Responsibilities:

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control

· Develop & review electrical related drawings, e.g. Single Line Diagram, MCC Schematic, Equipment layout, Cable ladder/tray routing layout

· Knowledge in Onshore/ Offshore standards (IEC, NEMA, IEEE & API)

· Prepare Electrical Load Analysis & List

· Familiar with Short-Circuit and Voltage Drop calculation

· Prepare & review Electrical MTO for projects

· Review Electrical equipment’s datasheet

· Strong knowledge in Low voltage MCC/Switchgear, UPS, VSD/VFD & Transformers

· Prepare specification for LV Switchgear, MCC, Transformers & VSD/VFD’s

• Reviewing of customers' specifications and drawings
• Define specifications and scope of work to contractors
• Execution of projects.
• Startup, testing, commissioning and troubleshooting of plants.
• Develop engineering capabilities and work with sales team on project proposal and bidding

Requirements:

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Able to communicate effectively in English at all levels, both verbally and in written reports

An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate. We regret only shortlisted candidate will be notified.

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

MKS is committed to being the highest quality and reliability provider of laser-based manufacturing systems for leading electronics and device manufacturers world-wide; helping them to optimize production of the materials, components and systems that are an integral part of the electronic devices in use today.

As part of the mission, the Quality Test Technician will be supporting EE Test Engineering in troubleshooting and repair activities on ESI PCBA/Control units.

Key responsibilities:

• Conducting First Article Test on new Subsystem, PCBA and Cable assemblies. Analyzing and determining hardware test requirements, supporting Test development activities.
• Maintain, Modify and Improve Test System hardware and fixtures.
• Support Engineers to deploy the new Test Fixtures at Production and external supplier. Resolve the Test Fixtures and Equipment issues on time.
• Perform hands-on assembly, set-up, testing, troubleshooting of PCBA and prioritize to resolve the issues.
• Support of FPY improvement activities and determines root cause of Manufacturing low Yield / Quality issues.
• Support Engineers to setup and conduct experiment/tests, compile and analyze data.
• Handle Field failures troubleshooting and provide updates to Engineering team to prevent future occurrences.
• Incorporate continuous improvement concepts and techniques into all aspects of Job.
• Inspect incoming mechanical parts and materials to ensure they meet required specifications and quality standards.
• Performs other duties as assigned by supervisor based on business needs.

Requirements:

• Minimum of three (3) years of experience in PCBA Testing and troubleshooting is preferred.
• ITE / Diploma or higher in engineering or equivalent.
• Able to read and interpret Electrical Schematics, Specifications and Manufacturing manuals.
• Experience with test equipment e.g. function Generator, Oscilloscope etc.
• Good written and verbal English language communications skills.

Responsibilities & Requirements:

The successful candidate for this role is expected to have a strong background in Regression and end-to-end Testing, with a deep understanding of JSON, API, and SQL. Familiarity with financial instruments and entities will be considered a plus.

This role requires an individual who is a fast learner, able to quickly comprehend business requirements and translate them into effective test cases using our in-house automated regression tools.

Skillset (Must have)

• Proven experience as a Software Test Engineer or similar role.

• Proficient in JSON, API, and SQL.

• Experience in regression and end-to-end testing.

• Strong problem solving skill and attention to detail.

• Excellent communication skill.

• Ability to learn quickly and work in a fast-paced environment.

• Experience in writing clear, concise, and comprehensive test plans and test cases.

• Willingness to support BAU operations as needed.

Skillset (Good to have)

• Familiarity with financial instruments and entities.

• Experience with performance testing.

• Knowledge of Agile/Scrum development principles.

• Experience with automated testing tools.

• Understanding of coding and scripting for automation purposes.

• Knowledge of continuous integration and continuous delivery (CI/CD) processes.

• Familiarity with version control systems like Git.

• Knowledge of software QA methodologies, tools, and processes.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Scope:

· Manage QC data of assigned projects, including performing QC checks/audits on interviewers via telephone validations, audio audits, onsite checks, and observations

· Supervise the Data and QC Team to ensure that work is done in accordance with project specifications.

· Review and rectify data discrepancies, and upkeep multiple datasets by compiling, cleaning, and sorting information according to established data fields to support overall data management.

· Script and conduct User Acceptance Testing (UAT) - checking, formatting, reviewing, and testing survey links for questionnaires.

· Ensure data consistency and accuracy across multiple variables and different datasets in accordance with project specifications and the conventions used within the dataset.

· Perform data coding, cleaning, and processing to ensure it is in accordance with industry standards of SSOC and SSIC or the related code frame provided.

· Manage longitudinal panel data, including merging and stacking panel data across different waves via syntax.

· Conduct operational data analysis and reporting: using SPSS/Excel to perform data validation and updates on key variables to identify issues related to data collection and quality, and to generate quality reports.

· Use SPSS to visualize relevant key variables using tables or other relevant visualization tools to identify possible issues and understand the breakdown of these key variables for decision-making.

· Train interviewers in accordance with project specifications to ensure that the quality of interviews is kept at high standards.

· Provide timely feedback to the Field team based on validation results to rectify any data discrepancies.

· Evaluate and generate reports on the quality of data collected by the interviewers

· Liaise with vendors on project-related logistic matters

· Liaise with clients to process data within their requirements

· Assist in vetting translations of survey questionnaires when required

Requirements:

· Bachelor’s degree with at least 1 year of experience working with data related to government-related research projects or the market research field

· Experience in coding SSOC and SSIC

· Prior experience in training new staff

· Keenly interested in data analysis

· Possess data management skills and computer knowledge, programming knowledge, and web development experience in SPSS, Python, R, and HTML.

· Know how to use and have experience using Case Management System, SPSS DimensionNet, and Qualtrics for data collection; solid knowledge of writing SPSS syntax for data logic checks and data processing

· Good interpersonal and communication skills

· Meticulous and detail-oriented

· Ability to prioritize workload, be resourceful in getting things done to meet deadlines, and cope well with stress

Additional Information:

· Contract duration: 12-month contract, renewable

· Working days and hours: Mon to Fri 9am to 6pm

· Location: Commonwealth, Evans Road

About Us

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible. Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day. To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the Team

You'll contribute to content strategy and planning, and have an understanding of how regional campaigns support business goals. You're independent, proactive, and comfortable with ambiguity and problem-solving. You have experience juggling multiple projects and prioritizing them to have the greatest impact on your team and the company. You're also a strategic communicator, helping to define product narratives in conjunction with your team. You'll write and edit campaign content, GTM materials such as video scripts, in-app feature webpages, newsletter copy, and push notification copy, as well as apply and evolve our style guidelines. You have a strong intuition for writing clear, concise copy that is easily translated and localized for our global audience.

Job Description:

1. Responsible for the content ecosystem of international short video platforms. Develop a deep understanding of content, analyze business data and user needs to identify key issues in content production, distribution, and consumption. Set quantifiable goals and implement strategies to achieve them.
2. Conduct quantitative data analysis and qualitative observations to address critical issues in platform ecosystem evolution. Provide effective insights and leverage product mechanisms, content/recommendation strategies, and AI technologies such as machine learning to create a positive content consumption and creation environment.
3. Gain in-depth familiarity and understanding of content recommendation processes and principles. Collaborate with recommendation algorithm teams and analysts to validate the effectiveness of various recommendation strategies and drive continuous optimization.

Qualifications

Minimum Qualification

1. Bachelor's degree or above
2. With more than 3 years of experience in product or strategy roles. Strong content understanding, with experience in content strategies, scheduling strategies, recommendation strategies, or product recommendations preferred.
3. Excellent communication, collaboration, and project management skills. Resilient under pressure, with a strong sense of responsibility and goal orientation. Capable of addressing complex problems with a focus on key priorities and a long-term vision.

Preferred Qualification

1. Strong data analysis and logical thinking skills.
2. Individuals who are deep consumers and creators of content products and those who frequently use international content platforms.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Strong organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Basic Salary + Fixed Allowances (UP$3600) + Incentive
• Variable Bonus + Meal Provided
• Working days: 5.5 Days
• Working Location: Jurong East
• Excellent Welfare & Benefits

Job Scope

• Assisting the Restaurant Manager in overseeing of the service of the Restaurant.
• In-charging the restaurant when Restaurant Manager is not around.
• Greeting and coordinating the guests’ seats and assign guests to tables suitable to the size of each group.
• Recording and reporting all food-related complaints to the Chef immediately.
• Ensuring team briefings are carried out before each service period.
• Promoting the restaurant by establishing a loyal and regular customer base, maintaining a regular customer database and personalising customer service.
• Maintaining the highest standard of cleanliness, the maintenance of furnishings and equipment and the proper set up of in the Restaurant and connected areas or pantries.
• Participating in monthly physical stocktake of the Restaurant, including but not limited to glassware, plate and crockery.
• Assisting the Restaurant Manager in implementing and developing training programs.
• Monitoring inventory levels.
• Preparing daily report when Restaurant Manager is not around.
• Reporting restaurant’s situation daily to Restaurant Manager.
• Performing miscellaneous job-related duties as assigned.

Requirement

• GCE O Level and above
• 1 – 3 years related experience in F&B Managerial positions

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Develop and manage patient safety incident frameworks, conduct investigations, and analyze incident data.
• Implement and coordinate patient safety programs, including safety reviews, committees, and campaigns.
• Identify safety risks, design preventive measures, and collaborate with clinical risk management for improvements.
• Provide training, create resources, and facilitate knowledge-sharing to enhance organizational capabilities.
• Offer administrative support to safety committees and collaborate with stakeholders for quality improvements.

Requirements:

• Minimum Degree in Nursing, Social Work, or Allied Health disciplines.
• 0–4 years of relevant healthcare experience, especially in patient safety or clinical quality improvement.
• Proficient in MS Office applications; knowledge of basic statistics is advantageous.
• Demonstrates strong organizational, analytical, and communication skills; meticulous and proactive.
• A good team player with the ability to work independently and engage effectively with stakeholders.

Interested candidates who wish to apply for the advertised position, please click on “Apply Now”. Alternatively, you may email us an updated copy of your resume (Attn: HUEY) for a confidential discussion.

Job Code: HUEY

EA Reg No: R24122358 (YEO HUEY CHEEN)

EA License: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

We regret that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at https://www.persolkelly.com.sg/policies. I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Purpose:

• To be responsible for managing the interactions with third party organisations that supply QA incoming materials and/or services to GSK.
• To manage material release for incoming materials, supplier change notifications and new material management.
• To provide Quality oversight to logistics management and warehouse operations.

Key Responsibilities:

Supplier Management

• Provide QA oversight of Supplier management activities on site to achieve compliance with company policies and government regulations as assigned.
• To participate (Executive 1) and to represent the site (Executive 2) for Supplier Management business processes to drive improvements and share best practises across the GSK Vaccines network.
• Process owner/support supplier complaint process for QA incoming materials. Lodge supplier complaints and ensure suppliers identify the root cause and associated CAPA's to prevent recurrence of supplier quality issues.
• Review and track supplier-related CAPA for timely closure.
• Maintain inspection readiness, conduct supplier assessments for both new and current service providers in a timely manner.
• Maintain the approved supplier listing and audit schedule in a state of compliance and accuracy.
• Assess supplier change notifications in a timely manner and escalate where necessary especially in situations with supply impact.
• Initiate and review deviations/change control/CAPA associated with incoming material.

Executive 1: Minor deviations and CAPA

Executive 2: Minor, major deviations and CAPA

• Work closely with site user and Global stakeholders for Supplier management related matters

QA Raw Material Release and Warehouse oversight

• Support incoming material documentation review and release to recommend and confirm Usage Decision (UD) of raw material
• Ensure that material document file (MDF) is complete and accurate before disposition of material in SAP
• Ensure that system is in place for filing and archival of MDF
• Initiate and review deviations/change control/CAPA associated with incoming material releases.
• Ensure that all deviations/change controls are closed or assessed for impact on the release of the material prior to release the QA-controlled incoming material
• Provide QA oversight to warehouse such as attending warehouse tier, conduction GEMBAs, inspection readiness and warehouse related deviations, CAPAs and change control

Decision Making:

Proposals & Recommendations

• Propose improvements to work processes, with basic awareness of business requirements.
• Deviation investigations and assessments
• In addition for QA Executive 2:
• Able to provide QA oversight on routine situations independently and complex situations with supervision (deviations, changes, system issues, compliance matters)
• Able to manage simple department projects (e.g. continuous improvement) with supervision
• Greater awareness of business requirements and to highlight considerations where there is a need for escalation

Skills:

Professional

• At least University basic degree in a Science or Engineering discipline

Technical

• A good understanding of cGMP regulatory and legal requirements as applied to quality assurance of pharmaceuticals manufacturing
• User experiance with SAP will be prefered
• Ability in handling and organizing multiple workflows

Business

• Ability to apply optimal quality assurance standards to promote a business edge
• Ability to facilitate business activities commpatible to international regulatory environment
• Ability to communicate effectively within the site organization and across the network

Competencies:

• Working knowledge of FDA/EU/ICH/WHO as well as all other relevant reuglatory and technical guidelines
• Possess Analytical and Quality performance mindset
• Demonstrate professional & ethical integrity
• Fluency in the English language
• Demonstrates sense of urgency
• Ability to work both as an individual contributor and as a team player.

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

Job Description

• To coordinates the process of product registration and market access approval in the designated countries including providing all required documents and certificates within the specified timeframe proactively to complete product registration.
• To provide advice to internal and external teams in interpreting relevant guidance documents and standards.
• To contact local authority and organization for both regulatory problems solving and obtain updated information on current and developing regulations.
• To review and approve documents to support Post Market Change notification (including labelling changes) to comply with international regulations and standards.
• To remain up to date on regulations and communicate any key changes to stakeholders in the broader organization.
• To provide training when necessary and assist with the development of the respective countries’ Regulatory Affairs infrastructure to facilitate greater speed to market.
• To take charge of QA (complaint reporting etc) for all subsidiaries.

Qualification

• Degree/ Diploma in Biomedical engineering or science or QA/RA related field
• Minimum progressive 3 years of QA/RA working experience in medical device manufacturing industry

Interested candidate, please email to [email protected]

Leon Leong De Cong

R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

The Nursing Quality Clinical Instructor is responsible for delivering high-quality education and training to nursing staff, ensuring adherence to best practices in patient care and nursing standards. This role involves mentoring, evaluating clinical competencies, and fostering a culture of continuous improvement in nursing practices.

Key Responsibilities:

• Education and Training:Develop, implement, and evaluate nursing education programs that enhance clinical skills and knowledge.
  Conduct regular training sessions, workshops, and seminars for nursing staff on quality improvement, patient safety, and evidence-based practices.
  
• Clinical Mentorship:Provide hands-on clinical instruction and mentorship to nursing staff, guiding them in delivering high-quality patient care.
  Conduct competency assessments and evaluations to ensure staff proficiency in clinical skills.
  
• Quality Improvement:Collaborate with nursing leadership to identify areas for quality improvement and develop strategies to address them.
  Participate in the development and implementation of quality assurance initiatives, policies, and procedures.
  
• Monitoring and Evaluation:Monitor nursing practices and outcomes, utilizing data to inform decision-making and drive improvements.
  Prepare reports on training outcomes, competency evaluations, and quality metrics.
  
• Collaboration:Work closely with interdisciplinary teams to promote a culture of quality and safety across the hospital.
  Serve as a resource for nursing staff regarding clinical best practices and quality improvement initiatives.
  

Qualifications:

• At least an Advanced Diploma in Nursing
• Minimum of 3-5 years of clinical nursing experience, with a focus on quality improvement or education.
• Previous experience in a clinical instructor or nurse educator role is highly desirable. SSN may apply for this position.
• Possess a valid SNB.
• Strong clinical knowledge and expertise in nursing practices.
• Excellent communication and interpersonal skills, with the ability to inspire and motivate others.
• Proficient in data analysis and the use of quality improvement tools.
• Ability to work collaboratively in a team-oriented environment.
  

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

Responsibilities (include but are not limited to):

· Work with the Manufacturing department as a production area Quality Assurance representative

· Coordinate and facilitate Quality Assurance related production and production related activities

· Ensure timely issuance of production records, procedures and labels

· Ensure timely assessment and closure of discrepancies, Deviations and Change Controls

· Review batch-related documentation, and ensure resolution of issues to release product

· Communicate lot disposition pending issues to Management

· Ensure approval and timely delivery of Final Product

· Ensure that products are manufactured in compliance with regulatory and GMP guidelines

· Review and approve Manufacturing and Validation documents for Regulatory and Kite compliance

· Review and approve Manufacturing Production Records

· Compile and verify all batch related documents into a Final Product lot disposition package

· Provide Quality Assurance support resolving material, in-process product, final product, environmental, facility and equipment manufacturing issues

· Review and disposition disposable raw materials and components for GMP use

· Review equipment and facility technical and investigation reports

· Review and approve proposed changes to systems, procedures, methods, and submissions to regulatory agencies

· Gather metric information for use in continuous improvement of areas of responsibility. Report to management as needed.

· Perform other duties as required

Requirements:

• Min Diploma / Degree in Chemical Process Technology, Foodscience, Biotechlonogy, Biology, Biomedical Sciences, Science or its equivalents
• No Experience Needed, Full training/ on the job guidance will be provided
• Able to start immediately

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected] (Attn: QA Specialist)

Thank You.

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Strong organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilites:

• To plan, develop and implement the organizational strategy and framework for patients’ relations and positive experience in the patients' journey of care
• To oversee and be responsible for the communications and patients’ relations matters of through befriending and building of a strong rapport with the patients and their family.
• To collaborate with HODs and line staff to operationalize the patients experience strategy.
• To provide expertise and resources in educating the Head of Departments and line staff in the philosophy and techniques of patients experience improvement.
• To set benchmarks/targets for evaluating the effectiveness of the patients’ relations services and programmes for the purpose of continuous improvement.

Principal Responsibilities

1) Patients Relations Engagements

• To establish contact with patients and their family (next-of-kin or spokesperson or designated caregiver) at the point of referral (hospital tour) or upon admission to the wards.
• To be the point person of the hospital for the patients and their family.
• To implement workflow to ensure a positive experience at every touch point with patients and their family.
• To identify caregivers stress and discern sensitive issues and offer counsel/suggestions to solve the problem or to handle the situation.
• In any crisis situation to advise and support the Head of Department and the staff on the appropriate approach and action to be taken to diffuse anger and tension, at the same time relate to the patient and his/her family to offer empathy and counselling, where necessary, to calm the situation. Offer practical solutions and support to the patient and the family where caregiver stress has been identified.
• Identify and assist/support staff andHead of Departments who are struggling with patients’ relations and communication issues.
• To supervise, train and mentor the team of Ward Ambassadors who are part of the Patients Relations Team.
• To review and assist in handling feedback and complaints received through the Patients Feedback Form with appropriate (verbal/written) responses.

2) Patients Experience Programmes

• To work with Corporate Communications, Pastoral Care Services and Nursing in organizing patients’ engagement events.
• To develop programmes and events to promote patients’ engagement and improve patients experience.

3) Family/Caregivers Engagement

• To proactively identify caregivers stress and engage caregivers in conversations for the purpose of offering empathy and support, solutions and resources that will enable them to cope better.
• To collaborate with external agencies like Caregivers Alliance in supporting the caregivers and post discharge follow up.
• To participate in ward processes relevant to patients’ relations and experience.

Secondary Responsibilities

• To provide training in dementia care to staff as well as to caregivers.
• To carry out duties and responsibilities that may be assigned from time to time.

Job Requirements

• min. Diploma/Degree in Public relations, Communications and Counselling related field of study
• Prior 3-4 years of relevant working experience in hospitality or healthcare public relations or caregiver support and counselling.
• Minimum 4-5 years relevant experience in a managerial role.
• Prior patient relations work experience from Healthcare/Social Service industry
• Has excellent interpersonal and communication skills.

Interested applicants, please email your updated CV to [email protected] or WA 97527630 for more information.

We regret to inform that only shortlisted candidates will be contacted.

EA Personnel No: R23116144

EA Personnel Name: Lim Ruo Yi, Rachel

Company Registration Number: Recruit Express Pte Ltd (99C4599)

• The Senior Supplier Quality Specialist will reports to the Supplier Quality Supervisor will be responsible to support the development and maintenance of Supplier Quality Management business processes to comply with all applicable regulatory requirements and Quality Policies and Procedures.
• You will ensure oversight on the site’s supplier quality and material release processes are executed in accordance to Quality Policies and Procedures

Major Responsibilities:

• Provide Leadership for the Supplier Quality team as a senior specialist in the absence of the manager and Supervisor
• Ensure compliance with applicable policies, processes and procedures, contributing to the execution of strategies and oversight of Supplier Quality programs
• Execute and provide oversight on procedures to ensure that incoming materials including raw materials and commodities received at our Company to meet approved company policies and processes.
• Manage investigations arising from materials nonconformity with cross functional team.
• Serves as the primary contact to review and follow up on Supplier Qualification documentation (e.g. Approved Supplier Lists, Quality Questionnaires, customer complaints, Supplier packages etc.) and activities (e.g. supplier audits, supplier review, supplier change notification etc.)
• Prepare, maintain and facilitate review of the GMP documentations (Quality Technical Agreement and Internal Quality Technical Agreement)
• Coordinate site supplier quality issues (such as deviations), audit assessments and subsequent follow-up actions.
• Support global supplier quality team initiatives or other site improvement projects. Perform review/audit of Incoming material inspection package which includes receiving, sampling and testing compliance. Completion of Incoming Raw Material checks and release and the administration of Quality Logs, e.g. QA Hold.Review / Approve material master data set up for new material introduction.

Requirements

• Min Diploma / Degree in any science / engineering courses
• Min 2 years of Supplier quality exp or handle complains before from suppliers

$4K to $5K

office hours

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• The Senior Supplier Quality Specialist will reports to the Supplier Quality Supervisor will be responsible to support the development and maintenance of Supplier Quality Management business processes to comply with all applicable regulatory requirements and Quality Policies and Procedures.
• You will ensure oversight on the site’s supplier quality and material release processes are executed in accordance to Quality Policies and Procedures

Major Responsibilities:

• Provide Leadership for the Supplier Quality team as a senior specialist in the absence of the manager and Supervisor
• Ensure compliance with applicable policies, processes and procedures, contributing to the execution of strategies and oversight of Supplier Quality programs
• Execute and provide oversight on procedures to ensure that incoming materials including raw materials and commodities received at our Company to meet approved company policies and processes.
• Manage investigations arising from materials nonconformity with cross functional team.
• Serves as the primary contact to review and follow up on Supplier Qualification documentation (e.g. Approved Supplier Lists, Quality Questionnaires, customer complaints, Supplier packages etc.) and activities (e.g. supplier audits, supplier review, supplier change notification etc.)
• Prepare, maintain and facilitate review of the GMP documentations (Quality Technical Agreement and Internal Quality Technical Agreement)
• Coordinate site supplier quality issues (such as deviations), audit assessments and subsequent follow-up actions.
• Support global supplier quality team initiatives or other site improvement projects. Perform review/audit of Incoming material inspection package which includes receiving, sampling and testing compliance. Completion of Incoming Raw Material checks and release and the administration of Quality Logs, e.g. QA Hold.Review / Approve material master data set up for new material introduction.

Requirements

• Min Diploma / Degree in any science / engineering courses
• Min 2 years of Supplier quality exp from Pharma industry

$4K to $5K

office hours

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

About Us

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible. Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day. To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the Team

You'll contribute to content strategy and planning, and have an understanding of how regional campaigns support business goals. You're independent, proactive, and comfortable with ambiguity and problem-solving. You have experience juggling multiple projects and prioritizing them to have the greatest impact on your team and the company. You're also a strategic communicator, helping to define product narratives in conjunction with your team. You'll write and edit campaign content, GTM materials such as video scripts, in-app feature webpages, newsletter copy, and push notification copy, as well as apply and evolve our style guidelines. You have a strong intuition for writing clear, concise copy that is easily translated and localized for our global audience.

Job Description:

1. Responsible for the content ecosystem of international short video platforms. Develop a deep understanding of content, analyze business data and user needs to identify key issues in content production, distribution, and consumption. Set quantifiable goals and implement strategies to achieve them.
2. Conduct quantitative data analysis and qualitative observations to address critical issues in platform ecosystem evolution. Provide effective insights and leverage product mechanisms, content/recommendation strategies, and AI technologies such as machine learning to create a positive content consumption and creation environment.
3. Gain in-depth familiarity and understanding of content recommendation processes and principles. Collaborate with recommendation algorithm teams and analysts to validate the effectiveness of various recommendation strategies and drive continuous optimization.

Qualifications

Minimum Qualification

1. Bachelor's degree or above
2. With more than 3 years of experience in product or strategy roles. Strong content understanding, with experience in content strategies, scheduling strategies, recommendation strategies, or product recommendations preferred.
3. Excellent communication, collaboration, and project management skills. Resilient under pressure, with a strong sense of responsibility and goal orientation. Capable of addressing complex problems with a focus on key priorities and a long-term vision.

Preferred Qualification

1. Strong data analysis and logical thinking skills.
2. Individuals who are deep consumers and creators of content products and those who frequently use international content platforms.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Moore Stephens LLP is looking for a Assistant Manager to join our team. We are looking for someone with a passion for improvement; both in our processes and in yourself. You will be responsible to help us streamline and enhance our audit methodology and processes using CaseWare, IDEA and other audit tools. You will be a specialist in the application of the full suite of auditing standards issued by the International Auditing and Assurance Standards Board (IAASB) and ethical standards issued by the International Ethics Standards Board for Accountants (IESBA). You will help to ensure the highest levels of quality and compliance in the firm, through the development of audit policies, procedures, and methodology, participation in quality reviews, and consultations with the audit practice.

Responsibilities:

• Be part of the Firm’s technical team in reviewing audit policies and procedures in response to professional auditing and ethical standards.
• Participate in the development and enhancement of the firm’s system of quality management.
• Develop audit support content in CaseWare and offline auditing templates to support compliance with professional auditing and ethical standards.
• Provide audit technical support, including CaseWare-related matters, to the audit practice by way of formal and informal consultations to support high quality audits.
• Support professional learning and development in the areas of audit methodology, ethics, as well as the use of CaseWare and other audit tools.
• Provide coaching to engagement teams to improve the quality of the audit file, and identify opportunities for audit improvements and efficiencies.

Requirements:

• Knowledge of the full suite of auditing standards issued by IAASB, and ethical standards issued by IESBA.
• Experience in the use of CaseWare, IDEA, and CaseWare Financials
• At least 3 years of audit experience, preferably with large/ medium size public auditing firms

Quality Assurance Manager (Biopharma/CBD/1 Year Contract)

Role Purpose:

The Responsible Person, Quality Assurance Manager Australia and New Zealand, will work collaboratively with relevant stakeholders to implement & maintain the local Australian and New Zealand QMS and will work with internal & external stakeholders to ensure quality requirements are met for organisation products, throughout the distribution network, and within Australia and New Zealand, all the way to patients.

Key Responsibilities:

• Establishes and maintains the Quality Management System in Australia and New Zealand to ensure that it meets local regulatory and industry standards and organisation expectations.
• Support maintenance of relevant licenses.
• Manages local process of change control, deviation, CAPA, complaint management and supplier management.
• Manages local Quality Management Review process.
• Participates in organisation’s Quality Escalation process for critical quality issues, and regulatory compliance issues.
• Ensures up to date organograms, training curricula pertaining to GMP/GDP, training records, CVs, and Job Descriptions are in place for local affiliate personnel working on quality/distribution matters.
• Establishes and maintains the Affiliate Quality Manual and GMP/GDP procedural documents.
• Establishes and maintains the Quality Agreement with 3PL/4PL and local GMP/GDP related suppliers/service providers, as required.
• Reviews Annual Product Quality Reports (if applicable)
• Ensures shipping conditions match the product license/product label particulars and transporters are appropriately qualified.
• Ensures premises and/or equipment used are reviewed regularly to ensure they are adequate to allow the handling, storage, and distribution of medicinal products in a manner that ensures the maintenance of product quality.
• Supports Customer Services with enquiries of a GDP nature such as delivery issues, transportation conditions, disputes, etc.
• Working with 3PL/4PL, provides guidance on supply related issues.
• Arranges authorized relabeling/repackaging in cooperation with 3PL/4PL (where applicable)
• Supports the management of quality and distribution complaints.
• Supports the investigation of fraudulent and counterfeit medicinal products.
• Manages product return and destruction.
• Manages local recalls and participating in supplier’s recall challenge or perform local mock recall, as needed.
• Qualifies and manages local 3PL/4PL and supports audit of 3PL/4PL.
• Qualifies and manages local GMP/GDP related suppliers/service providers, auditing and approving these according to local requirements.
• Assure customers validations and adequate records compliance to organisation QA requirements are established and maintained for all local distributors/customers.
• Collaborates with RA to support inspections and audits.
• Manages the Affiliate self-inspection program.
• Supports audit of distributor (where applicable).
• Collaborates with RA to implement activities for new product launch and product life cycle management.

Knowledge, Experience & Skills:

• Highly organized individual with a strong work ethic and ability to work flexibility and independently.
• Demonstrates proficiency in Good Manufacturing Practices (GMPs) and/or Good Distribution Practices (GDPs) and knowledgeable about the specific requirements for Australia and New Zealand.
• Demonstrates proficiency in application of QA principles, concepts, industry practices, and standards.
• Demonstrates proficiency in Quality Systems processes (Deviation, CAPA, Change Control, Complaints, etc.)
• Demonstrates a knowledge of regional/local regulatory requirements and industry standards.
• Demonstrates strong verbal, written, and interpersonal skills in English.
• Demonstrates proficiency in Microsoft Office applications, particularly, WORD, Excel, PowerPoint, and Teams. Familiarity with technology platforms such as Veeva Vault, SAP ERP, etc.
• Working knowledge of Risk Management tools (e.g., Failure Mode Effects Analysis (FMEA) is preferred.

Typical Educational Experience & Competencies

• Bachelors’ degree and 7+ years of relevant experience in a GMP or GDP environment-related field
• Masters’ degree and 5+ years of relevant experience in a GMP or GDP environment related field.
• Ability to work on own initiative as well as display strong teamwork skills.
• Demonstrates clear personal responsibility for own work, in terms of both the quality of the work and the manner in which it is performed. ‘
• Ability to support change and respond to change requirements by continually striving to improve working processes and systems, consistent with the organisational strategy.

EA License No. 01C4394 • RCB No. 200007268E •EA Registration No. R22109454 Malcolm Lee Jun Hao

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Position : Pest Control Technician

• 5.5 Day (Mon-Fri 9am-6pm, Sat 9am-1pm)
• Basic Salary: $1800 to $2500 + $500 Attendant allowance + High OT Payout
• Location: Gambas, Sembawang

Job Requirements:

• Relevant experience is required
• Full-time NEA Vector Control Technician License
• Able and willing to do OTs (OTs will be paid accordingly)
• Class 2B Driving Licence / Class 3 Driving Licence

Key Duties & Responsibilities:

• To carry out DETAILED INSPECTIONS and to administer appropriate pest management plans to assist with eradicating the pests and provide QUALITY SERVICES to customers’ premises.
• Able to perform pest control works at residential, commercial, industrial & food establishments.
• Most of the jobs will be conducted within the F&B premises.

Benefits:

• Commission/Incentives and excellent career prospects.
• Yearly Bonus after completion of 1 year (Base on performance).
• Medical benefits and welfare.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

1. Local motor panel control function design and prepare single line drawing with autocad sodtware.

2. Revise drawings based on instructions/ comments from customer.

3. Prepare submission for shop drawing, details drawing, as-built drawing using Autocad.

4. Maintaining the drawings reports and records.

5. Make parts explosion list (details in part list).

6. Any other ad hoc duties.

7. Good attitude with an eye for details

Job Requirement

1. ITE or Diploma in Electrical or electronic Engineering.

2. Min 1-2 years working experience with AutoCAD or equivalent

3. Can use Microsoft Office software for documentation making

4. Independent and have a sound decision making

5. Experience in Electrical wiring & diagram preferred

Interested candidates can email your resume to email address: [email protected]. We regret that only shortlisted candidates will be notified.

Quality Operations Associate must assist site management to oversee the quality system execution on the manufacturing and production areas at all times.

The personnel are required to observe, document, discuss, and report quality adverse events related to the manufacturing of the product and are responsible to ensure highest quality and compliance of released batches.

Responsibilities:

• Main responsibilities include overseeing batch record review and incoming material quality audit
• Provide quality oversight of GMP manufacturing and manufacturing support, including technical operations, engineering, QC laboratory and supply chain activities
• Review completed incoming material inspection packages, Batch Records, Manufacturing Logs, product changeover/line-clearance activities and administration of Quality Logs, e.g., QA Hold, QA tag out
• Release incoming material, process, and product batches
• Participate in investigations arising out of non-compliance in incoming materials, QC testing, manufacturing processes, warehousing, and product
• Participate in change management, including change coordinator and/or QA oversight roles to ensure change plan is managed and complies with applicable policies
• Ensure site and global quality compliance
• All other responsibilities of QA Ops related.
• Any other task as assigned by Supervisor/Manager
• Based in Tuas

About You:

• Bachelor Degree with at least 1-2 years' experiences in pharma or biotech facility preferably familiar with biopharma QA Operations. Fresh graduates with GMP internship experience are welcome to apply
• Knowledge of quality management system, current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP) in a pharma or biotech facility
• Relevant QA Operations background from pharma or biotech environment is preferred
• Familiar with Health Authorities standards (e.g., FDA CFR and EU)
• Must be team player, meticulous, strong analytical and organizational skills

Duration : 06 months. Option to extend/convert subject to performance review.

Based in Tuas.

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Responsibilities:

• Oversee the development, implementation, and management of the qualification processes for the company's products across all global markets
• Ensures that all products meet the highest standards of quality and compliance with international regulations and customer expectations.
• Lead a team of qualification specialists and work closely with other departments, including project management, product design, regulatory and compliance, production, product management and external parties like suppliers and contract manufacturers to ensure seamless qualification processes.
• Develop and implement global qualification strategies aligned with the company’s business objectives.
• Oversee the development and execution of qualification plans for new products and updates to existing products
• Responsible for series process and product quality for all products manufactured by external contract manufacturers.
• Identify and mitigate risks associated with product qualification and compliance
• Engage with customers to understand their qualification needs and expectations.

Requirements:

• Degree/Masters in Engineering
• Experience in Electronics Industry
• Global Experience will be a plus
• At least 10 years of experience in Quality

Account Manager:
Kerwin Tan Kai Bin (R1331624)
[email protected]
EA16S8107