• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 8 years of civil engineering experience
• 3 years of experience in major construction works likes deep excavation, drainage, pipe jacking, ground improvement, supervision & installation of monitoring instruments and collating of monitoring data.
• Degree in Civil Engineering recognized by PEB
• Accredited as a RE with IES
• Able to perform shift work.

ELECTRICAL DRAFTER ENGINEER

· Produce accurate 2D Auto CAD drawing according to project requirement.

· On-site or Off-site support to the project team to co-ordinate and follow through with main contractors/ client’s requirement and amendments

· Update drawings for submission and approval

· Single line Diagram, lighting, lighting protection, earthing & cable routing, equipment and switch room layout etc.

· Amend redraw plan/section base on client’s comments

· Perform other duties as assigned

REQUIREMENT

· Candidate must possess at least a Nitec / Higher Nitec / Diploma in Electrical Engineering or equivalent; or Certificate in AutoCAD Drafting

· At least 2 years of relevant experience in electrical drafting

· Able to work independently and diligently under stress and pressure

· Good communication skills, team player, meticulous, independent and self-motivated

· Engineering or equivalent; or Certificate in AutoCAD Drafting

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

Job Description & Requirements

The position will be responsible for the deployment and support of the enterprise-wide network system infrastructure and interconnected technologies that require day-to-day support and administration in order to obtain maximum availability of systems and optimal network performance.

Responsibilities :

• Administer, monitor, maintain and optimize WAN, LAN and Wi-Fi networks for optimal performance and maximum availability.
• Ensure all the Network devices (Routers, Switches, Load Balancers, Wireless LAN Controllers) & Firewalls remains in good working condition.
• Configure, troubleshoot, and resolve any issues within Network and Security areas, including performance and capacity issues.
• Respond to production issues speedily, including bringing up the defective hardware during and after office hours.
• Taking the lead in updating & documenting all Network configuration, Firmware, Network diagrams and all the cabling for all the End-Devices.
• Provide technical support and consultation, conduct procurement, and perform project management activities for enhancement and the change in Network and Security configuration.
• Define processes to manage the Network infrastructure; identify and drive service improvement initiatives to improve overall network operation quality and productivity.
• Work with vendor to manage and coordinate the infrastructure security reviews, assessments and penetration tests.
• Work with the cyber security team in the remediation of network related vulnerabilities.
• Manage network related projects as and when required.
• Any other related duties/tasks as assigned by immediate supervisor or Director, Information Technology.

Requirements :

• Diploma / Bachelor’s degree (or higher) in Electrical Engineering or Computer Science / Information Technology or relevant discipline.
• At least 5 years of relevant working experience in network administration.
• Preferably Cisco Certified Network Associate (CCNA) certified.
• Having any Security certification is advantageous.
• Familiar with the following Network configuration & setup: BGP, OSPF, MPLS, VPN Tunnel (GRE & IPSec), VRF, HSRP / VRRP, QoS, IP Flow Top Talkers, IP Accounting, ARP, NAT, PAT, Port Channel, VXLAN, Policy Routing.
• Familiar with Security Appliances such as Cisco FirePower, Fortinet Firewall and/or Palo Alto.
• Familiar with NMS setup and configuration such as NetFlow, MRTG / PRTG and SolarWinds.
• Familiar with F5 Networks / A10 Load Balancers devices.
• Have experience with Security Remediation Audit and RFP / RFQ Tender requirements.
• A motivated person with the ability to work independently, a good team player and goal oriented individual.
• Good interpersonal, communication and analytical skills.

Interested applicants are requested to write in with detailed resume indicating current and expected salary and availability.

We regret only shortlisted candidates will be notified.

The Job

1. Data Protection Compliance:

• Assist in reviewing, updating, and maintaining data protection policies and procedures.
• Ensure organizational practices comply with data protection regulations (e.g., GDPR, CCPA).

2. Data Inventory and Mapping:

• Help update and maintain records of processing activities (ROPAs).
• Assist in mapping data flows to identify risks and gaps.

3. Data Protection Impact Assessments (DPIAs):

• Support in conducting Data Protection Impact Assessments (DPIAs) for new or existing processes.

4. Training and Awareness:

• Help coordinate data protection training sessions for employees.
• Develop awareness materials on privacy and data security practices.

5. Incident Response:

• Assist in responding to data breaches, including investigation, documentation, and reporting.
• Ensure incidents are escalated to appropriate teams when necessary.

6. Auditing and Monitoring:

• Assist in internal audits and drills to identify data protection compliance gaps.
• Provide administrative support for external audits.

7. General Administrative Tasks:

• Maintain accurate records of all data protection-related activities.
• Prepare reports and presentations as required.

Any other tasks as assigned by ADPO/DPO.

The Person

• Minimum Diploma in a relevant discipline, preferably Degree in any discipline.
• Preferably undergone Fundamentals of PDPA and/or Practitioner Certification in Personal Data Protection.
• Experience in compliance/audits especially data protection compliance.

Job Summary

We are seeking a highly skilled Devops Engineer (GCP) to join our team for scalability while ensuring the seamless functioning of our production environments. This is an opportunity to work in a fast-paced, dynamic environment and make a significant impact.

Mandatory Skill-set

• Has 2+ years of experience in cloud computing, specifically with GCP;
• Proven experience in cloud infrastructure design, cloud migStrong understanding of GCP services like Compute Engine, App Engine, Kubernetes Engine, Cloud Functions, Cloud Storage, BigQuery, etc;
• Proficiency in programming languages such as Java, Python, or C++ for application development and scripting;
• Familiarity with DevOps tools and practices, including CI/CD pipelines and container orchestration tools (e.g., Kubernetes).ration, and application development on Google Cloud PlatfStrong analytical and problem-solving skills with the ability to identify issues and provide effective solutions;
• Ability to troubleshoot and resolve cloud infrastructure and application performance issues;
• Experience working within Agile development teams and using version control systems like Git for collaboration;
• Knowledge of Agile methodologies such as Scrum or Kanban;
• Strong communication and interpersonal skills to work effectively with both technical and non-technical teams;
• Ability to explain complex technical concepts to non-technical stakeholders;
• Detail-oriented, with excellent time management and organizational skills.

Desired Skill-set

• Google Cloud Certified – Professional Cloud Developer or Cloud Architect;
• Experience working with containerized applications and Kubernetes;
• Knowledge of cloud security best practices and implementation, including IAM, encryption, and networking security;
• Understanding of compliance frameworks (e.g., GDPR, HIPAA, PCI-DSS) and the ability to implement these within the cloud environment.

Responsibilities

• Design and implement scalable, secure, and efficient cloud systems on Google Cloud Platform (GCP);
• Manage and optimize cloud infrastructure to meet the needs of the business while ensuring high performance, reliability, and availability;
• Develop and deploy cloud-native applications using GCP services such as Compute Engine, App Engine, Kubernetes Engine, Cloud Functions, and Cloud Storage;
• that applications are designed with scalability, resilience, and cost-effectiveness in mind;
• Plan and execute the migration of on-premises systems to GCP, ensuring minimal downtime and a seamless transition;
• Optimize resources during the migration process to achieve efficiency and cost savings;
• Implement security measures, including Identity and Access Management (IAM), firewalls, and encryption protocols to ensure data protection;
• Ensure that GCP deployments comply with internal policies, industry standards, and regulatory requirements (e.g., GDPR, HIPAA);
• Work closely with product teams, business units, and other stakeholders to gather requirements and provide cloud-based technical solutions;
• Collaborate on the design and development of new cloud-based applications or services to meet business objectives;
• Continuously monitor cloud infrastructure and applications using tools like GCP Cloud Monitoring, Stackdriver, and Cloud Logging to ensure optimal performance;
• Identify areas for improvement in terms of resource utilization, cost management, and system reliability;
• Stay up-to-date with the latest developments in GCP services, tools, and best practices;
• Drive continuous improvement in cloud architectures, application performance, and cloud deployment methodologies.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE's website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Job Description & Requirements

• Provides hands on technical expertise (SME) , senior level technical guidance to application team as necessary
• Assist and respond promptly to incident, investigate and provide temporary/permanent resolution to incidents escalated with respect to Middleware/ Operating system/ database performance, capacity, resiliency , stability,replication and other key aspects
• Researching and recommending solution that best meet business needs and enterprise operational requirements
• Provide technical support to application development teams
• Evaluate release of Middleware, Operating system, Database components and its tools to ensure entire environment is complaint with no/minimal impact

Qualifications

Understanding of protocols like HTTP/HTTPS/FTP/SFTP/AS2 etc

Programing experience in Java

Write Unix Shell & Bash Scripting

Familiarity with Linux operating system and commands

Capability to troubleshoot integration issues efficiently

Job Responsibilities:

• Create specifications and define software architecture for embedded systems.
• Design and develop MCU based firmware for embedded system.
• Design and develop middleware, application and GUI in Windows, embedded Linux or other environments.
• Work closely with other engineers to analyze and resolve bugs.
• Analyze performance bottleneck and optimize product quality and throughput.

Job Requirements:

• Master or degree in computer science, computer engineering or electronic engineering, or equivalent
• At least 5 years direct relevant experience for the senior engineer position.
• Fresh graduates with relevant knowledge or experience are welcome.
• Experience in MCU firmware or embedded Linux development.
• Firmware development experience with STM32 family is a plus.
• Good understanding in hardware and ability to develop low level codes.
• Strong programming experience in C/C++. Rich experience on embedded software development is a plus.
• Good knowledge in software debugging and performance optimization.
• Good experience in embedded systems based on ARM Cortex-M or Cortex-A series processors.
• Familiar with ISO13485 or IEC 62304 design process, source version control and bug tracking system is an advantage.
• Independent and resourceful.

Job Description

• 5 years relevant working experience in Water Treatment industries is preferable.

• Experienced in the design of water treatment plants (desalination, potable water, demineralization) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.), experience in Demineralization System will be added advantage.

• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/EDI), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager & Lead Engineer, Process on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S and Drafting) on development of engineering deliverable on a timely basis.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

Requirement:

• Degree in Chemical Engineering or Environmental.

• Prior experience of at least 5 years in process design. Experience in UltraPure Water (UPW) will be added advantage.

• Ability to establish and maintain appropriate relationships with team members.

• Able to work independently with minimal supervision

• Hand on Experience with ETL, Informatica and writing Teradata SQL.
• Should be expert in Teradata Utilities
• Should be good in Unix Shell scripting
• Sound knowledge of financial service logical data model (Teradata FSLDM)
• Work closely with Business Users to convert the business requirement into Technical
• Requirement.
• Should be able to create Mapping documents for FSLDM and downstream data mart
• Must have work with ETL, preferably in Datastage
• Prepare Test cases for Unit Testing/SIT/Regression
• Design and document development standards
• Sound knowledge of Core Banking Domain
• Should have knowledge on Data warehouse Concepts
• Hands on experience in Control M Scheduling tool
• User and Client meetings
• Should be able to take ownership and deliver independently

Required Technical and Professional Expertise

• Experience in Teradata SQL Query Writing
• Hands on experience in Unix and shell scripts
• Experience in Teradata Utilities(BTEQ, Fast Load, Multi Load)
• Experience in FSLDM
• Control M
• Demonstrate string SQL skills and performance tunning
• Prefer Banking Domain
• Willingness to provide L2/L3 application support.
• Willingness to support on production issues on a 24/7 rotational basis.
• Willingness to support weekend and public holidays.

We are seeking a highly skilled and motivated Red Hat Linux Engineer with strong cloud experience to join our IT Infrastructure team. The ideal candidate will be responsible for the design, implementation, and administration of Red Hat Enterprise Linux (RHEL) environments, with a focus on integrating cloud-based solutions. This role requires expertise in RHEL, cloud platforms (AWS, Azure, or Google Cloud), automation tools, and a strong understanding of network and security principles.

Key Responsibilities:

• RHEL Administration:Manage and maintain Red Hat Enterprise Linux systems, including installation, configuration, upgrades, and patching.
  Monitor system performance and ensure system availability and reliability.
  Troubleshoot and resolve issues related to the Linux environment.
  
• Cloud Integration:Deploy, manage, and optimize cloud infrastructure on platforms such as AWS, Azure, or Google Cloud.
  Migrate workloads from on-premise to cloud environments.
  Implement hybrid cloud strategies, ensuring smooth integration between on-premise and cloud systems.
  
• Automation & Scripting:Develop and maintain automation scripts using tools like Ansible, Bash, or Python to streamline operational tasks.
  Implement Infrastructure-as-Code (IaC) for managing cloud resources (Terraform, CloudFormation, etc.).
  
• Security & Compliance:Ensure Linux environments are secure by implementing best practices, monitoring, and addressing vulnerabilities.
  Configure and manage firewalls, security policies, and user access in Linux and cloud environments.
  Ensure compliance with industry standards and company policies for data protection and system integrity.
  
• Backup & Recovery:Design and implement disaster recovery solutions for critical systems and applications.
  Ensure regular backups are performed, validated, and ready for restoration in case of failure.
  
• Collaboration & Support:Work closely with development, operations, and security teams to support application deployment and infrastructure needs.
  Provide Tier 2/3 support for system issues and outages.
  Assist in the creation of documentation, including design specifications, procedures, and user guides.

Required Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 3+ years of hands-on experience with Red Hat Enterprise Linux administration.
• Strong experience with cloud platforms (AWS, Azure, or Google Cloud).
• Proficiency in automation and configuration management tools (e.g., Ansible, Puppet, Chef).
• Solid scripting skills (Bash, Python, or Perl).
• Experience with containerization technologies (Docker, Kubernetes) is a plus.
• Understanding of networking, firewalls, VPNs, DNS, and other related services.
• Familiarity with security tools and protocols in a Linux and cloud environment.

Preferred Qualifications:

• Red Hat Certified Engineer (RHCE) or Red Hat Certified System Administrator (RHCSA).
• Certifications in cloud technologies (AWS Certified SysOps Administrator, Azure Administrator, etc.).
• Experience with Infrastructure as Code (Terraform, CloudFormation).
• Knowledge of CI/CD pipelines and DevOps methodologies.

Job Description

• Perform system configuration, testing, and commissioning of integrated audiovisual and videoconferencing solutions
• Collaborate with inhouse teams and engineers from different manufactures like Samsung, BOSE, Crestron, Extron, Poly, Logitech, etc to deliver fully integrated solutions for venues like meeting rooms, lecture halls, experience centres, command centres, auditoriums, ballrooms, etc.
• Analyse schematic drawings to understand technical and functional requirements for each solution implement
• Conduct end-user training sessions on the implemented solutions
• Assist in providing after sales services and support

Requirements

• ITE/ Diploma in IT, Engineering, or Audio Visual related fields
• Certification in CTI-P101, CTI-P201
• Must have minimum 2 years of experience in System configuration, Testing & Commissioning for Audio Visual solution
• Experience in Crestron, Extron, AMX, Kramer automation programming
• Experience in some of the products like Videowall, LED & LCD Display, Digital Sound Processor (DSP), Amplifier, Speaker, videoconferencing, Audio Visual Switches
• Experience in similar renowned AV brands like Samsung, Crestron, Extron, BOSE, Ev, Poly, Cisco, Logitech, etc

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field with minimum of 6 years experience

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field with minimum of 10 years experience

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Job scope:

1. Assist mechanical and electrical engineers for system assembly, installation, commissioning, and troubleshooting.

2. Carry work assembly and installation according to design requirements, schematics, drawings or working instructions.

3. Undertake ad-hoc responsibilities assigned.

Knowledge, skills and experience:

1. NITEC/Diploma in Mechatronics/Mechanical/Electrical/Electronic engineering

2. Knowledge on mechanical and electrical principles.

3. Able to comprehend electrical and electronic schematics and mechanical drawings.

4. Hands-on experience is a must, e.g. soldering, wiring, M&E assemblies, panel wiring, grinding, drilling.

5. Able to work with minimal supervision.

Expectations:

1. Team player.

2. Attention to details

3. Strong in analytical thinking and problem-solving skills

4. Be responsible and self-disciplined.

5. Assure quality and accuracy of work.

6. Maintain tidiness, cleanliness and safety of co-working workspaces.

Job Purpose

The Executive/Senior Engineer is responsible for preparing, tracking and executing the workplan of Maintenance and Engineering (M&E) Group. The core focus of the job will be on ensuring quality and consistency across maintenance branches.

Duties and Responsibilities

• Develop, implement and improve processes for M&E group to ensure regulatory compliance and operational excellence.
• Prepare, implement and track yearly M&E Group work plan
• Conduct joint investigation with branch engineers for fault findings and incident investigation
• Coordinate, collate and prepare performance and maintenance reports across the branches for submission to the authorities
• Facilitate audits conducted by internal auditors, the authority and other external agencies
• Facilitate and coordinate external projects with LTA an/or external parties
• Maybe required to perform work during night hours and over weekends and public holidays

Qualifications and Work Experience

• Degree in Engineering
• Prior work experience in railway industry or process quality and planning will be advantageous
• Knowledge of Quality Management standards will be advantageous

Skills and Competencies

• Proficiency in Microsoft Office Suite
• Experience with automation software such as Power Automate is desired
• Basic coding skills (VBA, R, or Python) will be advantages

The Mechanical and Electrical (M&E) Engineer is responsible for designing, coordinating, and overseeing the mechanical and electrical systems in construction or industrial projects. This role involves working closely with other engineers, architects, contractors, and project managers to ensure that mechanical and electrical systems are designed and implemented in compliance with relevant standards, are cost-effective, and meet the functional and safety requirements of the project.

1. Design and develop mechanical and electrical systems for projects, including HVAC, lighting, power distribution, and plumbing systems.
2. Collaborate with architects and civil engineers to integrate M&E systems seamlessly into the overall project design.
3. Ensure that all designs comply with local regulations, building codes, and industry standards.
4. Prepare technical specifications, drawings, and plans for mechanical and electrical installations.
5. Oversee the installation of mechanical and electrical systems, ensuring they are completed on time, within budget, and according to specifications.
6. Ensure that installation is carried out safely, adhering to safety standards and risk management protocols.
7. Conduct testing and commissioning of M&E systems to ensure they are fully operational and meet performance standards.
8. Manage the M&E components of the project, including scheduling, budgeting, and coordinating with subcontractors and vendors.
9. Monitor and supervise on-site activities to ensure compliance with M&E specifications and quality standards.
10. Collaborate with project managers and other engineers to ensure efficient project execution.
11. Provide ongoing technical support during and after the construction phase, ensuring the mechanical and electrical systems are functioning efficiently.
12. Troubleshoot and resolve issues related to mechanical and electrical systems.
13. Ensure that preventive maintenance schedules are established and followed.
14. Prepare and maintain accurate records of designs, technical specifications, calculations, and installation activities.
15. Report project progress to senior management, identifying any potential delays or issues and recommending solutions.

Requirement

• A Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related discipline.
• At least 3-5 years of experience in mechanical and electrical engineering, with a focus on construction, building services, or industrial projects.
• Must have Singapore's experience in HDB projects
• Holding a Professional Engineering (PE) certification or other relevant qualifications in M&E engineering (e.g., CEng, LEED accreditation) is a plus.
• Only Singaporeans and Permanent Resident need apply.

The Mechanical and Electrical (M&E) Engineer is responsible for designing, coordinating, and overseeing the mechanical and electrical systems in construction or industrial projects. This role involves working closely with other engineers, architects, contractors, and project managers to ensure that mechanical and electrical systems are designed and implemented in compliance with relevant standards, are cost-effective, and meet the functional and safety requirements of the project.

1. Design and develop mechanical and electrical systems for projects, including HVAC, lighting, power distribution, and plumbing systems.
2. Collaborate with architects and civil engineers to integrate M&E systems seamlessly into the overall project design.
3. Ensure that all designs comply with local regulations, building codes, and industry standards.
4. Prepare technical specifications, drawings, and plans for mechanical and electrical installations.
5. Oversee the installation of mechanical and electrical systems, ensuring they are completed on time, within budget, and according to specifications.
6. Ensure that installation is carried out safely, adhering to safety standards and risk management protocols.
7. Conduct testing and commissioning of M&E systems to ensure they are fully operational and meet performance standards.
8. Manage the M&E components of the project, including scheduling, budgeting, and coordinating with subcontractors and vendors.
9. Monitor and supervise on-site activities to ensure compliance with M&E specifications and quality standards.
10. Collaborate with project managers and other engineers to ensure efficient project execution.
11. Provide ongoing technical support during and after the construction phase, ensuring the mechanical and electrical systems are functioning efficiently.
12. Troubleshoot and resolve issues related to mechanical and electrical systems.
13. Ensure that preventive maintenance schedules are established and followed.
14. Prepare and maintain accurate records of designs, technical specifications, calculations, and installation activities.
15. Report project progress to senior management, identifying any potential delays or issues and recommending solutions.

Requirement

• A Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related discipline.
• At least 3-5 years of experience in mechanical and electrical engineering, with a focus on construction, building services, or industrial projects.
• Must have Singapore's experience in HDB projects
• Holding a Professional Engineering (PE) certification or other relevant qualifications in M&E engineering (e.g., CEng, LEED accreditation) is a plus.
• Only Singaporeans and Permanent Resident need apply.

The Mechanical and Electrical (M&E) Engineer is responsible for designing, coordinating, and overseeing the mechanical and electrical systems in construction or industrial projects. This role involves working closely with other engineers, architects, contractors, and project managers to ensure that mechanical and electrical systems are designed and implemented in compliance with relevant standards, are cost-effective, and meet the functional and safety requirements of the project.

1. Design and develop mechanical and electrical systems for projects, including HVAC, lighting, power distribution, and plumbing systems.
2. Collaborate with architects and civil engineers to integrate M&E systems seamlessly into the overall project design.
3. Ensure that all designs comply with local regulations, building codes, and industry standards.
4. Prepare technical specifications, drawings, and plans for mechanical and electrical installations.
5. Oversee the installation of mechanical and electrical systems, ensuring they are completed on time, within budget, and according to specifications.
6. Ensure that installation is carried out safely, adhering to safety standards and risk management protocols.
7. Conduct testing and commissioning of M&E systems to ensure they are fully operational and meet performance standards.
8. Manage the M&E components of the project, including scheduling, budgeting, and coordinating with subcontractors and vendors.
9. Monitor and supervise on-site activities to ensure compliance with M&E specifications and quality standards.
10. Collaborate with project managers and other engineers to ensure efficient project execution.
11. Provide ongoing technical support during and after the construction phase, ensuring the mechanical and electrical systems are functioning efficiently.
12. Troubleshoot and resolve issues related to mechanical and electrical systems.
13. Ensure that preventive maintenance schedules are established and followed.
14. Prepare and maintain accurate records of designs, technical specifications, calculations, and installation activities.
15. Report project progress to senior management, identifying any potential delays or issues and recommending solutions.

Requirement

• A Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related discipline.
• At least 3-5 years of experience in mechanical and electrical engineering, with a focus on construction, building services, or industrial projects.
• Must have Singapore's experience in HDB projects
• Holding a Professional Engineering (PE) certification or other relevant qualifications in M&E engineering (e.g., CEng, LEED accreditation) is a plus.
• Only Singaporeans and Permanent Resident need apply.

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Net's Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asia's Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. It's uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

Responsibilities

• Manage the maintenance and daily operations of the DC facilities with the objective of achieving uninterrupted availability at all times and to ensure the fulfillment of our service commitment to customers.
• Support service delivery to ensure contracted service level agreements and key performance indicators are met or exceeded.
• Perform routine facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, HVAC outages. Analyze data and identify trends with facility issues to determine root cause and take appropriate action.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects of data center operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 data center operation to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Support for customer installations, in coordination with the design & construction as well as operations requirements to coordinate customer move-in and turn-on, and other service request & deliveries.
• Maintain compliance with local workplace safety & health (WHS) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP), method of procedures (MOP), and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participate in the scheduling, coordination and completion all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Support various accreditation, certification and compliance initiatives such as BCA-IDA Green Mark DC/QMS/ISMS/BCMS/PCIDSS/OSPAR, etc as may be required.

• ITE/Diploma in Electrical or Mechanical engineering or equivalent qualification
• No experience required as training will be provided
• Must be willing to learn
• Able to resonate with our culture of Respect, Teamwork, Drive
• 24x7 rotating shift duty
• Able to comprehend, analyse and interpret complex project documents, including AutoCAD, Visio and PDF documents
• General technical and functional knowledge of data center infrastructure to include electrical and mechanical systems, fire detection and protection systems, building management systems, equipment maintenance, space planning, construction of critical facilities environment
• Working location: 1-Net (East) at Chai Chee / 1-Net (North) Woodlands

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Job Summary

Our client is seeking a Network Engineer(s) to enhance and maintain the network performance service level to ensure the smooth business operations within the organization.

You will be responsible to handle the incident response & investigation, working with vendors and the respective teams to efficiently resolve issues within the agreed Service Level Agreement (SLA).

Mandatory Skill-set

• Diploma or Degree in Computer Science, Engineering, Electronics or Information Technology;
• At least 5 years of working experience in managing IT system network operations and support (24x7), service recovery, problem management, risk mitigation and impact assessment;
• Proven track record with over 5 years of hands-on experience in successfully implementing IT infrastructure projects for LAN and WAN environments;
• Proficient in installing and configuring a wide range of network technologies, including LAN, WAN, VoIP, WiFi, wireless controllers, access points, firewalls, security gateways, VPNs, 802.1x protocol, VLANs, and L2/3 switches;
• Skilled in using monitoring, network diagnostic, and network analytics tools to ensure optimal network performance and troubleshoot issues efficiently;
• Experience in project and vendor management;
• Excellent communication and interpersonal skills, with the ability to explain technical concepts to non-technical users;
• Strong problem-solving skills and the ability to work independently and collaboratively in a team environment.

Desired Skill-set

• Professional and technical certifications that include CCIE, CCNA, CCDP, CCNP, ITIL, CISSP, AWS Certified Solutions Architect.

Responsibilities

• Lead and manage the network operations, incident handling, maintenance, compliance, and renewal of IT infrastructure systems (Wired/Wireless) to ensure all systems are working in good condition to maintain normal operations;
• Ensure proper project and change management to ensure delivered solutions meet technical, functional, performance and business requirements;
• Responsible to detect signs of abnormality and to report overall system health status to ensure recovery actions, correction actions and preventive measures are in place for every incident reported;
• Be the point of contract to attend to any incident/problem reported and to provide the impact assessments on the outage;
• Work closely with vendors on mitigation measures and assist to resolve the issues and investigation for root cause;
• Maximizing network performance through ongoing monitoring and troubleshooting;
• Ensuring peak network performance through continuous monitoring and effective troubleshooting;
• Scheduling and coordinating network upgrades while investigating network faults;
• Ensuring network equipment is up-to-date with the latest firmware releases;
• Perform system maintenance and deliver regular network status reports to key stakeholders.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Job Description:

You will be responsible for the design of innovative, high-performance, and reliable high-speed analog ICs for SerDes applications. These products aim to enable the next-generation of data communication systems using high speed wireline transmission, empowering the ever growing digital revolution. You will work within a group of design experts interfacing with layout, overseas design teams to create detailed specifications, innovative designs to meet the technological requirements.

Key responsiblities:

• Planning and designing of high speed analog IC for Serdes application based on design requirements
• Perform circuit simulation and optimization to meet specification
• Prepare and discuss circuit, results of design in design reviews
• Conduct IC verification and debugging to ensure silicon perform according to design.
• Work with layout engineer for device level design to realize best circuit response
• Work with application engineers to support customer application issues

Requirements:

• Minimum Bachelor's degree in Electrical/Electronics engineering or equivalent.
• Possess experience working in IC design environment
• Good knowledge in CMOS analog circuit design/processes
• Good knowledge in High-Speed Interfaces design and be willing to take on the challenge of creating cutting-edge new technology by anticipating market trends and product evolution.
• Posess good knowledge in analyzing and designing High-Speed Interface PHY, ADC, PLL, Clock and data recovery (CDR),Equalization and signal integrity optimization, Ampllfiers, reference voltages etc.
• Experience in developing IC and proficient in design tools usage (Cadence/Synopsys, Custom Compiler/Fine Sim)
• Good communication skills and ability to work in a team

Job Title -Plumbing Site Engineer

Job Description & Requirements.

1. Involve in Programming, Scheduling, and Progress tracking of projects·

2. Co-ordinate with Site Supervisor and Sub-contractors on progress matters and prepare monthly and weekly reports·

3. To develop, monitor, and review equipment and manpower deployment plans for project sites·

4. To perform monthly/weekly/daily project progress reporting activities·

5. To monitor the progress of projects and Update the management for any schedule variances·

6. Act as a point of contact and communicate project status to all participants·

7. Any other ad-hoc assignment being assigned from Superior·

8. Knowledge of Plumbing/Sanitary Works an added advantage.

Requirements:·

1. Diploma or Professional Certificate in Engineering (Mechanical) / Construction or equivalent.·

2. Min 1 years experience in similar experience and managing a few sites.·

3. Excellent communication and presentation skills.·

4. Knowledge in project management.·

5. With BCA BCPPF qualifications is an advantage.

6. Knowledge of Plumbing/Sanitary and Gas as an Advantage.