Job Descriptions:

• Management of CAPA from tracking, including follow-ups and closure.
• Management of Change Control, Deviations, from tracking, follow-ups and closure.
• Review quality process control plan, drive quality issues to root cause, corrective actions and improvements.
• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Coordinate and assists during customer visits and audits.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Review the implementation and efficiency of quality and inspection systems.
• Collect, compile statistical quality data, and analyze data to identify areas for improvement in the quality system.
• Review of analytical reports, and batch records (manufacturing and packaging).
• Perform SAP QM setting, review test results, block / unblock of finished products.
• Manage customer queries, customer satisfaction surveys, and questionnaires and other quality / regulatory purpose documentation requests.
• Investigate customer complaints and non-conformance issues.
• Consolidate data to create the annual product quality review report.
• Track quality performance and initiate quality improvement plans.
• Perform risk assessments and monitor risk management activities at quality level.
• Conduct /perform training to employees to improve GMP / international standards certification awareness and compliance.
• Perform any other duties and responsibilities as assigned from time to time.

Job Requirements:

• Minimum 3 years related work experience
• Possess experience in internal audit, validation activities, training management and batch release for API with good background on cGMP

Our company is looking for a Quality Assurance / Management Representative who will perform the following tasks:

• Manage the company's ISO9001:2015 and ISO45001:2018 systems by leading both internal and external audits.
• Monitor and analyze the company's quality and safety performance through the action plans in place.
• Keep abreast of the government requirements as well updates on the standards to ensure compliance of the company's systems and policies.
• Ensure that all statutory licenses, certificates, and inspections of the company's equipment and machinery are valid and up to date.
• Manage and monitor the company's measuring equipment and devices to ensure that they are calibrated as per the required standard of the products.
• Liaise with all external stakeholders such as government bodies (MOM, BCA, SCDF, etc) with regards to company's operation and compliance.
• Communicate with existing customers on their regular audits, non disclosure agreements, and additional requirements which may affect the company's status of being an approved vendor.
• Assist project engineers in securing Certificate of Origin (COO) and / or Preferential Certificate of Origin (PCO) for products.
• Analyze the applicable tariff to be applied for free trade agreement (FTA) purposes.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Job Descriptions :

• Leadership and Coordination: Spearhead the delivery of Quality work scopes ensuring seamless coordination among stakeholders and compliance with applicable requirements. You’ll work alongside functions such as Package Mgmt, H&S, Engineering, Construction, Supply & Expediting, Commissioning, Project Controls, Contract Management, Legal, and Procurement.
• Quality Management: Drive project to completion on time, within budget, and to the highest quality and HSE standards. Develop and maintain project Quality schedules, budgets, and forecasts, contributing directly to Company’s Renewable strategy. Ensure compliance to Project Quality requirements are met.
• Design and execute a comprehensive strategy that integrates quality management with sustainability goals to support growth objectives
• Supervise, coach and engage the Quality team to strive for excellence, to deliver solutions that meet high-level quality standards
• Continuously improve customer satisfaction by handling customer complaints promptly and professionally
• Ensure products meet quality standards before reaching customers.
• Oversee all new product development procedures, ensuring that sustainability considerations and internal controls are integrated from the beginning.
• Risk Management: Effectively manage project risks, specifically those intrinsic to the offshore wind industry, manufacturing, Quality Assurance/Quality Control, and supply chain challenges.
• Ensure that the lessons learned are effectively captured and communicated during the project
• Expected to travel to Batam to monitor and control the construction progress and customer meetings.

Job Requirements :

• Bachelor’s degree or higher in Engineering, Mechanical Engineering, or a related field.
• 5-8 years of experience managing quality of Shipyard and installation. Experience in Quality Assurance and Quality Control for onshore / offshore wind projects, preferably specific to Offshore substation construction
• Proven success in quality and process management, with a track record in quality control and continuous improvement.
• In-depth knowledge of Quality Management Practices and standards such as ISO, APQP, PPAP, FMEA, MSA, REACH, ROHS.

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Key Responsibilities

The successful incumbent will support the QA Manager in the following responsibilities.

• Ensure compliance with the Company’s food safety management system, QA standards, customer requirements, certification audits, and regulations for quality and food safety control processes.
• Support the Quality Assurance Manager (QAM) in preparing external and internal audits according to customer standards/contract requirements, and drive cross-functional teams to achieve targeted performance.
• Conduct site inspections to promote continuous improvement and adherence to Standard Operating Procedures (SOPs), hygiene, and food safety practices.
• Manage QA random sampling and microbiological testing for food samples, raw materials, water & ice, hand swabs, and Environmental Monitoring Program (EMP).
• Analyze data and follow up on unsatisfactory test results to identify potential causes of failure, recommend corrective actions for process improvement, and prevent recurrence.
• Prepare documentation related to all export matters in the capacity of Quality Person (QP).
• Develop training materials and conduct food safety trainings for operational staff.
• Review new product artwork to ensure regulatory compliance.
• Assist QAM in food safety incident management, including site investigations, testing, and preparation of incident reports.
• Support QAM in maintaining the ISO 22000/HACCP manual and QA documentation.
• Assist in the supplier approval program (supplier assessment/documentation review).
• Contribute to QA work plans and initiatives aimed at improving QA processes and food safety standards.
• Support Group QA, annual emergency exercises, and ad-hoc catering events as required.

Key Requirements

• Minimum Degree in Food Science/ Technology or other relevant fields.
• Minimum 2 year of QA experience in the food industry.
• Passionate in upholding food safety and possess good knowledge of Food Regulations, SFA requirements, GMP, and food safety management certifications (e.g., HACCP, ISO 22000, GFSI standards).
• Keen learning attitude, proactive, and decisive.
• Detail-oriented and meticulous with competency in report writing and presentation skills.
• Independent, committed and possess strong interpersonal communication skills
• Ability to multi task, handle stress in a fast-paced environment, and meet tight deadlines.
• Excellent interpersonal and communication skills.
• Collaborative and able to work effectively in a team.
• Must be comfortable working in a cold environment.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD. 19C9772 67026282

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description

• Provides support on quality systems, processes, and procedures to ensure compliance with FM Contract, Company’s, and ISO policies.
• Responsible for preparing and conducting quality control checks, investigations for potential quality non-conformance, compliance concerns and recommend follow-up actions to mitigate such issues on Building Facilities including M&E Systems, Building Systems and soft services.
• Prepare report for management review and facilitate for follow-up actions required.
• Attend regular maintenance meetings on behalf of the Company with Clients and Clients’ Representatives.
• Lead the internal audit program for operation site include identifying opportunities for quality systems’ improvements and meet company’s quality objectives.
• Maintain good records and filing systems of reports for future reference and coordination

Job Requirement

• At least 3-5 years relevant working experience in Engineering, Facilities or Estates Management, Quality Management Systems, Quality Control or equivalent.
• Minimally Diploma in any Engineering field, Facilities or Estates Management or equivalent with knowledge in ISO Standards 9001, 14001 and/or 41001.
• Certified QMS Auditor / Lead Auditor in ISO or equivalent will be advantageous.
• Pro-active, independent yet service and team-oriented, and able to perform under pressure with minimal supervision.
• Strong interpersonal and communication skills with ability to work cross-functionally with different departments to meet timeline and objectives.
• Location is at Singapore Polytechnic
• 5.5 work day

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Purpose:

• To be responsible for managing the interactions with third party organisations that supply QA incoming materials and/or services to GSK.
• To manage material release for incoming materials, supplier change notifications and new material management.
• To provide Quality oversight to logistics management and warehouse operations.

Key Responsibilities:

Supplier Management

• Provide QA oversight of Supplier management activities on site to achieve compliance with company policies and government regulations as assigned.
• To participate (Executive 1) and to represent the site (Executive 2) for Supplier Management business processes to drive improvements and share best practises across the GSK Vaccines network.
• Process owner/support supplier complaint process for QA incoming materials. Lodge supplier complaints and ensure suppliers identify the root cause and associated CAPA's to prevent recurrence of supplier quality issues.
• Review and track supplier-related CAPA for timely closure.
• Maintain inspection readiness, conduct supplier assessments for both new and current service providers in a timely manner.
• Maintain the approved supplier listing and audit schedule in a state of compliance and accuracy.
• Assess supplier change notifications in a timely manner and escalate where necessary especially in situations with supply impact.
• Initiate and review deviations/change control/CAPA associated with incoming material.

Executive 1: Minor deviations and CAPA

Executive 2: Minor, major deviations and CAPA

• Work closely with site user and Global stakeholders for Supplier management related matters

QA Raw Material Release and Warehouse oversight

• Support incoming material documentation review and release to recommend and confirm Usage Decision (UD) of raw material
• Ensure that material document file (MDF) is complete and accurate before disposition of material in SAP
• Ensure that system is in place for filing and archival of MDF
• Initiate and review deviations/change control/CAPA associated with incoming material releases.
• Ensure that all deviations/change controls are closed or assessed for impact on the release of the material prior to release the QA-controlled incoming material
• Provide QA oversight to warehouse such as attending warehouse tier, conduction GEMBAs, inspection readiness and warehouse related deviations, CAPAs and change control

Decision Making:

Proposals & Recommendations

• Propose improvements to work processes, with basic awareness of business requirements.
• Deviation investigations and assessments
• In addition for QA Executive 2:
• Able to provide QA oversight on routine situations independently and complex situations with supervision (deviations, changes, system issues, compliance matters)
• Able to manage simple department projects (e.g. continuous improvement) with supervision
• Greater awareness of business requirements and to highlight considerations where there is a need for escalation

Skills:

Professional

• At least University basic degree in a Science or Engineering discipline

Technical

• A good understanding of cGMP regulatory and legal requirements as applied to quality assurance of pharmaceuticals manufacturing
• User experiance with SAP will be prefered
• Ability in handling and organizing multiple workflows

Business

• Ability to apply optimal quality assurance standards to promote a business edge
• Ability to facilitate business activities commpatible to international regulatory environment
• Ability to communicate effectively within the site organization and across the network

Competencies:

• Working knowledge of FDA/EU/ICH/WHO as well as all other relevant reuglatory and technical guidelines
• Possess Analytical and Quality performance mindset
• Demonstrate professional & ethical integrity
• Fluency in the English language
• Demonstrates sense of urgency
• Ability to work both as an individual contributor and as a team player.

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To manage QC equipment life cycle from qualification to decommissioning including calibration and maintenance plan follow up

Key Responsibilities:

• Technical responsibilities
• Manage new QC equipment qualification as per change control and validation processes (i.e. URS, System classification, Audit trail review assessment, DQ/IQ/OQ, PPC09)
• Be author of SOPs/ protocols/ reports/ training materials
• Manage decomissioning of QC equipment and follow disposal
• process
• Maintain our QC asset listing up to date Follow QC equipment routine lifecycle
• Coordination of calibration and maintenance plan with user and external vendor/TS team
• Coordination of equipment troubleshooting if occurence of failure/breakdow (i.e. Tag in/out equipment, Work order creation)
• Sample transfer, alarm management and cleaning for fridges, freezers and incubators
• Liaise with external vendor for service quotation, escort vendor during service and approve invoice timely
• Supports compliance activities:
• Performs regular Ll audits in QC
• Coordinates and supports all L2, L3 and L4 audits and the associated CAPAs
• Lead and manage continuous improvement projects Subject-matter-expert (SME)/ audit fronter for assigned topics
• Manage ad-hoc tasks
• Organization and Management Responsibilities
• Creates strong team morale and a culture of accountability and ownership
• Provides leadership, guidance and technical expertise/support to the juniors
• Ensures continuous improvements of the QC operations
• Ensures expenditures are within budget
• Decision Making
• Proposals & Recommendations
• Based on experience & knowledge of work
• Proposal of CAPA for any issues/ deviations/ exceptions/ risks
• Proposal of QC improvement projects and strategies
• Team training and development

Skills:

Professional

• For Specialist - University Degree in a relevant Science discipline with at least 2 years of working experience or Diploma with at least 5 years of working experience
• For Senior Specialist - University Degree in a relevant Science discipline with at least 4 years of working experience or Diploma with at least 8 years of working experience

Technical

• Competent technical skills in project management
• Computer system validation Knowledge of cGLP & cGMP

Business

• Effective report writing skills
• Planning and Organizing skills
• Good interpersonal and communication skills
• Effective team player
• Analytical skills with logical thinking Problem solving skills

Competencies:

• Effective report writing skills
• Planning and organization skills
• Able to work independently
• Team player
• Analytical skills with logical thinking
• Leadership skills (advantage)
  ​​

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

Need to know Zeiss CMM Program

Need to Know Zeiss CMM Operation

Have Quality Assuarnce & Quality Control Knowledge

Know incoming / In-process / External provider parts insepection

Know prepare of quality documentation and maintenance documents like daliy Monitoring Data and Monthly Data performance

Will preapare of documentation for customer audit and ISO audit

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to join our team. The successful candidate will be responsible for ensuring the quality of low voltage switchboard panels to meet industry standards and client requirements. This role requires a strong understanding of electrical systems, testing procedures, and quality assurance.

Key Responsibilities:

• Conduct comprehensive testing of low voltage switchboard panels, including insulation resistance tests, contact resistance tests, high voltage tests and function tests.
• Perform inspections and audits of electromechanical assemblies to ensure compliance with applicable standards and specifications.
• Document test results and prepare detailed reports for internal and client review.
• Collaborate with design and manufacturing teams to identify and resolve any issues or discrepancies.
• Ensure all testing equipment is calibrated and maintained in good working condition.
• Participate in continuous improvement initiatives to enhance testing processes and procedures.
• Train production staff on quality control processes and provide guidance on quality-related matters.
• Stay updated with industry standards and advancements in testing methodologies.
• Ensure the quality of products meets the required standards and specifications.
• Support onsite testing, FAT, SAT and troubleshooting activities, if necessary.

Qualifications:

• Minimum Diploma in Electrical Engineering or a related field.
• Minimum of 2 years of experience in testing low voltage switchboard panels or similar electrical equipment.
• Strong knowledge of electrical testing procedures and standards (e.g., IEC 61439).
• Proficiency in using testing equipment and tools.
• Excellent analytical and problem-solving skills.
• Strong attention to detail and accuracy.
• Good communication and teamwork skills.
• Ability to work independently and manage multiple tasks effectively.

Preferred Qualifications:

Certification in electrical testing or quality control.

Main duties and responsibilities :

1. Incoming QA(IQA) and Outgoing QA (OQA) Inspection
2. Quality Wall (QW) buy off
3. Weekly process audit
4. Non Conformance Material Report (NCMR)

Experience and knowledge :

1. Min "O” level with 3 years of related experiences in a manufacturing environment.
2. Knowledge of Microsoft (words, excel and ppt) is a must.
3. Knowledge of Stamping, Plating, Molding and Connector Assembly is an added essential.

Skill Required :

1. Good knowledge on measurement methodology and equipment (profile projector, TM scope, OGP smart scope).
2. Exposure in Process and QMS Audit.
3. Knowledge of Quality tools such as SPC and 7 QC tools.
4. Good interpretation of product drawing, specification and Inspection Plan.

Job Requirement :

1. Able to work independently
2. Able to work rotation shift

Job description

Non-Destructive Testing (NDT) technicians examine structures,vehicles, and products for flaws and structural weaknesses usingnon-destructive testing techniques. They conduct material tests,interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering,or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound,infrared, and radiographic.

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

Job Description & Requirements

Able to operate CNC CMM machine with 2 years experience needed is a priority.

Knowledge in QC equipments, example: Height Gauge, Smart Scope, Veriner caliper etc.

With computor knowledge to provide QC report and handle NCR.

Must have knowledge in drawing specification. Example: Tolerance, Surface Treat, Heat Treat etc.

Basic knowledge in machining process.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To manage logistic activities within QC department

Key Responsibilities:

• Performs receipt and storage of sample in accordance to local procedure.
• Performs routine and non-routine sampling of raw materials and utilities with observation of GMP requirements
• Ensures proper packaging of samples and correct samples are shipped to offsite recipient timely
• Ensures a good inventory of QC materials (purchased and prepared materials/glassware) to support testings; ensures no over surplus of inventory
• Ensures wastes are disposed appropriately and promptly.
• Practices 6S and ensures good housekeeping of laboratory, work area and equipments.
• Supports equipment calibration and maintenance, performs autoclave requalification and washing machine verification
• Performs peer review for verification of task and data.
• Participates in laboratory investigation (when required) and assist in the timely closure investigations, CAPAs.
• Ensures proper archival of submitted document for easy retrieval
• Identifies and reports problems in QC to supervisor in a timely manner.
• Adheres to all safety and security policies and practises
• Manages ad-hoc support tasks
• Assist QC support manager in the management and operations of the team
• Scheduling day-to-day shopfloor activities and resources handling to ensure timely sample and material management Provides training to the team
• Provide guidance, support, and technical expertise to the team Involves in investigation and protocol and report writing (when required).
• Involves in SOP writing and updating.
• Organization and Management Responsibilities
• Creates strong team morale and a culture of accountability and ownership
• Provides leadership, guidance and technical expertise/support to the juniors
• Ensures continuous improvements of the QC operations
• Ensures expenditures are within budget

Skills:

Professional

• For QC Support Technologist - Fresh graduate of NITEC, Diploma in Science (or equivalent)
• For Senior QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 4 years of experience/Degree holder with at least 2 years of working experience.
• For Lead QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 8 years of experience/Degree holder with at least 4 years of working experience.

Technical

• Competent technical skills in good laboratory knowledge and hands on experience in inventory management
• Knowledge of cGLP & cGMP

Business

• For QC Support Technologist, Senior QC Support Technologist 1, 2
• Basic report writing skills (preferably with legible hanwriting)
• Basic planning and organizing skills (for individual time management and work planning) Good interpersonal skills
• Team player
• For Senior QC Support Technologist 3 and Lead
• Effective report writing skills
• Planning and organizing skills (for individual time management and work planning)
• Leadership and problem solving with analytical and logical thinking

Competencies:

• Effective report writing skills
• Planning and organization skills
• Able to work independently
• Team player
• Analytical skills with logical thinking

​​

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.