• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Configure semiconductor backend equipment.
• Align equipment/modules and perform vision alignment and calibration.
• Conduct machine checkout procedures.
• Provide technical support on-site, both domestically and internationally.

Requirements:

• Nitec in Engineering or equivalent.
• At least 1 year of relevant working experience
• Proficient in machinery automation, including electrical, servo, sensor, and pneumatic systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities

· The essential tasks of Assistant Field Service Engineer consist of, but are not limited to the following:

· Support start-up, contract maintenance and other service activities with emphasis on safety and protection.

· Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.

· Participate in service and repair of gas detectors, safety activities, emergency response, breakdown calls and ad hoc projects.

· Manage all orders efficiently until fulfilment stage, by working closely with Service team.

· Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.

· Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency. To provide support to other service activities that may be assigned in the course of work

· Effective communication of technical information to employees, customers and external parties in an accurate and concise manner in both a written and verbal media.

· To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

Requirements

· NTC 2 or Diploma in Electrical/Process Instrumentation/Mechanical/Mechatronics Engineering.

· Preferably 3-5 years’ experience in service/engineering position in oil & gas, process industry.

· Knowledge in Electrical & instrumentation is pre-request.

· With class 3 driving license (not 3A).

· Candidates without relevant experience are welcome to apply.

To apply, please visit to www.gmprecruit.com

To find out more about this opportunity, please contact Lionel Liew at [email protected].

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

• Supervise testing and commissioning of electrical equipment on-site and manage the review and submission of site acceptance test reports.
• Review and interpret Single Line Diagrams and Electrical Schematic Drawings.
• Support electrical equipment installation inspections to ensure compliance with standards.
• Participate in site activities and meetings with clients and contractors.

Requirements:

• Diploma in Electrical Engineering.
• At least 3 years of site installation, testing, commissioning and maintenance testing experience in Low/Medium Voltage Electrical Equipment.
• Possess initiative and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Oversee contract execution and monitor installation progress, ensuring timely delivery through coordination with clients, consultants, and subcontractors.
• Prepare and review method statements, shop drawings, technical submissions, and work progress reports for M&E-related tasks.
• Liaise with stakeholders to resolve technical and site issues, and coordinate with authorities for inspections, testing, and commissioning.
• Assist in procurement of materials, equipment, and labour within budget while supporting project negotiations.
• Apply expertise in Data Centers, DfMA, and specialized systems such as VAV/VRV, chillers, chilled water pipes, and lighting control systems.

Requirements:

• Diploma in Mechanical/Electrical Engineering or equivalent.
• At least 2 years of experience handling and monitoring the progress of projects in Construction industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Project Engineer (M&E)

Responsibilities:

· Site preparation, coordination, and submission document preparation

· Stakeholder management: customers, consultants, sub-contractors, vendors

· Effective communication with all stakeholders

· Work schedule, manpower, and resource planning

· Interpretation of engineering drawings and basic calculations/design

· Safety management system coordination

· Project progress reporting and follow-up

· Compliance with Singapore standards and Code of Practice

· Ad-hoc tasks assigned by reporting manager

Requirements:

· Recognized Degree in Electrical/Mechanical Engineering or related field

· 1 - 3 years of experience in local Electrical/ACMV industry

· Strong interpersonal and communication skills

· Independent, target-oriented, and able to work in a fast-paced environment

· Effective interaction with project members and stakeholders

· Analytical skills for project investment approval

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

About the company

Our client is a leading global provider of advanced drilling and production equipment for the energy industry, specializing in subsea, offshore, and land-based applications. The company is known for its high-quality, reliable solutions designed to meet the demanding needs of the oil and gas sector.

About the job

• Develop and implement procedures for inspecting, testing, and assessing the accuracy and precision of products and production equipment.
• Design and evaluate inspection and testing processes, mechanisms, and equipment.
• Perform quality assurance testing and statistical analysis to evaluate control levels and manage product quality risks.
• Carry out root cause analysis for incidents requiring corrective actions.
• Ensure corrective actions and deviations comply with reliability standards, and confirm that all documentation meets the required compliance standards.

Qualifications and Requirements:

• Mandatory API Q1 and Q2 certifications.
• A minimum of 5 years of experience in a similar role.
• A Diploma in Mechanical Engineering or a related field.

Location: Tuas (Company transport provided)

To apply online please use the 'apply' function, and attach your updated resume.

(EA: 94C3609/R1442042)

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

Job Description & Requirements:

As a Frontend Engineer, you will be responsible for architecting and developing efficient, reusable, and visually appealing frontend systems for a trading application powered by AI models and LLMs. You'll work closely with cross-functional teams, including backend engineers, AI engineers, product managers, UI/UX designers, and the product design team to deliver a responsive, engaging user experience across web and mobile platforms. Your expertise will ensure a seamless blend of aesthetic and functionality.

Key Responsibilities:

• Architect, design, and develop efficient and reusable frontend systems (Web/Mobile)
• Collaborate with backend engineers, AI engineers, UI/UX designers, product managers, and other stakeholders to build comprehensive, architecturally sound, and visually appealing frontend solutions
• Optimize code to improve scalability, reliability, security, and performance of web and mobile applications
• Design interactive components, especially for chat-based and generative UI, to create dynamic LLM-powered user experiences
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Documentation of design and architecture.

Qualification & Skills:

• Minimum 6 years of professional experience as a Frontend Engineer
• Expert in HTML5 / CSS3 / ECMAScript 6 + / TypeScript. Strong preference for candidates experienced with Tailwind CSS
• Proficient in modern frontend frameworks, including React and Vue, and/or React Native for mobile
• Skilled in state management tools such as Redux, Pinia
• Experience with API design principles, RESTful API integration and familiar with React Query
• Strong understanding of client-side performance, optimization.
• Deep knowledge of scalability, reliability, and security considerations in modern web development.
• Familiarity with LLM application development and generative UI/interactive components, particularly for chat-based applications
• Excellent collaboration and communication skills to work effectively across teams

Quantitative Trading Engineer / Quantitative Researcher

Working day: Monday to Friday, 9am to 6.30pm

Working location: Raffles Place

Salary: Discuss during interview

Responsibilities

Strategy Development:

• Use AI technologies such as machine learning and deep learning to intelligently optimize investment strategies and improve the performance of strategies in actual transactions.
• Extract predictive signals from financial data through both traditional statistical analysis methods and cutting-edge machine learning techniques.
• Formulate and apply mathematical modeling techniques to enhance existing trading strategies and perform innovative new research with the goal of identifying and capturing trading opportunities.

Data Analysis：

• Collect and analyze large financial datasets (market data, news, social media, etc.).
• Work with large data sets to predict and test statistical market patterns, combining knowledge of systems, mathematical techniques, and trading to identify the best places to improve the trading system.
• Build and optimize feature engineering pipelines to improve model prediction accuracy.

Financial Modeling:

• Construct, back-test, maintain, and improve financial models to support trading activities.
• Conceptualize valuation strategies, develop, and continuously improve upon mathematical models and help translate algorithms into code
• Conduct research and statistical analysis to build and refine monetization systems for trading signals
• Optimize the order execution and risk management of our trading system
• Create robust solutions to problems presented in the trading environment
• Build regression, classification, reinforcement learning and other models for market forecasting and trading decisions.
• Tuning the model's hyperparameters to improve model performance and stability.

Strategy backtesting and real-time testing:

• Backtest historical data to evaluate the strategy's yield, volatility, drawdown and other indicators.
• Deploy the strategy to the real-time environment, track performance and continuously optimize.

Requirements

• Master’s degree or above in Statistics, Mathematics, Applied Mathematics, Computer Science, Financial Engineering or equivalent.
• At least 2 years of experience in quantitative trading and machine learning modeling.
• Proficient in programming languages ​​such as Python, C++, Java, etc.
• Familiar with common machine learning frameworks such as TensorFlow, PyTorch, Scikit-learn.
• Familiar with quantitative trading systems, data flows and algorithms.
• Deep understand the structure of financial markets and be familiar with markets such as virtual currencies, stocks, futures, and foreign exchange.
• Experience in large-scale data processing, proficient in using SQL, NoSQL, Hadoop and other tools.

Bonus Skills

• Experience in developing high-frequency trading strategies will be an advantage.
• Participated in AI competitions (such as Kaggle) or published papers in top conferences (such as NeurIPS, ICML) will be an advantage.
• Familiar with cutting-edge AI technologies such as reinforcement learning, and generative adversarial networks (GANs) will be an advantage.

• Identify customer needs and recommend product solutions.
• Responsible for the technical support for both presales and post sales.

Requirements:

• Degree in Electronics/Electrical Engineering
• At least 2 years of sales experience in artificial intelligence/physical security/CCTV or smart workspace solution.
• Knowledge of TCP/IP, Network Structure, Firewall, LAN and VLAN

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Instrumentation of measurement and detection equipment for military and homeland security.
• Oversee post-sales delivery of equipment, conduct scheduled maintenance, and conduct diagnostic analyses for troubleshooting and repair tasks.

Requirements:

• Higher Nitec in Electrical & Electronics Engineering or equivalent.
• At least 2 years of working experience

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Brief Description & Role

This position is responsible for testing, troubleshooting, and repairing RF components and systems. You will work closely with cross functional teams to ensure the quality and performance of RF equipment, ensuring that all devices meet the required specifications and standards.

Responsibilities

1. Work with business development, Engineering, system test and external customers to gather information and develop RF Test plans, specifications for product under test.
2. Perform RF testing using test equipment such as spectrum analyzer, noise figure meter, power meter, network analyzers, and signal generators.
3. Assembling/debugging the RF test system and device under test.
4. Hands on troubleshooting and repair of RF product till component level using RF and digital measurement tools & equipment.
5. Analyze test data and provide reports on yield.
6. Document test procedures, results, and any issues encountered during testing and debugging.
7. Assist in the development of new RF testing methodologies and best practices.
8. Do simple antenna parametric radiation measurement

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Provide presales support by solving technical business solutions for the client.
• Responsible for product demonstration, proposal writing, creating compliance table, training and product enablement.
• Develop working proficiency and obtain certifications on assigned products and technologies.
• Conduct hands-on POC independently and present vendor’s solution to partners and end-users.

Requirements:

• Diploma in Computer Studies or equivalent
• At least 2 years of presales experience in IT network and Cybersecurity domain.
• Good knowledge of security and networking infrastructure environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Marine Service Engineer

Responsibilities:

• Diagnose and repair marine engines, steering systems, and other components
• Perform routine maintenance and ensure shipboard systems are working correctly
• Provide detailed reports to customers and maintain accurate records
• Adhere to safety protocols and environmental regulations
• Collaborate with team members and assist in training junior technicians

Job Requirements:

• Diploma or equivalent; technical certification or associate degree in marine mechanics or related field preferred.
• Minimum of 2 years of experience in marine service and repair.
• Strong mechanical aptitude and problem-solving skills.
• Proficiency with diagnostic tools and marine service equipment.
• Knowledge of marine engines, aux engines and cargo pumps.
• Ability to read and interpret technical manuals and schematics.
• Physical ability to lift heavy objects and work in various weather conditions

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Proposal Engineer (M&E)

Job Description:

We are seeking an experienced Proposal Engineer to join our team. As a Proposal Engineer, you will play a crucial role in preparing, developing, and delivering comprehensive proposals for potential clients. You will work closely with cross-functional teams to gather technical information, analyze client needs, and create persuasive proposals that align with our business goals.

Responsibilities:

- Cost Estimation: Prepare detailed cost estimates for MEP projects, analyze project specifications and drawings, and determine scope of work and associated costs.

- Quantity Take-off: Perform quantity take-offs for materials and labor required for MEP installations and collaborate with project teams to ensure accurate assessments.

- Budgeting and Cost-control: Develop and manage project budgets, monitor cost variations, and provide recommendations for cost-saving measures.

- Tendering and Procurement: Assist in preparing tender documents, participate in procurement process, and evaluate subcontractor and supplier bids.

- Contract Administration: Administer and manage contracts related to MEP works, monitor contractual compliance, and resolve disputes.

- Value Engineering: Identify opportunities for value engineering, optimize project costs, and implement recommendations.

- Risk Management: Identify and assess potential risks, develop strategies to mitigate risks, and ensure project success.

- Cost Reporting: Generate regular cost reports, provide analysis and recommendations, and collaborate with project stakeholders.

Requirements:

- Degree / Diploma in Quantity Surveying / Engineering or equivalent from a recognized University.

- 3 to 4 years of related working experience in industrial, commercial, or data-center projects.

- Good working knowledge in Mechanical and Electrical.

- Organizational skill with attention to detail, adaptable and flexible.

- Ability to work well in a team, work independently, and demonstrate initiative and commitment.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Field Service Engineer

Responsibilities:

• Responsible for the installation, commissioning, repairing and maintenance job of Company’s products and components at customers’ sites.
• Maintain work quality by providing efficient service and technical support to customers.
• Liaise with customers and internal team relating to technical and service issues.
• Ensure proper documentation and maintenance of service reports and other records.
• Support sales to get service orders.
• Provide product training to customers.
• Ensure that health and safety standards are followed.
• Any other ad-hoc duties as assigned by Service Manager.

Requirements:

• Minimum diploma or above in Electrical/Electronics/Mechanical/Mechatronics Engineering.
• Relevant working experience with electrical/mechanical repair will be an advantage.
• Effective communication skill, analytical and judgemental skills required.
• Self-starter and ability to manage, develop and execute plans and objectives in a timely and effective manner.
• High level of integrity, discipline and self-motivated.
• Able to work independently and in teams.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Senior Design Electrical Engineer

Job Responsibilities:

• Lead technical assignments for electrical hardware product design and development.
• Design, fabricate, modify, and evaluate electromechanical devices, components, or systems.
• Develop initial concepts and participate in detailed product design.
• Create original hardware, circuits, components, software, processes, and models.
• Participate in design reviews, providing DFM and DFA inputs.
• Prepare and release engineering drawings/schematics and communicate with vendors.
• ECO release of engineering documentation.
• Design AC/DC power distribution systems, PCBA, and components.
• Develop, test, and document designs.
• Estimate product/project requirements (power consumption, weight, size, schedule).
• Coordinate with manufacturing during pilot/production runs.
• Interface with customers to understand technical requirements.
• Troubleshoot electrical issues, including on-site support.
• Collaborate with cross-functional teams (Purchasing, Marketing, Service, QA).
• Assist engineering management in developing schedules and specifications.

Requirements:

• Bachelor's Degree + 6 years' experience / Master's Degree + 3 years' experience in Electrical/Electronics/Mechatronics Engineering
• Working knowledge of electrical systems (motion, temperature measurement, PID loops, safety interlock circuits)
• Experience with dynamic electromechanical system design
• Proficient in Orcad, Autocad, PCAD, Solidworks, or similar 3D CAD software
• Design knowledge of NFPA, Semi Safety Requirements, and Machine safety

Interested candidates who wish to apply for the advertised position, please click on “Apply”.

We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

The candidate is expected to carry out the following job scope and assume the following responsibilities at Whitby Wood Mills:

Technical Leadership:

• Lead and manage multidisciplinary project teams, ensuring the timely and high-quality delivery of engineering design projects.
• Provide advanced engineering expertise in design, analysis, and innovative problem-solving for complex projects.

Computational Design & Coding:

• Develop and implement parametric models and algorithms using coding skills (e.g., Python, Grasshopper, Dynamo) to optimize and automate design processes.
• Ensure seamless software interoperability across platforms (e.g., Rhino, Revit, Tekla) for improved collaboration and project integration.

Finite Element Analysis (FEM):

• Perform and validate detailed Finite Element Analysis (FEA) to assess structural performance under various load cases using software like Abaqus.
• Use analysis results to drive technical decisions and improve design accuracy and safety.

Project Management & Planning:

• Develop and implement detailed project plans, including scope, timelines, resource allocation, and budgeting.
• Identify and manage project risks by developing effective mitigation strategies.
• Monitor project budgets, ensuring financial performance and delivery within budget constraints.

Client & Stakeholder Management:

• Serve as the primary point of contact for clients, maintaining strong relationships throughout the project lifecycle.
• Participate in business development activities, including proposal preparation, client acquisition, and presentations.

Technical Detailing & Documentation:

• Prepare and review detailed construction drawings, specifications, and calculations for submissions to relevant authorities (e.g., BCA, LTA) or for international projects.
• Ensure compliance with local, national, and international regulations and standards in all project designs and deliverables.

Design Review & Quality Assurance:

• Review and approve engineering designs, calculations, and technical specifications prepared by project teams.
• Ensure that all projects meet the firm’s quality standards and comply with client requirements and safety protocols.

Mentorship & Training:

• Mentor junior engineers and design staff, offering technical guidance and support for professional development.
• Develop and implement training programs to enhance the skills and knowledge of the engineering team, including computational tools and software interoperability.

Technology Integration & Process Improvement:

• Stay updated on the latest engineering technologies and tools, integrating them into project workflows where appropriate.
• Identify and implement process improvements to enhance project delivery, efficiency, and innovation.

Proposal Preparation & Market Analysis:

• Contribute technical expertise to proposals and bids, analyzing market trends and client needs to identify new opportunities for expanding the firm’s services.

Sustainability Practices:

• Promote and incorporate sustainable design practices, ensuring that projects meet environmental and client objectives.

PURPOSE:

We are looking for an enthusiastic Senior Full Stack Engineer who is passionate with crafting innovative solutions to provide customers new capabilities for improved business outcomes.

What does the role look like?

• Uses business and technical acumen to understand the customer’s business requirements and technical requirements
• Design and build high-quality Enterprise Content Management and AI-enabled Digital solutions using low-code platforms, Ai-Enabled or traditional software development tools.
• Produces code, algorithms, scripts and objects that are efficient, elegant, well structured, maintainable, and easy to understand.
• Design and build robust and reliable integrations between various platforms and components.
• Perform validation and verification to ensure work products meet the design specifications.
• Deploys the solution components for development, testing and production.
• Investigate and troubleshoot issues to find and address defects.
• Supports existing automations and processes, implementing change requirements as part of the change control process.
• Problem-solve issues that arise in day-to-day running of processes and provide timely responses and solutions as required.
• Work closely with the product teams to propose new required features or improvements.
• Supports pre-sales engagements with in-depth knowledge and experience.
• Keeps abreast of emerging solutions and technologies via professional publications, seminars, and symposiums.
• Maintains and grows a continuing trusted relationship with customers and technology partners.
• Mentors others with on-the-job training.

What are we looking for?

• Bachelor’s Degree in Computer Science, or equivalent
• 7 years of experience in information technology; covering design, development, and integration demonstrating the ability to articulate complex technical matters to non-technical individuals.
• 5 years of application development and configuration for business-critical applications; configuring, debugging, and systems integration including forms, reports, underlying logic, databases, and interface components as a developer.
• 2 years of software integration experience with applications, data, and infrastructure involving cloud platforms
• Solid practitioner knowledge on methods and tools for delivering application engagements.
• Quickly get up to speed on unfamiliar technologies and programming languages
• Translate business requirements into viable and scalable applications
• Design enterprise layered architecture applications
• Tackle complex technical challenges according to project needs
• Assess existing applications in performance, architecture, and development best practices
• Guarantee project quality in design-time by enforcing development best practices
• Apply deep and wide technical skills in architecture patterns, solutions design and application performance
• Develop applications, project manage successful delivery, provide excellent maintenance and support for these applications
• Multi-task, organize, and prioritize work
• Proficiency in some or all of these development, resources, languages or tools:HTML, CSS, UX and UI design, JavaScript, Relational Databases, .Net, VB, C# Sharp, ALM and APM practices and tools
  NodeJS, React, Docker, Github, PuTTY, Ubuntu, SQL/DB, CI/CD, AWS/Azure/GCP
  Enterprise Content Management Solutions
• Presales accomplishments with solutions involving applications, infrastructure, and integration.
• Excellent interpersonal skills and communication skills.
• Working Knowledge of AI and Enterprise Content Management

Only shortlisted candidates will receive a response. Therefore, if you do not receive a response within 14 days, please accept this as notification that you have not been shortlisted.

EA License No: 11C5502

Registration No: R23115318

Summary

Responsible for designing, developing, and maintaining automated systems to enhance production efficiency and accuracy. Strong analytical and problem-solving skills are essential.

Responsibilities

• Design, develop, and implement automated systems to improve production efficiency and accuracy.
• Work closely with cross-functional teams to identify automation opportunities in manufacturing and assembly processes.
• Program and maintain PLCs, robots, and other automated equipment.
• Develop user-friendly interfaces and dashboards for monitoring and controlling automated systems.
• Conduct troubleshooting, debugging, and performance tuning for automated equipment.
• Stay updated on advancements in automation technology to recommend and implement innovative solutions.

Requirements

• Recognized degree in Mechanical Engineering, Electrical Engineering, or Automation Engineering.
• At least 5 years of experience in industrial automation, including hands-on experience with PLCs, robotics, and sensors.
• Proficiency in programming languages such as Python, C++, or ladder logic for PLCs.
• Knowledge of Industry 4.0 principles and IoT integration.
• Strong analytical and problem-solving skills.

Maltem Singapore is seeking a User Experience (UX) Engineer for our Wealth Management Client.

Summary:

In this role, you will support the UX Engineering, Design, and Research for Cerebro Project.

Responsibilities :

• Set design requirements based on information from internal teams and user research.
• Identify new product improvement opportunities.
• Analyze how a new product satisfies business needs and user preferences.
• Modify and revise existing designs to meet changing customer preferences.
• Work closely with product engineers to suggest improvements for products and processes.
• Present product design ideas to cross-functional teams
• Help development teams create components by ensuring its built according to design and interaction specifications.
• Maintain the design system, create, and update documentation, and library components.
• Establish design standards and principles accompanying the design system for scalability, efficiency, and consistency.

Key Requirements :

• Degree in Information Technology or design field, or equivalent work experience.
• Proven experience in all phases of the design process including User Research, Copywriting, Wireframing, Prototyping, Visual design, Interaction design, and Usability testing.
• Proficiency and mastery of standard design tools (Figma, Sketch, Adobe CS and XD).
• Demonstrable experience in building design systems, component libraries, and/or UI Kits.
• An intuitive eye for customer needs beyond the obvious.
• Excellent attention to detail.
• Ability to collaborate with cross-functional team members.
• Ability to collect and interpret both qualitative and quantitative feedback.
• A well-rounded portfolio of client work, demonstrating a strong understanding of client objectives.
• Ability to effectively communicate and persuade around design concepts.
• Passion for design, not satisfied with the status quo and always thinking of ways to improve.
• Creative problem-solving skills.
• Dynamic, creative personality, effective at engaging and influencing a variety of audiences.
• Provide assistance to product engineers when needed.
• Recommend new tools and technologies by staying abreast of the latest trends and techniques.

Summary

Responsible for designing and implementing test hardware and software to validate product functionality, performance, and reliability. Strong problem-solving, organizational, and communication skills are crucial for success in this role.

Responsibilities

• Design, develop, and implement test hardware and software for validating product functionality, performance, and reliability.
• Create automated test systems and procedures to ensure consistent and repeatable test results.
• Develop, troubleshoot, and maintain test fixtures, equipment, and associated software for in-house and production testing.
• Collaborate with design and manufacturing teams to identify and address test-related issues.
• Analyze test data to identify trends, troubleshoot issues, and recommend improvements to product design or test processes.
• Document test plans, procedures, results, and maintenance requirements.
• Ensure test systems comply with industry standards and safety regulations.
• Continuously improve test processes and tools to reduce testing time and increase reliability.

Requirements

• Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field from a recognized institution.
• Minimum of 5 years of experience in developing test hardware and software, preferably for complex electromechanical systems.
• Strong proficiency in programming languages such as Python, LabVIEW, MATLAB, or C/C++.
• Knowledge of hardware design and schematic interpretation to develop custom test fixtures.
• Experience with data acquisition systems, signal processing, and instrumentation.
• Familiarity with communication protocols (e.g., I2C, SPI, UART, Ethernet) and interfaces (e.g., GPIB, USB).
• Ability to integrate sensors, actuators, and control systems into test setups.
• Experience in using software tools for simulation, debugging, and automation.
• Ability to analyze complex technical problems and develop innovative solutions.
• Strong troubleshooting skills for both hardware and software in testing environments.