Job Responsibilities

• Design, develop and implement software solutions for Building Management System (BMS) including chiller systems, HVAC, security, fire alarm and etc
• Design P&ID diagram
• Collaborate with engineering team to gather requirements and specification of BMS
• Write, debug and test the code to control and integrate with the existing BMS system
• Monitor, troubleshoot and resolve the BMS related issues
• Develop and maintai manuals of the developed BMS system including codes, logic diagrams and system configurations
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Bachelor degree in Mechanical, Electrical, or Energy-related Engineering with 5 to 10 years of experience in the development of BMS for chiller plants
• Proven track record in leading a technical team in the successful delivery of projects
• Strong technical skills and knowledge of industry best practices, standards, and regulations related to cooling, solar, and electric vehicle charging technologies
• Excellent communication skills, both written and verbal, with the ability to present technical information to non-technical stakeholders
• Possess the ability to use data insights to drive system performance improvements

Job Responsibilities

• Assist in (i) the design and development of software solutions for Building Managment System (BMS) including chiller systems, HVAC, security, fire alarm and etc, (ii) preparation of P&ID diagram related to the chiller system and its BMS, and (iii) In writing, debugging and testing of the code to control and integrate with the existing BMS system
• Collaborate with engineering team to gather requirements and specification of BMS
• Develop and maintain manuals of the developed BMS system including codes, logic diagrams and system configurations
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Bachelor's degree in Mechanical, Electrical, or Energy-related Engineering with at least 5 years of experience in the development of BMS for chiller plants
• Strong technical skills and knowledge of industry best practices
• Excellent communication skills, both written and verbal, with the ability to present technical information to non-technical stakeholders

Job Responsibility: -

- To backup QAM as authorized certifying staff ( CAAS & EASA ) to issue ARC as a single point failure.

- To support QAM to acquire certification CAAC (DKA ), to expand china local market sales and to meet minimal requirements from Airline customers requests to get ISO Certified.

- To support the daily activities

- Update, review QMS documentation to ensure compliance (Quality Manual, procedures, WOI, Instruction, etc )

- Assist during an external audit.

- Assist in analyzing follow up on the external/internal audit findings.

- Issuance / checking/ signing CAAS

- Analyses reject parts, arrange MRB.

- Update ASL, the supplier evaluation result

- Handling supplier or subcontractor audit, SQQ

- Prepare Q Score/ IQC / OQC monthly reports.

- Arrange for materials testing.

- Conduct training for QA staff & inspectors

- Perform Supplier evaluation and assessment.

- Lead in process and procedures continuous improvements and business excellence initiatives

- Maintain audit records and manage/track/follow-up on associated corrective action.

- Reports directly to the Quality assurance Manager and assist him on all QA/QC activities.

Job Requirements: -

• Diploma in Mechanical/Aerospace/Electrical & Electronic Engineering
• Strong communication and leadership skills
• Knowledge of AS 9100 & ISO 9001 quality management system.
• Have at least 3 years’ experience of aviation in the quality department related aviation environment.
• Intermediate information system skill level. ( SAP is an advantage )
• Computer literacy – proficiency in Microsoft excel and words
• Able to read technical drawings
• Able to work with all internal/external parties
• Strong team player
• Self-initiative characters are an advantage ( Self-learning, self motivate and passion in works )

Job Responsibilities:

- Meeting with the IT manager to discuss system needs.

- Designing and installing computer hardware configurations.

- Installing software and networking systems.

- Troubleshooting network and software issues.

- Installing high-level software security systems.

- Training staff on newly installed hardware and software systems

- Fixing hardware, software, and networking issues.

- Responding to general IT request.

- Ensuring security software in kept up to date.

- Filing monthly reports for the IT manager.

Job Requirements :-

- Bachelor’s degree in computer science or a similar field.

- Extensive knowledge of computer hardware systems

- Familiarity with general OS system, Enterprise, programming languages, and office software.

- Knowledge of LAN and wireless networks.

- Ability to project manage

- Good communication skills.

- Ability to troubleshoot complex software and hardware issues.

- Knowledge of database and networking security systems.

We are looking for a hands-on and experienced individual who possess very good knowledge on software development to work on inhouse software products for the company.

To work closely with all the relevant stakeholders to translate the business requirements into effective and efficient software product and solutions.

Job description

    • Responsible for the design and development of desktop applications and backend APIs (RESTful)

    • Participate in requirements analysis and specification.

    • Design, develop new software projects

    • Maintaining and modification of the existing projects code base

    • Integrate software components into a fully functional software system

    • Produce code following best practices and standard using .NET and/or programming languages

    • Optimize the overall design and development of the projects

    • Collaborate and work closely with other development teams and R&D teams.

    • Provide documentation of developed software products.

    • Have a good team spirit, process analysis, problem solving, interpersonal and communication

Skill requirements

·       Candidate should possess at least a Degree in the field of Information Technology, Computer Science or equivalent field

·       Well experienced in back-end API development

·       Experience and strong knowledge of database design and development

·       Experience in system integrations (webservices / interfaces / API)

·       Understanding of Agile methodologies

·       Experience in Cloud Platforms & Services is a plus

·       Programming skill requirements

◦         Languages/tools : C++, C#, Python, Java, ASP dotNET, NodeJS server side, QT/QML

◦         Web : RESTFul API

◦         Database : SQLite, MicrosoftSQL, NoSQL (eg., MongoDB)

◦         IDE : Visual Studio, Visual Studio Code, Eclipse, etc

◦         OS : Windows, Linux, Mac

◦         Others : Apache, Git, Test Plans, Test Cases

• Performance Bonus
• Passionate , Energetic and Innovative work culture
• Opportunities for growth and development
• Employee recognition and rewards

Responsibilities

• Coordinate with multiple parties not limited to design consultants/engineers, other departments, clients’ project representatives, statutory / authority agencies, etc. for the establishment of the design deliverables requirements for submission and engineering works.
• Monitor progress, and quality of workmanship and ensure that it complies with authority requirements.
• Highlight any discrepancies and advise the staff on the interfacing of M&E services and the building works.
• Review design deliverables together with the design consultants/engineers and ensure that it is in order for submission.
• Attend technical clarifications as and when required to address technical issues and establish method statements.
• Perform all duties in accordance with company policies, processes, systems, and procedures.

Requirements

• Minimum 2 to 5 years of experience in the construction industry.
• Preferably with a Specialist Diploma in Construction Productivity and above or equivalent.
• Able to work as a team, assertive, independent, and proactive.
• Proficiency in AutoCAD/BIM software is an added advantage.
• 6-day work week.
• Location: Jurong East

Your role is only the beginning

Join NCS and experience a collaborative work environment where you can develop and grow your career through our well-defined career tracks. As part of our Nucleus Graduate Programme, you'll have the opportunity to work on impactful projects with a team that shares your passion for making a difference in the world.

Our comprehensive training, professional coaching, and technical expertise will help you attain a Master of Technology with NUS-ISS or industry-recognized certifications. You'll also have access to multiple 'playgrounds,' such as Project Teams, Client Tribes, Strategy Groups, and Centers-of-Excellence based in Singapore, Shenzhen, and Melbourne. At NCS, we are committed to empowering our people to achieve their fullest potential and create an extraordinary future together.

Are you excited about the opportunity to tackle complex problems and develop solutions that make a real difference in people's lives? Do you thrive in a fast-paced, dynamic environment where you're encouraged to think outside the box? Are you looking to make an impact and contribute to the development of innovative solutions? If you feel any of these describe you, then you might be the one we are looking for!

What will you be expected to do?

• Partner with stakeholders to understand business and system requirements
• Develop and enhance software applications to meet functional and technical specifications
• Continually improve and maintain software applications
• Execute unit, integration, system and user acceptance testing
• Using configuration management, integration and build automation tools to deploy applications
• Identify opportunities and suggest recommendations for system improvement

What should you have:

• Degree in Computer Science or related Engineering fields
• Fresh graduate or less than 2 years of relevant working experience
• Proficiency in one or more frontend framework (HTML5/Angular/React JS)
• Proficiency in one or more backend languages (Java/.NET/Python/PHP)
• Proficiency in database will be an added advantage
• Experience in frontend and backend web application development will be an added advantage

DFI Company Brief 

 DFI Retail Group (the ‘Group’) is a leading pan-Asian retailer. On 31st December 2021, the Group and its associates and joint ventures operated over 10,200 outlets and employed some 230,000 people. The Group had total annual sales in 2021 exceeding US$27 billion. 

The Group provides quality and value to Asian consumers by offering leading brands, a compelling retail experience and great service; all delivered through a strong store network supported by efficient supply chains. 

The Group (including associates and joint ventures) operates under several well-known brands across food, health and beauty, home furnishings, restaurants and other retailing. 

The Group’s parent company, Dairy Farm International Holdings Limited, is incorporated in Bermuda and has a primary listing on the London Stock Exchange, with secondary listings in Bermuda and Singapore. The Group's businesses are managed from Hong Kong by Dairy Farm Management Services Limited through its regional offices. 

 
DFI Retail Group is a member of the Jardine Matheson Group 

Responsibilities: 

• Implement Data SRE best practices to enhance the reliability, availability, and performance of our data infrastructure. 
• Drive data operational excellence by introducing data system observability which includes monitoring, logging, and alerting. 
• Collaborate with cross-functional teams, including data engineering, analytics, and other IT teams to understand data system requirements and deliver effective solutions. 
• Monitor and troubleshoot data-related incidents, working closely with cross-functional teams to ensure quick resolution. 
• Be a champion for Infrastructure as a Code philosophy and drive its adoption. 

• Bring DevOps culture and mindset to the entire data engineering team. 
• Stay informed about emerging technologies and industry trends in data management and SRE. 
   

• Bachelor’s degree in technology, Engineering, or a related field. 
• Preferably 5+ years of DevOps / SRE experience. 
• Experience in maintaining highly scalable system in cloud environment. 
• Good knowledge infrastructure and networking. 
• Experience in building observability platform using tools such as Prometheus & Grafana, ELK stack. 
• Experience in building CI/CD pipelines or platform using tools such as Jenkins, GitHub Actions, Bitbucket Pipeline, etc. 
• Experience in driving Infrastructure as a Code project using tools such as Terraform. 
• Experience in incident response for tech-related incidents 
• Good to have knowledge about end-to-end data engineering workflow and data infrastructure (data lake, data pipelines, data visualisation tools, etc. Huge plus for having experience in working as DevOps for data team. 
• Able to work independently in a fast-paced environment with minimum supervision. 
• Good communication skills including strong written and spoken English. 

Job Description:

• Responsible for IP level and/or SOC level verification.
• Develop verification plan for complex digital IP from design spec, work closely with design engineers to identify important verification scenarios.
• Create verification environment/testbench with Bus Functional Model (BFM) using SystemVerilog, UVM and/or System C.
• Identify and implement functional coverage and SystemVerilog Assertions to catch functional bugs and to boost design quality prior to tape-out.
• Develop directed/use case/random test cases using SystemVerilog, analyse test results, debug tests and improve verification quality.
• Knowing to use Formal verification with SystemVerilog Assertion (SVA) to verify IP block is a plus.

Requirements:

• Bachelor/Master’s degree in Electrical & Electronics/Computer Engineering or equivalent.
• Familiar with AMBA bus protocol (AXI, CHI, ACE, APB).
• Experience with verification methodology such as SystemVerilog, OVM, UVM, SystemC.
• Experience with functional coverage/SVA assertions and test sequence/case writing.
• Experience with the full verification execution cycle.
• Experience in developing measurable verification plan.
• Experience with function verification for common SoC building blocks and verification IP for NOC/Interconnect/Fabric/PCIE, etc. are added advantages.
• Strong problem solver, communicator and team player.
• Scripting skills in Perl, Python, TCL, shell, etc.

This job can be supported by Career Conversion Programmes (CCP).

Will you be part of the extraordinary?

NCS’s mission is to bring people and technology together to make a real impact on communities. As a leading technology services firm, operating across Asia Pacific in over 20 cities, our diverse 12,000-strong workforce delivers large-scale, mission-critical projects for governments and enterprises locally and regionally. Our NEXT capabilities of digital, cloud, platforms as well as our core offerings in Applications, Infrastructure, Engineering, and Cyber Security provide end-to-end technology solutions and services to our clients.

Your role is only the beginning

At NCS, we pride ourselves on empowering our people and talent to their fullest potential. Learning together in our NCS DOJO, we have comprehensive, built-in training and industry standard qualifications that will allow you to up-skill and re-skill as we grow together.

Our Ignite Work-Study Diploma Programme will enable you to kickstart your career and gain valuable hands-on experience while attaining a nationally recognised Diploma.

As a Software Support Engineer, you will gain valuable hands-on experience in the following domain:

Software Engineering

• Automate and enhance business and technical processes to increase productivity seamlessly based on RPA (Robotic Process Automation)
• Participate in discussions with stakeholders to understand business and technical requirements
• Perform end user support – client management
• Perform first-level troubleshooting for client platform related problems and escalate to next level support team if necessary
• Respond promptly to incident, create incident tickets, investigate & provide temporary/permanent resolution of incidents escalated
• Provide timely status updates, reports on SLA, and ticket aging to relevant parties
• Track/monitor tickets for potential SLA breaches, escalate for attention to prevent SLA misses
• Analyse and recommend ways to reduce incident tickets as part of continuous improvement spirit

What should you have:

• ITE Certificate in Computer Science or related IT/Engineering fields
• ITE Graduate with less than two years of relevant working experience
• Positive attitude, eagerness to learn, good team player and highly collaborative

Job Scope:

• Attend User / Client meetings acting as technical lead in regard to project management as required.
• Conduct internal training to staff for pre-sales engagement and ensure knowledge transfer of design methodology, cost modelling, etc. to employees.
• Manage each phase of the project from design to completion and ensure efficient use of resources and enhance cost-effectiveness.
• Supporting new business venture overseas
• Propose design concept.

o Summarize design requirement.

o Analyzing existing facility

o Conceptual sizing/design

• Risk analysis by checking consistency between tender and quotation specification.
• Prepare supplemental material (Spec, DWG) for quotation.
• Review BoQ (Material and quantity)
• Propose Value Engineering and technical review.
• Prepare presentation material for tender interview.
• Provide audit and consultancy services.
• Vigilant system support

o site survey

o draft proposal document

o provide technical support.

• Project Management for new construction and D&B project in design phase working directly with clients, consultants, statutory authorities, and contractors.
• Leading or facilitating the design review meetings and design workshops.
• Feasibility study
• Assessment of mission critical building
• Concept & schematic design

o Summarize design requirement.

o Analyzing existing facility

o Schematic design report

o Design development (Spec., technical calculation sheet)

o Propose new, feasible innovation and stay abreast on the latest trend in the market.

o Product differentiation

• Detail design

o Arrangement of shop drawing with drafter

o Authority submission arrangement with QP

o Input for T&C requirement (prepare test script and ensure that the methodology is in line internally)

o Design Coordination with other discipline.

• Review of construction material / shop drawing / MoS
• Shop drawing coordination with sub-con/vendor & other stakeholders.
• Periodical inspection (internal check for quality improvement)
• Ensure site installation works are accordingly to project plans / designs / time frame.
• T&C consultation for FAT, SAT, and IST with Technical & Q&C department
• Handover submission arrangement with drafter team and project team (As build DWG)
• Required to learn and adopt working in Cloud, Design Collaboration and Model coordination and QA/QC own work.
• AutoCAD & Revit experience with Cloud Work-sharing (ACC) is desirable.
• Depending on project need, this position may be located On-Site or Off-Site and requires frequent travel to the project site.
• Any other duties assigned by Senior Manager

Job Requirements:

• Detail-oriented, sound judgement, organized and flexible
• Displays a high level of responsiveness and follows through on commitments
• Good interpersonal skills and able to interact with all levels, internally and externally, in a professional and responsive manner
• Effectively communicate and work as part of a team, maintaining a professional attitude and collaborating with team members and managers on assigned tasks.

Email to: [email protected]

Requirements for Software Engineer (Devices):

(a) Responsibilities:

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from the definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:

• Requirements gathering;

• Design, development, and maintenance of the software;

• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Documents, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manuals, Training Manual, and other documents as required in the standard adopted by the Authority;

• Assist the Authority with day-to-day application support issues; and

• Liaise with users on the requirements, design, and testing issues.

(b) Qualifications & Requirements:

 Tertiary qualification in Electrical/ Electronics/ Mechanical Engineering/ Computer Science or a relevant discipline

 At least 3 years in software development and system integration

 Experiences in C++ application development in Windows/Embedded platforms

 Knowledge or work experience in the following areas is an added advantage:

➢ Java application development

➢ Web application using HTML/HTML5, JavaScript, and JavaScript Framework (i.e. AngularJS, ExtJS, JQuery, Bootstrap)

➢ Interfacing with database (i.e. MS SQL, Oracle, MySQL) using ODBC/JDBC and SQL

➢ Multi-tier software architecture design and implementation

➢ Object-oriented software design and UML modelling

➢ Virtualization using Containerisation (e.g. docker)

➢ Applications development and deployment into Commercial Cloud (e.g. AWS)

➢ Application development for Desktops / Workstations

➢ Web services in Commercial Cloud (e.g. AWS)

➢ AWS Lambda Functions using Python or JavaScript

➢ Single Sign-on solutions (e.g. OAuth, Open ID Connect, SAML)

➢ Secure communication (e.g. MQ, SFTP, FTP-S)

• Strong analytical and problem-solving skills

• Resourceful and self-motivated team player

• Good written and verbal communication skills in English

Responsibilities

1. Primary point of liaison for service management of assigned customers.

2. Escalation management, able to analyze and identify root causes on service issues to ensure corrective and preventive actions are implemented effectively.

3. Work with Data and Process team to streamline processes and support for further improvements.

4. Present Dashboard reporting, daily shipment planning and shipment status update regularly.

5. Own and develop the regional relationship with the customer and defuse any tension that may arise and escalate accordingly when needed.

6. Track the performance of the whole network for the assigned account.

7. Follow up closely with Operations / Origins / Destinations to rectify the data issues or missing EDI transmissions till complete transmission.

8. Attend to queries from Customer, Operations / Entities on inbound and outbound with regards to events/milestones and deviation with reason codes.

Authorities

1. Execute control tower initiatives.

2. Ensure adherence to established work standards and work processes.

• Undertake all stages of Projects, from start to end.
• Calculate quantity of material for the whole project.
• Timely coordination and follow up with the Plumber/ Main-contractor or Consultant.
• Preparation of Shop Drawings, Beam Penetration Drawing.
• Submission of the relevant documents (Risk Assessment and Safety Work Procedure, method statement, material catalogue) as required by the Site Main Contractor.
• Co-ordinate with the Project Manager, Project Engineer and/or Project Supervisor on the projects and emails, support sites with drawings and details.
• Co-ordinate and resolve all technical problems from sites.
• Attend major site meetings, Testing and Turn-on.
• Update drawings as required.
• Perform regular updates on project status for meetings.
• Track progress of sites.
• Co-ordinate with all other Engineers and Supervisors for site progress, logistics and manpower scheduling.
• Liaison with clients for remote trouble shooting and advice in servicing and maintenance
• Assist in scheduling Service Technicians and manpower coordination
• Assist in document submissions and controlling
• Tracking and follow-up for every service and maintenance cases
• Review project schedules and ensure timely submission of documents to Authorities.
• Ability to work closely with Engineer for various Project phases.
• All drawings and correspondences must be well documented.
• Any other ad-hoc duties as and when instructed by Management.

Job’s Holder Specification

Possess a Diploma in Civil/Mechanical Engineering.
Proficient in MS Office and AutoCAD.
Lots of initiative and excellent organizational skills.
Must possess integrity and drive.
Ability to withstand emotional distress and work pressure.
Possess excellent interpersonal skills- to deal with customers and external contacts.
Good team leading skills.
Ability to make good decisions.

Possess class 3 driving license

The Quality Assurance Specialist is responsible to:
- Maintain and ensure effectiveness of the Quality Management System in Singapore,
- Perform product complaints handling for Singapore,
- Perform Adverse Events reporting to local regulatory authorities of Singapore,
- Perform Field Safety Corrective Actions and reporting for Singapore.

Responsibilities:

• Quality Assurance for all aspects of the Quality Management System (QMS) of Singapore Distribution Centre (DC), including maintenance, continued compliance, and certification.
• Ensure quality and regulatory compliance to relevant applicable standards such as GDPMDS (Singapore)

• Be responsible for operational quality matters including product hold in Singapore.

• Act as the Complaints Handling unit for Singapore.
• Conduct training of staff in QMS to ensure relevant staff are trained to the latest revision of procedures.

• To perform assessment and adverse event reporting to local authorities of Singapore.
• Execute Field Safety Corrective Actions (FSCA) in Singapore, including reporting to local authorities.

• Manage outsourced activities to ensure vendors meet the Cook Medical's quality standards.

• Coordinate or investigate CAPA to ensure nonconformances are addressed effectively.

• Schedule and perform internal audits. Host or support external audits.

• Perform trending and produce metrics for DC performance, measuring against key performance indicators.

• Maintain up-to-date knowledge and compliance with Global policies and procedures and to implement locally.

• Participate in global projects and meetings if applicable.

• Act as the local contact person for Data Protection facilitation.

• Perform other tasks assigned by Manager.

• Have a sound understanding of, and comply with, the COOK Code of Conduct and Company Compliance requirements.

Requirements:

• At least 3 years working experience as quality assurance in the medical device field.

• Degree in Science, Engineering or other related discipline.
• Experience in adverse event assessment and reporting for Singapore.
• Experience in Field Safety Corrective Action execution and reporting for Singapore.
• Experience in multinational medical device company preferred.

• Excellent communication and interpersonal skills, able to work with people from different levels internally and externally.
• Excellent time management and organizational skills. Able to perform duties with limited supervision and meet deadline.

• Fluent in English (both spoken and written).
• Skilled in document management.
• High level of computer skills including Microsoft Office.
• Multi-tasks and able to prioritize the job tasks, depending on the urgency.
• Positive attitude, be good team player and attend to details.

COMPMNAY SEEKING TO HIRE MECHANICAL ENGINEER DESIGNER

• Lead and participate in the design and development of mechanical components and systems.
• Utilize CAD software to create detailed 3D models of mechanical components, conduct simulations, and analyze designs to optimize performance and meet specifications.
• Coordinate the prototyping and testing of mechanical components, conducting thorough evaluations to validate design concepts and identify areas for improvement.
• Create comprehensive documentation, including engineering drawings, specifications, and test plans, to support the manufacturing and assembly processes.
• Assist and support in DFMEA preparation.

The Successful Applicant MUST possess the following

Qualifications:

• Bachelor's or Master's degree in Mechanical Engineering or a related field.
• Proven experience in mechanical design for consumer electronics or smart devices.
• Understanding of injection molding or stamping will be an added advantage.
• Proficiency in at least one CAD/CAE software.
• Strong analytical and problem-solving skills.
• Excellent communication and collaboration abilities.

Wipro Limited is a leading global information technology, consulting and business process services company. We harness the power of cognitive computing, hyper-automation, robotics, cloud, analytics and emerging technologies to help our clients adapt to the digital world and make them successful.

A company recognized globally for its comprehensive portfolio of services, strong commitment to sustainability and good corporate citizenship, we have over 220,000 dedicated employees serving clients across six continents. Together, we discover ideas and connect the dots to build a better and a bold new future.

Senior Firmware Engineer

The purpose of this role is to design, test and maintain softwareprograms for operating systems or applications which needs to bedeployed at a client end and ensure its meet 100% quality assuranceparameters

Skills

• C, C++ Programming, RTOS, ThreadX, Linux

Responsibilities

• Be the firmware developer and integrator role.
• Firmware development process and integration.
• Do troubleshooting and resolve issues quickly.
• Effectively communicate with customer and other stakeholders.
• Good sense of quality and work towards delivering quality products ontime.

Requirement

• Minimum 5 years of experince.
• Expert in C and C++ Programming.
• Experience in firmware development in Linux environment & RTOS
• Experience in firmware with ThreadX or Linux.
• Knowledge of Embedded design concepts, processor architectures, ARM Cortex, Memory management.
• Good debugging experience and proficient in handling debuggers.
• Usage of tools like Jira, Git, Github.

Nice to have skills

• Programming in Python.
• Firmware experience in one of more of following areas - LCD Display, Analog ASICs, GPIO, ADC, Power management.
• Linux low level skills, kernel build, experience in yocto, configuration.
• Experience in porting firmware from one hardware platform to another.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, caste, creed, religion, gender, marital status, age, ethnic and national origin, gender identity, gender expression, sexual orientation, political orientation, disability status, protected veteran status, or any other characteristic protected by law.

You will work alongside seasoned Engineering professionals and learn on the job while applying the theory you have learned in school.

Internship duration: 3-6 months and if you like it, you may join us as a Full Time Trainee

Singaporeans only

Responsibilities

• Assist with technical tasks such as troubleshooting, testing, and repairing equipment.
• Responsible for researching new technologies, equipment, or products to support the company's goals.
• Responsible for recording data from equipment tests or experiments, which may include inputting data into spreadsheets or databases.
• Responsible for assisting with equipment maintenance, including cleaning, calibration, or other routine maintenance tasks.
• Assigned to support project teams, assisting with project planning, testing, and documentation.
• Learn and develop their technical skills and knowledge throughout their internship, which could include attending training sessions or workshops.

Requirements

• Interns interested in this position should hold relevant certifications in Marine Engineering or a related discipline (NITEC/Diploma/Degree)
• Regular working hours are 8:30-17:30

Job Description:

• Able to implement approved patches/releases deployment accordingly to Change Request
• Able to maintain network and system security included cybersecurity advisories
• Able to perform installation and configuration of systems and application software
• Able to perform scheduled maintenance for servers, workstations, switches, routers, networks appliances in UAT, DR and Production Environment
• Able to perform server patch management
• Able to diagnose and resolve technical hardware and software related issue
• Diagnose and troubleshoot VSAT system symptoms and information with computer software and test equipment
• Interpret troubleshooting results and determine best course of action to restore VSAT system
• Install new VSAT equipment and upgrade components or systems, preferably with C-band and Extended C-band equipment
• Perform scheduled maintenance for VSAT system

Requirements:

• Minimum 2 years experienced with IT maintenance and support.
• At least 3 years of experience in IT field, with background in IT maintenance and support
• Familiar with Symantec EndPoint Protection, Windows Server, RHEL 7, MSSQL Server, VMWare ESXi 6.7
• Familiar with SendQuick or other SMS gateways, SOPHOs or other email forwarding application
• Knowledge of configuring and troubleshooting switched and routed networks
• Knowledge of basic Linux commands will be preferred
• Good team player with strong communication and interpersonal skills.
• Required to perform 24/7 offsite standby duty (bi-weekly engineering support)

Responsibilities:

• Determine the scope based on requirements, including stating the scope of work, calculating the resources required in delivering the service and advising the senior system engineer preparing the quotation
• Install and configure services as per the approved implementation plan
• Carry out technology, professional and maintenance support services as per scope within the stipulated duration/ timeline
• Provide level 1 support (basic hardware break-fix & troubleshooting of hardware and software issues ) for installed services
• Provide technical deliverables such as high level design document, user acceptance test (UAT) doc and as-built documentation
• Provide outstanding quality of service and meet predefined customer service level agreement (SLAs)
• Undergo technical trainings and obtain technical certifications that are required to meet suppliers’ mandatory technical requirements
• Conduct knowledge transfer training (where required) 

Knowledge, Skills and Experience:

• Minimum 3 years of relevant experience
• Certified in at least one of the technology domain (Infrastructure hardware and software, hyperconvergence, network, security, cloud and/or end user computing)
• Strong technical knowledge on the assigned solution domain/product
• Knowledge of product portfolio in other technology domain is desirable
• Expertise in enterprise products implementation, migration and support.
• Strong interpersonal skills with a customer-centric attitude
• Strong oral and written communication skills
• Strong attention to technical details, priority management and planning skills
• Ability to work independently with little to no supervision
• Results-oriented
• Strong documentation skills

What’s In It For You?

• Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.
• Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.
• Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.
• Diversity, Equity & Inclusion: It’s not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.
• Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.
• Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.

Don’t meet every single requirement? Apply anyway.

At Tech Data, a TD SYNNEX Company, we’re proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you’re excited about working for our company and believe you’re a good fit for this role, we encourage you to apply. You may be exactly the person we’re looking for!

· Station at construction site

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Proficiency in English and Mandarin is mandatory to liaise with Mandarin speaking Customers and Colleagues

· Able to communicate and liaise well with main con and RTO / RE

· Handling technical and engineering issues.

· Liaison and meeting with client's representatives, relevant authorities

· Proficient in Microsoft Office

· Proficient in Autocad

Job Summary

Imagine what you could do here. At Apple, new ideas have a way of becoming phenomenal products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish! The success we are striving will be the result of very skilled people working in an environment which cultivates creativity, partnership, and thinking of old problems in new ways. If that sounds like the kind of environment that you find intriguing, then let's talk! We design, develop, and launch next-generation Sensor Technologies in Apple products. The Sensor Hardware team develops sensor solutions and technologies for a variety of Apple products such as iPhones, iPads, and Macs. The key goal of the Sensor Technology team is to enable the world’s best user-experience. New challenges arise every day that require the sharp problem-solving skills of hardworking and experienced individuals. Are you in for these challenges? The team features a collaborative and hands-on environment that fosters engineering excellence, creativity, and innovation. We are looking for Hardware Development Engineer with strong background in electrical design, characterization, data analysis, and system-level troubleshooting to help develop new optical sensors and sensing systems for future Apple products. Join us in crafting solutions the world doesn't know of yet.

Key Qualifications

• Multi-disciplinary understanding of electronics, basic optics, and general physics principles.
• Strong electrical engineering background in analog and mixed-signal system-level circuit design, especially board-level circuit
• Good knowledge of inter-module communications protocols (I2C, SPI, etc.)
• Hand on experience in hardware and circuit validation using lab measurement equipment (oscilloscope, analyzers, etc).
• Proficiency in scripting for modelling, automation, data acquisition, and data analysis (Matlab, Python, etc)
• Excellent written and verbal communication skills, and solid teamwork and leadership skills.
• Experience with production data statistical analysis and optical sensor systems mass production is a plus

Description

• Identify, implement, and document new optical sensing system metrics and specifications to deliver performance that matter to customer experience.
• Build lab bench and measurement automations to support design validation and characterization across all development phases.
• Analyze engineering and production data sets to validate system performance and design maturity.
• Lead failure analysis of optical modules and system integrations, driving corrective actions with cross-functional teams and suppliers.
• Author regular technical communications for executive and cross-functional briefings.
• Scope new optical sensing technologies and proof-of-concept investigations.
• Business travel to support product development and supplier teams as necessary.

Education

Degree in Electrical Engineering, Optics, or Physics. M.S/PhD, or B.S. with proven hardware development experience.

Job Summary

Imagine what you could do here! At Apple, new ideas have a way of becoming extraordinary products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish. We at Apple don’t just build products — We create the kind of wonder that’s revolutionized entire industries. It’s the diversity of our people and our ideas that inspires the innovation that runs through everything we do, from amazing technology to industry-leading environmental efforts. Join Apple, and help us leave the world better than we found it! Excellent opportunity to join our Process Development team. The successful candidate will have opportunity to conduct feasibility studies, develop new process and material development for new module technologies under research and development.

Key Qualifications

• Minimum 5 years of experience in doing process R&D
• Hands-on experience in various module assembly processes such as flip chip, flex attach, pick and place, dispensing, bonding, filling, laser soldering, component cleaning, curing, plating, singulation, wafer bonding.
• Good knowledge in design of experiment (DOE), engineering statistic, root cause analysis and problem solving
• Familiarity on different metrology tools and quantitative measurement methodology
• Clear and effective written and communication skill
• Resourceful and innovative
• Knowledge and work experience in one or more of the following processes & handling such processes equipment - 1) Flip Chip bonding (Thermosonic, Thermocompression and etc) OR 2) EVO die bonder, EVG and Suss process equipment OR 3) Flex Attach (Flexible Printed Circuit Board Bonding), Solder Jetting/Laser Wire Soldering OR 4) SMT (e.g. solder printing, component pick&place, AOI, SPI and reflow)
• Knowledge on adhesive or epoxy or other bonding material is an advantage
• Experience in optical components, active alignment and high accuracy bonding process is preferred

Description

• Work on process equipments to conduct proof of concept evaluation and DOEs
• Establishment of baseline process and metrics
• Perform process characterisation
• Establish design guidelines for manufacturabilty
• Define procedures and metrologies
• Generate engineering report base on studies and evaluation
• Reporting of engineering studies to cross-functional team

Education

Degree holder in Engineering or equivalent.

Job Summary

Imagine what you could do here. At Apple, new ideas have a way of becoming phenomenal products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish! The success we are striving will be the result of very skilled people working in an environment which cultivates creativity, partnership, and thinking of old problems in new ways. If that sounds like the kind of environment that you find intriguing, then let's talk! We design, develop, and launch next-generation Sensor Technologies in Apple products. The Sensor Hardware team develops sensor solutions and technologies for a variety of Apple products such as iPhones, iPads, and Macs. The key goal of the Sensor Technology team is to enable the world’s best user-experience. New challenges arise every day that require the sharp problem-solving skills of hardworking and experienced individuals. Are you in for these challenges? The team features a collaborative and hands-on environment that fosters engineering excellence, creativity, and innovation. We are looking for Hardware Development Engineer with strong background in electrical design, characterization, data analysis, and system-level troubleshooting to help develop new optical sensors and sensing systems for future Apple products. Join us in crafting solutions the world doesn't know of yet.

Key Qualifications

• Multi-disciplinary understanding of electronics, basic optics, and general physics principles.
• Strong electrical engineering background in analog and mixed-signal system-level circuit design, especially board-level circuit
• Good knowledge of inter-module communications protocols (I2C, SPI, etc.)
• Hand on experience in hardware and circuit validation using lab measurement equipment (oscilloscope, analyzers, etc).
• Proficiency in scripting for modelling, automation, data acquisition, and data analysis (Matlab, Python, etc)
• Excellent written and verbal communication skills, and solid teamwork and leadership skills.
• Experience with production data statistical analysis and optical sensor systems mass production is a plus

Description

• Identify, implement, and document new optical sensing system metrics and specifications to deliver performance that matter to customer experience.
• Build lab bench and measurement automations to support design validation and characterization across all development phases.
• Analyze engineering and production data sets to validate system performance and design maturity.
• Lead failure analysis of optical modules and system integrations, driving corrective actions with cross-functional teams and suppliers.
• Author regular technical communications for executive and cross-functional briefings.
• Scope new optical sensing technologies and proof-of-concept investigations.
• Business travel to support product development and supplier teams as necessary.

Education

Degree in Electrical Engineering, Optics, or Physics. M.S/PhD, or B.S. with proven hardware development experience.

Job Summary

Imagine what you could do here. At Apple, new ideas have a way of becoming extraordinary products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish. The people here at Apple don’t just build products — they create the kind of wonder that’s revolutionized entire industries. It’s the diversity of those people and their ideas that inspires the innovation that runs through everything we do, from amazing technology to industry-leading environmental efforts. Join Apple, and help us leave the world better than we found it. Join our dynamic operations team! In this role, as a NPI engineer you will be responsible for Project management and technical lead for new products and technology development.

Key Qualifications

• 3 to 5 years of experience in leading product development and qualification for module packages like camera, MEMs.
• Good project management skill and experience in leading multi-functional group
• Knowledge on assembly test process and equipment
• Clear and effective written and oral communication skill

Description

As the NPI Engineer, you will:

• Act as communication channel between internal stake holders and customers
• Manage project timeline, resources and logistics needs
• Manage direct and indirect BOM as needed by the project
• Lead project requirement and design reviews with multi-functional group
• Lead Tooling DFM with Process and Design Engineering teams
• Lead the review and consolidation of project builds results, postmortem analysis, improvement plan and insights
• Lead multi-functional engineering group on problem analysis and resolution
• Provide guidance and supervision to associate engineers

Education

Degree of Science in Engineering, Physics, Materials or equivalent