About our client: Our client is an international engineering and project management consultancy that specializes in infrastructure and environmental projects.

*Please note that this role will be hired on a contract basis to support our client's project.

*Work Location: Tuas

About the role: The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 5 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas or power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the electrical team for project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability and experience on 66kV, 10.5kV, 6.6kV and LV related power distribution equipment and cabling installation and commissioning requirement. Experience of large power transformers, generator circuit breakers, MV switchgear, protections and control equipment, MCC and UPS and DC system is expected.
• Having good understanding and interpretation of SLD, protection and metering SLD, schematics and cabling drawings.
• In depth of understanding for electrical power automation for electrification of WtE project.
• Contracts management in managing site works while maintaining swift communication with client and contractors for the WtE project
• Familiar with SS638 requirements on electrical installations in Singapore.
• Having multi-discipline coordination attitude in execution of electrical works
• Basic knowledge of instrumentation and control equipment for site works
• Review the submittals from Contractors for electrical installation and commissioning procedures of various sub-packages.
• Engage in site meetings with technical discussion contractor and client
• Joining site inspection for contractors works.
• Participation of FAT and SAT of electrical equipment
• Ability to use Navisworks to review 3D BIM Model for routing of site utilities.
• Review of DCS / PLC system configuration, topology and controller, RIO engineering deliverables for the implementation of WTE automation systems
• Review the submittals from Contractors for Process Control like STG package, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, EMIS, PFMS, Communication Network Infrastructure etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment DCS, EMIS, PMS, PLC, Weighbridge systems etc
• Provide Technical support in Testing and Commissioning of WTE plant.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: R1325507

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg. No: R1325507

• Prepare and analyze cost comparison for Building and Construction Signages
• Obtaining quotations, liaising and negotiate with main and sub-contractors
• Responsible for measuring quantities
• Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments
• All other QS related job scope

Job Requirements:

• Degree / Diploma in Building or its equivalent
• At least 2 years experience as QS in construction industry specialise in Building and Construction Signages
• Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines
• Working location at East Area

Quality Executive

1 year contract, potential to renew

Come and join us!

Do you wish to work in a world-class organization trying your hands at something you have dreamt of doing?

“FIND YOUR PLACE” by joining a world-class MNC Healthcare company

Get an opportunity to explore new technology, learn new skills, enjoy the diverse and open culture, engagement and care, flexible working model, career opportunities, competitive salary and bonus, and endless amenities and benefits.

Company Description:

Our client is an MNC Healthcare company. As a focused healthcare company, with expertise in Innovative Medicine and MedTech, they are empowered to tackle the world’s toughest health challenges, innovate through science and technology, and transform patient care.

Overall Purpose of the Job

• The Quality Executive will assist in the management of the day-to-day aspects relating to Quality Management Systems and Compliance
• The Quality Executive owns and implements quality assurance programs designed to ensure effective and consistent processes with established standards.
• The Quality Executive works closely with SLH Operations and 3PL to drive timely resolution on Quality related issues.

Job Description

• Manage quality in product receiving process (including receiving inspection) with 3PL
• Support the inventory management in quarantine cage with 3PL
• Quality oversight on 3PL product destruction process.
• Lead resolution in non-conformances and discrepancies in a timely manner.
• Coordinate between 3PL, Source co. or Franchise on the monitoring of ambient environment (temperature and humidity as required) and handling of issues according to predefined agreements.
• Supports repack, relabeling, over labeling, kitting and reworking operations conducted
• Back-up Coordinator for stop shipment/ recall processes within the DC.
• Support quality management of repacking, relabeling, over labeling, kitted, and reworked
• Support the QA release of product repackaged, relabeled, over labeled, kitted, and reworked
• Supports product complaints, service complaints process and systems.
• Acts as an administrator for automated IT platforms and audits and change control.
• Manages / supports records and document management.
• Supports training management.
• Supports Quality audits and related action planning/implementation.
• Support Escalation of quality issues to the management.
• Responsible for the capture and processing of complaints reported to DC (Products and Distribution related complaints)
• Support the Quality audits (Internal, External and Supplier) of DCs
• Support the GxP (GMP, GDP) compliance of the DC.
• Responsible for day-to-day activities of base business.

Authorities

• Preparation / Review and Approval of validation documents
• Review and approval of repack relabel batch release.
• Product hold and release disposition in SAP for non-conforming material
• Product defect review and approval
• Initiation and review of procedures
• Review and approval of material destructions.
• Approval of Material movement in Quality Hold
• Approver for material destruction declaration form, QA Rejection letter

Qualification:

• Degree in Science (Life Sciences, Microbiology, etc) / Engineering required with minimum 2 years’ experience in QC or QA Function
• Preferably with working experience in Medical Device / Pharmaceutical Industry.

Technical Skills:

• Demonstrated knowledge and experience in quality or operations function.
• Task oriented with proven experience in the delivery high quality work.
• Proficiency in Microsoft Office (PowerPoint) other tools required to develop training materials
• Good analyzing / decision making ability.
• Customer (internal and external) driven approach.
• Knowledge of Good Distribution Practices (GDP), GxP and validation
• Demonstrated knowledge and application of ISO9001, ISO13485 and other international standards preferable.
• Knowledge of manufacturing environment is a plus.

Interested parties, please apply through this link https://jnj-apac.talent-pool.com/projects OR click on APPLY button.

Alternatively, you can share your CV at [email protected]

EA License: 94C3609

Reg No: R1440247

Position Overview:

As the Quality Manager, you will be responsible for ensuring the highest quality standards in the development and production of biomedical products. You will lead and manage quality assurance activities across the production process, ensuring compliance with regulatory requirements, industry standards, and company policies. You will play a pivotal role in driving continuous improvement initiatives and fostering a culture of quality within the organization.

Key Responsibilities:

• Oversee and manage the company's Quality Management System (QMS), ensuring compliance with ISO 13485, FDA regulations, and other applicable standards.
• Develop, implement, and maintain quality assurance policies and procedures.
• Lead quality audits, internal and external inspections, and regulatory compliance assessments.
• Monitor and report on quality performance metrics, identifying trends and areas for improvement.
• Manage the resolution of non-conformances, corrective actions, and root cause analysis.
• Collaborate with cross-functional teams (e.g., R&D, Manufacturing, Regulatory Affairs) to ensure product quality throughout the product lifecycle.
• Ensure proper documentation and traceability for all quality-related activities.
• Train and mentor staff on quality processes and regulatory requirements.
• Maintain relationships with regulatory bodies, customers, and suppliers to ensure ongoing compliance and quality standards.

Reponsibilities:

Documentation:

Responsible for preparing Final QA documents and Submission in Customers portal.

Responsible for preparing the job routers.

Handling TPI and NDE activities:

Generation of issue notes for supplier activities.

Handle and support third party inspectors

Handle and support NDE activities

Responsible for collection and verification of supplier’ NDE process reports

Calibration and Maintenance of instruments:

Maintain master list for all the instruments under Quality department and production.

Regular calibration and maintenance procedures should be established to ensure continued accuracy and performance., periodically monitoring the calibration requirements

Communication:

Effective communication is vital in this role. QA communicate quality-related issues to relevant departments, including production and to Quality Control.

Reporting:

Reports to assistant Manager – Quality and assisting on ad hoc responsibilities

Safety:

Ensuring the safety of the quality control team and compliance with safety protocols is another important aspect of the job.

Requirements:

• Minimum Diploma in Material Engineering or relevant engineering discipline.
• At least 3 years of working experience related to the manufacturing environment, preferably from the oil & gas industry.
• Able to interpret drawings and technical documents
• Able to work independently and contribute to the team excellence
• Good technical competence & strong communication skills
• Good organizing and coordination skills
• NDE level 2 inspector is an advantage

Our client is a US MNC and a Fortune 500 Company that provides Design and Manufacturing solutions to the customers worldwide. They are currently hiring for a Quality Director and will like to invite interested candidate to submit your detailed resume to [email protected]

Quality Director

Responsibilities:

• You will be part of the site Management Team
• Manage entire site Quality system which includes Medical system
• Responsible for all product quality issues, including managing internal and external communication on product qualities.
• Identifies on-going quality issues and makes recommendations to improve current processes
• Interfaces with customers, suppliers, engineering and operational groups on quality related issues
• Responsible to lead 5S & 6 sigma initiatives for the Region
• Provides training in statistical concepts and techniques
• Establish, review & approve quality control methods and procedures
• Plays a key role to provide guidance to site with respect to maintaining quality excellence

Requirements:

• Degree in Mechanical or Electronic / Electrical Engineering or Quality Management with minimum 10 years relevant experience in Quality &/or Management capacity preferably in EMS environment & prior experience in handling FDA audit is preferred
• Excellent knowledge & implementation experience in Six Sigma
• Formal training in ISO Lead Auditor is a definite advantage
• Familiar with ISO-13485 & TL (Telecommunication ) system
• Strong skills in facilitation, analysis & problem solving
• Experience in analyzing of various processes barriers and using TPM methodology to drive improvements and inspection to support operations
• Candidates with Black Belt or Master Black Belt in Lean / Six Sigma will have added advantage
• Ability to work independently with excellent interpersonal relations and deep passion for driving product quality are essential

Job Description & Requirements

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

Quality Controller/GAP Coordinator

Job Description

The Quality Control/GAP Coordinator is responsible for ensuring all products received perishable and nonperishable are of standard as per the company’s specifications. This role must also ensure supply security and FIFO practices.

Scope: Singapore (Choa Chu Kang farm)

Working Days: 5.5

Reporting into: Head of Farm Operations

In This Role You Will (Responsibility):

· Ensure incoming and outgoing goods (perishable and non-perishable) meet company and GAP standards.

· Daily inspection of production areas to ensure compliance with company and GAP standards.

· Analyse quality data and summarise findings.

· Generate inspection reports.

· Conduct quality assurance reports.

· Conduct internal self-audits of processes and procedures.

· Prepare quality assurance documents in compliance with local regulations and GAP standards.

· Ensure quality testing (shelf-life samples) and laboratory microbial testing is done in accordance with GAP standards.

· Ensure staff training is done to comply with GAP and Food Safety requirements.

Traits

• Continuously learning and challenge the status quo.
• Willingness to join and grow with a dynamic company.
• Strong bias for action.

· Must be energetic and hands-on to take on new and challenging tasks and to work well with limited resources and a strong sense of accountability.

Assist operation in problem solving and execute improvement initiatives

Main duties and responsibilities :

1. Incoming QA(IQA) and Outgoing QA (OQA) Inspection
2. Quality Wall (QW) buy off
3. Weekly process audit
4. Non Conformance Material Report (NCMR)

Experience and knowledge :

1. Min "O” level with 3 years of related experiences in a manufacturing environment.
2. Knowledge of Microsoft (words, excel and ppt) is a must.
3. Knowledge of Stamping, Plating, Molding and Connector Assembly is an added essential.

Skill Required :

1. Good knowledge on measurement methodology and equipment (profile projector, TM scope, OGP smart scope).
2. Exposure in Process and QMS Audit.
3. Knowledge of Quality tools such as SPC and 7 QC tools.
4. Good interpretation of product drawing, specification and Inspection Plan.

Job Requirement :

1. Able to work independently
2. Able to work rotation shift

The Job:

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment
• Designing and analysing inspection and testing processes, mechanisms, and equipment
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks
• Undertaking root cause analysis of incidents requiring corrective action
• Ensure that corrective measures and deviation meet acceptable reliability standards
• Other ad hoc duties assigned

Requirements

• API Q1 and Q2 certifications
• Internal audit certification

Interested applicants can send their detailed resumes to [email protected] or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 7 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

Our client is an MNC specializing in advanced sheet metal fabricators with a focus on precision engineering and a precision machining service provider based in Singapore.

Job Highlights:

• Basic Up to $4000
• Working Location: Tuas (walking distance from MRT)
• Working days: 5 days (Mon-Fri) - Office Hours

Job responsibilities:

• Oversee in-progress and final product inspections.
• Approve first article submissions and ensure compliance with customer requirements.
• Monitor and improve quality standards continuously.
• Resolve quality issues with internal teams and external partners.
• Supervise and ensure proper calibration of measuring equipment.
• Review on non-conformances & approve disposition actions.
• Prepare 8D reports to address quality issues.
• Provide regular quality reviews and training sessions.
• Support product and process development for First Article Product.
• Assist in maintaining ISO compliance, including reports and follow-ups.

Job Requirements:

• Minimum Diploma in Mechanical, Manufacturing, or related Engineering field, or equivalent.
• At least 3 years of relevant experience is required for this role.
• Knowledge of measuring and statistical techniques.
• Familiarity with CMM machines.
• Ability to lead a team of quality operators.
• Class 3 driving license is a plus.

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

**We regret to inform that only shortlisted candidates will be informed.**

Lee Yu Qian (Lenore)

Registration Number: R24124538

EA License Number:18C9027

Key Responsibilities :

• To provide operational support for the Digital Ops Support, which includes:
• Collaborate with the product team (developers, product owner, designer, etc.) to handle product development, release management, infrastructure provisioning and deployment during the implementation
• Work closely with product development team to develop and release the requested features
• Work closely with Security Architect to integrate security best practices
• Identify and resolve environment automation problems in a timely fashion
• Post implementations provide handover the Digital Ops team
• Develop and maintain design and troubleshooting documentation in confluence
• Proactively identify areas of improvement and propose solutions.
• Design,develop and maintain robust testing environments, frameworks and plans for the whole range of functional and non-functional testing.
• Develop and manage testing plans for products in a collaborative, multi-function team environment.
• Advise on Quality Engineering practices and workflow.
• Provide execution and strategic oversight for testing plans and methods across the full life cycle from requirements gathering to development to delivery.
• Lead and direct team to identify blind spots, triage problems and take corrective actions.
• Elicit performance feedback regularly from end-users.

Qualification: Bachelor Degree in Computer Science/Computer Engineering or equivalent

Technical Skills

• Manual Testing: This is a mandatory requirement, with a minimum of 3 years of experience expected.
• Automation Testing: While not mandatory, it is considered a good-to-have skill, with at least 2 years of experience preferred.
• Performance Testing: This is also a good-to-have skill, with a minimum of 2 years of experience desired.
• Other Skills: Familiarity with Agile/Scrum methodologies, ITIL practices, and CI/CD processes is a good-to-have requirement, with 1 year of relevant experience preferred.

We regret to inform that only shortlisted candidates will be notified.

EVO Outsourcing Solutions Pte. Ltd

• RCB No. 202233837K

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (separate living arrangements provided, includes four round-trip tickets to Singapore annually)

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours (Monday - Friday)

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imagination thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

Team Intro

The TikTok Live QA team has been focusing on the high quality and the best user experience of TikTok Live products. Our team uses advanced autotesting tools and comprehensive quality assurance methods to continuously control the delivery of products. We are looking for passionate Quality Assurance engineers to join this fast growing industry.

Responsibilities:

1. Responsible for the quality assurance of ByteDance's live-streaming products;

2. Deeply involved in the product development process, coordinate with various roles to continuously deliver products with high quality;

3. Improve product quality and efficiency through technical means such as tool platform development, automated testing and performance testing;

4. Prospective technology research and application, applying appropriate technology to improve business quality.

Qualifications

Minimum Qualifications:

1. BS degree in Computer Science or equivalent majors, with at least one year of native or backend quality assurance experience;

2. Good computer foundation, master at least one of the programming languages: Python,Java,Go,PHP;

3. Abilities to design and execute complete testing plans for complex projects;

Preferred Qualifications:

1. Master Degree in Computer Science or equivalent majors

2. Good logical thinking and team communication skills;

3. Having systematic work experience in automated testing, performance testing, and quality system construction is preferred.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

About NETS

The NETS Group is a leading payments services group, enabling digital payments for merchants, consumers and banks across the entire payments value chain.

The Group operates Singapore’s national debit scheme enabling customers of DBS Bank/POSB, HSBC, Maybank, OCBC Bank, Standard Chartered Bank and UOB to make payments using their ATM cards or mobile devices at more than 130,000 acceptance points in the country as well as online payments.

Position Overview

Quality Checker team of Card Centre performs quality checks on every card mailers after card personalization, ensuring that we meet our service level on accuracy.

Key Responsibilities

• Responsible for performing quality checks on Bank cards
• Meeting Service Levels of the Banks
• Performing end day reconciliation for internal reporting
• Other ad-hoc duties

Requirements

• Minimun qualification, Nitec
• Prior working experience in production line highly preferred
• Meticulous & eye for detail
• Must be able to commit 5.5 days work week

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Check Credit Compliance in accordance to Bank's Credit Policy and internal Policies
• Perform security and documentation compliance checks
• Check & authorise Loan Disbursements and Facilities Line implementation
• Review data entries done by maker via the various systems
• Check reports on all transactions carried out by staff

Requirements

• At least 3 years of operations experience in company credit & loan operations
• Possess relevant experience in credit control - credit compliance review per credit policy, security documentation and perfection
• Review legal guidelines, legal conveyancing, facility limit management and collateral processing
• Must be responsible, committed and diligent; Be a good team player with integrity
• Able to work under pressure especially when deadlines are tight or when there is increased volume
• Works fast and in a meticulous manner
• Strong in PC skills and Microsoft Office (Excel, Powerpoint, Word)
• Good project management, system management, interpersonal and communication skills

Responsibilities:

Incident Management

• Respond to escalated incidents from L1 support, providing timely and effective resolution.
• Diagnose and troubleshoot complex technical problems across various technologies.
• Perform root cause analysis to prevent recurring incidents.
  Document incident resolution steps and maintain knowledge base articles.

Problem Management

• Investigate and resolve underlying problems affecting IT services.
• Proactively identify potential issues and implement preventative measures.
• Collaborate with other teams to address complex problems.

Change Management:

• Implement approved changes to IT systems, following established procedures.
• Ensure changes are implemented with minimal disruption to services.
• Validate successful implementation and document changes.
  

System Monitoring & Maintenance:

• Monitor the health and performance of IT systems.
• Perform routine maintenance tasks to ensure system stability and security.
• Identify and address performance bottlenecks.
  

Technical Expertise:

• Maintain in-depth knowledge of BMC Control-M, AWS cloud services, Windows and VMS operating systems, and security technologies.
• Stay current with industry best practices and emerging technologies.
• Provide technical guidance and mentorship to L1 support engineers.

Qualifications:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• 3-5 years of experience in IT support, with a focus on AWS, Windows, VMS, and security. BMC Control-M experience will be an added advantage.
• Strong understanding of ITIL framework and service management principles.
• Excellent analytical, problem-solving, and troubleshooting skills.
  Strong communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Relevant certifications (e.g., AWS certification) is a plus.
  

Key Skills:

• BMC Control-M administration and troubleshooting
• AWS cloud services management and support
• Windows and VMS operating system administration
• Security best practices and implementation
• Incident and problem management
• Change management
• System monitoring and maintenance
• Communication and collaboration
  

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492