• Install, improve tools, perform maintenance, and compile alarms for equipment.
• Troubleshoot and repair equipment to minimize downtime.
• Analyze equipment failures, create pareto charts, and conduct weak point analysis for improvement.
• Lead continuous improvement initiatives for cost reduction, yield improvement, and OEE improvement.
• Prepare technical reports documenting equipment performance and activities.

Requirements:

• Minimum Degree in Electrical Engineering or equivalent.
• Having prior experience in the semiconductor industry (field of cleaning and polishing of silicon wafers).
• At least 3 years of relevant working experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Improve applications by integrating new technologies and performing upgrades.
• Provide technical assistance to users and collaborate with development teams to address maintenance and necessary updates.
• Contribute to manage UAT , demonstrate prototypes and completed applications showcasing prototypes as well as completed applications.

Requirements:

• Diploma in Computer Science or equivalent.
• At least 2 years of relevant experience.
• Proficient in various Frameworks (Microsoft C#.Net, Microsoft VB.NET, Microsoft SQL Server, Microsoft Azure, PHP, React, Mobile Apps and AWS Micro Services).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Collaborate with a team of developers to deliver modules for the development of web-based application systems.
• Support in UAT process.

Requirements:

• Diploma in IT or equivalent.
• At least 2 years of experience in Java backend development (J2EE).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

• Implement software development/support for automated computer vision equipment.
• Participate in Software Development Life Cycle.

Requirements:

• Diploma in Engineering
• At least 2 years of working experience in Visual Studio Development Environment.
• Good understanding of automated Computer Vision equipment, image procession automatic

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Technical Sales Engineer/ Product Sales Engineer

Location: Bukit Batok

Working Days: 5 Days

Working hours : 9am - 6pm

Salary : SGD2,200-3,500 (not inclusive of transport allowance, bonus/commission)

Job Responsibilities:

• Develop a thorough understanding of our complete range of product
• Responsible for preparing quotations, proposal according to customers' requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analyzing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products.
• Industry: Electrical & Electronics

Requirement:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/
• Passion for automation, with creative and adaptive approaches

Skills

• PLC programmable logic controller programming, touch panel, Control And Automation

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Support Microsoft Dynamic Navision ERP system, and produce Jet Reports
• Support and implement new EDI solutionsand applications. Develop and maintain EDI integration using XML
• Hardware and software installation and maintenance

Requirements

• Min Diploma in IT
• Ideally experience in hardware and software installation and maintenance
• Must be strong in Navision Application support in manufacturing (Inventory, warehouse management, production), finance, purchasing, sales support
• Web development knowledge an added advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing technical support to the plating department laboratory and engineering and manufacturing activities
• Responsible in resolving all chemical related issues.

Requirements

• Min Diploma in Chemistry or Chemical Engineering
• Min 3 years of working experience in laboratory in chemical industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 5 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 5 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma holders with at least 5 or more years of experience in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities

• The candidate will be required to perform electrical testing, test data analysis & automation across SiC power and RF/mmWave GaN devices.
• The candidate hands-on characterization work will encompass from low voltage I-V/C-V to high voltage breakdown, switching performances for SiC, and DC & high-frequency characterizations for RF/mmWave regime.
• The candidate must have hands-on experienced in handling Keysight 4156C and B1500A/Keithley K4200 Device Analyzer, B1505A High Power Device Analyzer with N1265A UHC Fixture and Keysight 4284A/4285A and E4908A LCR Meter independently on their own.
• It will be a plus if the candidate has knowledge of instrumentation control using LabView and some other software like Python, C++ etc .
• The candidate is required to have at least some basic semi-conductor knowledges of semi-conductor devices like P-N Junction, Diodes, CMOS etc.
• The candidate can be exposed to process and device design/simulation with commercial TCAD tools (e.g. Silvaco Victory Process and Victory Device, Sentaurus Process and Device, etc) as part of the learning development and eventually be working on wide bandgap devices team.

Qualifications:

• Bachelors / Masters' degree in Electrical Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, Chemistry, Physics or equivalent.
• At least 5 years of relevant experience. Applicants with relevant study (Electronics, Microelectronics, Computer Engineering, etc) can be considered.
• Strong communication, industry awareness, and problem-solving skills.
• Highly motivated to succeed, a self-starter who is driven and able to work with others effectively to "get things done".
• Industry experience is a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Service Engineer x 2

Office location : West
Working Location: On board ship

Working days : 5 days (Mon- Friday)

Working hours : 8am - 5pm

Salary : $2,000-$2,800 basic + OT + Allowances: $2,800-$3,000

Interested applicants can also send your resume to

WA:+65 8151 4682 (Ms Angel) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job Description

• Perform servicing, repairs, upgrade, retrofit, maintenance and calibrating level instruments and analyzers out field service attendances job (Shipyard/Anchorage).
• Provide back-end support for the Service team in Local office, oversea service office or oversea authorize service agent.
• Handling pre and post administrative work, generate Service reports and other relevant documents.
• Willing to work overtime, weekends, and be overseas for periods of up to several months.
  
  Requirements:
• Diploma in Engineering or equivalent (Electrical/Electronics/Mechanical/Mechatronics).

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• System Architecture and Design:
  • Design, implement, and maintain scalable and efficient backend systems.
  • Collaborate with cross-functional teams to understand requirements and translate them into technical specifications.
• Backend Development:
  • Write clean, maintainable, and efficient code in languages such as Python, Java, or Node.js.
  • Develop and optimize APIs for seamless integration with front-end applications and third-party services.
• Database Management:
  • Design and optimize database schemas for performance and scalability.
  • Implement and maintain data storage solutions, ensuring data consistency and integrity.
• Cloud Expertise (AWS):
  • Utilize AWS services for building, deploying, and scaling applications.
  • Implement and maintain cloud-based solutions, leveraging AWS technologies.
• Performance Optimization:
  • Identify and address performance bottlenecks in the backend infrastructure.
  • Implement caching and other optimization techniques to enhance system performance.
• Security and Compliance:
  • Implement and maintain security best practices to protect sensitive data.
  • Ensure compliance with relevant industry standards and regulations.
• Monitoring and Troubleshooting:
  • Implement monitoring solutions to track system health and performance.
  • Diagnose and resolve issues promptly to minimize downtime.
• Documentation:
  • Create and maintain technical documentation for code, APIs, and system architecture.
  • Participate in knowledge sharing sessions to promote best practices within the team.

Qualifications:

• Bachelor's or Master's degree in Computer Science, Engineering, or a related field.
• 5+ years of experience in backend development.
• Strong proficiency in one or more backend programming languages (e.g., Python, Java, Node.js).
• Experience with database design and optimization (SQL and/or NoSQL databases).
• Solid understanding of system architecture, microservices, and API design principles.
• Familiarity with cloud platforms, specifically AWS.
• Experience with containerization technologies (Docker, Kubernetes).
• Excellent problem-solving and debugging skills.
• Strong communication and collaboration skills

Responsibilities:
• Facilitate technical transfer of products/projects in assembly and testing, both internally and from customers
• Offer technical support in manufacturing and testing during product assembly
• Provide technical assistance to QC in handling RMA issues
• Support QA in Compliance, Regulatory, Customer & Audit matters with technical expertise

Requirements:
• Possess a minimum Diploma in Electronics Engineering
• Have at least 2 years of relevant experience in the Electronics Manufacturing industry
• Demonstrated technical proficiency in managing product/project manufacturing, transfers, and troubleshooting
• Experience in product/project, PCBA manufacturing, and testing
• Capable of effectively communicating with customers on technical matters
• Experience in a manufacturing environment with ISO13485 & FDA is preferred
• Strong communication and problem-solving skills

In Circuit Test (ICT) Engineer

Tesla Electronics Test and Automation Group (ETAG) is the main point of contact to ensure the highest quality vehicle, silicon and robotics electronics for our customers. Our mission is to develop test automation equipment, architect software automation framework, and provide hardware/software/datainfrastructure for Tesla electronics communities worldwide.

We are seeking a highly motivated ICT engineer to develop ICT programs and support test activities that take place in PBCA suppliers. You will work with both Tesla internal groups as well as suppliers to define and accomplish all test requirements. You will create and manage the test programs from start to finish, perform board grading, GR&R, analyze and present data, perform root cause analysis, and develop corrective actions.

The ideal candidate will be a hands-on problem solver with excellent analytical and organizational skills, who thrives in an environment that encourages and rewards superior work. You should be passionate about innovation and developing new skills, and excited to take on the challenge of contributing to the next generation of engineering tools and systems.

Primary Responsibilities

• Develop ICT programs for 3070 platform.
• Develop and debug advanced digital, I2C, NAND-Tree, mixed signal, advanced boundary scan and silicon nail tests.
• Troubleshoot failures with Dual Stage, shared wired, pneumatic fixtures.
• Develop Block Functional tests on 3070 platform.
• Support vacuum/pneumatic/inline fixtures of panelized boards with throughput multiplier, shared-wired capabilities, dual-well, dual-stage, switch probes and solenoid.
• Perform troubleshooting, identify root cause and implement solution to all line down issues
• Perform GR&R Analysis
• Improve test yield to > 95% target
• Support design team and all cross functional team at tesla to detect coverage holes and improve test coverage on all released test programs
• Support hardware and software change to ICT to accommodate ECOs from design
• Develop and support embedded testing using I2C/UART/USB/CAN/SPI
• Emulate various bus protocols using 3070 digital drivers to control I2C,DDRs etc
• Collaboration between Design/Layout/Manufacturing to deliver specialized tests

Qualifications / Requirements

• 5+ years of experience in In-Circuit Test Engineering on 3070 platform
• BS in EE or related engineering discipline
• Completion of Agilent 3070 Fundamental Training CourseCompletion of Agilent 3070 Advanced Boundary Scan Training Course
• Completion of Agilent 3070 Advanced Digital Training Course
• Strong skills at using electronics lab equipment: 3070 tester, Oscilloscope, Power Supplies, DVM, Logic Analyzer
• Strong Skills at UNIX Shell Script programming, Perl Programming, Python
• Strong skills at DFT analysis
• Strong electronic engineering fundamentals, able to perform root cause failure analysis
• Excellent at verbal and written communication skills
• Excellent at data analysis and presentation
• Great teamwork and interpersonal skills
• Great motivation in best- in-class result delivery
• Able to travel for work

• Service existing account and ability to develop new business.
• Liaise with suppliers to formulate marketing plans and meeting targets.
• Responsible for development of customers to promote products into their project development cycles.
• Service existing account and ability to develop new business.
• Work training will provide by company.
• Self-motivated and team player.
• Strong communication and interpersonal skills.
• Candidate must possess at least Diploma in Engineering (Electronics) or equivalent.
• Compensation commensurate with experience
• Candidate with relevant experience will be considered as Managerial position.
• No working experience candidates welcome to apply
• Entry-level position