Duties

· Carrying out process design works in accordance with project contracts / scope of work

· Preparation of process deliverables including but not limited to calculations, simulations, H & M balances, PFDs, UFDs, P&IDs, Line list, datasheets, control philosophy, C&E Charts, Technical notes, Study reports etc.

· Equipment, Instrument sizing & and adequacy checks of existing ones

· Assist Process Safety works via participation in HAZIDs, HAZOPs and close out of action items ensuring design satisfies all operational and safety requirements

• Contribute to preparation of operating & training manuals, project documentation as required.

· Ensure design deliverables reflect accuracy and meets codes, guidelines & standards while following company QA/QC procedures

· Ensure that assigned work is delivered on schedule, budget with intended quality

• Producing cost effective solutions that are novel, technologically robust and fit for purpose,

· Management and coordination of the Process discipline engineers & designers to ensure effective use of the available resources

· Ensure that the design incorporates process integrity, conforms to mandatory standards, project requirements, good engineering practices and reflects the best possible option in terms of cost and efficiency

• Review facility layout, 3D-model and piping GA / ISO drawings and other cross-functional documents to ensure correct interpretation of process requirements.

· To be responsible for all the technical decisions or corrective actions associated with process design.

• Plan, Monitor & control process discipline workstream and provide progress updates to the PM and management team on a regular basis.
• Consult with other disciplines and foster a cohesive working environment.
• Coach and mentor lesser experienced team members
• Consult with the Client / Stakeholders on various discipline attributes of the project
• Handle Change management (if any) by timely initiating, coordinating, and seeking project / client approvals.
• Support Q & A activities related to department standards & procedures development

· Support to proposals and other business pursuits

Requirements

· Tertiary education in Chemical or Process engineering

• 10-15 years' experience (with minimum 3 years as Senior Process Engineer), Coal Gasification, LNG, New energies, Power, Refinery, Petrochem, O & G domain
• Those having experience in projects directly involving Coal Gasification, New Energy (H2, Ammonia, renewable energy), Energy Transformation or GHG Roadmap would be given preference.

· Experience in Conceptual, Feasibility and Optioneering Studies, with exposure to FEED, DE in an EPC/EPCm or Consulting environment

• Previous experience in managing a process team

· Able to collaborate & communicate effectively within a multidiscipline design team in a matrix organization, demonstrably a good team player

• Skills in Microsoft Office Programs (Word, Excel, Outlook, Power point etc.) and process simulation software particularly those to be used for projects
• Self-organised, has ability to work under tight deadlines, and able prioritize work to achieve intended outcome.
• Has great analytical thinking, requires min supervision
• Takes ownership, works with integrity
• Command over reading and written English.

1. To lead site production and engineering projects and act as project coordinator as a main responsibility and keep continuous tracking of projects. Must have proficiency / experience in the Microsoft project software and project tracking.
2. 5-10 years of experience in the green field / brown field area project management.
3. Capability handles the project from USD 2-5 million.
4. Certified Project management professionals shall be preferred.
5. Planning and follow up all new and retrofit projects of Oral formulations for the manufacturing site.
6. Responsible for development of SOPs, quality standard, development and execution of Qualification protocols with following site QMS procedures.
7. Person shall have AutoCAD proficiency.
8. Responsible for managing a team of vendors / contractors.
9. Techno commercial evaluations of consultants, vendors, and contractors.
10. Coordinating with statutory authorities for relevant approvals.
11. Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.
12. Ensuring best available technologies are incorporated by design.
13. Delivering the project within the budget and timeline approved.
14. Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.
15. Ensure to maintain the highest standards for cGMP requirements for the manufacturing site.
16. Ensure to meet the required regulatory requirements (e.g. HSA, FDA etc.) and keep the site audit ready all the time.
17. Achieve financial objectives through efficient project management.

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for FP & Plumbing system installation and troubleshooting on site
• Prepare material requisition for all FP & Plumbing equipment and materials
• Prepare work programme for FP & Plumbing works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of FP & Plumbing system, including detailed design, calculation, shop drawings, pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with FP & Plumbing suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for FP & Plumbing system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all FP & Plumbing equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling FP & Plumbing works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in FP & Plumbing design calculations and Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Senior/Staff Software Engineer, Edge AI - Toolchain

Job Description

We are looking for Senior/Staff Software Engineers to grow our Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

This position works in a smaller team that specifies, develops and delivers the toolchain that allows our customers and partners to develop or port AI models to run optimally on our Neural Processing Units.

Responsibilities

• Specify and develop new toolchain features for existing and new NPU architectures, working with the inference engine sub-team
• Enhance, maintain and support existing toolchain features, and modify model network layers for NPU optimality, working with the application engineering teams and sometimes customers/partners.
• Constantly improve productivity through automation in all areas

Skills

• Strong Python class based product development skills based on knowledge of design patterns
• Strong understanding of all aspects of a compiler and related development and debugging technologies, code generation, program analysis, and pipeline optimizations
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc.
• Familiarity with the following is a plus:
• Deep Learning compilers like TVM
• Deep Learning framework - PyTorch
• Eclipse development for toolchain frontend
• CPU/DSP/GPU/NPU architectures

Requirements

1. Ph.D./MS/BS in Computer Science or Computer Engineering
2. At least 5 years of commercial development experience of which at least 3 are in compiler-related areas

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.
  

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• To understand quality requirements and standards and verify conformance in production line.
• To analyse audit findings to minimise process non-conformances in the production line.
• To accurately record and communicate observations from audit/inspection to affected parties and team.
• To inspect sub-assemblies and finished product, both visually and functionally.
• To work in factory environment, which will involve walking around with appropriate attire and safety PPE.
• To observe required factory and safety rules, when performing daily duties.
• To provide accurate reports to engineers and managers on a timely basis.
• To provide suggestions for improvements or highlight challenges encountered.

• Minimum ITE certification with at least 1 year of experience.
• Proficient in Microsoft Excel, Word, PowerPoint, and Outlook.
• Able to work independently with minimal supervision.
• Willing to learn new skills, with passion for quality.
• Troubleshooting skill knowledge will be an advantage.

Key Responsibilities:

• Conduct comprehensive assessments of current production methodologies to identify opportunities for technological advancements that improve efficiency, safety, and product quality.
• Identify, evaluate, and integrate cutting-edge technologies to enhance operational efficiency, reduce waste, and ensure product quality. Present updates and results to stakeholders to showcase innovation progress.
• Plan, execute, and oversee engineering projects focused on innovating production processes through advanced technologies, ensuring timely and budget-conscious implementation.
• Implement rigorous testing protocols and quality control measures that leverage technology to uphold product safety and compliance with industry standards.
• Analyze existing processes to uncover inefficiencies, recommending innovative, cost-effective solutions that maintain quality and safety. Prepare and track budget estimates for technology upgrades and process improvements.
• Maintain detailed project records that capture design specifications, testing results, and performance evaluations, facilitating knowledge transfer and transparency in innovation efforts.
• Provide regular updates to stakeholders, emphasizing technological advancements, challenges, and overall project performance with a focus on innovation outcomes.

Job Requirements:

• Degree in Chemistry, Mechanical Engineering, or equivalent
• Minimum of 2 years in the packaging industry;
• Specialization in product development and process improvement with a strong emphasis on innovative packaging solutions.
• Proficient in Microsoft Office (Excel, Word, PowerPoint).
• Strong communication, problem-solving, analytical, planning, time-management, and multitasking skills.
• Knowledge of Project Management, Solidworks, and SAP would be advantageous.
• Excel in dynamic environments, demonstrating flexibility in response to technological changes and challenges.
• Anticipate and meet the evolving expectations of internal and external customers, striving for service excellence.
• Uphold high ethical standards, maintaining professionalism and reliability
• Collaborate effectively within teams to drive innovation and achieve business objectives.
• Monitor and track progress on innovative initiatives to ensure efficient and effective completion.

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide.

We offer field service repairs, inspections, overload load testing, dry-dock repair supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Crane & Deck Machinery Service operations in Singapore, we are employing experienced Senior Service Engineer - Ship Cranes as follows:

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage
• Ship Electricians are welcome to apply.

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide. We offer field service repairs, inspections, overload load testing, dry-dock repair supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Crane & Deck Machinery Service operations in Singapore, we are employing experienced Senior Service Engineer - Ship Cranes as follows:

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage
• Ship Electricians are welcome to apply.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking a Senior QA Engineer who will be responsible for developing and implementing effective QA strategies and methodologies and carry out detailed functional testing to ensure products are well tested before market release. In this role, you will be required to work closely with the development team and product managers to ensure that the products meet the quality standards. You will also be responsible for creating and maintaining test plans and schedules.

Job scope and Responsibilities

• Work with product stakeholders to work out test strategy and create product test plan for new products and maintain the test plans for existing products.
• Perform product inspection and functional testing for quality and conformance to product specifications and deliverables.
• Generate test reports and conduct processes such as data and result archival
• Participating in product quality review meetings with product stakeholders
• Conduct Investigation of internal and customer reports of product quality issues and perform follow up testing, documentation and reporting.
• Monitor and maintain product issue logs and provide updates to managers and product development team.

Requirements & Skills

• Minimum 3 years of experience in product software or system testing
• Experience in leadership roles, especially in QA relevant positions will be favorable
• Strong knowledge of products or software QA methodologies and tools
• Good analytical and troubleshooting skills
• Strong communication and interpersonal skills
• Strong in written communication and report writing
• Ability to work in a fast-paced environment and meet deadlines
• Experience or expertise in any of the following domain areas will be favorable:
  • Networking or networking domain knowledge (CCNA, CCNP) or products e.g. router or switch
  • Software development and/or test automation scripting
  • Cybersecurity domain knowledge (e.g. SSCP, CISSP) or products, e.g. encryption, IDS or firewall products
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

4 Months Contact

Job Description:

• Assist in developing and implementing web and mobile digitalizations
• Collaborate with team members to gather and refine requirements for new features
• Conduct basic testing and debugging to ensure application functionality
• Document code and processes to improce team efficienct and product quality
• Participate in regular team meetings, sharing progress and ideas fro improvement
• Support troubleshooting and provide general maintenance for applications

Requirements:

• Higher ntiec IT Application Development
• Basic knowledge of programming lanuages (E.g. NET, JavaScript, SQL)

As the Facility & Security Engineer, you will be responsible for overseeing all aspects of facility operation, maintenance and projects within our electricity generating plants, ensuring compliance with local regulatory policies. In addition, you will be involved in the development of a Facilities Asset Management Plan, identifying improvement opportunities and implementing best practices.

Responsibilities:

• Plan and coordinate infrastructure and equipment maintenance schedules & activities.
• Respond to work order requests and equipment maintenance schedules & activities.
• Investigate, analyze and determine root cause and report breakdowns and faults effectively.
• Carry out and review facilities’ maintenance programs and recommend actions as required.
• Identify and report on plant and equipment inefficiencies and possible improvement initiatives.
• Evaluate operational systems and facility infrastructure to ascertain and improve operational efficiencies.
• Monitor and review plant infrastructure, asset life expectancy and implement long-term maintenance plans.
• Prepare Purchasing Documents for the purchase of spares & the purchase of Work Services required to carry out the rectification works of the faulty equipment, faulty buildings’ infrastructure etc. (E.g. Preparation of tender specifications for service contracts such as cleaning, landscaping, pest control, waste disposals, card access systems, lifts & sewerage treatment plants’ service & maintenance works, auto-gates/ auto-barriers maintenance).
• Prepare the Facility Asset Management Plan (AMP).
• Design and oversee the implementation of facility expansion, layout, systems, and quality controls.
• Engage contractors and establish procedures to supervise and monitor the performance of contractors to ensure that the company’s requirements for work services are met.
• Ensure compliance with relevant regulations, building codes, and health and safety standards.
• Prepare technical reports on breakdowns, proposals and compliance documents.

Requirements:

• Degree in Mechanical, Electrical, Facilities Management Engineering or equivalent.
• Experience with SAP, and MS Office, especially Excel & PowerPoint.
• Knowledge of the building regulatory requirements in Singapore.
• Strong verbal and written communication skills.
• Strong troubleshooting, problem-solving and project management skills.
• Experienced in managing small to medium scale plant & building facilities incorporating maintenance plans, scheduling, costings, and cost controlling.
• Experienced in carrying out plant & buildings maintenance works, demonstrates personal creativity and/or flexibility in problem solving and budgeting process approaches

A member of the Electrical team, you will be responsible for performing Electrical maintenance works in accordance to maintenance plan including carrying out projects as required.

Job Descriptions:

• Perform troubleshooting and root cause analysis to resolve plant faults
• Execute approved plant improvement works and prepare technical specifications for equipment parts, work services and raise requisition papers
• Perform scheduled plant inspection according to maintenance regime and execution of plant maintenance activities
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Preparation of weekly and monthly activity reports, overhaul, technical and trip reports
• Perform other duties as assigned by supervisors

Job Requirements:

• Graduate in Electrical Engineering with a keen interest to build a career in the Power industry
• Sound knowledge in Electrical
• Self-motivated team player; analytical mind with strong planning & problem solving skills
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Hunter role need to exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. Diploma Holder in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal hunger for success and communication skills

· Initiative and results driven

· Entry level candidate are welcome

Job Description – Service Engineer (Maintenance Lead)

We are looking for a Service Engineer as Maintenance Lead to lead and supervise the maintenance team in maintaining and managing system hardware and networks at customer site located over Singapore island to meet the contractual Service Level Agreement (SLA). The Service Engineer shall report to and under the supervisory of the Maintenance Manager (Reporting Officer (RO)). Hiring shall be 1 year services contract via agent arrangement with option to extend or convert to direct outsource or permanent hiring.

Responsibilities

· Assist the RO in Preventive Maintenance (PM) and Corrective Maintenance (CM) tasks and devise maintenance schedule and resources planning and deployment.

· Provide solution guidance to the Service Technicians and generation of maintenance documentation such as PM & CM report to RO for review and final release to customer.

· Provide CM on faults to establish root cause on an ad-hoc basis including I-level & D-level testing and troubleshooting on equipment

· Plan and perform PM to system equipment at scheduled/ periodic basis including O-level testing and sensors calibration to ensure optimal operational performance

· Collaborate with OEM to establish root cause of fault findings and D-level components repair

· Supervise sub-contractor performing maintenance at site

· Convey updates to RO and customer on maintenance progress.

· Review with RO on maintenance processes and resources etc for maintenance process improvement.

Requirements

· Holding recognised Professional Certificate minimum with Higher Nitec/Diploma/ Degree in Electronics/ Electrical/ Mechanical /Mechatronics/ Aerospace Engineering or equivalent from recognised institution or at least 5-yearsworking experiences in above mentioned engineering fields.

· Advantage if have the knowledge and experience working with sensor, control, automation, and Information Technology (IT) system troubleshooting

· Resourcefulness and logical in problem-solving aptitude.

· Able to travel and work under non-conducive environment including site located at offshore island, buoys and in high security areas such as military base, and airport etc

· Ability to lead and manage a team, and to work independently with minimum supervision.

· Ability to conduct risk assessment and provide advisory to the team member and RO.

· Preferably holding a Class 3 driving license and familiar with Environmental, Health and Safety (EHS).

· Ability to converse well in English language and technically.

Job Description:

• Conduct site testing & commissioning activites
• Carry out field services such troubleshooting, repairing, maintenance & operation of electro-hydraulic machines
• Preparation of equipment and spares for project mobilization
• Support the project team during the fabrication, assembly & testing stages

Job Requirements:

• Candidate must possess a Degree/Diploma in Electrical/Mechanical Engineering
• At least 2 Year(s) of relevant working experience
• Preferably with knowledge of hydraulics, electric drives, controls
• Good troubleshooting & communication skills
• Willing to travel overseas frequently
• Independent, resourceful & responsible
• Inexperienced applicants are also welcome to apply