Have Quality Control experience,can read drawiings,can use measuring tools,can use three-dimensional coordinate measuring instruments,can complete work tasks independently,have a team spirit,can lead a quality inspection team,can be responsible for matters related to the quality inspection department, For quality inspection reports,etc,you will use computer office software and have at least 3-5 years of quality inspection work experience.

The Supplier Quality Engineer will be based in Changi South.

Job Responsibilities

• Attend day to day part quality issues / MRB reviews.
• Serve as the primary point of contact for all supplier-related quality issues.
• Cross-Functional Collaboration: Collaborating with internal teams, such as Engineering, Procurement / Buyer, Planner, Operation, Logistic to address any supplier-related quality issues.
• Collaborating with suppliers to identify root causes of quality issues and implementing effective corrective and preventive actions. Review CAPA effectiveness, ensure no repeating occurrence.
• Work with IQC team in reviewing incoming parts from suppliers with no defects and ensure quality.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders as well as customers.
• Seek for Continuous Improvement with suppliers.
• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.
• Support supplier audits to ensure compliance with quality standards and regulatory requirements.
• Support evaluation and approve new suppliers based on quality performance and capability assessments.
• Documentation: Maintaining accurate records, reports, and documentation related to supplier audits, evaluations, and inspections.
• Supports supply chain in the selection and qualification of suppliers’ parts being procured - FAI (First Article Inspection).
• Any ad-hoc duty as assigned by Superior.

Job Requirements

• Requires a Bachelor’s Degree in Engineering or related field with minimum 3-4 years of related experience.
• Requires experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers, internal teams, and customers.
• Able to read blueprints and/or drawing standards.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

The Client is a global aerospace company.

Responsibilities:

• Ensure product and process quality by maintaining the quality management system and complying with relevant regulations and customer requirements.
• Update and improve quality procedures and control instructions.
• Address non-conformance issues with customers, vendors, and suppliers, conduct root cause analysis, and implement corrective actions to minimize quality-related costs.
• Conduct internal audits to assess the quality system, products, and processes (ISO9001 / AS9100 / NADCAP).
• Perform audits of vendors and on-site as needed.
• Adhere to customer and regulatory standards.
• Work to reduce monthly costs associated with poor quality and scrap.

Requirements:

• Degree in Mechanical or Aeronautical Engineering or a related field.
• At least 2 years of experience with ISO9001 / AS9100 Quality Management System and NADCAP.
• Proficiency in problem-solving tools such as fishbone diagrams, FMEA, and the 5-whys methodology.
• Ability to read and interpret technical drawings.
• Strong analytical and communication skills.
• Ability to multitask and attention to detail.
• Familiarity with NADCAP processes like heat treatment, non-conventional machining, shot peening, and chemical processing is a plus.

· Responsible for developing, implementing, and maintaining Quality Plan for FA and production parts.

· Responsible for maintaining company measuring instruments.

· Interpret and analyse customer specifications with great details

· Identify, document, and report defects or anomalies, working closely with cross-functional teams to address and resolve issues promptly.

· Facilitate meetings for production and quality personnels

· Support in internal and external audits.

· Maintaining Company’s Quality Management System (QMS)

· Any other duties as assigned by Supervisor.

Job Requirements:

· Technical certificates in any Engineering field

· Effective communication skills, both written and verbal, to liaise with customers and suppliers

· Ability to work with production and office staffs

· Ability to write root cause analysis

· Flexibility and adaptability to take on new challenges and responsibilities.

· Ability to read and interpret mechanical drawings

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Responsibilities

· Be the subject matter expert for business validations in the Forward and Reverse workstreams.

· Partner with Capability Architects to build and own test strategy, test plan, test scenarios and test cases leading to QA validations and sign-off on assigned projects.

· Work with third-party partners to perform end-to-end supply-chain integration testing.

· Evaluate and execute applicable test cases.

· Document all test results and ensure execution results up to date.

· Keep stakeholders well-informed of testing progress and statuses.

· Be able to articulate issues, problems, impacts, and support needs across different internal teams as well as external teams.

· Innovate and suggest out-of-the-box solutions to improve productivity and processes.

Must-Have Skills

· Supply Chain Management Major.

· At least 5 years of hands-on experience working on essential aspects of Order Management Forward Flow (O2C) and Reverse Flow (I2R/RMA).

· At least 2 years of hands-on testing experience working with Oracle Fusion Supply Chain.

· Hands-on experience in writing SQL queries and understanding/modifying XML files.

· Excellent documentation and communication skills.

· Well-versed in creating test plans and test cases.

· Great sense of urgency, thoroughness, and quality towards assigned tasks/goals.

· Hands-on experience in debugging problems through system logs.

Must have: In-depth supply chain management knowledge, QA expertise with functional testing, Oracle Fusion.

Nice to have: Python, Java- selenium

Good-to-Have Skills

· Hands-on experience in developing automation tests, preferably in Supply Chain.

· Hands-on experience in programming languages such as Java, Python.

· Experience with automated testing tools like Selenium.

· Knowledge of Electronic Data Interchange (EDI) and how the EDI signals are processed.

Job Description:

• Responsible for product quality assurance.
• Completes all administrative activities associated with quality inspection.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Downloads quality information from quality system to be used for Quality reports.
• Plans and directs activities concerned with the establishment and/or continuance of process related requirements and other quality programs.
• Prepares quality documentation or equivalent.
• Prepares Statistical Process Control Charts where required.
• Responsible for authorizing the released of final products to customer.
• Supervises inspectors or technicians on the inspection plan.
• Directs inspectors or technicians engaged in measuring, inspecting and/or testing products or parts and tabulating data.
• concerning materials, product or process quality and reliability.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering
• to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets
• through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Job Requirements :

• Diploma / ITC / NTC in Mechatronics/ Electrical & Electronics engineering or related discipline, preferably with 2 years in manufacturing environment.
• Proficiency in written and communication skills in English.
• Practical computer skills and knowledge with hands-on ability.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Able to use microscope for inspection and verification.

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has setup their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Main Purpose of Job:

This new position is responsible for performing production-related inspection jobs, carrying out equipment and calibration, and maintaining documentation and records.

Key Duties & Responsibilities:

· Prepare the lab for ISO 9001:2015 certification audits, including laboratory equipment qualification and method validation.

· Responsible for manufacturing management and quality control (QC) based on the quality assurance system (QAS)

· Design and develop forms, work instructions and methods for testing and evaluation.

· Utilizing knowledge in engineering fields for chemical and product quality inspection.

· Ensure lab equipment/instrument calibration and maintenance are maintained as planned.

· Trend and feedback of monitoring data to relevant sections and drive for investigation and action as necessary.

· Chemical Analysis of products using ICP, X-ray diffractometer, HPLC, FTIR, particle size analyser, UV, Endotoxin test and chloride, sulfate, carbonate limit test.

· Carry out TOC, Endotoxin test, and environmental monitoring tests.

· Carry out maintenance and calibration of equipment. Maintain accurate inspection, maintenance, and calibration of records.

· Perform investigation when the test is out-of-spec or abnormal.

· Prepare validation documents and carry out the qualification of equipment etc.

· Cross function collaboration to achieve compliance with quality requirements, improvements, development and implementation of new products /processes, supporting customer complaints, etc.

· Process explanation and audit support in customer audit

· Corrective and preventive action (CAPA) support

· Perform all other duties assigned by the supervisor or manager.

Education:

Diploma in a scientific discipline or possess equivalent experience or higher.

Experience:

· Five years’ experience in a medical device or pharmaceutical laboratory environment

· Have experience with lab equipment such as HPLC, ICP, FT-IR, UV Spectrometer and environmental monitoring sample testing.

· Familiar with ISO 9001:2015 requirements.

Proficient in Microsoft Word and Excel

Working Conditions:

Work is generally performed within an indoor laboratory environment with adequate temperature. Personal protective equipment (PPE), such as a Laboratory coat, Safety shoes, Appropriate gloves, hearing protection, Respiratory Protection etc., will be required for potential exposure to hazardous chemicals and noise hazards.

Note: This role requires frequent travel and will be based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Key Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to address and resolve abnormal quality issues within the manufacturing process.
• Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Drive efforts to improve internal quality control procedures and enhance process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead initiatives to resolve customer-reported quality issues, ensuring timely and effective resolutions.
• Prepare detailed reports for stakeholders outlining corrective actions and preventive measures.
• Develop and implement strategies to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to enhance inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a unified approach toward achieving quality objectives.
• Manage personnel-related tasks, including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Oversee the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor’s degree in a relevant field; advanced degree preferred.
• A minimum of 6-8 years of proven experience in quality management, particularly within manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience collaborating with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.
• Willingness to travel frequently and be based in China and Vietnam for at least 10 months per year (separate living accommodations provided). The role includes annual 4 round-trip tickets back to Singapore.

Quality Technician (Jurong Island)

Responsibilities

• Support production shift team with sample testing
• Cleaning and preparation of sampling apparatus, Ampule, gel bottles and other laboratory glassware.
• Prepare reagent and standard sample for analytical equipment.
• Report abnormalities and support troubleshooting of equipment.
• Review and revise for QC process flow, control plan and SOP of analytical such as non-prime product, process problems and complain.
• Investigate root cause and take corrective action plan.
• Planning for analytical process modification and analytical process change.

Requirements

• Min NITEC or Diploma in Chemical Engineering field or other relevant certificates
• Possess Analytical knowledge and Skills such as gas chromatography, gel permeation chromatography, Fourier infrared analysis, gel analysis, Karl Fischer’s method and titration method) are preferred
• Highly motivated, a team player, with the ability to multitask and project management skills
• Understand quality policy and basic rule.

Interested applicants please submit your resume to [email protected]

Job Description:

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements:

• Minimum Diploma or Degree in Chemistry, Food Science and Technology, Analytical Chemistry or equivalent in years of similar experience.

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

i. Monitor/manage feedback from multiple feedback channels (e.g.calls to contact centre, emails to public facing inboxes, as well as other digital and traditional platforms);

ii. Monitor and manage Authority’s contact centre;

iii. Manage and enhance Authority’s Customer Management System (CMS) by working closely with system vendor on the deployment of system enhancements by stipulated timeline;

iv. For cases handled by SQO, ensure that final replies are issued to feedback providers within the service timelines (See ANNEX C);

v. Respond to requests from operation divisions for vetting of replies within one working day;

vi. Submit monthly data analytics report on NParks and AVS overall case management performance for current month by the end of the next month;

vii. Implement any other Service improvement initiatives when assigned

Monday to Friday - 8.30 AM to 6.00 PM

Working location : 1 Cluny Road , Singapore 259569

Job Requirement :

Degree in mass communications, marketing, or related discipline;

(b) At least 3 years’ relevant experience in customer service management, call centre management or quality service management;

Job Scope:

• Develop and implement quality control procedures and policies
• Conduct inspections and audits to ensure compliance with quality standards
• Monitor and test materials, products, and processes to verify quality
• Identify and resolve quality issues and non-conformance
• Review project specifications, drawings, and standards for quality requirements
• Prepare quality reports and document test results and inspections
• Coordinate with suppliers and subcontractors to ensure quality requirements are met
• Perform root cause analysis for quality failures and implement corrective actions
• Ensure that safety and environmental standards are followed during inspections
• Train and mentor staff on quality control processes and best practices
• Maintain records of quality inspections, certifications, and test results
• Support project managers in quality planning and control
• Ensure continuous improvement in quality processes and systems

Requirements:

• Engineering degree
• 5+ years of QA/QC experience in construction
• Experience in structural steel or precast RC works
• Strong interpersonal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible for ensuring wafer products meet quality standards by developing shipment procedures, improving processes, resolving anomalies, and overseeing staff training.

Key Responsibilities :

• Develop and maintain wafer product shipment standards and procedures to ensure alignment with customer quality requirements.
• Improve the quality of wafer product shipments by identifying areas for enhancement and implementing corrective and preventive actions.
• Analyse and address quality control inspection anomalies, promptly resolving customer complaints.
• Conduct process analysis and lead continuous improvement initiatives for semiconductor products to elevate overall product quality.
• Oversee training and certification programs for quality control personnel to ensure strict adherence to quality standards and procedures.

Education Qualification & Essential Experiences:

• Bachelor's degree or higher in Electronics, Materials, Chemical Engineering, or other related engineering or science disciplines
• At least 1 years of relevant work experience.

Personal Attributes:

• May need to travel to Taiwan for a training period lasting 6 to 9 months.
• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Summary Benefit:

• Salary range: $2000-$2800
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

Service Assurance Architect - In this new role, you will be managing the Day 1 Technical Services and Day 2 Managed Operations Service offer who is going to report to Delivery team. This function will serve as Check and Balance for any new pursuit between Sales, Pre-Sales and Delivery.

You Will:

New Pursuit Evaluation:

• Early Involvement: Service Assurance participates in initial sales meetings and bid reviews to assess the feasibility and risks of new opportunities.
• Service Fit: They determine if the proposed solution aligns with the organization's standard service catalogue and can be delivered with existing capabilities.
• Due Diligence: Service Assurance performs due diligence on potential clients, reviewing their requirements, technical environment, and any potential challenges.
• Go/No-Go Decisions: They provide input on whether to pursue an opportunity based on their assessment of risks, resource availability, and potential for success.
• Act as Technology Infrastructure SME for Network & Security Design. (Critical)

Standardization Check:

• Mapping to Standards: Service Assurance ensures that proposed solutions map to standardised service offerings, configurations, and delivery processes.
• Deviation Management: If customization is required, they assess the impact of deviations from standards and ensure they are documented and approved.
• Knowledge Base: They maintain a knowledge base of standard services, configurations, and best practices to guide solution design and delivery.

SLA Negotiations:

• Realistic SLAs: Service Assurance works with Sales, Pre-sales and Delivery to define SLAs that are realistic, measurable, and achievable based on the organization's capabilities and resources.
• Performance Metrics: They establish clear performance metrics and measurement methods to track SLA compliance.
• Risk Assessment: They assess the risks associated with meeting specific SLAs and identify potential mitigation strategies.

Risk Assessment:

• Proactive Identification: Service Assurance architect proactively identifies potential risks across all stages of the service lifecycle, including technical, operational, financial, and reputations risks.
• Risk Analysis: They analyse the likelihood and impact of identified risks, using tools like risk matrices and probability assessments.
• Mitigation Planning: They develop and implement risk mitigation plans, outlining specific actions to reduce the likelihood or impact of risks.

Sizing and Scoping:

• Resource Estimation: Service Assurance works with Delivery to accurately estimate the resources required to deliver the proposed solution, including personnel, technology, and time. He/she will also be based on Standard Service Catalogue and sizing calculator as a base to do the estimate. Any deviation of the costing will need to be signed off and any major deviation will need to be documented as risk.
• Scope Definition: They help define the scope of work, ensuring it is clearly documented and agreed upon with the client.
• Costing and Pricing: They provide input on costing and pricing models to ensure profitability and competitiveness.

Continuous Improvement

• Performance Analysis: Analyse service delivery performance data to identify trends, areas for improvement, and opportunities to optimize processes and efforts sizing in the Standard Service catalogue.
• Innovation: Explore new technologies, methodologies, and best practices to enhance service delivery and drive continuous improvement.

You Bring:

Education:

• Bachelor’s degree in information technology, Computer Science, Engineering, or a related field.
• Relevant certifications are highly valuable, such as ITIL (Information Technology Infrastructure Library), Cloud Certifications, CCIE-R&S, Security, Data Centre, Service Provider, Advance Design. etc.

Experience:

• Years of Experience: At least 10 years of progressive experience in Pre-Sales, Technical Architect, or IT service management
• Service Design and Delivery: Proven experience in designing, implementing, and managing IT services, with a focus on quality, reliability, and efficiency.
• Risk Management: Demonstrated experience in identifying, assessing, and mitigating risks associated with IT service delivery.
• SLA Management: Experience in defining, negotiating, and managing service level agreements (SLAs).
• Compliance and Governance: Experience in ensuring compliance with relevant industry regulations, standards, and legal requirements.
• Process Improvement: Experience in analyzing and improving service delivery processes to enhance efficiency and effectiveness.

3.Technical Skills:

• IT Infrastructure: Strong understanding of IT infrastructure components, including networks, servers, storage, and databases.
• Cloud Computing: Familiarity with cloud computing platforms and services (e.g., AWS, Azure, GCP).
• Automation: Knowledge of automation tools and technologies used in service delivery (e.g., RPA, scripting).
• Monitoring Tools: Experience with service monitoring and management tools.
• Data Analysis: Ability to analyse service performance data to identify trends and areas for improvement.

4.Soft Skills:

• Communication: Excellent written and verbal communication skills, with the ability to effectively communicate technical information to both technical and non-technical audiences.
• Collaboration: Strong collaboration and interpersonal skills, with the ability to work effectively with cross-functional teams.
• Problem-Solving: Excellent analytical and problem-solving skills, with the ability to identify and resolve complex issues.
• Leadership: Demonstrated leadership skills, with the ability to influence and guide others.
• Presentation Skills: Ability to create and deliver effective presentations to stakeholders.

5.Beyond the Basics:

• Experience in the SI is a must.
• Consulting Experience: Prior experience in a consulting role can be beneficial, as it often involves working with different clients and solving diverse challenges.
• Agile and DevOps: Familiarity with agile methodologies and DevOps practices is increasingly valuable in today's fast-paced IT environment.