• Carry out incident investigation, VDR analysis, on board audits / inspections and training as assigned.
• Assist the company with business development, where possible.
• Perform duties of Training Faculty when required.
• Visit and assess vessels for compliance with owners / managers requirements, industry regulations and best practices.
• Under the direction of the General Manager / Team Lead, ensure all assigned jobs are delivered in line with its expectations and ensure quality standards are uniformly maintained.
• Keep up to date with national, regional, and international legislative requirements and practices to support company compliance with all relevant regulations.
• Perform tasks as per the deliverables agreed with the client.
• Interface with vessel operators to ensure vessel performance standards.

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Amaris Consulting is an independent technology consulting firm providing guidance and solutions to businesses. With more than 1,000 clients across the globe, we have been rolling out solutions in major projects for over a decade – this is made possible by an international team of 7,600 people spread across 5 continents and more than 60 countries. Our solutions focus on four different Business Lines: Information System & Digital, Telecom, Life Sciences and Engineering. We’re focused on building and nurturing a top talent community where all our team members can achieve their full potential. Amaris is your steppingstone to cross rivers of change, meet challenges and achieve all your projects with success.

At Amaris, we strive to provide our candidates with the best possible recruitment experience. We like to get to know our candidates, challenge them, and be able to give them proper feedback as quickly as possible. Here's what our recruitment process looks like:

Brief Call: Our process typically begins with a brief virtual/phone conversation to get to know you! The objective? Learn about you, understand your motivations, and make sure we have the right job for you!

Interviews (the average number of interviews is 3 - the number may vary depending on the level of seniority required for the position). During the interviews, you will meet people from our team: your line manager of course, but also other people related to your future role. We will talk in depth about you, your experience, and skills, but also about the position and what will be expected of you. Of course, you will also get to know Amaris: our culture, our roots, our teams, and your career opportunities!

Case study: Depending on the position, we may ask you to take a test. This could be a role play, a technical assessment, a problem-solving scenario, etc.

As you know, every person is different and so is every role in a company. That is why we have to adapt accordingly, and the process may differ slightly at times. However, please know that we always put ourselves in the candidate's shoes to ensure they have the best possible experience.

We look forward to meeting you!

ABOUT THE JOB

The Quality Operations Specialist plays a critical role in overseeing the quality system within manufacturing and production areas. This includes monitoring, documenting, and addressing quality-related issues to ensure compliance with company standards and regulatory requirements. The role involves collaborating with various teams to uphold the highest quality standards for released batches.

Key Responsibilities:

• Ensure manufactured products adhere to company policies, processes, and procedures.
• Provide quality oversight for GMP manufacturing, including technical operations, engineering, QC labs, and supply chain activities.
• Review and approve incoming material inspections, batch records, manufacturing logs, and line-clearance activities.
• Manage the release of materials and product batches.
• Investigate non-compliance issues in materials, QC testing, manufacturing, warehousing, and products.
• Support change management processes to ensure compliance with policies.
• Conduct routine inspections of manufacturing, engineering, warehouse, and QC areas to maintain compliance.
• Contribute to new product introductions, operational excellence initiatives, and other management-assigned tasks.

ABOUT YOU

• Bachelor’s degree in Natural Sciences (Biology, Chemistry), Pharmacy, or Engineering.
• 2+ years of experience in a pharmaceutical or biopharmaceutical quality/compliance environment (GxP).
• Familiarity with quality regulations and standards affecting APIs/Biologics.
• Experience with SAP and Trackwise is a plus.
• Strong knowledge of GxP requirements and regulatory standards.
• Ability to quickly understand products and processes to address quality issues effectively.
• Commitment to maintaining high-quality standards with integrity and a strong work ethic.
• Excellent planning, scheduling, and communication skills.
• Strong interpersonal skills for effective collaboration.

WHAT WE OFFER

• An international community bringing together diverse perspectives and expertise.
• Opportunities for continuous professional development through our robust training programs.
• A vibrant workplace with frequent internal events fostering collaboration and innovation.
• Commitment to Corporate Social Responsibility through our sustainability initiatives.

Equal Opportunity

Amaris Consulting is proud to be an equal opportunity workplace. We are committed to promoting diversity within the workforce and creating an inclusive working environment. For this purpose, we welcome applications from all qualified candidates regardless of gender, sexual orientation, race, ethnicity, beliefs, age, marital status, disability, or other characteristics.

Job Description:

· Lead, manage and mentor Quality team to ensure productive and high-performance work environment.

· Develop, implement, monitor and/or improve Quality framework and Standard Operating Procedures.

· Define, develop and deploy quality assurance strategy, addressing all phases of product development.

· Maintain ISO22K manual review and documentation updates (risk assessments, specifications and procedures) to comply with food safety certification, statutory requirements, customers’ food safety standards / requirement and company policies.

· Drive project initiatives to ensure compliance with Food Quality, Safety & Hygiene standards and requirements.

· Establish and align procedures to manage export production to overseas markets.

· Lead and coordinate all internal and external audit activities with relevant parties.

· Lead and conduct investigations on feedbacks and complaints from customers and ensure CAPA completion to resolve food safety / quality issues.

· Conduct Food Safety & Hygiene and HACCP training to factory employees.

· Vet and approve all local and overseas product labelling artwork to ensure compliance with regulatory guidelines.

· Monitor product integrity by conducting routine microbiological verification testing, manage the product sensory evaluation and shelf life validation.

· Monitor plant performances, drive continuous improvement plans, fostering a food safety culture environment.

· Manage the supplier management approval program for existing and onboarding of new suppliers.

· Prepare Quality and Performance reporting to Senior Management.

Job Requirements:

· Bachelor degree in Food Science/ Technology or other relevant fields.

· Professional certificates such as FSMS, Quality Auditor, Internal Auditor/ Lead Auditor.

· Strong knowledge in GMP/ HACCP/ GFSI/ ISO22000

· At least 5 years of experiences in a food manufacturing environment.

· Candidates with experience leading team preferred.

· Meticulous and possess strong drive to detect and resolve issues.

· Excellent interpersonal and communication skills.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyze and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Bachelor’s degree in computer science, Software Engineering, or a related field (Advanced degrees are a plus).
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis)
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.

Job Summary:

We are seeking a detail-oriented and experienced Quality Control (QC) Inspector/Officer to join our team. The ideal candidate will be responsible for ensuring that all products meet the company's quality standards through thorough inspections and testing. This role requires close collaboration with production, engineering, and warehouse teams to maintain compliance with internal policies and external regulations.

Key Responsibilities:

• Conduct inspections of raw materials, in-process products, and finished goods to ensure compliance with quality standards.
• Perform routine quality checks and maintain detailed records of inspections and test results.
• Identify and report any quality issues or non-conformities to the relevant departments.
• Implement corrective actions and preventive measures to address quality issues.
• Ensure that products comply with regulatory standards and customer requirements.
• Assist in maintaining and improving quality control processes and procedures.
• Collaborate with production teams to identify opportunities for improvement.
• Prepare and maintain QC documentation, including inspection reports, test certificates, and compliance records.

Requirements:

• Diploma or Degree in Quality Control, Manufacturing, or a related field.
• Previous experience in a QC role, preferably in a manufacturing or production environment.
• Familiarity with quality standards (e.g., ISO 9001, GMP).
• Strong attention to detail and excellent problem-solving skills.
• Good communication and teamwork skills.
• Basic computer skills (e.g., MS Office).
• Knowledge of safety regulations and best practices.

Preferred Qualifications:

• Experience with quality management systems (QMS).
• Certification in Six Sigma or other quality-related disciplines.
• Familiarity with industry-specific quality standards (e.g., HACCP for food, ISO 13485 for medical devices).

Job Description:

We are seeking a dedicated and experienced Quality Controller to join our team. The ideal candidate will be responsible for ensuring that all products meet the required standards of quality and safety before reaching the customer.

Key Responsibilities:

• Inspect products and materials for quality assurance purposes.
• Ensure compliance with industry standards, regulations, and company policies.
• Conduct tests and assessments to evaluate product quality.
• Report and document any deviations or defects and suggest corrective actions.
• Collaborate with production teams to maintain consistent quality control procedures.
• Assist in implementing and improving quality control systems.

Requirements:

• Proven experience as a Quality Controller or similar role in [industry related to your company].
• Strong knowledge of quality control standards and methodologies.
• Ability to use measuring instruments and test equipment effectively.
• Excellent attention to detail and analytical skills.
• Good communication skills and the ability to work in a team environment.
• [Any additional qualifications, e.g., certifications, technical skills, etc.]

Preferred Qualifications:

• [Mention any specific preferred qualifications if applicable.]

How to Apply:Interested candidates are invited to submit their resume and cover letter via MyCareersFuture or email to [email address]. We look forward to hearing from you!

• Job Posting TitleJob Posting TitleManager, Supplier Quality
• Job Description SummaryJob Description SummaryResponsible for leading and managing Supplier Quality of Singapore Operations and work closely with external vendors to ensure the needs of the business are met through timely resolution to high impact supplier non-conformances.
• 
  

Hiring Requirements

Job Details

Collective Agreement Details

• Job DescriptionJob DescriptionRoles & Responsibilities
  Develop and provide strategic direction for overall Supplier Quality of Singapore Ops including cost of poor quality, quality assurance, regulatory compliance and part conformance.
  Appointed as main supplier focus point of contact to develop and perform customer presentations on major/critical investigations
  Lead, direct, evaluate and develop Supplier Quality Engineers to ensure their work meet established overall operations’ targets and standards through support activities such as methods and procedures, planning and revision, gage planning and review, quality and reliability engineering, review and disposition of material variances
  Support GOPS central level with corrective actions & recovery efforts for assigned suppliers.
  Liaise with GOPS Supplier Quality Lead on metrics, ZDP, CAB, urgent needs/ feedback from sites and supplier issues impacting multiple sites.
  Liaise with GOPS Supplier Quality lead on supplier status, performance and escalation / help needed.
  Execute Supplier’s Quality Business Review and ZDP activities with high pain and poor performing suppliers.
  Manage Supplier Performance metrics for the sites, i.e. Clinic Metrics, Management reviews, CABs, Non-Negotiable, present current status to leadership team and recovery efforts.
  Support Procurement/Accenture with RTV’s and RMS requests when product to be returned is needed to support an investigation.
  Review and approve supplier ETQ responses – driving to best mistake proof level as possible, ensuring the solution is robust.
  Qualification and Education Requirements
• Degree in Mechanical / Manufacturing / Production Engineering.
  MBA or a higher degree in a relevant field is advantageous.
  At least 12 years’ experience in a Precision Engineering / Manufacturing / Quality environment inclusive of at least 5 years in management position.
  Strong and sound knowledge in the concept of Continuous Improvement and Quality Assurance initiatives.
  Good analytical and technical problem-solving skills.
  Effective communication and interpersonal skills with excellent people management and leadership skills.
  

The Service Quality Associate (SQA)act as the media between internal partners and residents as well as their families. The SQA is to maintain high standards of care and service delivery, promoting residents’ well-being, and ensuring a conducive living environment for residents, through gathering feedback and working with internal partners.

Work Location: Senja Care Home

Client Care Management

• Act as the point of contact to interact and gather feedback from residents and their families to understand their needs and preferences.
• Work towards resolving issues and ensuring a positive outcome for all parties involved.
• Collaborate with internal partners within the care home to ensure a cohesive and collaborative approach to resident care and service delivery.
• Identify and share areas of improvement and provide recommendations.

Training and Activity Management

• Coordinate and deliver in-service talks to residents and staff.
• Encourage residents to participate in activities and events for their health well-beings.

Service Quality

• Monitor and evaluate the quality of care provided to residents by conducting regular assessments, audits and surveys.
• Identify areas for improvement and recommend strategies to enhance the quality of services.
• Implement initiatives to enhance resident satisfaction and improve the overall resident experience.
• Prepare reports for management and regulatory agencies as required.
• Ensure that the care home complies with all relevant regulations, policies, and procedures. Stay abreast with industry standards and best practices to maintain compliance.
• Escalate to HOD or Senior Management Team (SMT) for feedback that warrants immediate attention or has insinuation of escalation to public forum or media.
• Track all visits, feedback, recommendations and report at Vanguard Rehab and Clinical Meeting (VRCM) platform or any other platforms when necessary or required.

Administration

• Maintain accurate records of quality assurance activities, resident feedback, and compliance measures.

Requirements

• Diploma / GCE “A” level / GCE “O” level / GCE “N” level in a relevant discipline
• Possess at least 1 - 2 years working experience in Service Quality function or quality improvement programmes in healthcare or similar setup.
• Those with experience in Nursing Homes and/or long-Term Care Facility would be preferred.
• Ability to interact in at least 2 of the languages/dialects such as Malay, Mandarin or Tamil to communicate with the clients and families.
• Effective interpersonal, engagement and follow-up skills
• Detail-oriented
• Passion for quality and ageing issues
• Good written and verbal communication skills

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

This is a one-year contract role.

Internal Code: A25001

What will you do?

• We adopt an Agile development approach and work towards tech best practices and cutting-edge tools.
• We are looking for software quality engineers who are passionate about improving the quality of the Government services provide. You will be part of an in-house team tasked with developing and maintaining the citizen disbursement system.
• Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
• Performance/security testing
• Familiar with Java
• Create, maintain, and improve the automated test framework and test environments.
• Conduct testing on new features and file defects.
• Perform various tests such as manual/functional/performance/exploratory tests support UATs.
• Assist in resolving production cases.
• Participate in all agile ceremonies.
• Leadership experience

What are we looking for?

• Degree in software engineering, computer engineering, electrical engineering, or infocomm-related discipline.
• At least 3 years of professional software quality testing experience with hands-on automation
• Experience in Python
• Experience in performing API Testing
• Strong understanding of testing techniques
• Strong understanding of test-driven development, continuous integration, and continuous delivery
• Experience with open-source automated testing frameworks (Robot, Appium, Selenium)
• Enterprise level testing tools (HP Mobile Center, HP UFT, HP QC, Sprinter)
• Experience with open-source performance testing tools (JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage.
• Excellent verbal communication skills
• Proactive, self-driven and self-motivated

What do we offer?

Fun working environment

Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

This is a one-year contract role.

Internal Code: A25001

What will you do?

• We adopt an Agile development approach and work towards tech best practices and cutting-edge tools.
• We are looking for software quality engineers who are passionate about improving the quality of the Government services provide. You will be part of an in-house team tasked with developing and maintaining the citizen disbursement system.
• Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
• Performance/security testing
• Familiar with Java
• Create, maintain, and improve the automated test framework and test environments.
• Conduct testing on new features and file defects.
• Perform various tests such as manual/functional/performance/exploratory tests support UATs.
• Assist in resolving production cases.
• Participate in all agile ceremonies.
• Leadership experience

What are we looking for?

• Degree in software engineering, computer engineering, electrical engineering, or infocomm-related discipline.
• At least 3 years of professional software quality testing experience with hands-on automation
• Experience in Python
• Experience in performing API Testing
• Strong understanding of testing techniques
• Strong understanding of test-driven development, continuous integration, and continuous delivery
• Experience with open-source automated testing frameworks (Robot, Appium, Selenium)
• Enterprise level testing tools (HP Mobile Center, HP UFT, HP QC, Sprinter)
• Experience with open-source performance testing tools (JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage.
• Excellent verbal communication skills
• Proactive, self-driven and self-motivated

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Description

1. Respond to new and existing customers for inquiries.
2. Conduct quality testing and communicate product specification issues. Conduct nonconforming material or nonconforming product analysis.
3. Participate in the root cause analysis of nonconforming goods.
4. Follow the instructed corrective actions and preventive actions by superiors.
5. Secure customer formulations.
6. Control QSHE records and documents.
7. Establish formulation and blending procedures as needed.
8. Keep retain samples of products.
9. Validate COA of raw materials received and communicate any issues to the procurement and Plant Manager. Establish, update and issue GHS SDS.
10. Create certificate of analysis (COA) of products.
11. Coordinate sample delivery as required by the customer.

Job Requirements

• Minimum Diploma/Degree in Vhemistry related fields with at east 1 year related experience
• Fresh entry level graduates
• Technical Knowledge : Microsoft Office (Basic)
• Knowledge & Skills on QC Testing

Job Description:

• To collaborate with Education and Training Department, department’s Nurse Managers/Clinician and other healthcare professionals in the development of on-the- job training and nursing-related clinical competencies, Standard Operating Procedures (SOPs) and Work Instructions
• Assist in providing initial and ongoing on-the-job training for nurses in the respective department.
• To perform clinical supervision and support newly employed nurses in the respective department.
• Act as a resource person to nurses on clinical and nursing quality-related matters.
• Enhance professional nursing development in respective department through continuous mentoring, coaching and role modeling.
• To assist Nursing Quality in the management of Nursing Quality issues as to ensure high standards of nursing practice at the respective department.
• To promote a culture of safety, quality and service excellence by constant monitoring of compliances.
• To participate in nursing quality improvement-related projects.
• To participate in physician rounds and collaborate with physicians and other allie healthcare professionals so as to ensure continuity of patient care.
• To ensure correct billing of consumables used for patients.
• To perform other assignments as and when required by the Nurse Manager/Clinician.

Job Requirements:

• Possess a valid SNB Registered Nurse Practising Certificate.
• Diploma/Degree in Nursing with a strong clinical nursing background.
• Advanced Diploma in Nursing (Orthopedic, Oncology, Med-surg)
• Clinical Instructor certificate is preferred.
• Possess a valid BCLS and AED certificate.
• Minimum 5 years of Clinical experience
• Able to commit to morning and afternoon shifts
• Singaporean/PR only

Candidates are required to:

• Supervise, monitor, document and enforce factory workers’ hygiene and critical control points of production
• Assist in factory audits
• Handle any employee misconduct or issues relating to food safety and hygiene
• Maintain records and food safety standards
• Handle administrative tasks such as placing orders for factory supplies related to Quality Control and sending samples for lab tests
• Liaise with suppliers and customers relating to quality matters and documentation
• Conduct training for workers

Working hours: 8am - 6pm (Monday - Friday)

Candidates should possess the following skills/knowledge:

• Basic knowledge of food hygiene
• Relevant education in Food Science
• Competent knowledge in Word, Powerpoint and Excel
• Good understanding of GMP, HACCP and ISO22000

Knowledge in FSSC 22000/working in an FSSC 22000 environment is an advantage.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyze and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Bachelor’s degree in computer science, Software Engineering, or a related field (Advanced degrees are a plus).
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis)
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.

Compliance

• Analyse internal operational systems to ensure compliance with contractual requirements and works standards.
• Create, modify, update and implement the work methodology and procedure.
• Develop risk management strategies and managing company’s WSH requirements.
• Design control systems to address cases of violation of operational direction.
• Planning and arranging training programs for staff to meet contractual & regulatory requirements.
• Liaise with other department to ensure that operation department is in line with company’s policies.
• Advise and report to the executive management on operational related matter, risks and any other policy development.

Quality

· Oversee and point of contact for implementation of smart technology for the entire organisation. (Robotics, smart system and TMS)

• Provide strategic advice to the project staff for the understanding & identification contractual requirements
• Review of any project related correspondence and proposing a suitable strategy for preparing the response and advising on potential contractual implications arising therefrom.
• Ensure that signed contracts are communicated to project staffs and to provide contract awareness, interpretation and advice to project team.
• Formulating monthly project budgeting report for senior management monitoring and analysis.
• Perform, ensure, monitor & checking of all project monthly report submission/ claims requirements for billing.
• Assist in ISO audit and implementation

Operation

Managing certain high-profile contract/Site

Handle the day to day operational requirements

Job Responsibilities:

• Create and maintain automated test cases, test plans and test framework ensuring that they are up to date with requirements and policy changes.
• Create, maintain and improve the automated test framework and test environments .
• Conduct testing on new features and file defects
  Perform various tests such as manual/functional/performance/exploratory tests and support UATs

Assist in resolving production cases
Experience:

• At least 3 years of professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques, risk analysis
  Strong understanding of test-driven development, continuous integration and continuous delivery
• Proficiency in programming languages such as Java or Kotlin. Knowledge of Spring Boot will be an advantage
• Experience with open-source automated testing frameworks such as Cucumber, TestNg and Playwright
• Experience with open-source performance testing tools such as JMeter, Gatling, Locust or enterprise level tools such as HP LoadRunner
• Experience with open-source penetration testing tools such as ZAP, Burp Suite, SQL Map or enterprise level tools such as HP WebInspect, Nessus, CheckMarx
• Experience working in SCRUM teams
  Excellent communication and collaboration abilities
• Proactive, self-driven and motivated

Job Information

· Salary Package: Basic (starting from 2k) + Performance Bonus

· Other Benefits: Medical & Dental coverage

· Working Days: Monday – Friday + Half-day Saturday

· Working Hours: 8.30am – 5.30pm (Weekdays), 8.30pm – 12.30pm (Saturday)

· Working Location: Ubi/Eunos

· Job Contract: Full-time Permanent role

Responsibilities

• Perform daily, weekly & monthly inspection reports.
• Analyse and trouble-shooting production quality issues.
• Material receiving inspection
• Disposition of non-conforming products (incoming & outgoing).
• Handle customers’ complaint (CAR) with effective corrective actions.
• Provide training to QC inspectors.
• Liaise with client inspector on inspection point(s).
• Conduct regular line audit and drive for quality improvement.
• Conduct internal ISO audit and manage external customer audit.
• Conduct PMI, Pressure & PT tests
• To keep and update all the Welding Procedure Specifications (WPS) and
  Procedure Qualification Records (PQR)
• To keep and update all non-conformance reports (NCR), follow-up sheet, calibration status report of measuring and test equipment.
• Carry out any other duties as and when assigned by the immediate supervisor or higher management.

Requirements

• 2 years relevant working experience in related industries
• ASNT Level II
• Attention to Detail
• Strong written and verbal communication skills
• Effective time management
• Independent & keen learner
• Flexible and adaptable
• Able to manage high levels of stress
• Proficient in Microsoft applications: Outlook, Excel, Word, Power Point, etc.

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

Responsibilities:

• Work within the Quality Group and the Package Team and liaise with all project team members, such as Engineering, SCM Document Control and Vendor Inspection Coordinator etc.
• Participate in review Material Data sheets. development and issuance of Material Requisition/ RFQ.
• Understands and ensure quality requirements in built into the RFQs and POs documents as well as all the package specific Quality Requirements.
• Review the Technical Bid documents submitted by vendor
• Engages in the review and response to the Technical Clarification on Quality related issues
• Issues Quality Bid Technical Evaluation report for each Bid Package
• Participates in PO award recommendation
• Interfaces with the Vendor Inspection Coordinator wherever source inspection is required.

Requirements:

• Degree in Mechanical Engineering.
• Minimum of 5 years’ experience in equipment procurement for oil & gas/ offshore industries.
• Possess CompEx certified (Module 11), ISO 9001:2015 Lead Auditor, NORSOK / PED requirement, ASME / ASTM / API codes, DNV-GL codes and standards and basic knowledge of NDT

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

• Industry/ Organization Type: Education
• Position Title: Quality Assurance Executive
• Working Location: Seletar
• Working Hours: 5 Days, Mon – Fri (9am – 6pm)
• Salary Package: Basic Salary (Up to $5,000) + AWS
• Duration: Permanent

Key Responsibilities

• Support the Manager in performing audits to ensure adherence to standards, including those under the Private Education Act, Private Education Regulations, EduTrust Certification Scheme, and Enhanced Registration Framework.
• Evaluate audit data to pinpoint performance discrepancies, observe trends, and assess process efficiency for ongoing enhancement.
• Work alongside departments to grasp relevant frameworks, organizational policies, and procedures, and suggest modifications.
• Discover opportunities for refining audit and/ or assessment processes.
• Other tasks as necessary.

APPLY NOW!!!

• Proficient in audit management, data analysis, quality assurance, and internal controls.
• Experience in Quality Assurance within a Private Education Institution (PEI) is an added advantage
• Familiarity with the Private Education Act, Enhanced Registration Framework, EduTrust Certification Scheme, and related standards is preferred.
• Excellent problem-solving, communication, and interpersonal abilities.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71571 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

We highly encouraged all applicants to submit their applications via the LEGO Career Portal using this link: https://www.lego.com/en-us/careers/job/sr-supplier-quality-engineer-6f94007108221000602a9e2e02f30000

Core Responsibilities:
• Be the key person in providing high quality solutions to assigned tasks to go beyond the set goals. Cases, for example, claim/big incident handling etc.
• Perform and execute independently all assigned quality assessments and audits for potential suppliers and existing suppliers to look for and evaluate supplier quality capability improvements or upgrading opportunities and take ad hoc actions.
• Follow up & monitor with well formulated plan & steps of all audit NC status or supplier quality improvement projects to uplift supplier platform capabilities & performance.
• Follow up designed data analysis tasks, which add value to supplier performance monitoring and business/operating plan related decision-making
• Proactively involve in activities, continuously contribute on sustainable supplier platforms through understanding the company, business category’s strategies, intelligently transform things for significantly improved results

• Role authority: declare supplier quality audit result. Approve/reject supplier’s reaction for customer claim.

Do you have what it takes?

• More than 8 years working experience on quality or engineering; certified lead auditor for VDA 6.3 will be preferred
• More than 8 years on hands experience of handling quality issues or shop floor control on plastic or electronics products;
• insightful Complex global collaboration skills and key stake holder management
• Profound project management experience to be competent at global quality big case handling
• Certificated Lead Auditor for ISO 9001
• Qualified Auditor for VDA6.3（nice to have）
• Good understanding on lean and quality tools like SPC, MSA, FMEA, 8D etc.
• Reading/writing/speaking is requested frequently for English.(C1)

No relocation assistance is offered for this position

Applications are reviewed on an ongoing basis. However, please note we do amend or withdraw our jobs and reserve the right to do so at any time, including prior to any advertised closing date. So, if you're interested in this role we encourage you to apply as soon as possible.

What’s in it for you?

Here is what you can expect:

Family Care Leave - We offer enhanced paid leave options for those important times.

Insurances – All colleagues are covered by our life and disability insurance which provides protection and peace of mind.

Wellbeing - We want our people to feel well and thrive. We offer resources and benefits to nurture physical and mental wellbeing along with opportunities to build community and inspire creativity.

Colleague Discount – We know you'll love to build, so from day 1 you will qualify for our generous colleague discount.

Bonus - We do our best work to succeed together. When goals are reached and if eligible, you'll be rewarded through our bonus scheme.

Workplace - When you join the team you'll be assigned a primary workplace location i.e. one of our Offices, stores or factories. Our hybrid work policy means an average of 3 days per week in the office. The hiring team will discuss the policy and role eligibility with you during the recruitment process.

Children are our role models. Their curiosity, creativity and imagination inspire everything we do. We strive to create a diverse, dynamic and inclusive culture of play at the LEGO Group, where everyone feels safe, valued and they belong.

The LEGO Group is highly committed to equal employment opportunity and equal pay and seeks to encourage applicants from all backgrounds (eg. sex, gender identity or expression, race/ethnicity, national origin, sexual orientation, disability, age and religion) to apply for roles in our team.

Research shows that women and people from different underrepresented backgrounds often only apply for a job if they meet 100% of the listed qualifications. For all candidates, if you dream of being a part of our team and you meet many, but not all of our listed qualifications for this role, please apply.

The LEGO Group is fully committed to Children’s Rights and Child Wellbeing across the globe. Candidates offered positions with high engagement with children are required to take part in Child Safeguarding Background Screening, as a condition of the offer.

Thank you for sharing our global commitment to Children’s Rights.

Just imagine building your dream career.

Then make it real.

Join the LEGO® team today.

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build.

You will be responsible for designing, implementing and maintaining the product testing coverage from development to production environments. You will be part of an Engineering team that is working on problems in a number of areas, including design, plan, execute acceptance criteria define in user stories, detecting security vulnerability or application performance issues and conduct extensive exploratory testing to reduce the potential risks will be encountered by end users. Your focus is developing automated test scripts rather than finding bugs. Your job is to accelerate product development by helping developers help themselves.

You will typically work in small, nimble teams that collaborate on common problems across projects and across focus areas. As a result, you will have exposure to a broader set of problems, which allows for fast career growth and proximity to abundant technical problems.

Quality Engineers are focused on the hardest, most interesting aspects of delivering high quality software. For someone who wants to learn and grow as an engineer, having access to all of cutting edge technologies and platform, along with the vast compute infrastructure provides a unique opportunity.

• Build advanced automated test suites to exercise our world-class applications.
• Work with the development and other engineering teams to automate testing, applying risk-based strategy.
• Conduct static and dynamic application security testing (SAST) and (DAST).
• Conduct load and performance testing to identify application bottleneck.
• Conduct research on emerging technologies related to application quality.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Work with Product Owner and Business Analyst to craft out user story acceptance criteria.
• Conduct application performance and security testing to ensure we have a robust and secured system in place.
• Implement and maintain regression test suite in QA nightly build.
• Actively refine smoke test suite in Development CI environment.
• Lead system integration testing with other system owners.
• Manage user acceptance testing/alpha testing and defect life cycle.
• Drive continuous improvement in Agile testing practices and tools.
• Ability to interpret the application source code and experience of using different cloud providers services such as AWS, AZURE and GCP

What are we looking for?

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.
• Min 5 years experience in one or more of the followings:
• Application exploratory testing and regression test automation
• Application performance testing
• Application security testing
• Strong analytical skills.
• Meticulous attention to details.
• Good interpersonal skills such as tactfulness.
• Good presentation and listening skills.
• Experience in agile development environment will be an added advantage.
• Experience with open source automated testing framework like Playwright, Cypress, Robot Framework, Cucumber, Appium, Selenium or enterprise level testing tools (Tricentis QTest/TOSCA, Micro Focus UFT or Micro Focus ALM/Quality Center) will be an added advantage.
• Experience with open source performance testing tools like K6, JMeter, Locust or enterprise level testing tools (Micro Focus LoadRunner) will be an added advantage.
• Experience with open source security testing tools like ZAP, Burp Suite, SQL Map, Clair, etc or enterprise level security tools (Mirco Focus Fortify On Demand, Prisma Cloud, Veracode, Nessus or CheckMarx) will be an added advantage.
• Experience to setup the pipeline with CICD tools, such as GitLab, Bamboo.
• Certified Software Testing Professional and/or Certified Software Quality Analyst and/or CREST/OSCP certification will be an added advantage.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.