Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

We are seeking a highly motivated and experienced Quality Control Snr. Executive to join our team. The ideal candidate will have a strong background in ISO and AS certifications, as well as a proven track record in quality control management. In this role, you will be responsible for ensuring that our products and processes meet the highest standards of quality, aligning with ISO and AS certifications. You will collaborate with cross-functional teams to drive continuous improvement, implement best practices, and maintain a culture of quality excellence.

DUTIES AND RESPONSIBILITIES

• Assist in developing, implementing, and maintaining quality management systems based on ISO and AS standards.
• Oversee the day-to-day quality control operations, ensuring compliance with established standards and procedures.
• Providing guidance, training, and support to ensure consistent quality outcomes to quality control inspectors and technicians
• Conduct regular audits and inspections to identify areas for improvement, non-conformities, and opportunities for enhancing quality processes.
• Collaborate with production, engineering, and other departments to establish and enforce quality standards at all stages of the product lifecycle.
• Assist in the development and execution of quality control plans, including sampling techniques, testing methodologies, and documentation procedures.
• Manage the documentation of quality control activities, including inspection reports, test results, and corrective action plans.
• Monitor and analyze quality metrics to track performance and identify trends, presenting findings to management and suggesting improvement strategies.
• Stay up-to-date with the latest developments in ISO and AS certifications, as well as industry best practices, and incorporate them into the quality management system.
• Assist in the preparation of audits by external certification bodies, ensuring all necessary documentation is in place and readily accessible.

REQUIREMENTS

Qualifications and experience:

• Bachelor's degree in a relevant field (Quality Management, Engineering, Manufacturing, etc.); advanced degree or certifications (e.g., Six Sigma, CQE) are a plus.
• Minimum of 3 years of experience in quality control, with a focus on ISO and AS certifications.
• Strong understanding of ISO 9001 and AS9120 Standards, with the ability to interpret and implement their requirements effectively.
• Proven experience in managing quality control teams, driving continuous improvement initiatives, and fostering a culture of quality excellence.
• Proficiency in quality control methodologies, statistical analysis, and root cause analysis techniques.
• Excellent communication skills, both written and verbal, with the ability to present complex technical information to diverse audiences.
• Detail-oriented mindset with exceptional organizational and problem-solving abilities.
• Familiarity with quality management software and tools.
• Strong leadership skills and the ability to collaborate effectively across departments.
• For candidate with extensive experiences will be considered for Asst.Manager/ Managerial role.

Personal Qualities:

• Proactive, driven and resilient
• Able to work independently and as part of cross-cultural team
• Meticulous, accurate and attention to detail
• Professional and calm

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We work with organizations to protect them from cyber threats. We help detect new unknown cyber threats through research, fortify networks, and defend critical information infrastructures. Our team consists of cybersecurity experts who use the advanced techniques and technologies to deliver cutting-edge solutions and services.

Responsibilities:

• Develop, refine, and implement cutting-edge algorithms for product research and development or solutions utilizing ensemble or artificial intelligence model workflows.
• Construct APIs to deploy models as microservices/containers.
• Lead architectural and technical design, prototyping, development, and reviews of complex data and algorithmic pipelines.
• Engage in communication and negotiation of technical and analytical solutions, as well as architectural designs, with a diverse range of stakeholders.
• Stay updated on advancements in data science.
• Produce comprehensive technical documentation.

Requirements:

• Strong understanding of machine learning, deep learning, and data science with some hands on experience.
• Proficiency in Python programming language and frameworks such as PyTorch and TensorFlow.
• Excellent problem-solving skills and ability to work in a fast-paced environment.
• Strong communication skills and ability to collaborate effectively with cross-functional teams.
• Proven ability to adapt to new technologies and learn quickly.
• Work location: near Jurong East MRT

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Service, repairs, maintenance of Marine Electronics Systems on board the vessel including but not limited to Communication, Navigation and Bridge equipment.

Responsible for turn-key implementation of On-board Marine projects including Planning, Installation, Testing and Commissioning of Navigation and Communications systems such as: Radar systems, GMDSS stations, Gyro compass, Autopilots, BNWAS, Satellite TV systems, CCTV systems, Echo sounders, Speed logs, AIS, SSAS, Inmarsat terminals, ECDIS, SVDR, etc.

Strong service field orientation with a proven, demonstrable track record of having completed on-board installations, repairs and servicing of Radar`s, Gyro`s, Echo sounders, Speed logs, GMDSS equipment, Inmarsat terminals, Satellite TV systems, BNWAS, ECDIS, SVDR`s, AIS, LRIT, VTMS, VSAT, etc.

Pleasing personality, good interpersonal and communication skills.

An ability and willingness to adapt to on-shore installations and project execution (and pre-sales related activities, as required).

Ability to work independently or as a part of a team.

Ability to execute maintenance contract.

Ability to execute projects in time bound manner, within the allocated budget and resources.

Skills in computer hardware, networking and software are essential.

Responsible for maintenance/trouble shooting of plant equipment (mechanical and electrical systems) at water treatment and waste water treatent plants.

Prepare technical reports and submission to the clients.

Purchasing of materials as required.

Good technical knowledge and codes of safe work practice.

Maintain good housekeeping.

Minimum Diploma qualification.

Must possess WSQ certificates (BCSS, Confned Space Supervisor/Assessor, WAH)

Driving Licence Class 3 preferred.

5 years relevant working experience at Public Utilities Board (PUB) waterworks and water reclamation plants.

Duties & Responsibilities:

· Manage equipment to monitor instrumentation systems

· Responsible for instrumentation installation and network establishment

· Monitor work progress and preparation of necessary reports

· Liaise and coordinate with contractors, clients and co-workers to ensure smooth completion

· To troubleshoot, repair and resolve technical issues pertaining to electrical/ network

· Attend meetings when required

· Any other duties as assigned

Requirements:

· Degree/ Diploma in Civil Engineering or equivalent

· Min. 1 year of experience

· IT/ Software background is an advantageous

· Keen interest in geotechnical instrumentation and relevant experience will be advantageous

· Able to work independently and as a team

· Good communication and interpersonal skills

Key Responsibilities

• Plan, design, and manage construction projects, including infrastructrual works and building works.
• Conduct site inspections and ensure compliance with project specifications, standards, and safety regulations.
• Prepare detailed reports and technical documents.
• Collaborate with consultants, contractors, and project stakeholders.
• Monitor project progress and budget, addressing any deviations.
• Perform risk assessments and implement mitigation strategies.
• Ensure adherence to local, state, and federal construction codes.

Qualifications

• Bachelor’s degree in Civil Engineering or Structural Engineering from a recognised instituion.
• Fresh graducates are welcomed.
• Proficiency in software like AutoCAD, Civil 3D, and project management tools.
• Excellent analytical and problem-solving skills.
• Effective communication and team collaboration abilities.

What We Offer

• Competitive salary and benefits package.
• Opportunities for professional growth and development.
• Collaborative and dynamic work environment.

Job Description

• Develop battery data analytics processes and visualizations for vehicle programs.
• Data management and retrieval using Spark, Hive, Hue, and Jupiter Notebooks.
• Data analysis using Python, MATLAB, and R.
• Data visualization with Power BI, Tableau, Matplotlib, and ggplot2.
• Collaborate with battery data analytics and engineering groups on algorithm design, results, modifications, production issues, data consumption methods, and lessons learned.
• Apply analytical methods to assemble insight from electric vehicle usage data. Use the appropriate statistical methods to make actionable inferences.
• Fit complex models to multi-factor datasets using Python, MATLAB, R.
• Model and project the long-term trends of key electric vehicle metrics. Validate results.
• Apply statistical and machine learning models to understand battery production quality metrics.
• Contribute to analytics forums and cross-functional groups by sharing learning within and beyond Global Battery Engineering and Automotive Engineering for PSV operation.

Job Requirement

• Any qualification in Automotive/Electrical/Mechanical Engineering, Computer Science, Applied Mathematics, Statistics, or Data Analytics.
• Minimum technical knowledge of data analysis methods and success in solving complex problems.
• Proficiency using relevant tools. (Python, Spark, Hive, MATLAB, Power BI, R).
• Real-world experience using Hive to query Hadoop data file structures.
• Practical knowledge of machine learning and predictive methods.
• Ability to lead multiple projects and assignments with high level of autonomy and accountability for results.
• Knowledge of high voltage batteries and electrification subsystems.
• Electrochemistry background.
• Willingness to learn and quickly adjust to new tools and systems.
• Capable of converting ambiguous problem statements into concrete project requirements.
• Proven proficiency in statistical analysis techniques.
• Practical knowledge of machine learning and predictive methods.

Responsibilities:

• Daily site supervision
• Preparing and implementing project plans
• Monitoring safety procedures, production processes, and regulatory compliance
• Conducting RA
• Liaising with clients and other subcontractors

Requirements:

• Bachelor’s degree in Civil Engineering
• 4 years of relevant experience
• Strong analytical and critical thinking skills, with a high level of accuracy in calculations and design
• Great written and verbal communication skills
• Willingness to learn
• Team player and possess leadership qualities

Job Description

1. Authorities's approval application.
2. Drafting of CAD drawings.
3. Liaise with Civil PE for design calculations.
4. Liaise with supportive vendors for follow up documents.
5. Update operations with latest different site's information.
6. Site meeting/coordination.
7. Other ad-hoc duties.

Job Requirements

1. Degree in Civil/Mechanical/Electrical Engineering.
2. Required AutoCAD Skill.
3. Fast learner, Multi-tasking and able to work independently.
4. Fresh graduates are welcome to apply.

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Responsibilities:

• Perform servicing of Trane chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on Trane chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning
• Positive attitude

Job Description

• Plan and execute all scaffolding works with accordance to SS:CP14
• Liaise and coordinate internally with Clients and Contractors
• Comply to Company’s safety policy and safety management system and to enforce legislated safety requirement and the Company’s safety rules and regulations at site
• Supervise workers at site
• Identify the type of required scaffolding for the job

Job Requirements

• NITEC/Certificate in Marine Metal Scaffolding Certificate for Supervisors (MMSC)
• Minimum 3 years of experience in marine and offshore industry is preferred
• Possess good knowledge of WSH Scaffolding Regulations/Code of Practices, Association of Singapore Marine Industry (ASMI) Scaffold guidelines
• Must have Marine Metal Scaffold Supervisor course
• Strong planning, interpersonal and communication skills

The company's job contracts mainly Interior works & Mixed construction works

following qualifications are suitable & prefered

batchellor degree in civil engineering or Diploma in civil engineering with work experience

in autocad Drawings, basic Designings and project coordinates & able work with team members

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Job Duties and Responsibilities:

• Provide technical support to resolve technical inquiries from ships/vessels on Nordic Systems.

• Attend on-board service attendances and commissioning services, annual inspection and maintenance for vessels based on troubleshoot of the technical issues and feedback by chief engineer/vessel managers.

• Review service reports, customer technical specifications and provide support to sales team for bidding of spares.

• Troubleshoot issues involving electrical/electronic control systems, PLC products.

• Read and understand manuals, schematics, and P&ID's.

• Lead the preparation and coordination of ITRs based on approved electrical completion procedures.

• Prepare and update status of punch list and ensure all cleared punch items to be acknowledged by the client reps.

• Monitor and manipulate site execution in line with sequence of works.

• Handle technical issues, drawings, reports, procedures and any other relevant documents.

• Develop engineering capabilities and work with sales team on project proposal and bidding.

• Selection of equipment, materials for instrumentation and controls.

• Execution of projects.

• Plan and carry out E&I maintenances

• Manage Subcon and other adhoc activities, lead the team of technicians on site to execute the project.

Job Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic) or equivalent.

• Prior experience in the Maritime/Oil & Gas industries and shipyards will be highly advantageous.

• Excellent verbal and written communication.

• Possess excellent interpersonal and communication skills.

• Responsible, Meticulous and able to work under pressure.

• Proficient with Microsoft Office Applications (Outlook, Word, Excel, Power Point, etc).

• Experienced in PLC/SCADA systems.

• Fluency in English (verbal and written) is essential.

• Collaborate with engineers, architects etc. to determine the specifications of the project
• Negotiate contracts with external vendors to reach profitable agreements
• Obtain permit and licenses from appropriate authorities
• Determine needed resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations.
• Plan all construction operations and schedule intermediate phases to ensure deadlines will be met
• Acquire equipment and materials and monitor stocks to timely handle inadequacies
• Supervise the work of laborers, mechanics etc. and give them guidance when needed
• Evaluate progress and prepare detailed reports
• Ensure adherence to all health and safety standards and report issues
• Materials quantity take off , Drafting works if necessary

Job Requirements:

• Proven experience as Project Manager
• In-depth understanding of construction procedures and material and project management principles
• Familiarity with quality and health and safety standards
• Outstanding communications and negotiation skills
• Able to use Microsoft office , microsoft project , autocad , revit , naviswork and other engineering softwares skillfully.
• Excellent organizational and time-management skills
• A team player with leadership abilities
• Advances time management and analytical skills
• Excellent client-facing communication skills
• Candidate must possess at least BSc/BA in Engineering Civil) or Engineering (Metal Fabrication/Tool & Die/Welding) or relevant field (Degree is recognized by BCA will be an advantage)
• 5 years' experience in Project Management (Metal Works)
• Able to liaise with Chinese client

Working hour: 8:30am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Scope

· Designing, manufacturing, and installing components that fulfil requirements.

· Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement) （Preferably IN MARINE&OFFSHORE&MANUFACTURING INDUSTRY）

· Analyzing problems or deficiencies and developing solutions to resolve them.

· Conducting experiments and evaluations to improve and innovate product designs.

· Creating plans and designs using CAD technology.

· Evaluates final product’s overall performance, reliability and safety.

· Estimating budgets and time scopes for each project.

· Writing technical documentation for machine operators.

· Ensuring that products meet compliance regulations.

· Collaborating with project managers and other engineers in our team.

· Liaison with vendors on finalization of modules.

· Responsible for mechanical documentation.

Requirement

· Degree in Mechanical / Mechatronics Engineering or related disciplines with 3years’ experience.

· Diploma in Mechanical / Mechatronics Engineering or related disciplines with 5 years’ experience.

Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

Responsibilities:

1. Pre-sales and post sales activities in alignment with the Product Strategy for their respective countries in APAC region. Follow through on projects including planning and management

2. Constantly identifying, develop and explore new business opportunities with the customer to address the fast-emerging market need.

3. Responsible for tender/RFQ/RFP and provide support throughout project lifecycle

4. Coordinate closely with both internal and external stakeholders from project planning to deployment stage by ensuring timeline are met.

5. Responsible for gathering technical requirement and developing cost effective design solution for customers

6. Prepare and report regular updates to track key projects

7. Actively involved in engaging industry stakeholders in power solution sector to identify the customer needs and propose solution

8. Perform study and provide insight on competitor and market landscape analysis.

9. State product performance and characteristics to customers from a technical perspective

10. Be familiar with the technical route, technical standards, technical parameters and technical specifications of products

11. Be familiar with product related hardware, software, interconnection, app and other principles and logic

12. To respond to customer calls to troubleshoot technical problems of equipment, on-site inspection and attend emergency repair, to achieve customers’ satisfaction in turnaround time and minimize downtime

Requirements:

· Higher Diploma / Degree in Electrical Engineering & or other relevant Engineering qualifications

· Minimum 2 years of relevant experience in the related industry; junior candidate will be considered as well

· Experienced in handling power devices / power electronics / communication modules / electrical wirings

· Possess good analytical and problem-solving skills, exceptional interpersonal skills, attention to detail

· Candidate with sales experience will be an advantage.

· Ability to present ideas in a clean & user-friendly way

· Results oriented, self-driven, and a team player

• Create detailed designs and layouts for steel structures using CAD software (e.g., AutoCAD, Tekla, SolidWorks)
• Develop accurate structural drawings, including framing plans, connection details, and assembly drawings.
• Perform design calculations to ensure structural integrity, load-bearing capacity, and compliance with codes.
• Strong knowledge of steel structure design principles and software (e.g., STAAD.Pro, Tekla, SAP2000).
• Familiarity with construction materials, fabrication processes, and assembly techniques.

1. JOB DESCRIPTION

Job Title

Mechanical Project Engineer

Occupation

Engineer

Job Description & Requirements

Responsibilities:

• Site coordination of equipment assembly and troubleshooting.

• Follow up site technical issues.

• Coordinate and plan supply of materials to site.

Requirements:

• Degree from polytechnic with mechanical, electrical or related study.

• Min. 1 year of relevant working experience in plant or construction machinery.

• Excellent proficiency in Mandarin and English.

• Able to use Autocad or other CAD Softwares.

• Good knowledge of MS Excel and MS Word.

• Has class 3 driving license.

• Hands on and self-motivated to work.

• Advantage if having site experience.

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

Project Engineer will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. Attend and manage dealing with vendors, designers, classification, and flag statutory on engineering issues

5. Reviewing technical specification and drawings from designer meeting owner, class, and customer requirements

6. To perform any other duties & Responsibilities assigned by superiors from time to time.

7. Ability to demonstrate and implement cost -saving measures.

8. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Proficient in Microsoft office applications: Word, Excel, PowerPoint & Outlook

-Proficient in AutoCAD application

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

- Possess positive working attitude

Job Responsibilities

• Liaise between the various disciplines and departments to ensure works are carried out efficiently
• Ensure that the project meets the required specifications and standards
• Study and understand project spec, scope of work and scope of supply
• Assist to ensure that resources arrived are in accordance to the orders and requests raised
• Ensure that the resource allocations for production and project team are on time to ensure construction works can proceed on time
• Monitor and ensure that budgets are updated
• Support all HSE and QA/QC efforts and ensure works are in compliance to such efforts
• Assist in the preparation of reports to update the management on overall outyard activities
• Attend Client & Production Meeting together with Project Managers
• Tracks potential variations for the Projects and to follow up with Commercial
• Monitor progress status of individual Disciplines
• Submits Project Execution Plans for Tender Submission
• Any other ad-hoc duties assigned by Superior

Job Requirements

• Diploma/Degree in Mechanical Engineering
• Min 5 years of experiences in Marine Project Management holding the same designation
• Good management and leadership skills
• Have own vehicle to travel to site inspection when needed
• Able to travel overseas for short trip when required

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 3 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.