Responsibilities:

• Perform feasibility study, concept design, front end engineering design (FEED) and detailed designs for concrete and steel structures in Energy and Industrial related facilities such as pile foundation, footings, pilecaps, pipe racks, sleepers, pipe bridge, equipment plinths, underground pipeline culvert, drainage, sewerage, road works
• Prepare related material take off (MTO) for cost estimates
• Prepare tender specifications, project requirement, carry out tender evaluation for projects
• Conduct project presentation to clients and stakeholders
• Project management for engineering works
• Perform authorities’ pre-consultation, submissions and liaison with authorities for necessary approvals and permits

Requirements:

• Degree in C&S Engineering, preferably from a university recognised by Singapore Professional Engineers’ Board (PEB), with strong competency in concrete, steel and foundation design.
• Able to perform concrete and steel structural analysis and design, and preferably also working knowledge in using application related to geotechnical design like Plaxis and Geoslope.
• Experience in marine facilities’ design would be an added advantage
• Minimum 5 years of relevant design experience in concrete, steel and foundation structures, drainage, sewerage and road works, preferably in a consultancy firm
• Candidate with more than 15 years of relevant design experience and/or a locally registered Professional Engineer will be considered for higher position
• Knowledge in Eurocodes, BS Codes. Knowledge in NFPA, API would be an added advantage
• Conversant with local authorities’ requirement, pre-consultations and submissions
• Experience in performing feasibility study, conceptual, FEED and detailed design, preferably, able to perform basic CAD drafting
• Possesses skill in project management, conducting presentation, effective communication and good report writing skills
• Good spoken and written English
• Fluency in spoken and written Chinese would be an advantage
• Able to travel for oversea projects at short notice

Job Responsibilities

• Responsible for developing all electrical, controls, instrumentation documents and specification for the project.
• To carry out electrical, controls and instrumentation related detailed design and preparation of drawings and datasheets
• To interpret and interface with other engineering discipline documents like P&ID, GA, client control and instrumentation systems
• To check and review all electrical, controls, instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors and OEM to resolve technical issue at site and in office.
• To interface with engineers of other disciplines within the engineering department.
• To prepare procurement support including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost estimates etc.
• To provide technical support to project team for on-going projects and resolve any technical issue on site.

Job Requirements

• Degree or Diploma in Controls, Electronics and Electrical Engineering.
• 3 years relevant experience required for Senior position
• Knowledge of SCADA, PLC and other instrumentation systems will be an advantageous
• Experience in design and drafting of LV and HV systems.
• Familiar with Electrical Installation works and international electrical codes and standards.
• Knowledge in MS, Autocad, Programming languages will be advantageous
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• Able to work independently in a flexible, dynamic and fast-paced environment.

Engineer/Assistant Engineer (Software Programmer)

-Knowledge in electrical schematics

-Knowledge in PLC Programmer, SCADA and HMI

-Experience with Omron, Keyence, Siemens and/or Allen Bradley

-C/C++ knowledge would be advanage

-Have interest in Programmer,creative in HMI Design

-Ability to Travel Overseas at short notice

Cyber Security Engineer (Shift)

Job Description:

• Perform remote standby during weekends, public holidays, and after office hours for Monday – Friday.
• Provide phone/email and on-site (if required) support, resolving, mitigation, troubleshooting and investigating issues pertaining to cybersecurity solutions the company has implemented for its clients.
• Log incidents (either via phone or email) into incident management system (ITSM).
• Track and handle all incidents within client’s SLA.
• Coordinate with stakeholders for service recovery and follow through all the necessary escalation to respective team(s).
• Follow up with client on pending tickets for closure.
• Provide daily handover report after each shift.
• Onsite training during office hours as part of onboarding process and occasional trainings to keep up to date with the product

Job Requirements:

• Professional certifications in Information Technology or related fields.
• Self-motivated, always keen to learn new technologies and able to work independently.
• Possess logical thinking process in solving technical problems.
• A well-natured team player with strong customer centric mindset.
• Good communication skills with clients and various stakeholders.
• Experience or knowledge in Microsoft Windows and Server, Microsoft SQL, Networking and Virtualisation is an added advantage.

Job Responsibilities:

• Install, maintain, and repair electrical systems and components.
• Conduct regular inspections of electrical systems to ensure compliance with safety regulations.
• Troubleshoot electrical issues, including diagnosing faults and repairing equipment in a timely manner.
• Assist with the design and layout of electrical systems for new projects or modifications.
• Interpret electrical blueprints, wiring diagrams, and technical specifications.
• Adhere to all safety and quality control standards.

Qualifications:

• Associate's degree or higher in Electrical Engineering, Electrical Technology, or a related field.
• Proficient in troubleshooting and repairing electrical systems and machinery.
• Strong knowledge of electrical codes and safety regulations.
• Familiarity with electrical testing equipment and tools.
• Ability to read and interpret technical drawings and schematics.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Roles & Responsibilities

* Project management, system testing, technical analysis, optimization of processes and working collaboratively with key stakeholders including technology partners
* Providing engineering design support; addressing technical and safety requirements for battery energy storage systems in accordance with industry standards, project and local regulatory requirements
* Preparing and reviewing technical documentation
* Performing analysis and diagnostics; proposing and implementing corrective actions for performance and reliability exceptions of battery energy storage systems
* Managing the day-to-day operations and maintenance of smart grid and battery energy storage systems to ensure optimal availability for market participation and grid ancillary services.

Requirements:

* Degree in Engineering, preferably in Electrical/Electronic Engineering
* Experienced working with, and deep understanding of Remote Terminal Unit, Power Conversion System, DC-to-DC Converter, illary liquid cooling system, different battery types and Battery Management System
* Keen to explore new technology and adaptable to related challenges
* Passionate about energy management and sustainability
* Good analytical and problem-solving skills
* Able to conceptualize new ideas and communicate effectively, with strong written capabilities

Key Responsibilities

Preparation and present DFM (Design for manufacturing)

Construct the Tool design assembly layout

Prepare and issue 2D detail insert & mould base drawing with appropriate tolerance for manufacturing

Tool design must be manufacturability and can estimate cycle time base on as design

Tool design concept able to run production efficiently with lowest cycle time

Tool design capable to run auto cycle

Assist in Customer Engineering Change

Continual improvement on the tool concept

Conduct tool design review to present his / her design concept

Endorse and release tooling drawing to tool room for mould manufacturing

Raise Purchase requisition for the tooling related direct and indirect purchase

Any other duties and responsibilities delegated by superior

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Assist the Project Manager with daily project activities, including coordination, scheduling, planning, and implementation of work.
• Conduct regular site inspections to ensure construction activities are carried out in compliance with approved designs, contract specifications, safety standards, and quality requirements.
• Provide recommendations for corrective actions when deviations from the project scope, schedule, or quality occur.
• Serve as the point of contact for clients, consultants, authorities, and internal teams, ensuring effective communication of project progress, specifications, and any challenges.
• Review project proposals and plans to align project objectives with management expectations, ensuring performance criteria and client needs are clearly understood and incorporated.
• Oversee project timelines and milestones, proposing adjustments and modifications to the schedule as needed to ensure timely delivery.
• Assist in the achievement of team goals by actively contributing to relevant tasks and maintaining a collaborative work environment.
• Liaise with clients to coordinate project plans, schedules, and deliverables, ensuring alignment with client expectations and project requirements.
• Prepare and submit all necessary documentation, including method statements, risk assessments, progress reports, monthly reports, and other key project documents.
• Prepare and submit monthly progress claims in a timely manner, ensuring accuracy and completeness.
• Perform other duties or tasks as assigned by immediate superior or Head of Department.

• Degree in Civil Engineering recognized by Singapore Professional Engineers Board (PEB)
• Minimum 3 year of experience in constructions or civil engineering
• Those with experience in underground utilities especially cable pipes will be advantageous
• Possess excellent interpersonal and communication skills
• Service-oriented client relationship and people
• Self-motivated and able to work independently
• Preferably possess a valid Class 3 license

• 6 days work week
• Preferably possess a valid Class 3 license

Other Benefits

• Enjoy a company-provided shuttle for easy transportation to and from the office, including lunch trips.
• Free access to medical teleconsultation services for your convenience.
• Portable Medical Benefits Scheme (PMBS). Enjoy an additional monthly contribution directly to your Medisave account.
• Comprehensive Medical Benefits. Includes coverage for dental care and health screening through the company's provider.

Why Join Us

• Dynamic Work Environment: Thrive in a fast-paced, ever-evolving workplace that offers new challenges and opportunities every day.
• Varied Responsibilities: Take on diverse and exciting tasks that keep your role engaging and fresh.
• Collaborative Team Culture: Join a team that values open communication, efficiency, and a strong commitment to security.
• Growth and Development: Benefit from a supportive environment with ample opportunities for professional growth, skill development, and career advancement.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

• Lead the protocol generation and review for the assigned areas (i.e. process equipment, facilities, utilities and laboratory equipment)
• Review vendor or construction turnover document
• Review construction walkdowns to assure compliance with design
• Lead or direct execution of full C&Q project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with a cross functional team
• Manage summary report writing wherever required
• Verification of Construction Contractor’s Document deliverables (CTODs) and Vendor Document deliverables (VTODs)
• Support the review and revision of design document, wherever required
• Liaise with identified stake holders, including suppliers/contractors
• Provide SME input wherever required
• Manage the assigned system handover
• Support the management of project schedule
• Compliant to quality and safety requirements
• Complete trainings in a timely manner
• Support company operation and business as required
• Any other project responsibilities specified in the individual OAN and organizational responsibilities assigned by management

Requirements:

• Minimally a Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 7 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices
• Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail
• Proficient presentation and facilitation skill is a plus

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Job Title: QA/QC Engineer

Salary Range: S$3,400 – S$4800

Report to: QA/QC Manager

Min Qualifications / Experience :

1) Degree in Mechanical Engineering holder with 2-4 relevant experience

Job Skills Required:

1) Knowledge in Microsoft office applications such as Excel, Word, Power Point and

related spreadsheet software.

2) Must be able to work well with others in a team setting.

3) Ability to work independently.

4) Must be able to effectively handle many concurrent projects.

5) AWS, ASME AS, PD5500.

Duties & Responsibilities

a. Assist QA/QC Manager in the managing the QA/QC department.

b. Establish, implement and maintain the QC system for products that need to comply with ASME codes.

c. Prepare, control and maintain the QC Manual in accordance with ASME code.

d. Initiate quality programs and report to QA/QC Manager for the current product quality level.

e. Develop Inspection Test Plan (ITP), inspection and testing procedures.

f. Supervise and guide the team of QC inspectors and administrative assistant.

g. Control the usage of ASME stamps and review ASME’s MDR forms.

h. Maintain and control the welding procedures (WPS) and welder performance qualification records.

i. Any Adhoc assignment given by QA/QC Manager.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope and Responsibilities:

• Coordinate equipment and process validation execution, data collection and summaries.
• Perform documentation and release technical requirements/ drawings, write, review or update work instructions for engineering and consumables production lines.
• Assist in MES ticket and process verification/ validation activities.
• Assist Process Engineers in providing direct support to troubleshooting, sustaining and continuous improvement for consumables production lines related to new product development, yield, quality and throughput.
• Recommend and assist in implementation of improvements in a production environment to meet goals across multiple operations and technologies.
• Assist with design and execution of controlled experiments to optimize processes; document and analyze process test results.
• Support with Engineering/ R&D teams to develop processes for new products and improve processes of existing products.
• Supports nonconforming material analysis and investigations.

Qualifications:

• Possess good understanding of manufacturing process and regulated biotech or medical devices manufacturing environment.
• Capable of executing test plans for components, materials, systems and processes.
• Competent in Microsoft word, excel, powerpoint
• Knowledge in product & process feasibility study, line validation, qualification and optimization to production
• Excellent team player, interpersonal and communication skill.
• Well-developed documentation and technical report writing skills
• Able to work well under stress, both internally and across functions and perform multitasking.
• Proactive, innovative and self-motivating.
• Team player with strong focus on safety, quality and timeline.
• Diploma/ Bachelor in Engineering, Sciences or related field
• Experience in manufacturing/ FDA-regulated environment is a plus.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Project Design & Engineering Calculations and Proposal drawings to Client.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as Equipment sample or Site measurement studies

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Schedule the project in logical steps and budget time required to meet deadlines.

Site & office project management and daily operations including Engineering Design, Drawing and Fabrication, inspections, site measurements and handover to client’s.

Attend Site meeting, Equipment rectification in assembly and dismantling when required.

Overall project planning, scheduling, monitoring, and updating to meet project completion targets.

Liaison and meeting with client's representatives, relevant authorities, and consultants.

Site co-ordination, monitoring and report work progress.

Flair in design; able to sketch fast and produce good design concept

Coordinate all new and current on-going projects and able to communicate well with all levels

Review M&E Design Drawings and ensure compliance with design specifications and guidelines. Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Review incoming engineering, ISO piping drawings and assess impact of extra work or changes on schedule.

Ensure all regulatory and statutory requirements regarding testing and record keeping are met.

Supervise and coordinate M&E and Mechanical piping/equipment installation in accordance with approved drawings and materials. Coordinate M&E details with Clients, Consultants, Sub-contractors and other site staffs.

Monitor performance of multi-skilled craft workers in the installation, removal, or adjustment of equipment or components in accordance with established project procedures, requirements and specifications.

Monitor construction schedules, methods, manning charts, materials and equipment requirements.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Supervise electrical and instrumentation construction work as per IFC drawings.

Monitor construction schedules, methods, manning charts, material and equipment requirements.

Monitor the activities of contractors and subcontractors performing craftwork, ensuring compliance with project quality, safety, and security requirements.

Min 5-7 years’ of experience in Engineering related activities in Mfg, Recycle, Oil & Gas and Chemical plant industry.

Responsible for safety of supervised personnel; ensures that craft personnel comply with established safety policies and procedures, and that they practice safe work habits.

Applicable only for Singaporeans / PR's

Job Requirements

1) To Work as lead Engineer for Oil & Gas Project

2) Leading a Team of Electrical Engineers in Preparation & Review of Load lists, Single Line diagram of PCC, PMCC, MCC, DB's, Equipment Sizing Calculation, System Study through ETAP (Version 19.1) and Preparation & Review of Layouts like Hazardous Area classification, Lighting Layout, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.

3) Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies

4) Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/ approvals/resolution of open issues

5) Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team

6) Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.

7) Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works.

8) Preparation and Compliance for Engineering Audit Requirements.

9) Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.

10) Technical assistance to construction activities and attending to Site Queries.

11)Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.

12) FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

13) Coordination with PMC / QP and Construction Coordination.

14) Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works

15) Inspecting various equipment like LV & MV Bus duct, LV & MV Switchgear, Cables, Transformer, AC / DC UPS

16) Field Engineering Support Activities to complete the task in accordance with the project schedule.

17) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

18) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelors’ Degree in Electrical Engineering

Experience

Preferably Minimum 15 years of experience

Software Requirements

ETAP, DIALUX, Auto cad, MS Excel, MS Word

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. ITE in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal and communication skills

· Initiative and results driven

· Entry level candidate are welcome

Job Description

• To drive maintenance activities to maintain high efficiency of the equipment and minimise machine downtime as per KPI.
• To lead troubleshooting and root cause analysis of machine delays especially on mechanical faults.
• To develop and implement maintenance plans on all equipment to minimise downtime.
• To monitor cost as per KPI, maintain inventory of spares, liase with vendors and partners and to coordinate activities with other departments to ensure efficient operation.
• To develop, plan and implement automation projects to improve machine safety, reduce human intervention and maximise productivity.

Job Requirements

• Bachelor Degree in Mechanical / Electrical Engineering or equivalent studies
• Minimum 2 years in the maintenance field
• Experienced in automation, mechanical & electrical maintenance in a manufactoring environment
• Safety conscious
• Able to work in a hot and dusty environment