Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

The purpose of this job is to assist the Company with the quality assurance activities on an ongoing basis. The role entails a variety of responsibilities, such as:

• Perform incoming material (e.g. cement, sand, etc), in-process and outgoing materials(UHPC Quality Mix) inspection activities according to the QAQC procedures and plans to ensure compliance with ISO and in-house standards.
• Operate and maintain QAQC laboratory equipment properties (e.g., TGA, BET, PSA, SEM, XRD, sieve analysis) to ensure optimal performance for analysing material, manage the safe storage of hazardous materials, and assist with periodic quality audits.
• Preparation of sampling list for weekly production and maintain the consumables inventory item at laboratory.
• Collect samples for incoming raw material quality checks.
• Manage retention samples, including proper labelling and organized storage.
• Maintain laboratory premises and equipment in accordance with the Company’s standards.
• File & maintain product inspection records.
• Perform 5S and laboratory housekeeping.
• Support the company’s research and development initiatives.
• Execute any additional duties or ad hoc tasks as assigned.
• Strictly adhere to safety standards in all activities to ensure a safe working environment for all.

Responsibilities

· To be responsible for Quality Assurance matters

· To provide accurate course information, including funding terms and conditions to sales team, learners and corporate clients

· To administer learner satisfaction surveys

Qualifications

· Degree in any major

·Excellent command of written and spoken English

· Pleasant disposition with strong communications skills

· Experionce in training industry or quality assurance is an added advantage

• Well Established Company
• Basic $3200 - $3600 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Responsible for QMS document control, including document implementation, distribution, retrieval, obsolescence, archiving and maintaining the QMS document master list, obsolete list, distribution list, training matrix etc.
• Responsible for reviewing contents of QMS documents to comply to QMS document requirements
• Assist in conducting line audits to ensure operations and quality control adhere to the controlled WI/PWI/EWI and inspection criteria
• Ensures timely completion of DHR records in compliance with GDP/data integrity requirements
• Conducts New Employee Induction training on QMS awareness and document and records control requirements
• Responsible for calibration activities, including measurement equipment numbering assignment, updating of calibration master list, liaising with calibration suppliers for measurement equipment calibration. Review and maintain calibration certificates, tracks equipment identification and calibration status and manage the updates of for reference or out of service equipment as well as equipment list update etc.
• Support internal audit, external audit, and customer audit, responsible for working with relevant department on document preparation and review of documents for audits
• Supports quality department document (procedure, WI/EWI/PWI, forms) drafting, updating and review
• Responsible for routine 5S checks and identifying gaps and opportunities for continuous improvement
• Any other duties as assigned on an as-needed basis

Job Requirements:

• Possess minimum Diploma in relevant subject area and 1-2 years’ experience in QMS role in a medical device company

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

The opportunity: your next adventure awaits

EY Assurance group is one of the most trusted, respected and influential business unit in the industry. As part of our team, you will provide our clients including companies, investors and regulators a peace of mind by using your skills and experience to build confidence in the validity of financial statements and business-critical information or processes.

Emerging and Private Enterprises (EPE)

The EPE sector is set up to address the specific needs of private companies and their stakeholders. It supports the private and mid-market companies through delivering quality audit services and help these companies decide how to grow in a technology-driven and sustainable way. We are moving towards digitalizing audit. To keep pace with the fast-changing world, we are prioritizing investments in AI, predictive analytics, and other emerging technologies to gain a competitive edge, reskilling employees and redesigning jobs to seamlessly integrate people and machines.

You will experience professional development through diverse experiences, world-class learning and individually tailored coaching. We also offer EY Professional Qualification Program that support your professional growth and aspiration. That’s how we develop outstanding leaders who, in turn, deliver on our promises to all our stakeholders, and in so doing, play a critical role in building a better working world for our people, for our clients and for our communities.

Your key responsibilities

• Support the planning, execution and delivery of assurance engagements.
• Perform a variety of assigned tasks and audit work procedures for a portfolio of diversified clients in different industries.
• Clearly and accurately document the execution of specific audit procedures as defined by the engagement objectives, planned audit approach and procedures, and global audit methodology.
• Recognize potential audit issues or unusual relationships from basic analysis of the financial statements and related information and communicate them to the assurance team.

Tertiary education in relevant fields is preferred

· Experience in programming in Java / Python / NodeJs is preferred

· Hands-on experience with software testing including automated functional testing tools such as Cucumber, Selenium, Maven, Capybara is preferred.

· Experience doing automation testing in Agile development process will be an added advantage

· Have SQL scripting skills

· Hands-on experience in one or more of the followings is preferred:

• Application exploratory testing and regression test automation
• Application performance testing
• Application security testing

Have relevant knowledge of software QA methodologies, tools, and processes

Hands-on experience with performance testing tools such as JMeter, Gatling will be an added advantage

Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage.

Strong analytical and problem-solving skills

Good presentation and listening skills

Good writing skills

Good communication and interpersonal skills

Team player

Meticulous attention to details

Able to multi-task, take initiative and work independently with multiple stakeholders

Job Responsibilities:

• Establish XDC Singapore site quality system, ensure it complies with FDA, EMA and PICs GMP requirement;
• Continue monitor and improve site quality performance, ensure quality system being healthy running
• Ensuring appropriate training is delivered to all personnel involved in GMP activities
• Responsible for monitoring and assessing the changes of applicable regulations, ensuring the continuous compliance
• Facilitating regular management reviews of process performance, product quality and of the Pharmaceutical Quality System and advocating continual improvement;
• Ensuring that a timely and effective communication and escalation process exists to raise quality issues to the appropriate levels of management.
• Be responsible for documentation lifecycle management
• Be responsible for regularly reviewing and assessing the quality metrics
• Be responsible for establish Quality Risk Management Plan, ensure implementation per schedule and follow up mitigations (if any) till completion
• Be responsible for product complaints handling
• Be responsible for product recall if any
• Ensuring internal audit program is implemented at site
• Responsible for managing external inspection, e.g., client audit, regulatory inspection etc.
• Other tasks assigned by the supervisor.

Requirements:

• Bachelor degree or above, majoring in Biologics, Pharmacy, Pharmaceutical Engineering, Bioengineering or other relevant majors
• 10+ years’ working experience in production and/or quality management in biopharma, with 8+ years in production QA or quality system QA.
• 5+ years’ experience in team management
• Be familiar with FDA, EMEA, PICS GMP requirement
• Experience with quality system set up for new site is preferred
• Experience with Biopharma commercial quality system is preferred
• Familiar with quality management requirement throughout the whole product lifecycle, including process development, clinical and commercialization.

· Tertiary education in relevant fields is preferred

· Experience in programming in Java / Python / NodeJs is preferred

· Hands-on experience with software testing including automated functional testing tools such as Cucumber, Selenium, Maven, Capybara is preferred.

· Experience doing automation testing in Agile development process will be an added advantage

· Have SQL scripting skills

· Hands-on experience in one or more of the followings is preferred:

• Application exploratory testing and regression test automation
• Application performance testing
• Application security testing

Have relevant knowledge of software QA methodologies, tools, and processes

Hands-on experience with performance testing tools such as JMeter, Gatling will be an added advantage

Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage.

Strong analytical and problem-solving skills

Good presentation and listening skills

Good writing skills

Good communication and interpersonal skills

Team player

Meticulous attention to details

Able to multi-task, take initiative and work independently with multiple stakeholders

Tertiary education in relevant fields is preferred

· Experience in programming in Java / Python / NodeJs is preferred

· Hands-on experience with software testing including automated functional testing tools such as Cucumber, Selenium, Maven, Capybara is preferred.

· Experience doing automation testing in Agile development process will be an added advantage

· Have SQL scripting skills

· Hands-on experience in one or more of the followings is preferred:

• Application exploratory testing and regression test automation
• Application performance testing
• Application security testing

Have relevant knowledge of software QA methodologies, tools, and processes

Hands-on experience with performance testing tools such as JMeter, Gatling will be an added advantage

Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage.

Strong analytical and problem-solving skills

Good presentation and listening skills

Good writing skills

Good communication and interpersonal skills

Team player

Meticulous attention to details

Able to multi-task, take initiative and work independently with multiple stakeholders

Summary Benefit:

• Salary range: $2000-$2800
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

Candidates are required to:

• Supervise, monitor, document and enforce factory workers’ hygiene and critical control points of production
• Assist in factory audits
• Handle any employee misconduct or issues relating to food safety and hygiene
• Maintain records and food safety standards
• Handle administrative tasks such as placing orders for factory supplies related to Quality Control and sending samples for lab tests
• Liaise with suppliers and customers relating to quality matters and documentation
• Conduct training for workers

Working hours: 8am - 6pm (Monday - Friday)

Candidates should possess the following skills/knowledge:

• Basic knowledge of food hygiene
• Relevant education in Food Science
• Competent knowledge in Word, Powerpoint and Excel
• Good understanding of GMP, HACCP and ISO22000

Knowledge in FSSC 22000/working in an FSSC 22000 environment is an advantage.

Job description

A reliable Engineer of Quality Assurance to ensure that all external and internal requirements are met before our product reaches our customers. She will be responsible for inspecting procedures, outputs and identifying mistakes or non-conformity issues.

An excellent Engineer with industry proficiency in 2D/ 3D dimensional inspection, Knowledge of geometric measurements and CMM. She is equipped with rich experience, quality control background with eagle eyes and if obtained a certification of ISO 13485/ 9001 Quality Management Systems Internal Auditor added an advantage.

A reliable, trustworthy and competent professional whose approval will be necessary for the continuation of a business life cycle. The goal of the quality management system is to assure the high quality of our operations and services aiming to the long-term success of our business.

Duties & Responsibilities

1. Conduct the training of ISO 9001:2015/ 13485:2016 for work procedures to operation and production

2. In-house training to guide inspectors, technicians and other staff for engineering symbol & geometric dimensioning & tolerance drawing quality specification

3. Supervise equipment and tools are duly calibrated

4. Devise procedures to inspect and report quality issues

5. Assure the reliability and consistency of production by checking processes and final output quality of finished parts/ components and materials

6. Monitor all operations that affect quality

7. Report all malfunctions to production manager to ensure immediate action

8. Implement corrective action (CAR) / non-conforming report to operations effectively

9. Facilitate proactive solutions by collecting and analysing quality data

7. Keep records of quality reports, statistical reviews and relevant documentation

8. Review current standards and policies, work procedure (SOP), and update written procedures (DCN), engineering work instructions or specifications (ECN)

9. Work as a team to evaluate, validate customer quality issues and complaints, or/ and special quality requirements from customers for quality assurance on geometric symbol, tolerance and dimensioning

10. Communicate with external quality assurance officers during on-site inspections

11. Appraise customers’ requirements and make sure they are satisfied

12. 5.5-day work week

Requirements

Ability to read and interpret engineering drawings is a strong advantage

1. Degree/ Diploma in engineering or relevant field

2. Proven experience as a quality assurance engineer or relevant role

3. Thorough knowledge of methodologies of quality assurance and standards

4. Excellent numerical skills and understanding of data analysis/statistical methods

5. Resourceful and attention to detail and a results driven approach

6. Excellent organizational and leadership abilities with good communication and interpersonal skills

Position Summary

This position is involved in Supplier Quality activities that improve, monitor and measure Illumina’s compliance with the Quality System Regulations, Illumina Quality policies, FDA regulations and ISO standards as well as Illumina product quality for current operation and compliance objectives.

Position Responsibilities

· Support qualification of new Suppliers and Partners for materials and services including risk assessments, audits and other supplier on-boarding activities.

· Provide support to investigation teams in determining root causes on material quality issues and initiate/ensure corrective and preventive action plans are developed and executed.

· Interface with Suppliers/CM (Contract Manufacturer), Engineering/ Manufacturing/ Quality Assurance/ Procurement departments to drive for quality improvements, specifically on incoming rejects, workmanship defects and primitive failures.

· Participate in Quality review activities with supplier/CM to identify improvement opportunities to meet quality expectation.

· Constantly review quality processes and suggests improvements that can be implemented to improve performances.

· Support Supplier/CM development and risk management activities

· Compile, evaluate and report on supplier/CM quality performance metrics for scorecard and monitoring

· Monitor to ensure supplier’s preventive and corrective actions are implemented and effective

· Participate with NPI team in selection of new suppliers

· Other such duties that may be determined by Management

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements

· Experience in directly working with Contract Manufacturer/Suppliers

· Experience in conducting supplier audits.

· Developing basic knowledge of quality tools.

· Beginning to intermediate experience with Microsoft tools and spreadsheets, charting, graphing tools and presentation tools.

· May have experience with electronic production life (PLM), enterprise resource planning tools (SAP) and etc.

· May have experience with statistical analysis packages, eg, JMP, Minitab.

· Must be detailed oriented, well organized and able to work independently and in teams.

· Good communication and collaboration skills

· Ability to travel as needed

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills

· Good understanding of FDA regulatory environment (CFR 820), 501k and ISO 13485 strongly preferred.

· Experience in medical device/ pharmaceutical/ IVD is preferred.

· Typically requires a Bachelor’s Degree in Engineering, Life Sciences, or related field with 0-3 years of experience

About SHOKZ

As the first bone conduction headset manufacturer in China, Shokz pioneered the foray into patented bone

conduction technology and has built itself as a world-renowned headphone brand with its signature open-ear

design. Utilising numerous patented acoustics and health technologies in areas like bone conduction and other

related acoustic technology, Shokz aims to accelerate the development of their True Wireless Stereo (“TWS”)

series and their bone-conduction hearing aid product line.

Job Scope:

1. Work as a market quality representative in Southeast Asia (Singapore, Malaysia, Thailand, etc.), collecting

quality information of client products (terminal products and POP display racks) through business trips and store

inspections, listing problem points and promoting internal improvement within the company, enhancing user

experience and satisfaction

2. Research the market return data and trends. Establish a product return model to measure the quality level of

the product market, and decompose responsibility for quality issues to each business unit based on physical

analysis to identify improvement opportunities

3. Bridge the gap between consumers and SHOKZ, dive deep into local stores and after-sales processes, identify

improvement & risk points, and promote SHOKZ's development

4. Other assigned tasks.

Job Requirement：

1. Bachelor's degree or above, majoring in science and engineering

2. Having excellent teamwork and communication coordination skills, having strong self motivation, able to flexibly respond to

changes

3. Located in a subsidiary in Singapore, required frequent business trips to Malaysia, Thailand, Japan, South Korea, and other

countries

5. Passionate about learning and sports.

SHOKZ (SINGAPORE) PTE. LTD.

Contact Person：Leon Li（HR Manager）

Email：[email protected]

Offcial Website：http://shokz.com

The successful candidate will be:

• Assisting in business development activities to build a steady pipeline of opportunities and wins
• Planning and executing the day-to-day activities of IT audit and data assurance engagements for a variety of clients
• Evaluating the design and effectiveness of IT controls, IT governance practices supporting the client’s business and operations and data quality of the client’s systems
• Identifying and communicating value adding recommendations on IT risk management issues and performance improvement opportunities to clients
• Identify, sell / cross-sell and deliver IT and cyber related opportunities such as cyber assurance and attestation (SOC 1/2/3), project assurance, IT policy and governance reviews, emerging technology risks
• Coaching, mentoring and providing guidance to staff on career and personal development
• Having opportunities to broaden own development and greater exposure to relevant services within the Assurance and Risk Consulting Team

The ideal candidate should:

• Possess a recognised degree in a Technology related field, such as Information Technology, Accountancy/Commerce/Business with a major in Information Systems, Computer Science, or Engineering (Electronics/Computer)
• Have minimum 3 years of experience in SAP/ERP audit work, including IT controls testing and data assurance work
• Other relevant certifications such as CISA will be advantageous have knowledge of the systems development lifecycle, information security, and IT management
• Have good communication, analytical and problem-solving skills as well as the ability to work independently and in a team environment
• Possess strong project and client management abilities
• Be willing to travel locally or regionally
• Possess excellent written and oral communication skills with the ability to present ideas and results to technical and non-technical audiences, which include audit committees and senior management
• Be innovative and resourceful with strong interpersonal, organisational, presentation and report writing skills, have a naturally inquisitive mind and be able to think “outside the box”

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

JD:

Should have at least 3 years of experience as a Quality Assurance/ Tester or equivalent

position and the following skill sets:

a) Bachelor’s degree in computer science, Computer or Electronics

Engineering, Information Technology or related disciplines would be

preferred;

b) Certified Software Testing Professional and/or Certified Software Quality

Analyst will be an added advantage;

c) Strong analytical skills, meticulous attention to details, good interpersonal

skills such as tactfulness, good presentation and listening skills;

d) Experience in the following would be advantageous:

i. Automated testing tools such as Tricentis TOSCA; and

ii. Testing for government public services.

e) Good written and verbal communication and presentation skills, able to

interact professionally with all levels of the organisation.

Roles & Responsibilities:

a) Understand and document business processes, workflow and user story;

b) Perform checks under both functional and non-functional scopes of testing;

c) Review, develop and align test plan, test cases, scenarios and strategies,

ensure adherence to quality standards;

d) Perform manual and automated testing using Tricentis TOSCA, including

preparing test data when necessary;

e) Develop and maintain automated test scripts;

f) Review, support and participate in functionality and technical testing such as

performance testing, security, interface integration and usability testing;

g) Review test reports and results of the Authority’s appointed contractors for

the Authority’s systems;

h) Collaborate and coordinate with system stakeholders and Authority’s

appointed contractors for testing;

i) Review test process and recommend improvement, which includes analysing

test processes and methodologies, identify area for improvement and

recommend process optimisations and best practices; and

j) Manage test activities and ensure the planned test activities are completed as

scheduled.

What you’ll do

• Manage clinical quality reporting staff through end-to-end clinical quality data ingestion/exchange, storage/maintenance, security, project management, strategic planning, reporting, and analyses.
• Oversee quality and integrity of processes, data, and systems by serving as a subject matter expert on health information technology systems.
• Develop, maintain, and govern an accurate and complete directory of available clinical quality data, resources, reports, dashboards, and analyses.
• Collaborate across the organization to monitor and maintain the plan’s compliance with MOH standards and alternative payment model contractual arrangements.
• Develop and maintain strong collaborative relationships with providers, MOH, health information networks, vendors, and internal population health stakeholders to ensure health data is accurate and complete and outcomes are met related to quality.
• Responsible for team that conducts in-depth analyses to identify gaps in care across all lines of business to assist care coordinators in provider and member outreach for quality improvement.
• Collaborate with auditor, vendors, senior management, ITS, quality management, and other relevant stakeholders to plan for and ensure timely availability of data needed for audits, reports, applications, organizational metrics, and planning.
• Oversee training, processes, and access related to patient records, supplemental data, measures, supporting applications, and educational materials.
• Provide continuous monitoring and goal setting for clinical quality measures and supplemental data to assist in population health initiatives and improved quality metric performance.
• Participate in regular quality meetings with organizational leadership to evaluate metrics and identify and remove barriers to improving quality metrics across all lines of business.

What you need

• Min Bachelor’s degree with major in health informatics, health administration, public health, business administration or related field.
• Requires proven leadership skills and experience.

Bonus if you have

• Post-graduate degree in health informatics, health administration, public health, public administration, or related field.
• Previous project management experience.

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Thank You.

Leon Leong De Cong
R1551708
Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyze and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Bachelor’s degree in computer science, Software Engineering, or a related field (Advanced degrees are a plus).
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis)
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyze and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Bachelor’s degree in computer science, Software Engineering, or a related field (Advanced degrees are a plus).
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis)
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyze and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Bachelor’s degree in computer science, Software Engineering, or a related field (Advanced degrees are a plus).
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis)
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyze and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Bachelor’s degree in computer science, Software Engineering, or a related field (Advanced degrees are a plus).
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis)
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.

Summary

Imagine what you could do here. At Apple, new ideas have a way of becoming extraordinary products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish!I The AppleCare Technologies Quality Engineering has an immediate opening for an Application Quality Engineer to lead advanced testing strategies, introducing innovative QA practices for logistics process flows and partner with freight carriers or third-party logistics providers. Your role is critical in shaping the QA processes, enhancing product quality, and driving the adoption of best practices across the organization. Your technical acumen, leadership through influence, and commitment to quality excellence play a pivotal role in advancing the organization's quality assurance practices in the logistics area and ensuring the delivery of exceptional products.

Description

Are you a passionate and detailed Quality Engineer with expertise in logistics applications? As a key player in our organization, you will be responsible for developing, implementing, and maintaining robust quality assurance processes for SAP EWM, MM, SD, and other logistics systems. Your expertise will involve ensuring thorough test script coverage, facilitating collaboration between cross-functional teams, and analyzing logistics processes to identify improvement opportunities. You will collaborate closely with business stakeholders to align quality objectives and drive business value. Using SAP modules, you will monitor logistics operations, analyze quality metrics, and conduct risk assessments. You will also provide training and support to business users, mentor junior quality engineers, and create comprehensive documentation. With a proven track record in quality assurance and a deep understanding of logistics operations, you will be instrumental in enhancing our customer satisfaction and driving business growth.

Minimum Qualifications

• Extensive experience in quality engineering, within a logistics environment.
• Knowledge of quality management systems, tools, and methodologies
• Ability to work effectively in a cross-functional team environment.

Preferred Qualifications

• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• SAP functional experience in EWM or MM, and experience migrating from SAP R/3 to SAP S/4 HANA.