsibilities :

1. Incoming QA(IQA) and Outgoing QA (OQA) Inspection
2. Quality Wall (QW) buy off
3. Weekly process audit
4. Non Conformance Material Report (NCMR)

Experience and knowledge :

1. Min "O” level with 3 years of related experiences in a manufacturing environment.
2. Knowledge of Microsoft (words, excel and ppt) is a must.
3. Knowledge of Stamping, Plating, Molding and Connector Assembly is an added essential.

Skill Required :

1. Good knowledge on measurement methodology and equipment (profile projector, TM scope, OGP smart scope).
2. Exposure in Process and QMS Audit.
3. Knowledge of Quality tools such as SPC and 7 QC tools.
4. Good interpretation of product drawing, specification and Inspection Plan.

Job Requirement :

1. Able to work independently
2. Able to work rotation shift

PRINCIPAL ACCOUNTABILITIES

SQP oversees critical and non critical supplier mainly mechanical parts in. SQP is responsible in leading before and after FAS (First Article Submission) qualify and monitor quality performance of new / existing suppliers and ensure uninterrupted supplies of materials and services. He/ She should be able to foster close relationships with suppliers and partners and be able to communicate their value to the company.

JOB RESPONSIBILITIES

1. Lead and Drive First Article Submission for new and existing supplier

Supplier Quality Professional develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier. Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI. SQP shall work with Sourcing and Engineering, to engage and educate suppliers/sub-contractors.

2. Lead quality performance review

Worked closely with suppliers, to monitor conduct audit for vendor performance. Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers. Guide Procurement and team for supplier performance review process.

3. Supplier Development.

SQP shall drive for vendor development, identify and develop new special process to meet turnkey objective and reduce leadtime of supplier.

4. Analyse supply market.

SQP shall propose and execute creative ways to improve supplier process which creates financial value to the organization.

5. Maintain good relationship with stake holders and customer/s

SQP maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality. Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.

6. Develop Product Quality Control Plan

SQP shall also be in charge in developing Quality Control Plan according to the requirements of the customer. He/She shall ensure that required processes and documentations and surveillance points are identified in the QCP. He/She shall liase closely with the customer during development of the new QCP and revision of the existing QCP and its approval (internal and Customer).

7. Customer /Third Party Inspection coordinator

SQP shall manage Customer and Third Party inspection of products/parts. He/She shall ensure that each Quality Control Plan activity which requires surveillance points are monitored and conducted accordingly. He/She will liase and communicate closely with the internal and external customers to ensure that TPI inspections are executed according to the plan schedule.

8. Perform any ad-hoc duties as and when assigned by the superior.

9. All employee of Completion Products Pte Ltd shall observe the highest standards of ethics and integrity in undertaking purchasing activity and act in a honest and professional manner that supports the standing of Completion Products Pte Lts core value.

10. Ensures 5S is implemented in the work area.

11. Adheres company’s guidelines with regards to Safety and Quality.

12. Complies to Company Code of Business Conduct.

13. Support and participate in company-wide or departmental programs such as:

· Total Quality Management, Lean Manufacturing

· Social Activities

REQUIRED COMPETENCIES

1. Must complete minimum training required specified in Employee Qualification and OJT Form No. S 1-026F.

2. Ensures Accountability – holding self and others accountable to meet commitments

3. Decision Quality – making good and timely decisions that keep the organization moving forward. Good decisions that are a mixture of analysis, wisdom, experience and judgement.

4. Customer focus – Building strong customer relationships and delivering customer-centric solutions.

5. Drives Result – consistently achieving results, even under tough circumstances. Results might be quantifiable – measured in terms in P&L, sales growth, customer satisfaction ratings, new product launched. Qualitative result -- an enhanced reputation among customers, a more vibrant brand that attracts customer and employee talent.

QUALIFICATION GUIDE

1. Education : Minimum Degree in Technical/Engineering course preferably Mechanical

Engineering

2. Communication : Fluent both in oral and wriiten English communication

3. Experience : Minimum 5 years of working on the same field . Experience in Oil and Gas

manufacturing is an advantage.

4. Experienced as Internal Auditor or Supplier Auditor is an advantage

5. With API or ISO Certification is preferred

Job Summary:

We are seeking a detail-oriented and experienced Quality Control (QC) Inspector/Officer to join our team. The ideal candidate will be responsible for ensuring that all products meet the company's quality standards through thorough inspections and testing. This role requires close collaboration with production, engineering, and warehouse teams to maintain compliance with internal policies and external regulations.

Key Responsibilities:

• Conduct inspections of raw materials, in-process products, and finished goods to ensure compliance with quality standards.
• Perform routine quality checks and maintain detailed records of inspections and test results.
• Identify and report any quality issues or non-conformities to the relevant departments.
• Implement corrective actions and preventive measures to address quality issues.
• Ensure that products comply with regulatory standards and customer requirements.
• Assist in maintaining and improving quality control processes and procedures.
• Collaborate with production teams to identify opportunities for improvement.
• Prepare and maintain QC documentation, including inspection reports, test certificates, and compliance records.

Requirements:

• Diploma or Degree in Quality Control, Manufacturing, or a related field.
• Previous experience in a QC role, preferably in a manufacturing or production environment.
• Familiarity with quality standards (e.g., ISO 9001, GMP).
• Strong attention to detail and excellent problem-solving skills.
• Good communication and teamwork skills.
• Basic computer skills (e.g., MS Office).
• Knowledge of safety regulations and best practices.

Preferred Qualifications:

• Experience with quality management systems (QMS).
• Certification in Six Sigma or other quality-related disciplines.
• Familiarity with industry-specific quality standards (e.g., HACCP for food, ISO 13485 for medical devices).

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At Leica Microsystems, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

Shape the Future with Us!

At Leica Microsystems, we have been shaping the future for over 175 years with groundbreaking optical and digital solutions. With a culture rooted in customer focus, innovation, and teamwork, we lead the market in microscopy, imaging, and analysis, unveiling the invisible and empowering our customers to build a better, healthier world.

Joining Leica Microsystems means contributing to scientific discoveries and supporting surgeons in making critical decisions. Our advanced microscopes and AI-based image analysis solutions enable users to gain profound insights into development and engineering challenges. Here, you will work on meaningful projects alongside passionate colleagues, driving progress and pushing the boundaries of what’s possible.

Learn about the Danaher Business System which makes everything possible.

The Senior Quality Engineer, PQE is responsible to ensure the quality of both medical and non-medical products through rigorous inspections, implementation of quality control measures, and identification of areas for improvement. You will address production quality issues, collaborate with cross-functional teams to find root causes, and drive continuous improvement to build high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering or quality assurance, attention to detail, a proactive mindset, and preferably experience in people management.

This position reports to the Senior Manager Quality Assurance and is part of the Production Quality Engineering (PQE) team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Address production quality issues by identifying problems and collaborating with cross-functional teams to develop solutions for overall product quality improvement.
• Utilize statistical tools to identify trends and patterns for enhancing the production process and ensuring quality.
• Investigate and correct root causes of product failures occurring in the field.
• Conduct periodic production audits to ensure compliance with established policies, procedures, and control plans.
• Participate in lean and continuous improvement initiatives, while adhering to company EHS requirements to prevent injuries and maintain safety.

The essential requirements of the job include:

• Bachelor's degree in Mechatronics, Mechanical Engineering, or Electronics.
• At least 5 years of relevant experience in biomedical or medical device manufacturing.
• Proficient in statistical control methods and QMS 9001; familiarity with ISO13485, USFDA QSR/cGMP, and ISO14971 for medical devices is advantageous.
• Computer literate in MS Office and Lotus Notes.
• Strong analytical, problem-solving skills, and knowledge of lean and investigation tools such as 8D and fishbone diagrams, with a solid understanding of engineering principles, theories, and concepts.

Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

• Carry out incident investigation, VDR analysis, on board audits / inspections and training as assigned.
• Assist the company with business development, where possible.
• Perform duties of Training Faculty when required.
• Visit and assess vessels for compliance with owners / managers requirements, industry regulations and best practices.
• Under the direction of the General Manager / Team Lead, ensure all assigned jobs are delivered in line with its expectations and ensure quality standards are uniformly maintained.
• Keep up to date with national, regional, and international legislative requirements and practices to support company compliance with all relevant regulations.
• Perform tasks as per the deliverables agreed with the client.
• Interface with vessel operators to ensure vessel performance standards.

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Quality Lab Support Coordinator

6 months contract

About the Company:
Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Responsibilities:

In this role, you will be responsible for all or subset of the key responsibilities below:

• Receive, archive, retrieve and dispose retention sample, following standard work, approved procedures and regulatory requirements in timely manner.
• Maintain proper 5S and ensure inspection readiness of retention sample rooms.
• Perform assigned tasks within stipulated timeline and escalate discrepancies to Reporting Manager.
• Support laboratory supplies stock check, receiving, stock arrangement and disposal as necessary.
• Any other duties as assigned by reporting manager.

Requirements:

• GCE O Level qualification and above
• Proficient with computer software such as Microsoft Word & Excel
• The role will require the person to be able to move heavy boxes up to 15 KG during process like transfer of samples/stocks checking.
• Customer focus with strong business acumen and continuous improvement mindset.
• Critical thinking mindset with a collaborative and problem-solving attitude.
• Good communication and interpersonal skills.
• Ability to work effectively in a team-based environment.

Reg No: R22104540

EA License no: 94C3609

Qualification: Degree in Engineering preferably Chemical or Mechanical or Diploma with min 5 years Quality experience.

Job Requirements: Minimum 5 years working experience in manufacturing environment preferably in Quality. Knowledge of ISO 9000, ISO 14001 and ISO/TS 16949 Computer Literate. Able to work independently and a team player.

Reporting Level: Quality Engineering Manager/ Artwork and OF Manager

Duties and Responsibilities:

1.1. To support the Quality Manager to meet the company objectives and goals.

1.2. Manage activities of incoming inspection to assure that materials used meet quality requirements

1.3. Oversee the product inspection activities within the company and QA activities within the department.

1.4. Overseeing outgoing inspections to ensure products meet customer requirements, including 100% firewall activities.

1.5. Developing, reviewing, and approving quality control methods and procedures to ensure that products meet customer specifications

1.6. Conduct training sessions for staff on quality standards, procedures, and best practices.

1.7. Manage and maintain quality documentation; and Prepare and review quality reports, metrics, and key performance indicators (KPIs)

1.8. Handling and managing customer complaints, coordinating with relevant departments for resolution, and ensuring timely responses to customers.

1.9. Prepare and manage corrective and preventive action reports (e.g., 8D reports) or relevant report(s) to customer.

1.10 Develop and initiate quality improvement programs, coordinating with internal departments and external parties (e.g., suppliers) to ensure successful implementation and measurable improvements.

1.11 Implement and uphold quality, environmental, and safety management systems such as ISO 9001,IATF 16949, ISO 14001, and applicable safety regulations. Represent management as Quality Management Representative (QMR) or Environmental Management Representative (EMR) in

these systems' implementation and maintenance.

1.12 Promote quality, environmental awareness.

1.13 Manage the activities of the Document Control Center.

1.14 Ensure that all measuring and test equipment are calibrated and in good condition as required.

1.15 Manage the handling of non-conforming products by stopping processes if necessary and ensuring that deficiencies are addressed and corrected before resuming production.

1.16. Assist the Quality Manager in strategic planning and decision-making and Provide input for setting quality objectives and goals.

1.17 Undertake additional tasks or responsibilities as directed by a superior.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a QC SME who will be responsible for ensuring the successful implementation and integration of gLIMS at the site by conducting thorough gap assessments and leading the required local process adjustments.

Key Responsibilities

• Perform gap assessments at the process and Standard Operating Procedure (SOP) levels.
• Collaborate with local teams, including MSAT and production, to identify necessary changes to existing processes, documentation, and data.
• Define, coordinate, and track actions to address identified gaps in a timely manner prior to roll-out.
• Develop and update local procedures for Quality and QC as required.
• Lead efforts to consolidate consumables, suppliers, instruments, etc., to reduce data load.
• Oversee data cleansing activities to ensure data integrity and accuracy.
• Manage updates and replacements of QC lab instruments (including firmware updates) to maintain secure system connections.
• Support the Change Manager by providing information, communication, and training to shop floor staff.

Required Qualifications

• Extensive experience in Quality Control and familiarity with gLIMS process descriptions.
• Strong analytical skills to identify local gaps and propose effective solutions.
• Excellent communication and collaboration skills to work with various stakeholders.
• Experience in writing and updating local work instructions and procedures.
• Empowered to make decisions for the site/department

Why join us?

• Generous Leave Policy including Elderly Care Leave to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Job Description

1. Respond to new and existing customers for inquiries.
2. Conduct quality testing and communicate product specification issues. Conduct nonconforming material or nonconforming product analysis.
3. Participate in the root cause analysis of nonconforming goods.
4. Follow the instructed corrective actions and preventive actions by superiors.
5. Secure customer formulations.
6. Control QSHE records and documents.
7. Establish formulation and blending procedures as needed.
8. Keep retain samples of products.
9. Validate COA of raw materials received and communicate any issues to the procurement and Plant Manager. Establish, update and issue GHS SDS.
10. Create certificate of analysis (COA) of products.
11. Coordinate sample delivery as required by the customer.

Job Requirements

• Minimum Diploma/Degree in Vhemistry related fields with at east 1 year related experience
• Fresh entry level graduates
• Technical Knowledge : Microsoft Office (Basic)
• Knowledge & Skills on QC Testing

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to join our team. The successful candidate will be responsible for ensuring the quality of low voltage switchboard panels to meet industry standards and client requirements. This role requires a strong understanding of electrical systems, testing procedures, and quality assurance.

Key Responsibilities:

• Conduct comprehensive testing of low voltage switchboard panels, including insulation resistance tests, contact resistance tests, high voltage tests and function tests.
• Perform inspections and audits of electromechanical assemblies to ensure compliance with applicable standards and specifications.
• Document test results and prepare detailed reports for internal and client review.
• Collaborate with design and manufacturing teams to identify and resolve any issues or discrepancies.
• Ensure all testing equipment is calibrated and maintained in good working condition.
• Participate in continuous improvement initiatives to enhance testing processes and procedures.
• Train production staff on quality control processes and provide guidance on quality-related matters.
• Stay updated with industry standards and advancements in testing methodologies.
• Ensure the quality of products meets the required standards and specifications.
• Support onsite testing, FAT, SAT and troubleshooting activities, if necessary.

Qualifications:

• Minimum Diploma in Electrical Engineering or a related field.
• Minimum of 2 years of experience in testing low voltage switchboard panels or similar electrical equipment.
• Strong knowledge of electrical testing procedures and standards (e.g., IEC 61439).
• Proficiency in using testing equipment and tools.
• Excellent analytical and problem-solving skills.
• Strong attention to detail and accuracy.
• Good communication and teamwork skills.
• Ability to work independently and manage multiple tasks effectively.

Preferred Qualifications:

Certification in electrical testing or quality control.

Responsibilities:

• Work within the Quality Group and the Package Team and liaise with all project team members, such as Engineering, SCM Document Control and Vendor Inspection Coordinator etc.
• Participate in review Material Data sheets. development and issuance of Material Requisition/ RFQ.
• Understands and ensure quality requirements in built into the RFQs and POs documents as well as all the package specific Quality Requirements.
• Review the Technical Bid documents submitted by vendor
• Engages in the review and response to the Technical Clarification on Quality related issues
• Issues Quality Bid Technical Evaluation report for each Bid Package
• Participates in PO award recommendation
• Interfaces with the Vendor Inspection Coordinator wherever source inspection is required.

Requirements:

• Degree in Mechanical Engineering.
• Minimum of 5 years’ experience in equipment procurement for oil & gas/ offshore industries.
• Possess CompEx certified (Module 11), ISO 9001:2015 Lead Auditor, NORSOK / PED requirement, ASME / ASTM / API codes, DNV-GL codes and standards and basic knowledge of NDT

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Main Responsibilities:

• Enforce food safety & quality systems (e.g. ISO 22000, GMP)
• Liaise directly with customers on quality / food safety issues, feedback
• Establish & ensure accuracy of information / documents (eg. product specifications) provided to customer
• Establish and improve food safety systems & standard of procedure ( SOP )
• Conduct food safety audits and ensure product consistency
• Work with R&D and Production to ensure smooth execution of new products developed to mass production
• Handle food safety and Halal audits by customers, AVA, MUIS etc Microbial testing knowledge required
• Work with Group QA/QC head to set corporate wide target and focus area
• Develop corporate wide retail product quality monitoring system (e.g. consumer complaint system; market quality monitoring system)
• Support marketing team in customer/consumer quality complaint handling

Job Requirements:

· Degree in Food Technology, Food Science, Chemistry or Microbiology.

· 7 years’ experience in Quality Assurance or Quality Management, preferably in Food Industry.

· Experience in cross countries / regional role with interaction to Senior Supply Chain or Business Management.

· Experience in managing food safety and/or quality issues including direct communication to consumer/customer.

· Knowledge and understanding of applicable legislation and standards across multiple international jurisdictions.

· Good interpersonal and communication skills.

KEY DUTIES AND RESPONSIBILITES:

• Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.
• Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
• Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
• Ensure readiness of QC Laboratory in internal / external audits.
• Maintain data integrity in Quality Control activities and ensure appropriate traceability.
• Initiate change control documents.
• Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
• Participate in New Product Introduction activities.
• 9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.
• Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
• Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
• Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
• Escalate the quality events, trends as appropriate to QC Head.
• Remain abreast of current regulatory, pharmacopeia and cGMP trends.
• Serve as subject matter expert on laboratory instrumentation and compliance issues.
• Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
• Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
• Maintains a safe laboratory environment by implementing recommendations made by EHS.
• Initiate CAPEX for equipment purchases.
• Support in budget preparation for QC Laboratory.
• Any other activities as and when assigned by the Superior.

JOB REQUIREMENTS:

• EDUCATION: Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).
• EXPERIENCE: Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

• Possess working knowledge of GMP in the pharmaceutical industry.
• Excellent interpersonal and analytical skills, good verbal, and written communication skills.
• Working knowledge of qualification, calibration, and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• Working knowledge of method development, validation, verification of analytical method.
• Familiarity of 21 CFR Part 11 requirements.

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected]. with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Associate I, Quality Control Lab – AS&T you are responsible in planning and establishing robust and effective laboratory systems, state of art equipment/technologies to support the product/method lifecycles. Maintaining laboratory compliance standards to be inspection ready. Drive and promote a continuous improvement culture to improve the quality and efficiency of QC workflow and processes in our Tuas facilities. In this role, a typical day will include:

Responsibilities

• Subject matter expert (SME) for the lifecycle of analytical/microbiological test methods:
  Manage and maintain the lifecycle of analytical and/or microbiological test methods, including method validation, method verification, method transfer, method troubleshooting & improvement, method performance periodic review.
  Develop/draft and execute protocols for method validation, verification, transfer and improvement within project timeline and budget. Create or update test procedure and data sheet. Coordinate and complete change requests.
  Perform data trending and analysis and monitor test method performance. Analyze data to identify unfavorable trends, investigate underlying causes, address issues with relevant stakeholders, implement effective actions and to drive improvement on the method robustness.
  Lead, manage and execute projects of small to medium scale and complexity.
  Review and assess external standard and/or regulatory requirements pertaining to quality control activities and implement necessary changes to ensure compliance.
  Develop Annual Product Quality Review (APQR) sub-reports and ensure timely submission of sub-reports without overdue.
  Site point of contact for global communities/initiatives pertaining to test method lifecycle.
  Provide guidance, coaching and training to the team as required. Conduct training for new or changed test procedures or techniques.

• General responsibilities:
  Meet quality objectives set by management & comply to Alcon, QMS and Safety requirements.
  Timely report non-conformance, out-of-specification, out-of-trend, out-of-expectation events. Lead or assist in root cause analyses for product defects and quality lapses, and take effective actions to prevent recurrence.
  Timely completion of all compliance activities without overdue, including but not limited to non-conformance investigation, OOS, CAPA, effectiveness check, change request, training, periodic review.
  Review/approve records/documents. Maintain integrity, accuracy and completeness of data and records.
  Compile data to support business and performance metrics reporting.
  Support and back up other AS&T projects/activities, including laboratory testing asset lifecycle, stability program, Laboratory Information Management System (LIMS)

• Improve quality and efficiency of QC workflows/processes:
  Drive and promote the continuous improvement culture. Challenge current processes, identify improvements and drive the effort to implement lab system/process while maintaining compliance and reducing human Intervention.

What You'll Bring to Alcon

• Bachelor Degree in Chemistry, Bioscience or Microbiology Engineering Related Study
• Experience with validation, verification, transfer of analytical test methods and/or microbiological test methods.
• 1-3 years experience in pharmaceutical/medical device industry with GMP knowledge.
• Good understanding of the industrial practices and regulatory requirements related to laboratory equipment and computerized systems.
• Experience of working in/with QC laboratory. Understand QC requirements and laboratory processes/workflow.
• Experience in leading or managing project.
• Experience with managing stability studies, metrology equipment, data analysis or data analytics is an added advantage.
• Certified greenbelt is an added advantage.

Why Join Us:

• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.

Executive (Corporate Procurement)

You will be supporting the Contracts and Procurement Division (Corporate) in the following areas:

What you will be working on

• To assist and support in checking procurement related documents
• To assist and support in data entries for procurement requests in JTC’s IT System (PROMPT)
• To assist in checking & verifying Corrigendum in PROMPT
• To assist in checking Award Recommendation Reports (TRR)
• To assist in checking evaluation matrices for Price and Quality scorings
• To assist and support in preparing draft Letter of Acceptance
• To assist and support in updating Contract Details in PROMPT
• To assist and support in requesting for creation of Contract Files in JTC’s IT System (KRIS)
• To assist and support in checking and uploading Security Deposit in PROMPT
• To assist and support in checking and uploading Insurance Policies in PROMPT
• To assist and support in updating changes of Project Team Members, External Consultants/Managing Agents in PROMPT
• To assist and support in preparing draft Letter of Extension
• To assist and support in performing Contract Closure (PROMPT)
• Any other procurement and contract management related administrative work as and when required

What we are looking for

Background in Procurement or Building or Quantity Surveying