Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery in Qxpress.Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Responsibilities:

• Develop energy efficiency solutions for ACMV and control systems in data centers, commercial and industrial buildings (70% engineering, 30% sales).
• Present energy solution proposal to customer, including turnkey project and maintenance.
• Attend tender site show rounds, assess site conditions, create proposals, and react to RFQs/tenders.
• Effectively respond to client queries and expectations.
• Submitting quotations / proposals to customers in a timely professional manner and continuously follow-up closely.
• Grow the aftermarket service business.
• Contribute to team effort and be accountable for sales growth objectives
• Provide technical training to customers and internal workers.

Qualifications and Skills:

• Degree/Diploma in any Engineering background
• Minimum 2 years relevant sales experience in the ACMV, controls and energy solutions.
• Preferably Singaporean or PR.
• On the job skill coaching/in-house or external training provided
• Possess strong ACMV, controls and energy solution technical skills. Certifications such as SCEM, Energy Auditor and Energy Efficiency Opportunity Assessor would be a plus.
• Proven ability to make impactful business case to win multi-million ACMV, controls and energy solutions contracts.
• Have good existing network with facilities owners and M&E consultants in Singapore.
• Meticulous in execution of work duties, must possess a positive attitude and is hardworking.
• Strong interest in tackling climate change by helping the building owners improve energy efficiency
• Good interpersonal and communication skills

Salary will be commensurate based on qualification and experience

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements
Responsibilities:

Develop software solutions by studying information needs; conferring with users; studying systems flow, data usage and work processes; investigating problem areas; following the software development lifecycle.


Determine operational feasibility by evaluating analysis, problem definition, requirements, solution development and proposed solutions


Document and demonstrate solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code


Prepare and install solutions by determining and designing system specifications, standards and programming
Improve operations by conducting systems analysis; recommending changes in policies and procedures


Update job knowledge by studying state-of-the-art development tools, programming techniques and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations


Protect operations by keeping information confidential
Provide information by collecting, analyzing and summarizing development and service issues


Accomplish engineering and organization mission by completing related results as needed


Support and develop software engineers by providing advice, coaching and educational opportunities


First and foremost, developing software our users need
Mentor junior and mid-level engineers


Collaborate with team to brainstorm and create new products
Grow engineering teams by interviewing, recruiting and hiring
Make informed decisions quickly and taking ownership of services and applications at scale


Work collaboratively with others to achieve goals
Be a persistent, creative problem ­solver
Remain cool and effective in a crisis
Stay on the leading edge of development practices


Passionate about great technologies, especially open source
Understand business needs and know how to create the tools to manage them

In Helmsion Engineering, we believe each and everyone in the company are valuable in contributing to our business. Besides monetary rewards, we also provide on-job training. In this role you will make an important contribution to the entire sales process from business development prospecting to closing of sales.

Sales Engineer

· Coordinate and participate in sales reporting and customer meetings.

· Provide good customer service with technical support and attend to their enquiries.

· Conduct site visits and assessments to meet the clients' needs.

· Seek referrals andcontinue to build customer base.

· Analyse opportunities and make recommendations to customers’ requirements.

· Clearly articulate the value of Helmsion products and services, demonstrate a strong understanding of our product offerings and the competitive landscape.

· Prepare budgetary proposals, Request for Information, Request for Proposals.

· Work with the team to negotiate and close complex deals.

· Strategize with the team to explore the market and maximize profits.

· Prepare analysis reports on sales performance against revenue objectives, sales productivity and ideas to review effectiveness.

Requirements

· Degree in Business/Mechanical Engineering or Technical Education

· Excellent multi-lingual and interpersonal skills

· Excellent time-management with consistent follow-up skills

· Team player who can work independently and possess a ‘go-getter’ attitude

· Excellent relationship management skills with the ability to establish and maintain strong relationships with contacts

· Experience in outdoor industrial equipment sales will be an advantage

· Basic + Allowance - HP & Transport + Commission base on sales target

· Required to visit customers

· Fresh graduates are welcomed to apply if:

(1) you are a team player with strong desire to learn and succeed

(2) Positive, high energy, enthusiasm, drive with an extroverted character

(3) Enjoy working and engaging with people from all walks of life, building professional networks with them

Welding Engineer Summary

Welding Engineer is responsible for developing safe and efficient welding processes and procedures for a variety of materials and products. The Welding Engineer must have an in-depth knowledge of welding principles, materials selection, and welding technologies. They must be able to create and implement innovative welding designs, operations, and processes. The Welding Engineer must be able to troubleshoot and solve welding-related problems. They must also be able to provide technical guidance to other engineers, welders, and technicians.

Job Description:

• Prepare WPS/PQR
• Calculate the hours required for the work process
• Design, fabricate and assemble welding components and products
• Analyze blueprints and other technical documents to plan projects
• Select the appropriate welding techniques and methods for the job
• Conduct tests and inspections on welded components
• Collaborate with other engineers and technicians on project design and development
• Maintain and repair welding equipment
• Monitor and document project progress and provide regular updates
• Ensure that projects meet safety and quality requirements

Skills:

• Planning and managing welding projects
• Developing welding processes and procedures
• Monitoring welding quality and preparing welding reports
• Selecting, assembling, and setting up welding equipment
• Using heat analysis and metallurgical knowledge to determine the correct welding process for each application
• Troubleshooting welding problems and determining corrective actions
• Performing welding tests and inspections
• Conducting welding research

Requirements

• Nitec/ Bachelor's degree in welding engineering or related field
• Experience with welding processes
• Strong Knowledge of engineering welding principles and practices
• Ability to read and interpret blueprints and schematics
• Knowledge of safety procedures
• Ability to work independently and as part of a team
• Excellent problem-solving skills

Job Description:

• Manage the procurement activities of direct materials, including review and convert Purchasing. Requisition (PR) into Purchase Orders (PO); resolve invoice, or quality related discrepancies.
• Sending requirements to suppliers : Request for Quote (RFQ), Request for information (RFI) using digital tools.
• Purchase price analysis and price negotiations; Identification and realization of savings potentials,
• Close cooperation with the stake holders and suppliers.
• Supplier management including supplier set up, supplier evaluation and development.
• Optimization of existing supply chain processes and participation in project teams.
• Leverage existing procurement processes and compliance while seeking to identify best management practices. Using a continual improvement mindset to create efficient processes.

We are looking for:

• Degree in Industrial Engineering, Business Management, Economy or similar areas,
• +4 years professional experience in a similar position,
• Knowledge of Procurement / Supply Chain activities with a broad solid understanding of operational, activities across a range of businesses.
• Previous experience of working in Supply Chain Management
• Good knowledge of MS Office and SAP
• Fluent in English (written and spoken); Strong communication and negotiation skills;

Job Responsibilities:

1. Design of commercial, residential, industrial buildings in precast.
2. To liaise and coordinate with consultants and main-contractor on project details and resolving technical issues.
3. Accountable for the preparation and completion of precast shop drawings with specific time and meets all clients’ requirements.
4. Accountable for accuracy and updating amendments to precast shop drawings.
5. Attend meetings with consultants and main-contractor as well as site meetings.
6. Manage drafting staff and check drawings to ensure compliance with design concept.
7. Manage, plan and schedule projects, shop drawings for submission and production.
8. To liaise internally with coordinator and production on submission/issuance of shop drawings any technical issue and keep them updated of any revision.
9. Conduct review on details of design to ensure the accuracy of shop drawings produced.

Job Requirements:

1. Bachelor degree in Civil & Structural Engineering from recognised University.
2. 3 years working experience in construction design.
3. Familiar with design analysis software such as Etabs, Prokon etc.
4. Good communication skills.

Build a career with confidence

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

About the role

This position is for a Service Sales Representative, who is responsible for pursuing opportunities for quick turn projects to keep our customers operating effectively, supporting various Outside Sales activities and customer relationship management. Responsible for supporting the company's interests and establishing business relationships to enhance outside sales performance.

Key Responsibilities:

As a Sales Engineer, you’ll be responsible for:

• Establishes prospects and develops a professional relationship to understand the customer needs and suggest products and/or services that meet the customer needs.
• Responsible for leveraging existing Service Agreement Customers / Non-Service Agreement Customer base for service repair / Upgrade opportunities.
• Aids in and supports business development activities for prospects within defined customer segment to support the business strategy.
• Provide leads for service agreement sellers / Service Modernization team when dealing with customers not under contract
• Utilize SFDC to manage customer interactions, activities, and opportunity pipeline.
• Prospects bid opportunities, participates in the preparation of bid responses and the negotiation with potential customers.
• Develops personal customer relationships with prospective accounts to influence opportunities.
• Establish and build credibility with knowledge of Carrier products/solutions.
• Develop and sustain customer relationships Clearly articulate the value of Carrier’s value offerings and how they map to the customers’ needs.
• Ability to detect the Customer’s buying stage and adjust selling accordingly.
• Attends trade shows at times to increase the visibility of the organization and potentially influence prospects.
• Achieve order booking in a timely manner meeting consistently sales metrics and annual targets.

Requirements

We are looking for people who has a passion for sales and possesses great communication skills. If this is you, get in touch.

As a minimum you must have:

• Minimum Degree holder.
• Preferably 2-3 years experiences in Sales or Engineering, candidates without prior relevant experience are welcome to apply.
• Proficient in Microsoft Office Skills.
• Able to communicate with stakeholders of all levels.

Benefits

We are committed to offering competitive benefits programs for all of our employees, and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

Designing, maintaining, implementing, or improving electrical cooling products and facilities.

Performing a wide range of engineering tasks by operating computer assisted engineering software.

Conferring with customers, engineers, and others to discuss existing or potential engineering products or project.

Ensuring compliance with specifications, codes or customer requirements by directing or coordinating installation.

Writing reports and compilling data regarding existing and potential electrical engineering projects and studies.

Preparing specifications for purchase of electrical equipments and materials.

Estimating material, labour, or project costs for budget preparation.

Supervising or training project team members.

Maintaining electrical equipment.

Working with a variety of technicians

Roles:

-Interpretation and analyze of production drawings & documents. -Implementing best fabrication / machining practices and techniques to develop and maintain efficient processes to achieve productivity, quality and safety.

-Planning of project and management of the project team to keep project on schedule and budget.

-Handle all day-to-day issues and troubleshooting problems as they arises finding efficient and effective solutions.

-Estimate costs for quotation preparation.

-Coordinate and work closely with management, customers, contractors and suppliers.

-Maintain good customer relationship.

-Perform other duties as assigned to ensure success of project and company objectives.

Requirements:

-NItec / Diploma in Mechanical / Manufacturing Engineering or related.

-At least 5 years experience in metal fabrication and machine shop activities.

-Self-motivated and result-driven mindset

-Great communication and interpersonal skills

• Develop new customers while managing our existing customer base
• Pre-sales preparation (preparing project budgetary prices, quotations, costings, completion of technical specifications, delivering catalogues and engineering data to customers)
• Provide technical and engineering support to customers, whenever necessary.
• Electrical & mechanical products knowledge