Job Descriptions :

• Leadership and Coordination: Spearhead the delivery of Quality work scopes ensuring seamless coordination among stakeholders and compliance with applicable requirements. You’ll work alongside functions such as Package Mgmt, H&S, Engineering, Construction, Supply & Expediting, Commissioning, Project Controls, Contract Management, Legal, and Procurement.
• Quality Management: Drive project to completion on time, within budget, and to the highest quality and HSE standards. Develop and maintain project Quality schedules, budgets, and forecasts, contributing directly to Company’s Renewable strategy. Ensure compliance to Project Quality requirements are met.
• Design and execute a comprehensive strategy that integrates quality management with sustainability goals to support growth objectives
• Supervise, coach and engage the Quality team to strive for excellence, to deliver solutions that meet high-level quality standards
• Continuously improve customer satisfaction by handling customer complaints promptly and professionally
• Ensure products meet quality standards before reaching customers.
• Oversee all new product development procedures, ensuring that sustainability considerations and internal controls are integrated from the beginning.
• Risk Management: Effectively manage project risks, specifically those intrinsic to the offshore wind industry, manufacturing, Quality Assurance/Quality Control, and supply chain challenges.
• Ensure that the lessons learned are effectively captured and communicated during the project
• Expected to travel to Batam to monitor and control the construction progress and customer meetings.

Job Requirements :

• Bachelor’s degree or higher in Engineering, Mechanical Engineering, or a related field.
• 5-8 years of experience managing quality of Shipyard and installation. Experience in Quality Assurance and Quality Control for onshore / offshore wind projects, preferably specific to Offshore substation construction
• Proven success in quality and process management, with a track record in quality control and continuous improvement.
• In-depth knowledge of Quality Management Practices and standards such as ISO, APQP, PPAP, FMEA, MSA, REACH, ROHS.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD. 19C9772 67026282

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Key Responsibilities

The successful incumbent will support the QA Manager in the following responsibilities.

• Ensure compliance with the Company’s food safety management system, QA standards, customer requirements, certification audits, and regulations for quality and food safety control processes.
• Support the Quality Assurance Manager (QAM) in preparing external and internal audits according to customer standards/contract requirements, and drive cross-functional teams to achieve targeted performance.
• Conduct site inspections to promote continuous improvement and adherence to Standard Operating Procedures (SOPs), hygiene, and food safety practices.
• Manage QA random sampling and microbiological testing for food samples, raw materials, water & ice, hand swabs, and Environmental Monitoring Program (EMP).
• Analyze data and follow up on unsatisfactory test results to identify potential causes of failure, recommend corrective actions for process improvement, and prevent recurrence.
• Prepare documentation related to all export matters in the capacity of Quality Person (QP).
• Develop training materials and conduct food safety trainings for operational staff.
• Review new product artwork to ensure regulatory compliance.
• Assist QAM in food safety incident management, including site investigations, testing, and preparation of incident reports.
• Support QAM in maintaining the ISO 22000/HACCP manual and QA documentation.
• Assist in the supplier approval program (supplier assessment/documentation review).
• Contribute to QA work plans and initiatives aimed at improving QA processes and food safety standards.
• Support Group QA, annual emergency exercises, and ad-hoc catering events as required.

Key Requirements

• Minimum Degree in Food Science/ Technology or other relevant fields.
• Minimum 2 year of QA experience in the food industry.
• Passionate in upholding food safety and possess good knowledge of Food Regulations, SFA requirements, GMP, and food safety management certifications (e.g., HACCP, ISO 22000, GFSI standards).
• Keen learning attitude, proactive, and decisive.
• Detail-oriented and meticulous with competency in report writing and presentation skills.
• Independent, committed and possess strong interpersonal communication skills
• Ability to multi task, handle stress in a fast-paced environment, and meet tight deadlines.
• Excellent interpersonal and communication skills.
• Collaborative and able to work effectively in a team.
• Must be comfortable working in a cold environment.

Job Description

• Provides support on quality systems, processes, and procedures to ensure compliance with FM Contract, Company’s, and ISO policies.
• Responsible for preparing and conducting quality control checks, investigations for potential quality non-conformance, compliance concerns and recommend follow-up actions to mitigate such issues on Building Facilities including M&E Systems, Building Systems and soft services.
• Prepare report for management review and facilitate for follow-up actions required.
• Attend regular maintenance meetings on behalf of the Company with Clients and Clients’ Representatives.
• Lead the internal audit program for operation site include identifying opportunities for quality systems’ improvements and meet company’s quality objectives.
• Maintain good records and filing systems of reports for future reference and coordination

Job Requirement

• At least 3-5 years relevant working experience in Engineering, Facilities or Estates Management, Quality Management Systems, Quality Control or equivalent.
• Minimally Diploma in any Engineering field, Facilities or Estates Management or equivalent with knowledge in ISO Standards 9001, 14001 and/or 41001.
• Certified QMS Auditor / Lead Auditor in ISO or equivalent will be advantageous.
• Pro-active, independent yet service and team-oriented, and able to perform under pressure with minimal supervision.
• Strong interpersonal and communication skills with ability to work cross-functionally with different departments to meet timeline and objectives.
• Location is at Singapore Polytechnic
• 5.5 work day

Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

Need to know Zeiss CMM Program

Need to Know Zeiss CMM Operation

Have Quality Assuarnce & Quality Control Knowledge

Know incoming / In-process / External provider parts insepection

Know prepare of quality documentation and maintenance documents like daliy Monitoring Data and Monthly Data performance

Will preapare of documentation for customer audit and ISO audit

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Purpose:

• To be responsible for managing the interactions with third party organisations that supply QA incoming materials and/or services to GSK.
• To manage material release for incoming materials, supplier change notifications and new material management.
• To provide Quality oversight to logistics management and warehouse operations.

Key Responsibilities:

Supplier Management

• Provide QA oversight of Supplier management activities on site to achieve compliance with company policies and government regulations as assigned.
• To participate (Executive 1) and to represent the site (Executive 2) for Supplier Management business processes to drive improvements and share best practises across the GSK Vaccines network.
• Process owner/support supplier complaint process for QA incoming materials. Lodge supplier complaints and ensure suppliers identify the root cause and associated CAPA's to prevent recurrence of supplier quality issues.
• Review and track supplier-related CAPA for timely closure.
• Maintain inspection readiness, conduct supplier assessments for both new and current service providers in a timely manner.
• Maintain the approved supplier listing and audit schedule in a state of compliance and accuracy.
• Assess supplier change notifications in a timely manner and escalate where necessary especially in situations with supply impact.
• Initiate and review deviations/change control/CAPA associated with incoming material.

Executive 1: Minor deviations and CAPA

Executive 2: Minor, major deviations and CAPA

• Work closely with site user and Global stakeholders for Supplier management related matters

QA Raw Material Release and Warehouse oversight

• Support incoming material documentation review and release to recommend and confirm Usage Decision (UD) of raw material
• Ensure that material document file (MDF) is complete and accurate before disposition of material in SAP
• Ensure that system is in place for filing and archival of MDF
• Initiate and review deviations/change control/CAPA associated with incoming material releases.
• Ensure that all deviations/change controls are closed or assessed for impact on the release of the material prior to release the QA-controlled incoming material
• Provide QA oversight to warehouse such as attending warehouse tier, conduction GEMBAs, inspection readiness and warehouse related deviations, CAPAs and change control

Decision Making:

Proposals & Recommendations

• Propose improvements to work processes, with basic awareness of business requirements.
• Deviation investigations and assessments
• In addition for QA Executive 2:
• Able to provide QA oversight on routine situations independently and complex situations with supervision (deviations, changes, system issues, compliance matters)
• Able to manage simple department projects (e.g. continuous improvement) with supervision
• Greater awareness of business requirements and to highlight considerations where there is a need for escalation

Skills:

Professional

• At least University basic degree in a Science or Engineering discipline

Technical

• A good understanding of cGMP regulatory and legal requirements as applied to quality assurance of pharmaceuticals manufacturing
• User experiance with SAP will be prefered
• Ability in handling and organizing multiple workflows

Business

• Ability to apply optimal quality assurance standards to promote a business edge
• Ability to facilitate business activities commpatible to international regulatory environment
• Ability to communicate effectively within the site organization and across the network

Competencies:

• Working knowledge of FDA/EU/ICH/WHO as well as all other relevant reuglatory and technical guidelines
• Possess Analytical and Quality performance mindset
• Demonstrate professional & ethical integrity
• Fluency in the English language
• Demonstrates sense of urgency
• Ability to work both as an individual contributor and as a team player.

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

Job Description & Requirements

Able to operate CNC CMM machine with 2 years experience needed is a priority.

Knowledge in QC equipments, example: Height Gauge, Smart Scope, Veriner caliper etc.

With computor knowledge to provide QC report and handle NCR.

Must have knowledge in drawing specification. Example: Tolerance, Surface Treat, Heat Treat etc.

Basic knowledge in machining process.

Job description

Non-Destructive Testing (NDT) technicians examine structures,vehicles, and products for flaws and structural weaknesses usingnon-destructive testing techniques. They conduct material tests,interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering,or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound,infrared, and radiographic.

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

KEY DUTIES AND RESPONSIBILITES:

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.

1. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
2. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
3. Ensure readiness of QC Laboratory in internal / external audits.
4. Maintain data integrity in Quality Control activities and ensure appropriate traceability.

6. Initiate change control documents.

1. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
2. Participate in New Product Introduction activities.

9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.

1. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
2. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
3. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
4. Escalate the quality events, trends as appropriate to QC Head.
5. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
6. Serve as subject matter expert on laboratory instrumentation and compliance issues.
7. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
8. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
9. Maintains a safe laboratory environment by implementing recommendations made by EHS.
10. Initiate CAPEX for equipment purchases.

20. Support in budget preparation for QC Laboratory.

21. Any other activities as and when assigned by the Superior.

JOB REQUIREMENTS:

· EDUCATION: Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

· EXPERIENCE: Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

• Possess working knowledge of GMP in the pharmaceutical industry.
• Excellent interpersonal and analytical skills, good verbal, and written communication skills.
• Working knowledge of qualification, calibration, and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• Working knowledge of method development, validation, verification of analytical method.
• Familiarity of 21 CFR Part 11 requirements.

• Manage end-to-end quality control of incoming raw material, in-process monitoring and final inspection of outgoing products involving organoleptic, physical, chemical and microbiological analysis

• Conducts drinking water quality inspection and test monitoring from water treatment process to bottling process

• Conducts daily hygiene and factory housekeeping inspection including production floor, raw material storage and warehouse facility

• Maintains laboratory inventory, equipment tool calibration and maintenance • Perform monthly verification of pest control inspection and documentation

• Handle all new applications and renewal of quality standard certification in compliance to SFA (Singapore Food Agency), FSSC 22000, ISO 22000 Food Safety Management System, HACCP and Halal

• Able to conduct internal factory audits, annual ISO certification, surveillance audits and customer related inspections

• Handles external laboratory testing of source water and product drinking water in compliance to SFA standards

• Manage and investigate product complaints by customers and ensure closure in accordance with company guidelines and external regulatory requirements

• Manage risk-management procedures and report recurring issues to management and product development

• Oversees quality management compliance, customer quality index and quality control operations

• Conducts annual management review on quality system involving quality performance index, plans and improvements

• Provide training and support to relevant team on systems, policies, procedures and core processes

• Any other duties assigned by Superior

Requirement:

• Proven working experience as a QC / QA in Food Factory for minimum of 3 years

• Diploma / Degree preferred. Advantage for candidates with Certifications such as Quality Auditor, Quality Engineer, Quality Improvement Associate and Six Sigma

• Quality inspection, auditing and testing experience

• Highly motivated, self-driven and able to work in a team

• Meticulous, Independent with good communication skills, interpersonal and leadership capabilities

• Problem solver with a strong analytical mindset

• Able to multi-task

• Experience with implementation of corrective action programs

• Strong computer skills including Microsoft Office, QA applications and databases

• Knowledge & experience of data analysis tools, concepts and methodologies of QA

• Knowledge of relevant regulatory requirements

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• To understand quality requirements and standards and verify conformance in production line.
• To analyse audit findings to minimise process non-conformances in the production line.
• To accurately record and communicate observations from audit/inspection to affected parties and team.
• To inspect sub-assemblies and finished product, both visually and functionally.
• To work in factory environment, which will involve walking around with appropriate attire and safety PPE.
• To observe required factory and safety rules, when performing daily duties.
• To provide accurate reports to engineers and managers on a timely basis.
• To provide suggestions for improvements or highlight challenges encountered.

• Minimum ITE certification with at least 1 year of experience.
• Proficient in Microsoft Excel, Word, PowerPoint, and Outlook.
• Able to work independently with minimal supervision.
• Willing to learn new skills, with passion for quality.
• Troubleshooting skill knowledge will be an advantage.