Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to thermal management of flexible electronics. You will play a key role in designing and fabricating flexible electronic devices, with a specific focus on solving challenges related to overheating and heat dissipation.

Responsibilities:

• Design and fabricate integrated thermal management system for flexible electronics devices, including RF devices.
• Conduct thermal simulations to identify potential thermal issues and optimize the heat dissipation capabilities of the devices.
• Develop and implement innovative thermal management materials, structures, and approaches to address overheating challenges in flexible electronics.
• Explore and evaluate new materials for efficient heat transfer, storage, and dissipation in flexible electronic devices.
• Collaborate with interdisciplinary team members to integrate thermal management solutions into the overall device design and fabrication process.
• Perform experimental characterization of thermal properties and performance of flexible electronic devices using appropriate measurement techniques and equipment, including IR thermal imaging and thermal reflectance system.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

To apply, please submit your application materials, including a cover letter and curriculum vitae.

Review of applications will begin immediately and continue until the position is filled.

Qualifications

Candidate should meet at least 4 criteria from the following list:

• Bachelor’s or Master’s Degree in Electrical Engineering, Chemistry, Materials Science, or a related field with a focus on flexible electronics and thermal management.
• Strong background in thermal management of electronic devices.
• Proficiency in thermal simulation software for analyzing and optimizing thermal performance.
• Knowledge of thermal management techniques and strategies for flexible electronics, including heat dissipation mechanisms and materials.
• Experience in developing and characterizing novel materials for heat transfer, storage, and dissipation in electronic devices.
• Familiarity with experimental techniques for thermal characterization, such as thermal imaging and thermal reflectance.
• Strong problem-solving skills and ability to think critically about thermal management challenges in flexible electronics.
• Excellent written and verbal communication skills, with the ability to present research findings effectively.
• Track record of research publications in reputable scientific journals.

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.
  

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With min. 2 years of relevant experience in similar field.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

About the Role:

This position has responsibilities for the deployment and standardization of key Quality Assurance activities including assurance of product quality, quality planning process, and maintenance of Quality Management System performance. This role will carry out responsibilities in strict adherence to regulatory requirements and applicable standards relevant to medical device, and always act with focus on quality objectives within the organization.

Roles and responsibilities:

• Functional lead for implementation, managing operational effectiveness of Complaint Handling process, trending activities, and analysis of data associated with defined KPIs.
• Responsible for monitoring and implementation escalation process and resolution for late medical device reports caused by late entries by local intake team.
• Analyze and recommend complaints received are reportable within the market, ensure adverse events reported to Authority if needed, with special attention to managing complaint-adverse event with close follow up with manufacturer and/or reporter.
• Execute, coordinate and feedback Field Corrective Action/Recalls with the countries, maintain tracking to monitor field actions in the region to ensure effective resolution or closure. Report Field Corrective Action to Authority if needed.
• Support audit readiness, conduct and prepare for regulatory/external audits as well as internal quality audits to ensure timely execution according to defined schedule.
• Participate of Nonconformity, Corrective and Preventive Actions, Documentations, Supplier Quality across the organization.
• Develop/update procedures for quality system processes to ensure alignment with Olympus global procedures as well as coordinate with other departments that effect Quality Systems.
• Provide training and support to employees concerning quality systems, policies, procedures, and core processes etc.
• Support global and local quality improvement initiatives and transformative projects.
• Execute other tasks and projects, as assigned by Manager.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Bachelor’s degree in related field of engineering, science, or equivalent discipline.
• At least 5 years of experience working in similar position of responsibility in the medical device quality field
• Prior experience in managing quality management system in a medical device environment and quality assurance/regulatory compliance
• Must have knowledge to perform quality audit, certified auditor in ISO13485 or GDPMDS will be a plus.
• Strong knowledge of quality system requirements and medical device regulatory framework
• Meticulous and strong attention to details
• Excellent verbal and written communication skills
• Good problem solving and ability to drive change within organization
• Ability to succeed in a fast-paced, matrixed environment with speed, accuracy and adaptable to meet business need
• Positive attitude and able to work well as team player

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

• LinkedIn - Olympus APAC
• Company website - www.olympus.com.sg

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

Job Description

Your responsibilities:

• You will work include face-to-face and remote selling to both new and existing customers including selling directly to the end consumer/business purchaser or indirectly through various sales channels.
• You will assess customer needs and suggesting appropriate products, services, and/or solutions.
• You will be developing, delivering sales bids, presentations, proposals and conducting product demonstrations.
• You will identify, contact prospective customers, building relationships to generate future sales and repeat business Incumbents matching to this specialization are compensated based on achievement of sales targets.
• You will manage projects / processes, working independently with limited supervision, coach and review the work of lower-level professionals and problems faced are difficult and sometimes complex.
• Living Hitachi energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Your background:

• University degree in Engineering.
• 3 to 5 years of working experience.
• Entry level candidates are welcome to apply.
• Ability to work collaboratively with employees within department and across functions.
• Possesses excellent interpersonal, communication, problem-solving skills and capable of working effectively under own initiative.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a Pharmaceutical Innovation Programme Singapore research project where you will be part of a collaborative team exploring innovative ways of understanding extrusion processing for pharmaceutical drug materials and products using rheological measurements.

Key Responsibilities

In this role, you will characterize mixtures of pharmaceutical excipients and drug materials to develop methodologies for screening hot-melt extrusion formulations and selecting optimal operating conditions using rheology, with the objective of producing amorphous-solid-dispersions. You will validate the developed processing space and operating conditions for extruded pharmaceutical formulations using a lab-scale extruder. In collaboration with researchers at the Singapore-MIT Alliance for Research and Technology (SMART), you will characterize the physical properties and performance of intermediate pharmaceutical drug products. The created methods will be transferred to the industrial partner to enhance their product development process using rheological characterization.

More specific responsibilities include:

• Participate in and manage the research project with Principal Investigator (PI), and the research team members to ensure all project deliverables are met.
• Undertake characterization of pharmaceutical active ingredients, polymeric excipients, and plasticizers for producing amorphous-solid-dispersions.
• Perform lab-scale hot-melt extrusion of pharmaceutical materials to validate predicted processing conditions and product outcomes.
• Collaborate with broader pharmaceutical research team at SMART.
• Design, execute, and interpret experiments independently.
• Author papers in high-quality journals in areas that are related to the research.
• Prepare and deliver reports and presentations for industrial partners
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaise with vendors/suppliers.
• Work independently, as well as within a team.

Job Requirements

• Have deep hands-on experience with at least one of the areas of polymer rheology, extrusion processing, pharmaceutical engineering with small molecules.
• Relevant competence in the areas of wet lab work, analytical instrumentation, material science and formulation
• Have an advanced degree in chemical engineering, mechanical engineering, materials science and engineering, or a related field.
• Knowledge of any of the following will be advantageous: rheology, physical characterisation, crystallisation, polymer melts, extrusion, material physics.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development.
• Proficient in communicating via technical writing and presentations.
• Possess strong analytical and critical thinking skills.
• Show strong initiative and take ownership of work.

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Job Description & Responsibilities:

• Maintenance of Quality Management System ensuring compliance to internal, and international standards and regulatory requirements for medical devices.
• Develop QMS documents in line with business activity of DxD Hub.
• Work with technical team to create quality document related to product design, development and manufacturing, including product test/validation protocols, change management in compliance to applicable regulatory requirements.
• Develop and evaluate medical device regulatory intelligence and maximize opportunities to expedite the registration process within S.E.A region, China and USA. Activities include obtaining and maintaining domestic and regional market access for our innovative products.
• Provide appropriate inputs to assist in defining regulatory strategies and timelines for regulatory submissions for the total product lifecycle for medical devices.
• Compile technical, clinical and production protocols and documentations necessary for new products dossier submission to S.E.A. region, China and USA. regulatory submissions. Liaise with technical team (locally and internationally) on technical information required to prepare submission dossiers. Manage preparation (developing submission content, management of document legalization, and creation of any other documents required for submissions) and maintenance of regulatory submissions and other premarket registrations to acquire appropriate commercial distribution clearances in accordance with regulatory strategic plan.
• Overall responsible for ensuring that medical device files are set up in compliance to regulatory requirement.
• Monitor and communicate new and changing medical device law, guidance regulations in a timely manner. Reviews process change recommendation and assists in implementing new procedures and documentation.
• Ensure that regulatory records are controlled and maintained.
• Train internal and external stakeholders on regulatory data management processes and platforms, regulatory matters and product registration.

Job Requirements:

• Master or Bachelor of Science/Engineering with strong background in biomedical, computer or engineering sciences.
• Possess 3 years or more of working experience in quality assurance and regulatory affairs in medical devices; thorough working knowledge of ISO 13485:2016.
• Good working knowledge in managing QMS in a medical device environment in compliance to ISO 13485:2016.
• Competent in quality assurance methodologies.
• Working knowledge in QA processes for design, development and manufacturing of IVD, SaMD and Integrated Medical Technologies.
• Demonstrated skills in risk management (ISO 14971).
• Knowledge of Health Sciences Authority requirement for IVD product submission.
• Knowledge in regulatory requirements for medical devices in ASEAN, USA and EU.
• Experience with product registration submission and evaluation.
• Experience with maintaining internal regulatory database.
• Experience with Dossier Creation.
• Ability to develop and implement plans for regulatory submission.
• Awareness of applicable workplace environment, health and safety regulations.
• Ability to network and build strategic partnership with good problem solving skills and communication skills.
• Possess leadership and agile mindset.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned from inception to completion within the specified timeframe and of the desired quality.
• Liaise with authorities, consultants and subcontractors.
• Implement architectural and structural works.
• Good communication skills to enhance good team working spirit.

Requirements:

• Experience in management of projects will be advantageous.
• Recognized degree in Civil/Structural Engineering by P.E. Board / BCA.
• Initiative, self-motivated, possess a strong drive with high responsibility and result oriented.
• Preferably 1 - 5 years working experience in Civil & Structural works.
• Experience in engineering software and AutoCad would be an advantage.
• Fresh graduates may apply.

RESPONSIBILITIES

• The role involves planning, coordinating, and implementing standards development projects under the national standardization programme administered by Enterprise Singapore.
• Provide secretariat support to the Technical Committees and Working Groups. This includes preparation of agendas, meeting minutes, report compilation, drafting of standards, etc.
• Engage and coordinate with the industry, academia, and government organizations to facilitate the development, promotion, and review of Singapore Standards and Technical References.
• Organizing key standard launches events and other outreach events.
• Collaborate with key stakeholders to identify, develop, and launch new standards. This includes conducting consultations and ensuring that standards are aligned with industry needs.
• Assist in the industry and technical research for the development of new/review of standards. Conduct verification studies to identify users of the standards.
• Handle inquiries regarding standards in your area of responsibility, ensuring prompt and accurate responses to stakeholders.

Requirements

• Minimum Diploma qualification/ Fresh gradustes are welcome to apply
• Preferably with at least three (3) years of relevant work experience in safety or manufacturing related field
• Preferably with secretariat experience
• Min. 3 years of experience in quality, safety or manufacturing industry is advantageous
• Results-oriented and able to manage and execute projects in a team and independently.
• Possess good interpersonal skills and work well with various stakeholders
• Good writing and communication skills.
• Proficiency in Microsoft Word, Excel, PowerPoint, and other productivity tools

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub).

The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. She/He will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. She/He may also be called upon to advise other developers on integration standards.

Responsibilities:

• You’ll be involved in the development, design, build, testing, and go live phases of multiple integration projects.
• This includes scripting to conform / transform to another systems specifications.
• You will also work with internal teams to continuously improve processes and procedures around deployment of interoperability products that communicate in HIT standards-based formats such as HL7, IHE Profiles, Direct, or SMART on FHIR.
• The Integration Engineer oversees the development of new interfaces and maintain the sandbox environment up to date for application testing.

Requirements:

• Bachelor’s degree in information systems, Computer Science, Engineering, Computer Information Systems, Management Information Systems, or equivalent experience
• 3+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)
• Experience with SQL and relational databases, and communication using secure protocols.
• Ability to work in a team environment alongside developers and deployment teams.
• Utilise engines like Mirth Connect or Rhapsody to have a standard way of integration using both HL7 and DICOM
• Knowledge in developing and configuring Context Launch requirements according to AES 256 standards.
• Assess and customise integrations (HL7 / FHIR / DICOM) based on the project to specific workflow.
• Experience with cloud deployments and/or pipelines, especially Pivotal Cloud Foundry
• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system.
• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)
• Experience integrating with Singapore public hospital technical stack and working with Synapxe are a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

ROLE DESCRIPTION SUMMARY

Join us as a Project Safety Engineer (PSE), where you will be responsible to perform systems safety engineering activities required to develop a safe solution (mainly a software), product or projects. In this role, you will apply your Safety Engineering skills within an interdisciplinary team covering all aspects of a system lifecycle.

KEY ACTIVITIES AND RESPONSIBILITIES

As aProject Safety Engineer, you are accountable for:

As a Project Safety Engineer, you conduct safety engineering activities and produce the required artefacts on time, budget and quality for the allocated project / product.

This includes:

· Conducting a range of activities that identify and address safety hazards and risks by ensuring compliance to legislations, safety policies and the Thales Solution Safety Management System

· Developing and maintaining safety key artefacts: system safety program plans, safety case reports, hazard logs, risk assessments, preliminary system safety assessments and system safety assessments commensurate with the processes, standards and best practices employed by air traffic management domain including fault tree analysis and GSN

· Work closely with the engineering integrated product teams to identify, derive and manage safety requirements, ensure that they are included in the solution design baseline and that their compliance is demonstrated through verification & validation and developing effective mitigations and controls to hazards, procedure and/or training

· Provide timely safety subject matter expertise and engineering support. This includes participating and/or chairing system safety working groups, safety review boards and other safety committees and workshops as required

· Apply Model Based System Engineering tools and modelling methodologies to define system safety functions and requirements as well as managing safety data

· Escalate risks when necessary, provide clear reporting and recommendations

· Work in accordance with Thales processes and practices, and contribute to their improvement

You will also improve the Safety culture within AMS in Singapore by developing, sharing and/or improving safety training material, delivering training as required and pro-active behaviour.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

SKILLS & ABILITIES

· Experience in the Systems Safety Engineering process in a safety critical industry such a Defence, Land Domain, Manufacturing, Vehicles, Railway, Aerospace, Nuclear or Oil & Gas

· Demonstrated experience applying industry best practice system safety analysis and operational risk management techniques and methodologies

· Proven track record of successfully leading the execution of system safety programs

· Familiarity with Eurocontrol Safety Assessment Methodology and its system safety engineering processes including core system safety analysis techniques: FHA, PHA, PSSA, SSA, ETA, FTA, HAZOP, FMECA, RAM, etc.

· Experience and understanding of the V-cycle and how/when the safety engineering activities are interfaced with

· Knowledge of international standards of the safety domain: ARP 4761/4754, DO-278A/178C, ED-153

· Excellent problem solving and decision-making abilities, great and positive attitude, ability to learn

· Adapt easily to change to work in an agile system engineering environment to understand a problem and provide optimal solution options in terms of size, scale and complexity

· Able to travel to Melbourne, Australia (a few weeks a year).

EXPERIENCE

· Minimum 10 years’ experience in a similar or adjacent role

· Familiar with management and engineering tools such as DOORS, Polarion, JIRA and FTA tool

· Experienced in top-down (abstract ideation) and bottom-up (detailed implementation) approaches in engineering solutions and can work with colleagues with these views

· Knows the structure of a software and be able to apply safety techniques

· Team player: harmonising, influencing, negotiating, seeking feedback and mentoring / coaching

· Self-driven and highly motivated, passionate about systems safety engineering and continual process improvement to achieve optimal outcomes for all stakeholders

· Keen to grow product and process knowledge over time, to enhance your capabilities as a System Safety Engineer within the given environment of practice

· Knowledge of ‘design-to-cost’ approach means and can quickly preform a cost-benefit analysis to different methodologies before executing a system engineering task

· Excellent written and oral communication skills in English

QUALIFICATIONS

· Engineering or Computer Science degree

· System Safety degree

DESIRABLE

· Understand and application of RAMS techniques such as RBD, life data analysis, MTTF, MTBF, MTTR, FMECA

· Knowledge of transverse engineering disciplines: human factor and cyber-security and their links with safety engineering

· Experience in the development of software products and projects in a variety of methodologies, with a particular focus on iterative/agile development

· Conduct independent safety assurance activities including auditing

· Experience in the ATM Domain and related standards (ICAO)

· French language knowledge

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

Job Title: Project Engineer (Material Planner) (ID5074)
Location: Paya Lebar
Working Hours: Mon to Thurs 8.30am - 6pm, Fri 8.30am – 5.30pm
Salary: Up to $3800

Job Description:
• Manage project upon tasked.
• Interpret specifications and prepare document for submission.
• Liaise with customers on technical clarifications, submission, approval, schedule, variation claims.
• Prepare training material and conduct switchboard training.
• Prepare material list for switchboards for ordering.

Requirement:
• Degree or Diploma in Electrical Engineering from recognized university.
• At least 2-year relevant experience will be added advantage.
• Possessed reasonable communication skills in English, verbally and written.
• Able to use computer using Microsoft windows software, autocad software.

Working Location: Metropolis

Working Days: Monday to Friday

Working Hours: 9.00am to 6.00pm

Salary: $4,000 to $5,500 per month

Contract Duration: 1 year (with option to extend)

AWS : 1 month for every 12 months continuous service

What’s the role?

The Software Engineer shall be focused on back-end software development of an in-house optimisation product built on Python. Full stack development skillsets (including React experience on front-end) is a bonus, but not a must. You are expected to have a clear understanding of software coding standards, and experience in collaboration with an agile team. You shall be working closely alongside business analysts, designers, architects and software engineers to ensure timely delivery of product backlog items.

Who we are looking for:

• An independent problem-solver who has user centricity in mind when developing solutions.
• Team player and able to collaborate, proactively communicates and shares understanding and experience within a team.
• Clear communicator and able to work in a multicultural/lingual environment.
• Uses initiative and owns their deliverables end-to-end.
• Brings ideas to the table, is inquisitive and excited by new technology.
• Used to working in a flexible, independent manner on a mixture of small unstructured and large structured items.
• Provides regular, considered feedback and regularly strives to improve their own ways of working.

Skills and Experience Required:

• 5+ years of relevant Python Application development experience.
• Creating applications and packages with Python 3.
• Writing reliable unit and end-to-end tests with PyTest.
• Experience working in fast- paced project delivery using AGILE methods.
• Strong software development skills, knowledge of best practices (SOLID, CI/CD, MS DevOps pipelines etc.).
• MS Azure experience e.g. virtual networks, key vaults and storage, security.
• MS SQL backend development experience.
• Experience in developing API’s in python using FastAPI/Django/ Flask.
• Hands on in ADF and Azure Databricks.
• Web development with Python.
• Basic understanding of the WebSockets protocol.
• Knowledge of the OAuth2 and web security.
• Basic knowledge of modern JavaScript, TypeScript, Node.js, Kubernetes containers.
• Data manipulation with Pandas.
• Python: Bokeh visualization, Tornado web framework, asyncio programming, Azure Python API.
• Hashicorp Terraforms (azurerm).
• Kafka Confluent.
• Conda package management.
• ReactJS front end development experience.
• Experience of delivery within a banking or trading environment is a bonus, but not a must.

We are seeking a dedicated andknowledgeable Quality Assurance Engineerwith specialized experience in the oil & gasand semiconductor industries. The idealcandidate will play a crucial role inensuring the quality, reliability, and compliance of our products and processesthrough rigorous testing and ISO audits.

Job Description：

• Develop and implementcomprehensive quality assuranceplans, procedures, and metricstailored for oil & gas andsemiconductor products.Conduct thorough quality inspections,audits, and evaluations to ensureadherence to industry standards andregulatory requirements, includingISO standards.
• Perform root cause analysis and leadcorrective and preventive actions(CAPA) to address quality issues andimprove processes.
• Collaborate closely with engineering,manufacturing, and supply chainteams to implement qualityimprovements and resolve quality-related issues.
• Maintain accurate documentation andrecords of quality tests, inspections,and audits.
• Drive continuous improvementinitiatives in quality assuranceprocesses and methodologies.
• Stay abreast of industry trends,technological advancements, andregulatory changes in the oil & gasand semiconductor sectors.

Requirements:

• Bachelor’s degree or Diploma in Engineering,Quality Assurance, or a related field.
• Proven experience in qualityassurance roles within the oil & gas and semiconductor industries.
• Strong knowledge of ISO standards(e.g., ISO 9001, ISO 14001, ISO 45001)and experience with conducting ISOaudits.
• Proficiency in quality managementtools and methodologies, such as SixSigma, Lean Manufacturing, or TotalQuality Management (TQM).
• Experience in performing quality inspections, audits, and evaluations incompliance with industry regulations.
• Familiarity with automated testingtools and software used in qualityassurance processes.
• Excellent analytical and problem-solving skills, with attention to detailand accuracy.
• Strong communication, interpersonal,and collaboration skills.
• Ability to work effectively in a dynamicand fast-paced environment,managing multiple priorities

Working Location: Metropolis

Working Days: Monday to Friday

Salary: $4,000 to $5,500 per month

Contract Duration: 1 year (with option to extend)

AWS: 1 month for every 12 months continuous service

What’s the role?

The Software Engineer shall be focused on front-end software development of a React based in-house optimisation product. Full stack development capabilities, including Python for back-end are a bonus, but not a must. You are expected to have a clear understanding of software coding standards, and experience in collaboration with an agile team. You shall be working closely alongside business analysts, designers, architects and software engineers to ensure timely delivery of product backlog items.

Key accountabilities include:

• Build web applications using modern tools such as React, Typescript, CSS, Jest, Webpack.
• Experienced with modern JavaScript coding, testing, debugging and automation techniques.
• Excellent analytical, problem-solving, and troubleshooting skills.
• User-centric mindset, you care deeply about performances, accessibility, and the overall user experience.
• A champion of the benefits that CI / CD provide to Product builds.
• Exposure to back-end technologies such as APIs, databases, cloud services, and infrastructure.
• Solution consultation and development in accordance to the enterprise technology principles, methods, standards, and practices.
• Estimation, solution design, detailed technical design, application technical deliverables including code, associated tests and documentation.
• Contribution to functional excellence in terms of definition and maintenance of standards, methods and tools, bringing in best practices from market standard implementations.
• Manage complex integration scenarios and interfaces between on-premise solutions, cloud and legacy systems.
• Pitch in where needed as a valued member of an autonomous, cross-functional team.
• A solid background in Computer Science fundamentals: data structures, algorithms, and deftness at object-oriented design and systems architecture.

Who we are looking for:

• 5+ years of experience in relevant software development and a proven track record of product delivery in an agile team.
• An independent problem-solver who has user centricity in mind when developing solutions.
• Team player and able to collaborate, proactively communicates and shares understanding and experience within a team.
• Clear communicator and able to work in a multicultural/lingual environment.
• Uses initiative and owns their deliverables end-to-end
• Brings ideas to the table, is inquisitive and excited by new technology.
• Used to working in a flexible, independent manner on a mixture of small unstructured and large structured items.
• Provides regular, considered feedback and regularly strives to improve their own ways of working.

Skills Required:

• Functional JavaScript
• React
• Redux
• TypeScript
• Styled Components
• React-testing-library
• REST APIs
• AG Grid
• Azure DevOps/VSTS experience – creating/operating CI/CD build and release pipelines.
• Experience with Cloud-based software, specifically Microsoft Azure.
• Experience of Agile Project Delivery techniques (e.g. Scrum, Kanban).
• Good knowledge and practical experience of software design principles and basic patterns.
• Experience and knowledge of auto software deployment technologies (e.g. Jenkins, Docker, Git).
• Analytical, troubleshooting and problem-solving skills.

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub). The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. She/He will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. She/He may also be called upon to advise other developers on integration standards.

Responsibilities:

• You’ll be involved in the development, design, build, testing, and go live phases of multiple integration projects.
• This includes scripting to conform / transform to another systems specifications.
• You will also work with internal teams to continuously improve processes and procedures around deployment of interoperability products that communicate in HIT standards-based formats such as HL7, IHE Profiles, Direct, or SMART on FHIR.
• The Integration Engineer oversees the development of new interfaces and maintain the sandbox environment up to date for application testing.

Requirements:

• Bachelor’s degree in information systems, Computer Science, Engineering, Computer Information Systems, Management Information Systems, or equivalent experience
• 5+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)
• Experience with SQL and relational databases, and communication using secure protocols.
• Ability to work in a team environment alongside developers and deployment teams.
• Utilise engines like Mirth Connect or Rhapsody to have a standard way of integration using both HL7 and DICOM
• Knowledge in developing and configuring Context Launch requirements according to AES 256 standards.
• Assess and customise integrations (HL7 / FHIR / DICOM) based on the project to specific workflow.
• Experience with cloud deployments and/or pipelines, especially Pivotal Cloud Foundry
• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system.
• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)
• Experience integrating with Singapore public hospital technical stack and working with Synapxe are a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Liaise and co-ordinate with consultants, clients and subcontractor on Civil, Architectural & M&E works.
• To assist and prepare method statement, drawings, work progress and other relevant documents for M&E related works with project teams.
• Attend regular site meeting with consultants.
• Supervise all M&E related works on site.

Requirements:

• Diploma / Degree in Mechanical / Electrical Engineering.
• 2-3 years experience in Mechanical / Electrical.
• Fresh graduate may apply.
• Experience in engineering softwares and AutoCAD.

This role will report to the Performance Manager.

Main Responsibilities

Subject Matter Expert / Design & Solutions

• Conduct detailed performance analysis of HVAC systems to identify inefficiencies and areas for improvement.
• Develop and implement energy simulation techniques to evaluate system performance.
• Perform energy audits and assess compliance with energy standards and regulations.
• Generate performance reports and provide recommendations for system upgrades or modifications.
• Monitor and analyse HVAC plant energy consumption data to identify trends and propose solutions.
• Monitor and report on the effectiveness of energy initiatives, including cost savings and performance improvements.
• Analyse chiller data and performance to ensure the reliability and consistent COP (kW/RT)
• Perform overhauling and annual shutdown of various brands of Chillers as part of regular/predictive maintenance and improving chiller efficiency
• Conduct detailed assessment and identify the root cause of poor performance in chillers and suggest potential rectifications to resolve the issue
• Keep Service Sustainability, Customer Support teams and other relevant stakeholders informed on outstanding client issues and recommend system enhancements, upgrades, and/or repairs
• Stay up to date with the latest HVAC technologies, industry standards, and best practices

Projects & Operations

• Coordinate with project managers and other stakeholders to ensure project objectives are met
• Conduct testing and commissioning for projects
• Anticipate issues and prepare mitigation measures as required to achieve goals
• Finetune the bbp installed system without disruptions to clients’ operations
• Perform review/analysis, diagnostics and troubleshooting of any energy performance issues
• Ensure bbp’s energy efficiency system performs to expectations after installation and testing within the project timeline
• Contractor liaison, engagement/provide requirements

Others

• Evaluate / review selection of maintenance / repair subcontractors
• Review testing and certification reports
• Safety and Compliance: Ensure a safe work environment and compliance with relevant standards.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

We are looking for an experienced AI Engineer with solid knowledge and experience in developing AI/ML systems, to accelerate incubation and delivery of new AI/ML based media and business capabilities.

You will be working with other engineers in the team to research, experiment, and build AL/ML models & algorithms utilizing various of data sources. You will be one of the problem solvers who utilises technology to address complex business needs.

The role reports to the AI Products & Solutions Lead and will work closely with other product teams within the digital department.

Responsibilities

• Implement scalable and robust AI/ML systems computing on large volumes of datasets using a variety of open source and proprietary Data Science technologies.
• Implement and integrate system components for service orchestration, scheduling, job status monitoring, model performance monitoring, failure recovery, APIs, and any other components required for a robust and reliable Machine Learning system spanning on-premises and cloud environments.
• Develop and implement data processing jobs and pipelines to provide standard, continuous, and scalable data input for future analytics and modelling needs.
• Write and automate unit, functional, integration and performance tests in a Continuous Integration environment.
• Work closely with stakeholders to ensure high standards of data governance during implementation.

• Bachelor's degree in Computer Science, Computer Engineering or related fields.
• 5+ years of software development experience with 3+ years in developing end-to-end AI/ML applications.
• Excellence in algorithms, data structure, discrete math, and distributed computing.
• Full stack experience in data collection, aggregation, analysis, visualization, and monitoring of AI/ML products (MLOps).
• Experience with basic software development skills, such as agile methodologies, testing, version control, and CI/CD.
• Proficiency in Programming languages (Python, Java, etc).
• Experience with Cloud Infrastructure, Kubernetes, Docker, GPU, TensorFlow, Pytorch & other Opensource AI/ML framework and libraries.
• Experience with SQL and/or NoSQL database.
• Experience working in Media & Entertainment industry is a strong plus.
• Self-directed, ability to work independently and research innovative solutions to technical and business problems.

Job Description:

• Developing PLC & HMI/ SCADA program based on customer specification
• Integration of third-party equipment and components into software design. Example: data communication, barcode scanner, motion control, transducer, vision system and etc...
• Liaise with In-house, Design and Project Engineer for the software development and execution of the project
• Documentation of operation manual for the project.
• Maintain proper project documentation.
• Manage and execute assigned projects within schedule

Job Requirements:

• Min. Diploma in Mechatronic/Robotics/Electronics/Automation Control or equivalent
• Min. 1 years relevant experience in Automation Control engineer or programmer
• New Grad without experience but have strong interest to develop a career in this field may also apply
• Self-motivated, creative thinking, strong analytical skills
• Able to perform assigned tasks independently or through team activities
• Experience with 2D/3D vision system will be an added advantage
• Knowledge of C, C++, C#, .NET, MVVM, WPF, Python is an added advantage
• Ability to understand mechanical and electrical drawings.
• Experienced in developing motion control programs or/and robot programs
• Experienced in HMI UI design, servo systems, motion control
• Experienced in PLC programming (Omron, Siemen, Mitsubishi, and Programming language Ladder, Structure Text and Function Block)

• Provide necessary general engineering and technical support to various departments.
• Assist in creation of technical drawings, plans and diagrams using CAD software.
• Prepare lifting plans, engineering studies, method statements according to requirements of the lifting operations.
• Coordinate and correspond with the clients for their lifting requirements.

Job Description:

DxD Hub is seeking an experienced UI/UX engineer for our product development for our Digital Diagnostics Team. In this role, you will play a crucial role in driving the user interface and experience of digital health products in collaboration with external partners (especially clinicians). The ideal candidate should possess a strong usability engineering skills and able to translate expectation to visualisation and handover to technical team.

Job Responsibilities:

• Design innovative app experiences based on the understanding of personas, their behaviors and needs as well as competitive market insights.
• Collaborate with partners to understand their goals and propose a user-centric approach to improve digital services.
• Communicate design ideas through tools such as sketches, user journeys, storyboards, mind maps, wireframes, and clickable prototypes.
• Drive user research activities such as, usability testing, user interviews, surveys, and translate research findings into meaningful recommendations.
• Guide all aspects of UX including design research, design strategy, user experience, usability testing, interaction/content design and prototyping.
• Work closely with Product Owners to ensure all design work meets user needs and business requirements.
• Create a design-minded environment and build design capabilities amongst project team members.

Job Requirements:

• Degree or Diploma in Human Computer Interactions, Design, Psychology, Computer Science or related fields
• 1-2 years’ experience in user-centered design with hands on experience building visual identities for web and mobile app UI.
• Experience in delivering wireframes, UX flows, mockups, interactive prototypes, design specifications, and final assets.
• Experience with design/wireframing software such as: Figma, Sketch, Adobe suite, or equivalent.
• Strong portfolio showcasing your best design work for web and mobile.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.