This is for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

Role Summary

The role is responsible for delivering and managing cloud security and endpoint security services, assessing policies and rules, safeguarding SaaS applications, data and endpoints. You’ll collaborate with colleagues supporting network and architecture assessment, threat modeling, vulnerability assessment, and security operations. This position supports the Enterprise Security Transformation practice and is focused on engineering secure methods of utilizing cloud infrastructure services and software to improve the overall security posture. Cloud security engineers may instruct other teams on proper coding methods. They may also investigate, create, and recommend innovative technologies or other methods that will enhance the security of cloud-based environments.

Roles and Responsibilities

• Protects system by defining access privileges, control structures, and resources.
• Safeguards information system assets by identifying and solving potential and actual security problems.
• Recognizes problems by identifying abnormalities; reporting violations.
• Determines security violations and inefficiencies by conducting periodic audits.
• Consolidate root cause analysis of past pentest results.
• Upgrades system by implementing and maintaining security controls.
• Require periodic after-hours/weekend support.
• Any other duties assigned by the Team Lead/Solution Architect.

Job Requirements

• 3 years experience in AWS Cloud Security, Security Hub, Guard Duty, Inspector, etc.
• Strong understanding of SSDLC and security frameworks.
• Knowledge in OWASP Security Standards.
• In-depth knowledge of architecture, engineering, and operations of at least one enterprise IDS/IPS/SIEM platform.
• Hands on experience with vulnerability scanning and pentesting tools.
• Hands-on experience analyzing high volumes of logs, network data (e.g. Netflow, FPC), and other attack artifacts in support of incident investigations.
• Experience with identity and access management architectures and solutions including AD, RBAC, SSO, identity lifecycle management.
• Experience in IAM, secrets management, encryption technologies, SaaS services hardening, Kubernetes and container security
• Experience with Linux administration, shell scripting, and open-source security tools.
• Knowledge of security best practices in hardening and protecting cloud environments, networks, servers, endpoints, applications, and databases.
• Certifications in OSCP / CISSP / SANS / Other relevant security certifications.
• Excellent interpersonal skills, team player and independent worker.
• Ability to operate in a fast-paced work environment and deliver under pressure.
• AWS certification will be an added advantage.

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Assurity Trusted Solutions (ATS) is a wholly-owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

Middleware Administration

• Responsible for providing technical services to support environment provisioning, software integration and projects from deployment planning, setup & testing, pre-production readiness to production cutover;
• Hands-on experience on Middleware technologies such as Webserver Apache, IIS, WebLogic, JAVA & .NET based Application server, SSO server, Scheduling and Enterprise Backup;
• Responsible for software upgrades and patching ensuring that the platforms are performing to their potential & meet security compliance;
• Collaborate with Cyber Security and identify solutions for remediation of vulnerabilities in the web and middleware infrastructure;
• Developing and maintaining infrastructure/process logs, documentation, process metrics and capacity trending will be part of the daily activities;
• Participate in 24/7 support by acting as an escalation point for any production issues;
• Responsible for monitoring and optimizing the performance of middleware systems. This may involve diagnosing and resolving issues related to scalability, throughput, latency, and overall system efficiency.
• Work closely with developers, system administrators, and other stakeholders to understand their requirements and provide technical support;
• Stay current with trends and incorporate emerging technology to benefit the platform for on premise and cloud solutions;

Requirements

• At least 3-5 years of Middleware support experience, preferably in large-scale government projects;
• Candidate with strong infrastructure/technical background with knowledge on message-oriented applications in cloud-native architecture will have an advantage;
• Strong understanding of high-availability architectures. Hands-on experience in Clustering, Load Balancing and failover management;
• Work under minimal supervision and take ownership of middleware incidents end to end
• A good working knowledge in UNIX-platform based Web-App administration is a must;
• Good verbal and written communication skills.
• Strong analytical and problem solving skills.
• Good interpersonal and team management skills.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions! The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

IT SECURITY engineer

We are a leading Regional IT and Cyber Security system integrator headquartered in Singapore with a presence in Malaysia & the Philippines. We are hiring talented individuals with a positive attitude to join us. We run SOC, a cybersecurity consultancy, and other professional services to local and regional customers.

Primary Functions:

· Responsible for providing technical assistance and support related to computer systems, hardware, or software

· Responds to queries, run diagnostic programs, isolate the problem, and determines and implements a solution

· To ensure that clients get prompt and quality service

· To document troubleshooting and problem-resolution steps

· To participate and provide knowledge transfer to customers when necessary

· Professional services implementation including but not limited to Linux, Wintel Server, Networking, CyberSecurity project implementation

· Create training manuals, documentation, and knowledge transfer documents

· Install and modify computer & Infrastructure based on in-house best practices

· To implement security control on the system and network devices

· Follow up with customers to ensure the issue has been resolved

· Provide technical assistance and support for queries and issues related to computer systems, Local area network (LAN), Wide area network (WAN), and other hardware/software via phone, email, and/or onsite according to stipulated SLA

Requirements and Skills:

· Diploma holder in IT and other IT Security certifications will be a plus

· Minimum 1-year experience in IT

· Fresh graduates are welcome as we will provide relevant training

· A good understanding of IT network, data storage, network, Wintel Server

· Resourceful, creative, independent, and able to work well in a team

· Required to work on-site when necessary

· Taking ownership of technical issues and working with customers and partners to resolve more advanced issues when necessary.

· Good written and verbal skills; excellent phone and email manners.

· Understanding of TCP/IP, OSI Layer, network security, Internet, DNS, network routing, switching, SMTP email, Linux, and Microsoft Windows

Other Information:

· Office Location: 67 Ayer Rajah Crescent #02-10 S139950

· Working hours: Mon-Friday, 9 am-6 pm

· Depending on the season and customer request may require to work outside working hours

· Monthly basic salary commensurate with qualifications and experiences

· Other benefits such as annual leave, medical, insurance, training opportunities, regional exposures, etc

· Additional performance bonus based on individual contribution towards company strategy and its financial performance

Contact: [email protected]

Job responsibilities

1. Responsible for Physical Design for Full chip/Blocks covering Floor planning, Placement, Area Optimization, Clock tree synthesis, Placement optimizations, Routing, Timing Closure, power network design, Voltage drop analysis, RC extraction, etc.

2. Be a highly-valued member of our start-up like team through excellent collaboration and teamwork with other R&D Engineers.

3. Work with Frontend team to understand the RTL design and drive physical aspects early in design cycle for physical design closure.

Job requirements

1. Bachelor's degree or above, major in Microelectronics / Electronic engineering / Communication engineering and other related fields.

2. More than 3 years working experience in layout and wiring of 40 nm and below technology.

3. Able to independently complete the whole chip P&R process and IR_ Drop, STA, low power inspection.

4. Familiar with TCL or Perl and other scripting languages.

5. Familiar with design flows and EDA tool software.

6. Familiar with Sign-off methodology and the use of EDA tool software in STA / power.

Qualification (s) – BE/ BTech/ MTech/MS/ PhD

Domain - Electronics, Electrical, Computer Engineering or Computer Science Engineering.

Experience – Fresh Graduate Diploma with 0 to 2 years experence including IHL and Singapore Polytechnics Graduate with EEE qualifications.

Job Description –

RTL coding and module-level verification of digital IC circuit blocks

Assist DV engineering team for system-level verification and debug

Assist in creating and maintaining design documentation

Assist in the completion of sign-off GDSII working with DFT and PD engineering teams.

Requirement –

Highly motivated and driven to solve challenging design problems

Able to read and understand the architectural specifications at the sub-

system/chip level

Comprehend the Power-Performance-Area trade-offs in the development of micro-architecture

Proficient with at least one programming language

Preferred experience –

Concentration/major in IC Design

Hands-on experience in digital IC design

Knowledge of industry Protocols – PCIe, NVMe, USB4.0, DDR, AXI, CHI, AHB, MIPI, Display port, Ethernet etc.

Design Techniques – Low-power, UPF, Clock Domain Crossing (CDC),

Booting/Reset Flow

Proficient in a scripting languages – Shell scripting, Python, Tcl, PERL etc.

Responsibilities

• Collaborate with sales and software engineering teams to evaluate and identify optimal cloud solutions for customers.
• Migrate on-premises workload to Cloud Service Providers.
• Plan, design and develop cloud infrastructure necessary to support Anacle's software applications.
• Monitor cloud systems for optimal performance and establishes and monitors best practices, policies, and procedures.
• Identify, analyse, and resolve infrastructure vulnerabilities and application deployment issues.
• Perform vulnerability / security updates and firmware patches.
• Configure and monitor the statuses of backups and perform disaster recovery when required.
• Configure and monitor health statuses of cloud components and respond to monitoring alerts appropriately to ensure continuity in customers' software applications.
• Prepare system architecture documentation.

Essential Skills and Experience

• At least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor’s Degree, Post Graduate Diploma or Professional Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• Experience with cloud technologies – AWS, Azure, or Google Cloud
• Fresh graduates, or anyone with relevant working experience
• Good background in Operating System administration for Linux/Unix and/or Microsoft Windows Server.
• Proficient in networking concepts (e.g., DNS, TCP/IP, and firewalls)
• Hands on experience in managing public cloud including developing and deploying large, scalable production applications on cloud/Iaas, Paas platforms and Containers. Experience with Docker and Kubernetes is a plus.
• Working knowledge of DevOps software development tools and methodologies is an advantage.
• Cloud service providers’ certification will be a plus
• Able to work after office hours depending on project needs
• Able to handle multiple tasks and priorities using effective organisational and time management skills.
• A good team player who is able to work in a fast-paced environment.

We regret that only shortlisted candidates will be notified.

Job Description

As an After-sales Technical Engineer, you will play a crucial role in ensuring customer satisfaction by managing all aspects of after-sales services. This includes coordinating with service engineers, preparing quotes for fault calls and repairs, and overseeing perventive maintenance contracts. You will assist with site surveys for minor projects, gather necessary information to aid the sales team in quoting, suggest site requirements for installations, power, and access, and manage distributors for projects won. Additionally, you will assist in preparing safety-related documents for preventive maintenance contracts (PMC) or minor projects. Your role is essential in maintaining strong relationship with end users and ensuring smooth operations for after-sales services.

Key Responsibilities

1. Manage Service Engineers' Whereabouts.

2. Quote for Fault calls & After Sales Repairs.

3. Prepare preventive Maintenance Contracts.

4. Assist with Site Surveys.

5. Promote Maintenance Contracts.

6. Assist in Quoting for Small Projects.

7. Manage Distributors for Project Wins.

8. Prepare Safety-Related Documents.

Requirements

1. Knowledge of Automatic Door Operator : A Solid understandign of automatic door operatos, their functionality, and maintenance requirements.

2. Possession of a Class Driving License

3. Knowledge of Ironmongery and Door Closers : Familiarity with various ironmongery products, including door closers, and their installation and maintenance.

4. Familiarity with Singapore Building Environment Regulations : A good understanding of the building and safety regulations in Singapore related to doors, door operators and associated hardware.

Responsibilities

• Manage IT infrastructure (including SDWAN and cybersecurity solutions), servers (including VM) and backup solutions (on-premises and cloud)
• Manage various IT assets including user PC, Retail POS and peripherals, printers (including barcode printers), electronic shelf labels, digital signage, mobile phones and tablets etc.
• Manage various SAAS solutions including Microsoft 365
• Problem solving, troubleshooting & user support
• Project management of IT initiatives
• Liaising with various external vendor solution providers
• User training, UAT, user/system documentation and change management.
• Assist in developing and implementing IT policies, protocols, procedures, solutions, and best practices including incident reporting on containment and remediation.
• Be part of project management team on IT initiatives (including system updates and migrations) starting from managing timelines, requirements gathering, specifications, sourcing of solutions, evaluation of solutions, managing implementation process including UAT, user training and system documentation.
• Assist to conduct regular system audits, regular checks on network and data security and testing to detect issues within the IT systems.
• Identify opportunities to improve and update software and systems for higher productivity.

Prerequisites

• Minimum 3 years work experience in IT support, systems administration, or network management, experience in setting up or maintaining basic infrastructure (networking, server setups) is a plus.
• Diploma in Computer Science, Information Technology, Network Engineering, or related field.
• Familiar with configuring and maintaining servers, workstations, and network devices.
• Good analytical, logical and problem-solving skills.
• Team player and able to independently and self-motivated.
• Able to communicate clearly with both technical teams and non-technical staff.

Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society.

Job Summary:

We are seeking a highly skilled and experienced Senior Sales Engineer to lead our front sales activities in the Polymer and Crystallization (POFC) sectors. The ideal candidate will have a strong technical background, excellent communication skills, and a proven track record in sales.

Main Tasks and Key Responsibilities:

• Undertake sales and marketing of Sulzer Polymer and Crystallization Technology in Japan.
• Focal point for Sulzer Crystallization Technology in Southeast Asia.
• Develop and execute sales strategies to achieve sales targets and expand our customer base in the Polymer and Crystallization markets.
• Identify and engage with potential clients, understanding their needs and providing tailored solutions.
• Conduct technical presentations to showcase the benefits and features of Sulzer Polymer and Crystallization Technology.
• Ensure that all technical and commercial specifications are received, clarified and agreed with customer prior to order stage.
• Co-ordinate all proposal activities with Process, and Product-line Management teams to ensure customer requirements are met.
• Deliver sales proposals, negotiate contracts, and close deals.
• Follow up projects monthly and update CRM daily.
• Assist Project Management and Engineering during project execution.
• Stay updated on industry trends, market conditions, and competitor activities.
• Involved in organization of marketing activities such as tradeshow, conference and digital content.
• Any other duties that are assigned by superior.
• 40% travelling is expected.

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

We are proud to be recognized as a Top Employer 2024 in Brazil, China, Germany, Switzerland, the United Kingdom and the United States.

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

• Operate precision CNC turning/milling machine
• Perform CAD/CAM programming
• Interpret Engineering Drawings and Feature of Control Symbols
• Simple setting up of work piece and tooling set up
• Check and maintain machinery daily to ensure functionality
• Able to handle 8" to 12" chuck CNC Turn/Mill Machine, Fanuc control

Requirement

• Proficient in Quality Consciousness with the ability to meet productivity goals
• Must have good interpersonal communication skills and a positive team attitude
• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre

Profile Summary:

The Senior Systems Engineer supports security systems and operations administration, monitoring and maintenance. Monitors security alerts and events. Collects and documents contextual information based on established practices and supports the preparation and publishing of security advisories. Assists with the analysis of security-related information and events, escalation of incidents for validation and remediation.

Able to be alert and vigilant in performing monitoring activities, and is able to analyze and resolve security-related issues critically. He/She communicates clearly in his/her interactions with others and coordinates effectively with his/her team to perform security operations.

Roles & Responsibilities:

Monitor security systems

• Perform non-routine security monitoring activities

• Perform prioritization and allocation of security incidents

• Track security monitoring rules and alerts

• Compile regular reports on the performance of security operations

Maintain security operations

• Assist with the implementation of agreed security system changes and maintenance routines

• Assist with implementation of new security programs

• Support vulnerability, penetration testing and assessments

• Support the development of reports on security penetration testing results

• Recommend security products, services and/or procedures

• Support the alignment of security systems with established service agreement standards

• Support the implementation of new enterprise security architecture, technologies and enhancements

Respond to queries

• Support live response to security issues

• Support investigation of security breaches such as forensic threat investigation

• Support the resolution of security related issues

• Support the simulation of user problems to identify security system drawbacks

• Recommend security system modifications to reduce user problems

Facilitate compliance

• Assist with the implementation security policies, procedures and programs

• Educate users on the security standards and practices

• Identify improvement areas to existing security policies and procedures

• Deliver user training

Optimize security system performance

• Support piloting of new tools, technologies, and processes as well as installation of hardware and software

• Support security system testing and ongoing optimization or changes such as scheduled upgrades and updates

• Maintain documentation of all optimization activities

• Suggest improvements to operational processes, procedure manuals, and documentation

Requirements/ Qualifications:

• Minimum Bachelor in Computer Science or equivalent
• 2-3 years of relevant experience
• Experience in firewall, network scanning or asoc
• Possessed Risk assessment experience
• Required to be on standby with on-call availability with varied shifts including nights, weekends and holidays.
• Experience in AD/ID administration as per best security practices
• Exposure in IM8 or equivalent

JOB DESCRIPTION

We are looking for a Senior Software Development Engineer who will be responsible for developing high-quality software solutions that meet business needs.

Your work will be pivotal in shaping the technical direction of the projects you are involved in and in mentoring junior team members to improve their skills.

You will work directly with the product head, who you will assist as his lead to manage the software design and development of all the product develop by the company or our contract manufacturer.

JOB SCOPE

Software Design and Development:

• Lead the design and implementation of complex software features or systems.
• Write clean, efficient, and maintainable code in programming languages such as C#, C++, Python, or others as appropriate.
• Apply design patterns, algorithms, and best practices to build robust, scalable systems.

Code Review and Mentorship:

• Review code contributions from other developers, ensuring high code quality and best practices.
• Mentor and guide junior engineers, helping them grow technically and professionally.

Collaboration and Problem Solving:

• Work closely with product managers, designers, and other teams to understand user requirements and translate them into technical solutions.
• Troubleshoot complex issues across the software stack and work on performance optimization.

Architecture and Technical Leadership:

• Contribute to the technical architecture of systems, ensuring scalability, security and maintainability.
• Take ownership of major system components, driving their development from inception to production.
• Ensure the codebase follows industry standards and best practices for security, performance, and reliability.

Testing and Quality Assurance:

• Develop unit tests, integration tests and other automated testing procedures to ensure software quality.
• Participate in continuous integration and continuous delivery (CI/CD) processes.

Innovation and Continuous Improvement:

• Stay up-to-date with the latest technology trends, frameworks, and development tools.
• Propose new ideas and techniques to improve software development processes and product quality.

Documentation:

• Document software design, implementation details, and testing procedures.
• Create and maintain technical documentation for internal and external use.

QUALIFICATIONS

Technical Skills:

• Proficient in one or more programming languages such as Java, Python, C++, C#, or JavaScript.
• Solid understanding of software development methodologies (Agile, Scrum, etc.).
• Strong experience in object-oriented design and design patterns.
• Knowledge of databases (SQL, NoSQL) and data modeling.
• Familiarity with cloud platforms (AWS, Azure, Google Cloud) and containerization technologies (Docker, Kubernetes).
• Experience with version control systems like Git.
• Experience with performance tuning and optimization of software systems.

Experience:

• 5+ years of experience in software development.
• Proven track record of delivering high-quality software systems.
• Experience in leading or mentoring teams of software developers.
• Knowledge of full software development lifecycle (SDLC).

Soft Skills:

• Excellent communication skills, both written and verbal.
• Strong analytical and problem-solving skills.
• Ability to work effectively in a fast-paced, collaborative environment.
• Leadership skills with the ability to make decisions and drive technical direction.

Preferred Qualifications:

• Experience in working with microservices and distributed systems.
• Familiarity with DevOps practices and CI/CD pipelines.
• Experience with automated testing frameworks and tools (JUnit, Selenium, etc.).
• Knowledge of Agile methodologies and experience working in Scrum teams.

Job Description:

• Overseeing projects at one or multiple stipulated sites.
• Assist project manager is the execution of the projects.
• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.
• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.
• Monitor and ensure progress of works are carried out according to project specification.
• Design schematic drawing, layout drawing, P&ID drawing.
• Review and check drawing before submit to main contractor.
• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.
• Support project manager in the administration of contract, claim, variation and any dispute arise.
• Raise MR and order material & arrange manpower for necessary works.
• Advise site team for work schedule and technical issues.
• Make sure project is carried out according to schedule.
• Responsible for site supervision and implementation.
• Responsible for ensuring implementing safety measures.

Requirements:
- Minimum diploma
- 3 years or above experiences in ACMV, especially in air-conditioning industry
- Able to use AutoCAD or other related software for ACMV Design
- Able to communicate Fluent in English
- Minimum 3 years in ACMV Sector

We are looking for a highly motivated Software Engineer to join a dynamic wireless game development team. As a member of this core development team, you will work with talented and motivated engineers to develop new and enhanced wireless gaming audio devices and platforms. You will focus on the research of new technologies and solutions, designing and developing new wireless audio gaming devices as well as modifying, debugging and updating existing wireless solutions and products. You will also work with major gaming devices companies to develop firmware for innovative and revolutionary wireless gaming solutions, producing gaming audio devices to meet the needs of gamers worldwide.

Responsibilities:

• Participated in the design, implementation, and testing of firmware/software systems for wireless gaming devices.
• Collaborate and work with gaming device companies to create revolutionary gaming products
• Develop moderately complex software using C language following Merry’s coding standards and in accordance with applicable software development methodologies and release processes
• Perform design and code reviews with develoment team members
• Design and execute unit tests
• Perform technical root cause analysis and outlines corrective actions for given issues
• Prepare and maintain designs and test documentation for gaming solutions
• Understand hardware and software interactions and collaborate with hardware engineers.

Requirements:

• Degree in Electronic/Electrical/Computer Engineering/Computer Science, Software Engineering or related field
• 1-3 years of experience in real-time game product development is preferred.
• Proficiency in C/C++ software development, with strong object oriented design skills.
• Proficiency in embedded software development, including advanced knowledge of multithreading and real-time programming constructs such as message queues, interrupts, and task scheduling.
• Familiarity with other related software programming languages such as C#, Assembly, Python will be an advantage.
• Experience with Arm Cortex based microcontroller is required
• Ability to read and understand electrical schematics
• Extensive knowledge and practical experience using test equipment such as multimeters, oscilloscopes, logic analyzers, etc.
• Good understanding of software development quality management systems.
• Strong quantitative, analytical, and problem-solving skills
• Strong communication skills

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Role responsibilities

• Be part of the team to architect and bring up the new service infrastructure for autonomous prime mover (APM) business.
• Architect and develop large scale IoT system to track live operation data for fleet management to support live fleet operations and monitorings, Provide best data model and services for global route optimization, live monitoring, live map update, vehicle configuration, vehicle maintenance.
• Architect and develop other internal serivces to facilating R& D process.
• Bring up universal auth integration and best security practice.
• Provide common client SDK for backend services.

Required experience

• Bachelor’s or master's degree in computer science or related relevant field.
• 5+ years' experience in backend implementation and .
• Experience with RESTful API framework in Python, Java, or Golang.
• Experience with high performance backend implementation, profiling, and monitoring.
• Experience with data modeling with relational database and NoSQL database.
• Experience with docker, K8s or other containerization techniques.
• Experienced with cloud services.
• Experience with proper CI/CD setup.
• Excellent communication skills.

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

MedTech Catapult is a national initiative for accelerating the development of high-value MedTech projects through an in-house product engineering unit. This productization unit is responsible for supporting the development of technologies through the medical device development cycle to produce full-fledged hardware product systems. The Lead Engineer will report to the Lead, Product Engineering.

Job Responsibilities:

• To provide electronics and instrumentation design capability in support of the design, development, test and manufacture of safety critical products and processes for complex medical technology product solutions.
• To interact closely with engineers from other disciplines to achieve an optimized design within the stipulated project schedule.
• To design and develop PCB and control systems for next generation medical devices.
• To provide operational electronics development, prototype design and testing - both analogue and digital.
• To conduct PCB schematic capture and layout, including component selection and testing.
• To build and test prototypes and document the design and performance of these.
• To create embedded system design and implementation.
• To conduct EMC testing with in-house equipment and through liaison with EMC test house for electrical safety and medical device compliance.
• To support development of intellectual property portfolio in device design and process technology know-how.
• To provide clearly documented records of technical data, decisions, methodologies, calculations and software use in accordance with ISO/FDA quality standards.
• To support the Procurement and Engineering teams for sourcing and defining specifications.
• To conduct error and tolerance sensitivity analysis, reliability analysis, reliability testing and reliability test program design.
• To support CAD-based electro-mechanical integration, at the component level, board level and assembly level.
• Write and review documentations for QMS.
• Interface with external parties (design houses) to communicate product requirements.
• To support other activities for product engineering when required.

Requirements

• MSc/BSc in Electrical Engineering or Computer Engineering.
• >10 years experience in medical devices (e.g. electronic product design).
• Has a good knowledge and understanding of i) Processes of electronic product development and realization, ii) operation and design of electronic systems and circuits; iii) Regulations applying to medical devices, iv) Electronic device operation and fabrication and v) Electronic sensors, measurement systems and instrumentation.
• Experience with PCB design ? digital and analogue.
• Proficient in HDL languages (Verilog, System Verilog).
• Knowledge of ASIC design and sign-off.
• Familiarity with scripting languages like Python, Perl, or C/C++ is a plus.
• Experience with design, development or manufacture of photonic systems or photonics-enabled products is a plus.
• Experience with the use of simulation tools for electronic design is a plus.
• Experience with Medical device ISO standards including ISO9001, IS013485, ISO 14971 and IEC 60601-1 and managing QMS.
• Good collaboration skills, organised and detailed.
• Demonstrate strong interpersonal skills and leadership skill.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• To lead, coordinate and work with cross functional teams such as tools suppliers, equipment engineers, process engineers, facility engineers, environment health and safety officer, contractors for tool placement plan.
• To participate in the evaluation, planning and supervision of projects including testing and commissioning.
• To provide support for new chemical and gas evaluations. Plan and execute specialty gas system release/unhooking up.
• To carry out overall cleanroom capacity modelling and planning, work with manufacturing, process and equipment engineering to ensure requirement is met.
• To review capacity model, understanding the constraints and re-lay the equipment layout in the cleanroom to maximise the cleanroom space usage.
• Management of contractor?s services to ensure fulfilment of contracts terms and agreements.
• Identify opportunities for innovation that are relevant and appropriate to the company business objectives
• To review capital and cashflow requirements, driving activities to improve capital efficiency and reduce cost.

Requirements:

• Degree, Diploma in Engineering (Chemical, Mechanical, Electrical/Electronic, Building Management) or equivalent.
• Degree with 3 years and Diploma with 5 years related experience in
• Manufacturing of Semiconductor, Wafer Fab.
• Able to work in fast-paced environment, proactive and able to work independently with minimum supervision, self-driven and self-motivate to get job done.
• Able to work in a manufacturing, production, cleanroom environment.
• Technical knowledge in Facilities Support System such as ACMV, HVAC, Scrubber, Electrical, Compressed Dry Air, Nitrogen, Hydrogen, Process Cooling Water, Ultra-Pure Warter, Chilled Water, Wastewater Treatment etc.
• Possess Project Management skills.
• Strong understanding of building codes, HSE laws, regulations and best practices and the ability to interpret/translate these into compliance activities
• Proficient in utilizing Excel, Power Point, Project, Word & Visio, AutoCAD.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Project Overview

The AMR IRG is an interdisciplinary community of biologists, engineers, and clinicians from MIT and Singapore, sharing a state-of-the art research facility and united by a commitment to providing a supportive intellectual environment where students and staff can learn, grow, and contribute to solving a pressing societal problem.

The objective of this project is to advance the field of RNA analysis by developing and implementing innovative analytical tools. These tools will be used in a comprehensive study of all forms of RNA -- the ribonucleome -- and the >170 RNA modifications -- the epitranscriptome -- in disease pathobiology, host-pathogen interactions, biomarker development, and therapeutic target discovery.

Responsibilities

The Research Engineer will plan and conduct experiments with the aim of studying the roles of RNA modifications in human immunue diseases. The candidate will work primarily on cell culture, RNA isolation, and chromatography-coupled mass spectrometry analysis. As part of this work, the candidate will prepare results for publication, be a liasion with the AMR IRG community, work with external collaborators, and develop strong experimental and communication skills.

Requirements

• B.S. or M.S. in biochemistry, molecular & cell biology, bioengineering, chemical engineering, or a related field.
• Experience in cell culture, RNA extraction, high-performance liquid chromatography or mass spectrometry are prefered. Strong proficiency in oral and written communication in English. Ability to work well with others and as part of a team.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notifie

At InnoEdge, we work with organisations to protect them from cyber threats. We help detect new unknown cyber threats through research, fortify networks, and defend critical information infrastructures. Based in Singapore, our team consists of cybersecurity experts who use the advanced techniques and technologies to deliver cutting-edge solutions and services.

InnoEdge believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Collaboration is key to our success. We prioritise open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

Responsibilities:

• Design, build and deploy high performance web applications and APIs
• Design client-side and server-side architecture
• Build the front-end of applications through appealing visual design
• Develop and manage well-functioning databases and applications
• Write high-quality code with unit, functional and end-to-end tests
• Perform architectural/technical design, technical prototyping, development, and reviews
• Communicate and negotiate technical solutions and architectural designs with diverse stakeholders
• Lead technical work and integration efforts across teams and products
• Staying abreast of developments in web applications and programming languages
• Provide technical mentorship to junior staff in the team.
• Perform occasional travel to remote sites to assist the support engineer in troubleshooting, or to accompany the product manager as a pre-sales engineer

Requirements

• At least 5 years of hands-on experience in modern web apps using JavaScript/Java/python or relevant experience in a software development team where the product goes into production
• Be a team player with good communication skills
• Demonstrate ability in full stack deployment of web applications
• Experience in designing and implementing RESTful API design
• Experience in the software development using agile SCRUM
• Experience in the following web application framework software / solution stack:

o Java Spring Boot

o ReactJS (knowledge of VueJS would be considered a bonus)

o Python

o Shell scripting

• Experience in the following would be a bonus:

o Git/Github, Elasticsearch, and Kibana

o Experience with threat hunting, Snort, and Arkime domains

o RHEL hardening expertise

o Networking skills, including configuring switches as network brokers

o Docker containers, development of CI/CD pipeline

o Designing and implementing microservices architecture

If you meet these qualifications and are passionate about software development and cyber security, we encourage you to apply for this exciting opportunity. We offer competitive compensation, a comprehensive benefits package, and a collaborative and dynamic work environment.

• Lead projects from a hands-on perspective, managing all physical aspects from the detection reader unit;

• Translate client requirements into detailed detection specifications;

• Design experiments based on given specifications;

• Conduct hands-on measurements, perform analysis and utilise simulations;

• Prepare comprehensive reports summarising project findings, analysis and recommendations

Client Delivery Responsibilities:

• Implement SMX technology at Clients’ facilities;

• Adjust readers (both software and hardware) to align with application requirements;

• Provide initial and periodic training to relevant client employees;

• Deliver technical support to address any issues or concerns;

• Ensure proper maintenance of readers;

• Organise and manage local RSO and any relevant subcontractors;

• Responsible for the development and execute the commercialisation of the tech application from POC to Industrial Roll-out for the SMX detection unit;

• Develop integrated project plans for assigned project(s) with other SMX colleagues from the Marker, Reader and Blockchain teams;

• To study and understand material(s) characteristics & processing methods/systems across various industries/companies;

• Be involved in partaking in all aspects of the projects, from R&D, process engineering, scale up to production, regulatory and quality requirements;

• Responsible for planning, executing and documenting all R&D experiments and tests;

• Co-ordinating experimental activities with subcontractors and clients;

• Writing professional documents for clients, subcontractors and stakeholders;

• Preparing demonstrations to showcase tech applications on demand to stakeholders and potential clients;

• Development of quick POC to showcase solutions for concept demos;

• And any other task or duty which SMX may request.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

In this role you will be accountable for:

• Design and conduct bench-scale test and pilot testing related to the company's separation process technology. Some tests may required rotating shift schedule.
• Develop and review validation protocols for bench-scale test and pilot testing
• Investigate and resolve discrepancies identified during bench-scale test and pilot testing
• Collaborate with process engineers to develop new technologies and improve existing ones
• Work with the sales team to develop commercialization strategies for new technologies
• Stay up-to-date with industry trends and emerging technologies related to separation processes

To succeed in this role, you will need:

• Degree in Chemical engineering, Biochemical engineering, Environmental engineering or related fields
• 2 to 5 years of analytical testing experience in pharmaceutical, petrochemical or flavor and fragrance environment.
• Knowledge of separation processes such as distillation, liquid-Liquid extraction, and crystallization.
• Experience designing and conducting bench-scale tests and pilot testing, as well as experience developing and reviewing validation protocols is an advantage.
• Basic knowledge and experience in analytical chemistry, including experience with various analytical equipment is an advantage.
• Awareness for safe handling of chemicals, potentially dangerous materials and equipment.
• With process engineering background are welcome to apply.

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2023 in Brazil, China, Switzerland, United Kingdom and United States. So come and join our story, starting today!