• Total Plant Maintenance (Preventive maintenance & Corrective maintenance)
• Daily operations suport (Including Ah-hoc & CAPEX Projects)
• Shutdown, Pit-stop/Turnaroundworks
• Plant start-up commissioning support
• Computerized maintenance management system
• Condition Monitoring/Reliability Engineering
• Identifying project goals and scope
• Planning and documenting project tasks
• Ensuring deliverables are delivered on-time
• Managing all project resources
• Effectively communicating with stakeholders
• Eliminating blockers and potential risks
• Documenting projects process using various project management tools
• Ensuring top-quality results and project success

Key Accountabilities: ​

Sales Engineering and Application Matters

• Provides the design, drawing and documents for the customer’s technical requirements.
• Calculates, verifies, selects the right equipment/suppliers.
• Provides the technical specifications and defines the scope of supply for the equipment.
• Provides and maintains the product and sales engineering information.
• Uses the computerized engineering tools/database, technical library information and factory standards for the engineering work.
• Prepares and carries out technical presentations and training.
• Familiarize oneself with the applicable international and in country technical standards.

Sales Support Matters

• Work closely with sales to define the technical scope of supply.
• Reviews/clarify customer’s specifications & tender documents.
• Provides technical solutions and scope of supply.
• Coordinates with factory and local suppliers for scope of supply.
• Provides total product and project cost calculation.
• Provides technical specs, scope of supply and work with suppliers/contractors to obtain proposals and quote for the equipment timely.

Order Execution

• Raises the necessary purchase requisitions for the scope of supply.
• Manages the order with internal departments, suppliers and contractors till all contractual requirements are fulfilled.
• Verify on the clarification of the order, sales engineering, and drawings/documents.
• Knowledge in SAP tool

Qualifications and Skills:

• University / college studies in Electrical or Mechanical engineering.
• Experience in the diesel/gas engine/generator industry, min. 7 years.
• Hands on experience on engineering, site supervision and commissioning of diesel genset with knowledge of electrical power systems and genset control system
• Knowledge of engineering calculation for and related to genset and electrical systems.
• Review electrical schematics, wiring diagrams, P&ID and system layouts.
• Knowledge and Project execution in the packaging and testing of genset.
• Knowledge in Autocad would be an added advantage.
• Knowledge of switchgear and electrical power protection would be an added advantage.
• Adaptable to different cultures and business practice
• Excellent team player with an open mindset, collaborative spirit and excellent communication skills.
• Proactive and positive attitude.
• Proficient in English language. Fluent in Mandarin would be an added advantage.
• Willingness to travel.

Job Description

• Liaise with clients to identify and define project requirements
• Coordinate between authorities, management and relevant stakeholders on project implementation
• Liaise/ negotiate with suppliers and sub-contractors
• Carry out sit surveys and submitting proposal for cabling works, project planning, etc.
• Develop or update project plans including information such as objectives, technologies, schedules, costing, and staffing
• Monitor and manage project milestones and deliverables
• Inspection of inventory to ensure working conditions of machines and equipment
• Monitor store inventory, carry out stock take and ensure quality control of project materials
• Ensure project claims are carried out in a timely manner and projects are closed successfully
• Report project status, such as budget, resources, technical issues, customer satisfaction, etc.
• Utilize industry best practice, techniques, and standards throughout the project execution

Requirements

• At least 3 years of experience in telecommunication/ fiber related fields (OSP & ISP)
• Possess at least a diploma in any engineering field
• Possesses a Class 3 driving license
• Able to commit to a 5.5-day work week

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Hunter role need to exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. Diploma Holder in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal hunger for success and communication skills

· Initiative and results driven

· Entry level candidate are welcome

Responsibilities

• Develop technical designs of roadworks and highways, traffic diversion schemes and delivery models according to different standards and requirements.
• Planning and supervising projects.
• Responsible for temporary traffic diversion scheme to suit construction progress.
• Coordination with relevant authorities for purpose of obtaining information and approvals.
• Preparation of Traffic Management Plan (TMP) for construction project.
• Preparation of tender documents and proposals.
• Preparation of Traffic Management Plan for road widening and viaduct construction project.
• Stakeholder management & liaising with different authorities.

Requirements

• Preferably with a Degree in Traffic Engineering and above or equivalent.
• Min 10 years experience in construction industry .
• Able to work as a team, assertive, independent, and proactive.

Roles & Responsibilities:

To assist in ensuring the smooth operation of site activities

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

To assist in coordinating with sub-contractors and attend to clients' queries to ensure timely work arrangements

To be involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standard

To assist in managing project documentation and maintain accurate records

Ensure compliance with all health and safety regulations

Requirements:

Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification

Experience or knowledge in Bridge Construction/Crosshead/Lifting Frame/Launching Gantry Operation/Pre-cast Segment Method/MRT/LTA will be an advantage

More than 3 years of site experience in the Construction sector, preferably in superstructure crosshead/precast segmental bridge and Launching Gantry operation or similar

Good team player and able to work independently

BCSS certificate

JOB DESCRIPTION

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and prepare report for project progress update
• Prepare project budget and cost estimation
• Coordinate and plan to achieve project milestones, project deliverables and schedule monitoring
• Manage, control and monitor all project activities such as engineering design, site execution, testing and commissioning of project
• Prepare / review as built iso for claim purpose, follow up with client for any outstanding DO issue
• To prepare progress claim report and submit progress claim documents according to client requirement
• To prepare operations and maintenance manual after project completion
• To coordinate with inter-departments for operations matters (procurement, engineering, group office)

Competency Requirements

• Diploma or Degree in Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

Please include your current and expected Salary in your resume.

· Provide technical supports before & after sales

· Sourcing, compiling of costing, preparation of proposals

· Reviewing of sales inquiries, tender specifications, drawings etc.

· Corresponding with supplier and customers

· Prepare/submit quotations/proposals after reviewed & approved

· Handle ordering processing

· Reviewing of purchase orders against drawings, specifications, BOM and/or RFQs

· Diploma in Mechanical/Electrical/Mechatronics with experience preferred

· Higher Nitec/Nitec in Engineering with experience are welcome

· Outspoken personality, able to work independently as well as a team player in pressurized environment

· Transport provided in Boon Lay

· Training will be provided

· Work in customer’s site if requires

· Entry level candidates are welcome

· Both genders may apply

· Estimate Monthly Salary : SGD2,500.00 to SGD3,200.00

Job Responsibilities

• Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects
• To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.
• Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule
• Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit.
• Be the primary focal point between various parties

Qualifications & Experience

• Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

• Self-starter and ability to self-manage strong interpersonal and leadership skills
• Demonstrated oral and written communication skills
• Must have high level of integrity, able to generate trust and build alliances with co-workers
• Able to communicate effectively & diversely for prompt resolution to site matters
• Able to work independently, take initiative and willing to work overtime/weekends (when needed)
• Ability to foresee and resolve issues before surfacing would be an added advantage
• Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures
• Ability to maintain good project documentation and is familiar with ISO documentation requirements
• Safety certifications such as Working at Height, Construction Safety Orientation Course etc. preferred
• Mandarin speaking preferred as will be liaising with overseas vendors
• Basic knowledge on Industrial Control Real Time Systems such as PLC/SCADA/IoT
• Basic programming skills in VB, C, C++, Java, C# etc is advantageous
• Additional skills in AutoCAD, Revit and Microsoft Office are advantageous

Main Job Function: Responsibilities:

• Overall responsible for Aftersales services and customer coordination
• Installation, commissioning, repair and preventive maintenance of Compressed Air systems
• Conduct on-site training to customers.
• Service Report Management,
• Spare Parts Ordering & Processing for jobs and stock
• Organizing goods for projects and coordinating Deliveries when required
• Prepare quotations for service jobs and follow up.
• Warranty handling

Pre-requisites:

· Advance Diploma in Mechatronic/Mechanical/Electrical Engineering

· Able to work independently with good analytical, communication and interpersonal skills.

· Willing to travel in Asia region for After-Market Support and training when required

· Team player who is self-motivated

· Knowledge on Screw & Piston compressors preferred Both Oil Lubricated and Oilfree

· Class 3 driving license would be added advantage.

· Able to speak and write good English

· Able to speak in Chinese (Mandarin) will be of advantage

· Knowledge of using computer for communication and use in controller repairs

· Technical knowledge with related to Air compressors/machinery & parts

· Over 2 years work experience in similar work environment would be an added advantage

Interested applicant, please email in with a detailed resume with photograph and stating expected salary to:

Nalin Amunugama

General Manager BOGE Asia Pacific

Email: [email protected]

Key Responsibilities:

- Provide technical support and expertise on marine electrical systems, products, and solutions.

- Assist in the selection, specification, and procurement of marine electrical equipment for various maritime applications.

- Evaluate client requirements and recommend suitable electrical solutions, ensuring compliance with industry standards and regulations.

- Work closely with the sales team to deliver product presentations, provide quotes, and respond to customer inquiries.

- Liaise with vendors and suppliers to ensure the timely procurement of electrical components and equipment.

- Prepare and review electrical drawings, schematics, and documentation for projects.

- Ensure adherence to safety standards and quality assurance procedures for all electrical installations and services.

Job Requirements:

- Minimum 3 years of relevant experience in marine electrical systems.

- Strong understanding of marine electrical standards, regulations, and safety procedures (e.g., SOLAS, ABS, IEC standards).

- Familiarity with electrical design and installation on marine vessels.

- Excellent communication skills, both verbal and written, with the ability to interact with clients, suppliers, and internal teams.

- Ability to work independently and as part of a team in a fast-paced, customer-oriented environment.

- Strong problem-solving skills and attention to detail.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience
• Site Location West Region

Drex-Chem Technologies Pte Ltd

The DREX-CHEM GROUP is a successful leader in the distribution of specialty chemicals, resins, pigments, printing consumables & equipment in ASEAN and Hong Kong/China. The Company views our human resource as the most vital key to our continuing growth and profitability.

To meet the challenges of our growth market, we have IMMEDIATE vacancies for:

SALES ENGINEERS

(Ability to work in Tuas and Stay in Singapore should Only Apply.)

Responsibilities :

· Sales, marketing, technical service and support.

· Product development, sales and supply.

· Responsible for processing orders and documentation.

· Identify and create new accounts to increase sales revenue.

· Execute a sales plan and report daily activities to the Manager

· Develop business relationship, visit and make presentation to potential customer.

· Collect and review customers’ enquiries and prepare quotations.

Requirements:

· Degree or Diploma/ITE in Chemistry or an discipline in Chemical, Electrical, Electronics or Mechanical or related discipline.

. 2 years’ experience in Sales/Marketing in either Semiconductor and Electronic Industries

· 1-2 years’ experience in Sales & Marketing in the Paints/Inks or Printing or Construction Industry will be an advantage.

· 1 to 2 years or more hands-on experience in sales or technical support, manufacturing, laboratory or quality control.

· Excellent communication skills.

· Good spoken and written English.

· Valid Class 3 driving licence with own car has added advantages.

· Reliable, loyal, committed, honest and capable of developing new markets.

· Successful finishers with good track record have an advantage.

· Willing to learn and adapt.

· The necessary training will be provided.

· Able to travel overseas for training and business development.

. Ability to work in Tuas and stay in Singapore should only apply.

The Company offers excellent career advancement program with attractive remuneration packages for performers.

Interested applicants are invited to write in (marked “Private & Confidential”) before 8 February 2025 with full resume, current and expected remuneration details to:

Drex-Chem Technologies Pte Ltd

1 Tuas, Avenue 16.

Singapore 638924

Attn : HR Manager

Or email to: [email protected]

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

JOB RESPONSIBILITIES:

• Perform Stamping die set design according to product specification & requirement
• Carry process layout discussion & confirmation with R&D & production team
• Perform 3D CAD construction for complex shapes Profile Punch & Die
• Work as a team & perform tool testing with tester to achieve tooling FA timely
• Carry out further tool improvement during initial production period to stabilize tool condition

JOB REQUIREMENTS:

• Diploma / ITE in Mechanical Engineering, Precision Engineering or related disciplines
• Experience in metal Stamping Designing is needed
• Proficient in 2D & 3D AutoCAD or others CAD applications
• Be able to work independently & work under pressure
• Willing to perform overtime

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

JOB DESCRIPTION

• Assist Project Manager to oversee, coordinate & execute assigned projects. And ensure projects complete and deliver it on scope, on schedule & on quality.
• Perform project schedule, planning, material requisition, cost monitoring and documentation submission & control.
• Coordinate with the internal design team & external customers on project document & drawings submission, amendments, re-submission & approval.
• Update & backup project documentation, drawings, reports & procedures (SOP, WI, Lesson Learned, etc.)
• Participate projects progress meeting and update weekly status, monitor contracts completion and submit weekly reports to PM & customers.
• Work closely with internal team (production, logistic, QC, service etc.) on project schedule and deliveries, FAT, SAT, and modification work.
• Co-ordinate with principals and customers to support technical matters of products manufacturing in factory, and systems installation on site.
• Attend site meetings, site surveys and switch room measurement etc. site activities.
• Liaise with customers on factory inspection, deliveries, installation and on-site testing.
• Work together with PM & team members to attend & service customers’ complaints, feedbacks and provide solution for project change requirement.
• Support team members work to enhance teamwork spirit.
• Participate in product demonstrations, testing and commissioning if required.
• Any other duties when assigned by management.
• Ensure all safety measures and proper housekeeping rules are implement.
• Adhere to plant safety, food safety, sanitation standards and following all governance guidelines.

EDUCATIONAL QUALIFICATIONS

Diploma in Electrical Engineering, or related industrial engineering field.

EXPERIENCE & SKILL FACTORS

• Min 2 years’ working experience, prefer in project management.
• Some hands-on experience of electrical SWBD and system assembly & installation.
• Familiar with local codes, regulations and procedures.
• IT skills (MS Office). AutoCAD preferred.
• Good communication and people relation skills.
• Leadership, ownership, team player, self-motivated.
• Attention to details and eager to learn new technology

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

We are seeking a dedicated Support Engineer professional to join our team to ensure the smooth operation of our systems and applications. The ideal candidate will have strong technical skills and be able to collaborate with various departments to support and maintain our software systems.

Responsibilities:

Monitor and troubleshoot production issues (Linux VMs, Vendor Product, SFTP).

Collaborate with cross-functional teams to identify and resolve production issues.

Perform root cause analysis and provide solutions to prevent future issues.

Create and maintain documentation related to production issues and resolutions via JIRA.

Implement and maintain processes and procedures to improve production support.

Provide daily, weekly, and monthly reports on system performance and issue status.

Ensure proper deployment and release of software updates & infrastructure patches/upgrades.

Participate in on-call rotation and respond to production issues after business hours. There are two shifts, Morning (7 AM to 4 PM) and Afternoon (2 PM to 11 PM), running 7 days a week.

Deployments during silent hours.

Development work within the vendor product (about 10%-20% of time).

Preferred Qualifications:

Bachelor’s degree in Computer Science or related field.

2–4 years of experience in Production Support or related role.

Strong technical skills in Java, SQL, UNIX, and scripting languages.

Ability to troubleshoot and resolve complex production issues efficiently.

Excellent problem-solving and analytical skills.

Effective communication skills to collaborate with cross-functional teams effectively.

Willingness to participate in on-call rotation.

Job Scope:

• Submit plan and execute well-defined sales strategies to achieve targets;
• Develop and maintain good rapport with existing customers;
• Promptly and professionally attend to customers’ enquiries and requests and provide technical advise on both existing and new products or systems;
• Supports sales opportunities through presentations, calling and visiting customers and prospects, needs identification with active follow-ups;
• Ensuring smooth service operation efficiency for customers with sales and operations team
• Investigating and resolving customers’ issues with relevant departments when necessary
• Acquire new customer accounts;
• Assist in preparation of proposals and quotation administration;
• Contribute creative alternative ideas to help maximize sales opportunities;
• Participate in marketing, advertising, promotional and publicity activities in line with corporate and product strategies;
• Gather information on market demand, competition and latest product developments
• Conduct periodic sales forecasts;
• Prepare weekly sales/contact reports.

Requirements:

• Diploma/Degree in Mechanical/Marine Engineering;
• Experience in Sales preferred but fresh graduates are welcome to apply;
• Possess Class 3 driving license (with own transport preferred)
• Excellent communication, interpersonal and presentation skills;
• Possess an outgoing personality;
• Resourceful, proactive self-starter, positive attitude, performance oriented, able to work independently but also a team player;
• Must be able to read and write fluently in English

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

Job Descriptions:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Job Requirements:

• Bachelor Degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Remuneration:

• Working hours - Monday to Friday: 8am to 5pm ,Alternate Saturday: 8am to 5pm
• Company Transport / Transport Allowance $120 if possess own transport
• AWS
• Performance Bonus
• Medical Benefits
• Sign-on Bonus

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

Min Qualifications / Experience :

Bachelor Degree in Mechanical Engineering with minimum 3 years relevant experience

Job Skills Required :

Mechanical design of pressure vessels, heat exchagers & atmospheric storage tanks. Thermal design of heat exchangers is also a required skill.

Familiar with international design codes such as ASME, British, Australian & European Codes, Tema, API650 & etc.

Proficient in design software such as PVELite, NozzlePro, StaadPro & Autocad.

Duties & Responsibilities

The duties and responsibilities are:

a) Responsible for the formulation of schedules and datelines for design and date of submission.

b) Check detailed design and drawings based on relevant codes and client specifications, while ensuring the most cost efficient methods of design are used.

c) Liaise and co-ordinate with Project Department to obtain relevant information for detailed design.

d) Determine the conditions and study all pertaining data thoroughly and accurately for a design. Many different combinations of loadings are possible and the most probable combination of simultaneous load for an economical and safe design is selected.

e) Control and issue all technical documents.

f) Any adhoc project assigned by Design Manager.