Job Description

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards & contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client & regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in Project planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Job Description

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards & contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client & regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in Project planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Responsibilities:

Project Planning & Coordination

• Collaborate with project managers to define project scope, goals, and deliverables.
• Develop detailed project plans, including timelines, budgets, and resource allocation.
• Coordinate with internal teams and external stakeholders to align on project requirements.

Technical Oversight

• Review and interpret technical drawings, specifications and contracts.
• Provide engineering solutions to technical challenges and ensure compliance with industry standards.
• Oversee procurement and ensure materials meet project specifications.

Take-Off and Budget Management

• Prepare accurate Bills of Quantities (BQ) and cost estimates for projects.
• Conduct quantity take-offs from technical drawings and specifications.
• Monitor project costs, manage budgets and implement cost control measures to minimize overruns.

Tendering Assistance

• Support the tendering process by preparing bid documents, reviewing contractor bids, and evaluating technical and financial submissions.
• Assist in drafting and reviewing contracts and agreements.
• Work closely with procurement teams to ensure alignment with project goals and timelines.

Project Execution

• Monitor project progress, ensuring adherence to quality standards, timelines, and budgets.
• Manage changes to the project scope, schedule, and costs through appropriate processes.
• Conduct site visits to oversee construction, installations, or implementations as required.

Communication & Reporting

• Act as the point of contact between clients, contractors, and other stakeholders.
• Prepare and present regular progress reports, technical updates, and cost analyses.
• Address and resolve project-related issues and conflicts.

Risk Management

• Identify potential project risks and develop mitigation plans.
• Ensure safety protocols and compliance with environmental regulations.

Requirements:

• Bachelor’s degree in Engineering (Civil, Mechanical, Electrical, or related field).
• Preferable 3 years experience in project management or engineering roles in oil and gas industry.
• Strong knowledge of engineering principles, budget control, and tendering processes.
• Excellent communication, problem-solving and leadership skills.
• Proficiency in project management software (e.g., MS Project, Primavera), Excel Worksheet, Word Document, Power Point Presentation, AutoCAD, cost estimation tools and BQ preparation software.
• Experience in tender evaluation and contract management.
• Strong organizational and multitasking abilities.
• Wiling to work at project sites and may require extended hours to meet deadlines.
• This role is well-suited for a detail-oriented professional with expertise in project costing, budget management, and tendering who is passionate about engineering project delivery.

The job incumbent will be responsible for supporting the R&D department in various activities, which include the following:

· Support R&D activities for new membrane product or production process improvement.

· Involve in different project-related R&D activities like wastewater treatment, desalination, drinking water treatment, etc.

· Support and perform experiments for membrane characterization and evaluation.

· Carry out qualification tests and analysis for raw materials and products.

· Maintenance and calibration for some of lab equipment.

· Literature search for product development and relevant area.

· Provide reports and updates for R&D activities.

· Other related duties assigned.

Requirements:

· Diploma/Bachelor's Degree/Post Graduate/Professional Degree in Engineering (Chemical), Chemistry or equivalent

· Familiar with handling practice of chemicals

· Independent in performing experiments

· Good team player, self-driven and meticulous

· Good communication and interpersonal skills

• World-leading provider of cargo and load handling equipment (MNC)
• Basic $4,000 - $6,000
• Allowances + OT payable
• Office location: Jurong East-International Business Park

Responsibilities

• Steel Work Supervision: Supervise structural steel repairs, including welding, fabrication, and modifications on RoRo vessels, container vessels, and bulk carriers, ensuring compliance with industry and safety standards.
• Maintenance: Perform preventative maintenance, corrective actions, and upgrades equipment, including RoRo ramps, doors, and hatches.
• Inspections: Conduct thorough inspections of steel structures and mechanical systems to ensure compliance with safety and quality standards.
• Project Management: Lead and manage subcontractors during larger steel repair projects, ensuring the work is completed on time and within budget.
• Customer Support: Establish and maintain excellent relationships with internal and external customers, providing technical support and feedback to the relevant teams.
• Safety Compliance: Adhere to all Quality, Health, Safety, and Environmental (QHSE) standards and site-specific safety protocols.

Requirements

• Min with technical qualification in steel fabrication, marine or other relevant engineering fields.
• Min 2-3 years working experience in supervising steelworks or marine industry.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Assist in the design, development, and implementation of physical security systems, including access control, CCTV, and intrusion detection systems, for industrial facilities
• Ensure designs adhere to security-by-design principles and industry standards
• Conduct site assessments to identify security risks and recommend appropriate solutions
• Collaborate with cross-functional teams, including but not limited to clients and site team to ensure seamless integration of security systems
• Prepare technical documentation and reports as required
• Any other duties to be assigned from time to time

Pre-requisites

• Bachelor’s degree in Electrical Engineering or a related field
• Minimum 3 years of experience in electrical engineering with a focus on physical security systems in industrial plants or similar settings
• Knowledge of security-by-design principles and best practices
• Familiarity with industry standards for security systems (e.g., ISO 27001, UL 294)
• Strong problem-solving skills and attention to detail
• Excellent communication and teamwork abilities

Responsibilities

• Serves as a subject matter expert in E&I equipment failures and ensures the reliability of those equipments.
• Provides technical expertise to plant personnel (Supervisors and technicians) on troubleshooting failures, repairs, and ensuring E&I equipment meets the design intent.
• Diagnose and troubleshoot critical and major plant issues related to E&I, participate in Root Cause Analysis (RCA) to identify solutions, and drive continuous plant improvement initiatives while managing costs effectively.
• Troubleshoot and maintain PLC (Programmable Logic Controller / SIS), with a strong emphasis on experience with Allan Bradley PLCs.
• Provide expertise in maintaining electrical systems, including switchgear, transformers, MV/LV switchboards, Fire alarm and CCTV systems.
• Mentor technicians in executing preventive and corrective maintenance tasks, ensuring adherence to procedures and standards.
• Supports Team Lead in developing the maintenance budget to support the maintenance strategy.
• Ensure adherence to plant Health, Safety, and Environment (HSE) standards. Actively participate in HSE walkdowns and initiatives to maintain high safety standards.

Requirements:

• Bachelor’s degree in electrical engineering or Instrumentation / Maintenance Engineering.
• At least 3 years of experience in Electrical and Instrumentation Maintenance in a chemical or petrochemical or pharmaceutical plant operations.
• Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Effective leadership and mentoring skills with a commitment to developing team members.
• Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues

Interested candidated can email your latest CV to [email protected]

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for DevSecOps Engineer

Internal Code: A24123

What will you do?

• Support cost optimisation got GCC environment
• Project administration and documentation (procurement, audit etc)
• Drive cloud-related initiatives with other teams (coordination)
• Advise and support project teams with cloud-based domain knowledge
• Support incident management (when needed)
• Plan and organise workshops
• Support operations for applications hosted on Amazon Web Services (AWS) or Government on Commercial Cloud (GCC)
• Present and share new ideas or information with department or management committee
• Document requirements, source and evaluate alternatives, and recommend solutions
• Work with the vendors on the solutions and design to seek clarification and acceptance.
• Assess and ensure applications are in full compliance to IM8 and security requirements laid out by Government Agencies.
• Remediate any non-compliance or security findings related to accounts in GCC environment
• Perform scripting or low-code development
• Review and refine existing processes and workflows to improve efficiencies.

What are we looking for?

• Tertiary education in Computer/Computer Science or Information Technology or equivalent
• AWS certifications such Developer (Associate) Certification, AWS SysOps Administrator (Associate), AWS Solution Architect (Associate/Professional), AWS DevOps Engineer (Professional) is preferred
• Knowledge of serverless architectures
• Familiarity with various coding languages, such as Python, Java etc.
• Ability to work both independently and as part of a team with professionals at all levels
• Results oriented
• Hands-on experience in handling operations and incident management
• Strong proficiency in AWS services and architecture
• Experience with infrastructure-as-code tools (e.g., Terraform, CloudFormation)
• Proficiency in scripting languages (e.g., Python, Java)
• Familiarity with security tools and practices (e.g., SAST, DAST, IAST)
• Understanding of cloud security best practices
• Experience with monitoring and logging tools (e.g., CloudWatch)
• Experience in supporting operation for applications hosted on Amazon Web Services (AWS) or Government on Commercial Cloud (GCC)
• Familiarity with governance and adoption for enterprise IT environments
• Strong analytical, conceptualisation and problem-solving skills
• Team player with strong organization and people handling skills
• Excellent communication skills, both oral and written, with the ability to pitch ideas and influence stakeholders
• Working experience in government environment and/or cybersecurity related fields will be an added advantage
• Advantageous to have experience in the following areas: Government IM8 policies.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

We are seeking highly skilled and motivated talents to join our Mapping and Localization Team for Autonomous Driving. This role involves working on cutting-edge technologies to enable high-precision localization and mapping systems that are essential for the safe and efficient operation of autonomous vehicles. The ideal candidate will have deep expertise in algorithms, sensor fusion, computer vision, and robotics, with a passion for advancing autonomous driving capabilities.

Job Responsibilities

• Design, implement and optimize algorithms (e.g. SLAM) for real-time, high-precision localization of autonomous vehicles using sensor fusion of GNSS/IMU/DR, LiDAR, cameras, HD Map, and other sensors.
• Develop and maintain high-definition (HD) maps for autonomous driving applications. Work on the creation, updating, and management of detailed maps that include lane information, road geometry, traffic lights/signs, and other relevant features.
• Improve perception models for feature detection and tracking. Use deep learning and computer vision techniques to detect key features such as road boundaries, obstacles, and dynamic objects to enhance mapping and localization accuracy.
• Develop test plans, perform validation, and run simulations and testing to ensure the accuracy, reliability, and safety of mapping and localization systems in both controlled and real-world environments.
• Stay up to date with the latest advancements in localization, mapping, and autonomous driving technologies. Lead efforts to continuously improve the performance and capabilities of our mapping and localization systems.
• Write professional design and technical documentation.

Job Qualifications

• Master’s or Ph.D. degree in Robotics, Computer Science, Electrical and Electronic Engineering, Computer Vision, Deep Learning and AI, or a related field.
• Working experience in localization, mapping, or autonomous driving systems is preferred.
• Expertise in key mapping and localization techniques including GNSS/IMU/INS, SLAM, and especially deep learning-based perception and sensor fusion.
• Strong analytical and problem-solving skills, strong programming skills in Linux C/C++, excellent communication skills, ability to work collaboratively with the team, etc.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

The position holder reports to Sales Manager/Senior Manager and must carry out the assigned duties and responsibilities and be able to work closely with other departments and other functional managers within the organization.

He/She MUST at all times maintain the confidentiality of all prices and plans and SHALL NOT disclose confidential information without the approval of her/his Manager.

Key Tasks:

1) Sales Functions

• Achieve and excel against quarterly sales targets.
• Prepare sales quotations and proposals based on technical specifications.
• Follow up sales enquiries.
• Build and maintain good customer relations with existing accounts.
• Actively pursue new sales opportunities.
• Grow sales in the assigned segment.
• Monitor marketplace information and provide recommendations.
• Regular customer visits to position En-Syst as the preferred product/solution provider.
• Provide appropriate technical support to customers, consultants, and prospects.

2) Administration and Operational Functions

• Keep good records of documentation, including enquiry register log.
• Provide monthly sales updates and reports.
• Co-ordinate and lead meetings.
• Prepare a sales work order and handle over to the project team.
• Lead and execute improvement/new processes and customer service experience.
• Ensure process conformance and local legislative compliance with appropriate standards and authorities.

3) Other Assignments

• Shall carry out any project/task/work assigned by Immediate Manager, General Manager, and Directors as and when required to support the business.

Requirements

Education

• Candidate must possess at least ITE/Diploma/Advanced/Higher/Graduate Diploma in engineering, business, or marketing.

Knowledge / Experience / Others

• Two to three years of industry sales experience and meeting sales goals.
• Customer service and relations skills.
• Adept at Microsoft Office and quickly pick up ERP software navigation skills.

Personal Competencies

• Shall have valid Singapore class 3 driving licence.
• Able to perform multi-tasking.
• Independent, team player with good interpersonal skills.
• Competitive and extroverted as the role is customer facing and requires winning people over.
• Self-initiated to gather information about the market.
• Proponent of embracing technology to improve the sales operations process than deferring back to ‘entry level’ solutions.

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Support all activities in maintaining a QC IPCDS lab in BioPharmOps QC. Testing of in-process control & drug substance samples, to support production needs and document in accordance with written testing SOP’s and in accordance with local/ international regulations.

Key Responsibilities

• Maintain QC IPCDS laboratory in full cGMP-compliance.

• Track and execute individual training requirements to ensure completion on time including new methods and instrumentation.

• Ensure laboratory operations are in accordance to cGMP standards

• Perform raw material testing in accordance current testing monographs/SOPs and in accordance with local/ international regulations.

• Ensures that testing completed in a timely manner based on plan.

• Support laboratory routine operations such as inventory management and house-keepings.

• Support the optimization of work flows in the QC IPCDS Laboratory.

Requirements

• Minimum Diploma with 4 to 5 years relevant working experience in GMP-regulated industries in Quality Control. Fresh graduates are welcome to apply.

• New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

• Background knowledge on analysis such as HPLC, UV Spectrophotometer, pH/Conductivity meter, Total Organic Carbon (TOC),

• Preferrably a working knowledge of FDA and ex-USA regulatory requirements as well as industry quality management tools, standard, and quality systems.

JOB DESCRIPTION

· Embedded system software development

· IoT related protocol and software development

· Peripheral device driver and Wi-Fi related software development

· Customer issues support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electronics or Networking engineering

· Familiar with C/C++

· Familiar with embedded system and experience in driver-related development is an advantage

· Peripheral and Wi-Fi-related experience is an advantage

· Good communication and team working skills

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Responsible for inspection of parts and products and ensuring that they comply with the set standards and specifications
• Ensure that all inspection check sheets are duly completed
• Ensure that non-conformance parts and products are not released to the customers
• Ensure that defects are corrected before releasing them to Production
• Ensure that corrective or preventive action are in place and sustained
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job Requirements:

• Minimum NTC2/3, ITC in Mechanical/Mechatronics/Precision Engineering
• At least 1 year of experience in quality control and related work
• At least 1 year of experience in the operation of CNC machines
• Basic knowledge of Microsoft Office tools: Excel, Word, PowerPoint

Responsibilities:

• To cover design aspects for systems such as Radars, Navigation Comms, Integrated Comms, Integrated Combat Systems and Layout designs
• Work with other trades on integration design between Platform and Systems
• To prepare the General Arrangement Plan (GAP)
• Preparation of tender proposal and technical specifications for tender submission
• Establish Major Equipment Specifications and Selections
• To check and ensure equipment specification, technical information, functional description document, installation control document and interface design specification are correct and properly maintained, disseminate and use for the preparation of design work activities
• Planning and control of Basic design document schedule to support project milestone
• To develop of new designs and design concepts;
• To source for new design tools;
• To provide specialist technical assessment and analysis other in-house departments and external parties
• To continue updating the developing and expanding of the design database
• To participate in tests and sea trials, including HAT and SAT, where required
• Perform detail design calculation where necessary
• To follow up and resolve all the design issues raised by Owner, Classification and Statutory Authorities on all design documents promptly and timely to support the schedule, including on site checking and discussions
• To generate 2D arrangement drawings for major equipment
• To generate list of design drawing / document specific to each project
• To check working drawings and ensure that they conform to contractual technical specification, installation control documents, Classification and Statutory Rules/Regulations
• To keep abreast with current technological developments and products, Classification rules, military and industrial standards and other standards relevant to design activities.

Requirements:

• Degree in Electrical & Electronics Engineering
• 3 to 5 years of relevant experience in Marine related projects on Navigation Communications Systems and Radars (Fire Contol & Surveillance) will be advantageous
• Possess both project management and man management experience
• Ability to manage external and internal stakeholders will be critical for this role
• Proficiency in AutoCAD
• Only Singaporeans will be considered for this role

Additional Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

1.1. Broad Functions:

As part of the technical services team, the Chemist is responsible for managing and control of the lab polymerization facilities. They need to design, optimizing for creating polymer materials and support the production processes such as scale up, trouble shooting and improvement.

1.2. Job Description / Responsibilities:

1.2.1. Development

1.2.1.1. Design and synthesize new polymers with desired properties for various applications.
1.2.1.2. Conduct experiments to understand the relationship between polymer structure and its physical and chemical characteristics.
1.2.1.3. Analyse and interpret data from various techniques like spectroscopy, chromatography, and thermal analysis to characterize polymers.

1.2.2. Polymer Production and Processing

1.2.2.1. Develop and optimize production processes with productivity and cost effectiveness.
1.2.2.2. Troubleshooting issues arising during mass production and suggest solutions.
1.2.2.3. Collaborate with related department to ensure smooth integration of new polymers into existing production lines.

1.2.3. Material Characterization and Testing

1.2.3.1. Perform various tests to evaluate the mechanical, thermal, electrical, and other properties of polymers.
1.2.3.2. From the test results to make a judgement the suitability of polymers for specific application.
1.2.3.3. Proceed with modification to polymer formulation based on performance needs.

1.2.4. Communication and collaboration

1.2.4.1. Document research findings and experimental procedures in clear and concise report.
1.2.4.2. Present research results to colleagues, management, or external audiences.
1.2.4.3. Collaborate effectively with related parties to achieve project goals and to resolve issues.
1.2.4.4. Support training new products/process modification for related parties.
1.2.4.5. Train basic knowledge in lab for new staff

1.2.5. Laboratory Management

1.2.5.1. Safe operation and up-keep 5S of laboratory.
1.2.5.2. Training of new lab staff.
1.2.5.3. Lab work planning and scheduling.
1.2.5.4. Equipment & spare parts management.
1.2.5.5. Maintain chemical inventory.

1.2.6. Others

1.2.6.1. Perform any other tasks assigned by the manager

1.3. Requirements:

1.3.1. Degree in chemical engineering, Polymer synthesis chemistry, or equivalent.
1.3.2. Fresh graduate - Junior Chemist
1.3.3. At least 3 years of relevant working experience – Chemist
1.3.4. Understand the hazardous of materials from SDS + Singapore regulation and judge an appropriate instruct.
1.3.5. Basic knowledge and practical experience for chemical experiments.
1.3.6. In depth knowledge of polymerization mechanism and kinetics.
1.3.7. Expertise in polymer characterization evaluation techniques.
1.3.8. Operate spectroscopy, chromatography and thermal analysis.
1.3.9. Ability to interpret and analyse data.
1.3.10. Excellent written and verbal communication skills.
1.3.11. Ability to collaborate effectively with colleagues.
1.3.12. Understanding of relevant safety regulations and best practices.
1.3.13. Project management skills.
1.3.14. Intermediate MS Office skills
1.3.15. Self-disciplined as a role model for employees.
1.3.16. Meticulous in handling complex work.
1.3.17. A resourceful problem solver.
1.3.18. A person with high degree of integrity and patient.
1.3.19. Understand the Japanese culture to support working with Japanese colleagues. (Preferred)

1.4. Others:

1.4.1. Location: Jurong Island (Company Transport provided)
1.4.2. Commence work: ASAP.
1.4.3. Applicants can work in Singapore without requiring a work pass.
1.4.4. Working Hours: Mon ~ Fri from 8:00 am - 4:45 pm

• Meet Ship Superintend at ongoing vessel at Anchorage or PSA, inspect
• refrigeration, accommodation air-conditioner systems, package type air-
• conditioner, split type air-conditioners.
• Repair the equipment as per customer’s requirement or services or retrofit,upgrade the entire system.
• Supply brand new refrigeration and air-conditioning compressor or re-
• conditioned compressors as per buyer requirement.
• Supply, install package type air-conditioners, split type air-conditioners.
• Supply refrigeration & accommodation air-conditioner compressor parts,
• lubrication oil and refrigerant.

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Monitoring the entire production line with quality issues.
• Work with internal teams to improve the quality of the products
• Familiar with various inspection techniques and able to act as an auditor for quality system

Requirements:

• Require to travel to our malaysia's plant
• Minimum 1 year working experience in manufacturing field
• Previous work experience as a QA Engineer or any similar role
• Minimum Diploma/ Post-secondary/ Polytechnic in engineering or equivalent

• Manage and maintain security protocols, IT systems, networking infrastructures and database systems.
• Troubleshoot technology issues.
• Manage multiple projects simultaneously.
• Work with inter-disciplinary teams to craft IT solutions.
• Communicate complex information to a non-technological audience.
• Assist in researching, designing and implementing new programs.
• Identify and solve problems in existing hardware and software solutions.
• Develop, modify and maintain database.

Job Responsibilities

• Create firmware specifications based on design rules, internal processes, and product/system requirements.
• Design and develop embedded firmware in accordance with established design rules, processes, and specific customer/product requirements.
• Development and implementation of signal processing algorithms in embedded firmware, with cross functionality team.
• Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.
• Support production implementation in the embedded software perspective
• Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.
• Liaising with Headquarter on the technical support and technology transfer.
  Verify regulatory compliance with support from head office.

Job Requirements

• Master / Bachelor in Electronic / Computer Engineering or equivalent
• Minimum 3 years relevant experience in embedded software design and development
• Strong knowledge and direct experience with C & C++ programming languages
• Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.
• Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.
• Knowledge on Python & Matlab

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981