Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

Element has an opportunity for an Technical Engineer to join our rapidly expanding team. In this role, you will manage the technical implementation of the Element quality management systems within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Training Program Development: (a) Design and implement standardised training programs for laboratory staff across all required locations, covering equipment operation, test procedures, and safety protocols. (b) Develop training materials, including manuals, presentations, and hands-on demonstrations.
2. Staff Competency Assessment: (a) Assess staff competency regularly through practical evaluations, written tests, and observation of lab practices. (b) Identify skill gaps and recommend tailored training sessions to address deficiencies.
3. Standardisation Across Locations: (a) Ensure consistent training and skill levels across all laboratories by implementing standardised processes and protocols. (b) Conduct audits to verify adherence to training standards and laboratory procedures.
4. Onboarding and Certification: (a) Train and certify new employees in laboratory operations, testing standards, and quality requirements. (b) Maintain records of staff certifications and ensure timely renewals.
5. Technical Support and Guidance: (a) Act as a resource for troubleshooting technical issues during testing procedures. (b) Provide ongoing support to ensure proper equipment usage and methodology adherence.
6. Regulatory Compliance: (a) Ensure all training programs comply with relevant industry standards (e.g., ISO/IEC 17025) and regulatory requirements. (b) Stay updated on changes in industry regulations and incorporate them into training content.
7. Multi-location Coordination: (a) Schedule and conduct training sessions at multiple sites, ensuring all teams receive consistent updates and refreshers. (b) Coordinate with laboratory managers to align training priorities with operational needs.
8. Training Evaluation and Feedback: (a) Evaluate the effectiveness of training programs through feedback, performance reviews, and testing outcomes. (b) Continuously improve training content and delivery methods based on feedback and evolving laboratory practices.
9. Documentation and Reporting: (a) Maintain comprehensive records of training activities, participant progress, and competency assessments. (b) Report training outcomes and compliance metrics to management regularly.
10. Cross-functional Collaboration: (a) Work closely with the Quality team and Operations teams to ensure training aligns with organisational goals. (b) Share knowledge of best practices across sites to drive continuous improvement.
11. Promoting Safety and Quality Culture: (a) Train staff on workplace safety practices, hazard identification, and emergency response procedures. (b) Reinforce the importance of quality control and accurate testing in daily operations.
12. Equipment and Technology Training: (a) Provide training on the use, calibration, and maintenance of laboratory equipment. (b) Introduce staff to new technologies or testing methods as they are adopted.
13. Benchmarking and Continuous Improvement: (a) Monitor industry trends and benchmarks to incorporate innovative practices into training programs. (b) Encourage staff participation in external workshops, certifications, and seminars to enhance their expertise.
14. Performance Metrics Development: (a) Define key performance indicators (KPIs) to measure the impact of training programs on laboratory efficiency, accuracy, and compliance.

Job Requirements:

• Preferred Civil Engineering Diploma or Bachelor of Civil Engineering Bachelor’s degree (or equivalent qualification) with ideally 5 years’ experience in construction materials testing.
• Experience of working in an ISO / IEC 17025 environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Excellent communication skills.
• Experience in participating in quality investigations, undertaking root cause analysis, developing corrective action plans, and ensuring the effectiveness of actions undertaken
• Requirement to keep up to date with changes in the quality landscape and maintain personal professional development.
• Ability to identify quality and technical problems and work with colleagues to determine effective and sustainable solutions.
• Ability to collaborate with colleagues and work effectively as part of a team

A PROCESS AUTOMATION ENGINEERING COMPANY IS LOOKING FOR AN AUTOMATION ENGINEER

REQUIREMENT:

- DIPLOMA / DEGREE IN ELECTRICAL POWER AND CONTROL

- A GOOD KNOWLEDGE AND EXPERIENCE IN PLC PROGRAMMING AND TROUBLESHOOTING

- MIN 5 YEARS OF WORKING EXPERIENCE

JOB DESCRIPTION

- PLC DESIGN / PROGRAMMING

- TROUBLESHOOTING

- TESTING, COMMISSIONING OF EQUIPMENT / MACHINERY FOR FOOD & BEVERAGE, CHEMICAL INDUSTRIES ...

Overall Job Objectives

Assists the PM to oversee the construction activities, progress, planning, implementing, and monitoring of work schedules in accordance with the master and detailed work programme

Core Responsibilities

1. Attend site meetings and inspection

2. Preparation of documentation including project status report, method of statement and work procedure for the project.

3. Planning, executing, monitoring and control of the project.

4. Liaising and coordinating with all parties such as clients, consultants, consultants’ representatives, site supervisors, and sub-contractors

5. Handing of technical and engineering problems

6. Supervise ongoing site activities closely

7. Ensuring that the quality control of the project is met

8. Ensure that all the construction safety rules and regulations are being observed

9. Prepare necessary work and safety permits, submission documents and drawings once work are completed.

10. Any other ad-hoc tasks assigned

Job Specifications

1. Degree in Engineering or related disciplines

2. Able to read/understand/execute work based on construction drawings

3. Good communication, interpersonal and collaboration skills

4. Minimum 3 years of relevant experience.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

Element has an opportunity for a Sales Engineer. In this role you will be an inside seller, responsible for establishing and maintaining strong relationships with a defined group of Element clients and prospects.

You will expand business with dormant and existing accounts, provide increased touch points for accounts, and is budget responsible for 200+ growth and retention clients. It will be your responsibility to assure customer satisfaction through all stages of the sales process. In addition to client relations, this role will interact with the broader Element Sales Team, General Manager, and lab/technical personnel. The ideal candidate will be action oriented, customer focused and have an entrepreneurial drive.

Job Duties:

• Establish and proactively maintain a strong professional relationship with key decision makers and influencers within assigned accounts
• Identify current and future customer service requirements by establishing personal rapport with potential and actual customers, acting as a liaison between the customers and Element
• Identify opportunities early in the sales cycle to ensure maximum share of wallet for Element
• Qualify opportunities with assistance of inbound team / specialists
• Manage relationships and utilize technical support to assist in Sales
• Follow up in a timely manner on quotations for the assigned customer base
• Actively utilize CRM to record activities, ensuring contact details are accurate, duplicates are removed, new information is added and accurate call / visit logs are entered
• Actively participate in regular pipeline reviews, ensuring all CRM records are up to date and critical success factors are identified for key opportunities
• Achieve sales goals by converting and penetrating accounts
• Build and maintain a working knowledge of Element’s service offerings; participate in training/coaching opportunities
• Ensure compliance with all Element policies including but not limited to terms and conditions, trade compliance, treatment of others, moral code of conduct, and employee handbook
• Ensure adherence to all applicable laws pertaining to safety, environment and corporate governance

Job Requirements:

• Approximately 3 years of Business Development, Sales or Account Management experience
• Ability to read and interpret documents such as customer quotes / contracts, marketing materials, and customer testing specifications
• Ability to write routine reports and correspondence and speak effectively before groups of customers or employees of organization
• Ability to calculate figures and amounts such as discounts, interest, commissions and proportions and apply concepts of basic algebra and geometry
• Ability to solve practical customer problems and interpret a variety of instructions, data and details furnished in written, oral, diagram, or schedule form
• A valid driver’s licence, with an acceptable driving record under Element’s policy
• Experience in interpreting testing procedures and requirements desired
• Proficiency in Microsoft Applications (Word, Excel)
• Availability, flexibility, and maturity to represent the company at a broad range of events / projects in the community, with customers and within the company
• Ability to remain calm when faced with mounting pressure related to deadlines and multiple priorities
• Well-developed oral and written communication skills to meet a variety of communication needs
• Good interpersonal skills that foster open upward and downward communication built on mutual respect
• Ability to interface with clients, win new work and determine their requirements; helps develops proposals including cost estimates, work plan and terms and conditions
• Some overnight travel may be required

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Responsibilites

• Assist the Project Manager in producing, analysing and accepting design and technical details
• Assist the Project Manager in developing, managing and overseeing a safety management system for projects across the organisation
• Provide Engineering support to project, production and yard staff as directed by Project Manager.
• Provide technical expertise during design activities and reviews.
• Produce technical documentation as required to support daily operations and tendering activities
• Coordinate stakeholder activities during construction phases of projects not limited to clients, suppliers and contractors
• Create and maintain a culture of continuing improvement in safety performance and awareness across teams & work areas
• Execute Project Plan assigned by Project Manager.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Have the ability to oversee standard and/or routine technical problem solving activities and interact with customers on technical issues and questions
• Assist in the professional development of novice technicians and engineers within the local laboratory and works on well delineated technical issues including standard and routine analysis
• Carry out crucial examination and implementation of testing concepts and data and able to utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Has a clearly demonstrated ability to apply an array of testing techniques in a rational and practical style to help examine issues and build solutions.

Job Requirements:

• Possess a minimum Bachelor Degree of Science or Engineering major and 2 years of relevant working experience in a testing related field
• Possess a high level of expertise related to scope, core theories, concepts, terminologies and boundaries of chosen engineering discipline
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business
• In-depth understanding of testing concepts and compiles testing data from the tests performed

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Degree/Diploma in Electrical Engineering or related fields

Must have minimum Two (5) year work experience in the servicing, maintenance and troubleshooting on the Sewage water network, pumping station and reclamation plant with ancillary system.

Responsibilities

· Manage & Lead engineering team

· Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations to as part of the engineering project team

· Team development

· QA/QC documentation review of engineering deliverables

· Liaison with clients, project managers, architects, contractors

· Resolve any technical problems faced during project design and/or construction stages

· Any other required duties as required by the Project Team.

· Candidate who has knowledge in the application of Bentley BIM models and project scheduling software Primavera P6 will be added as an advantage.

As a mechanical engineer, your responsibilities can vary based on the industry and specific role, but they generally include:

1. Design and Development:Create and refine mechanical systems and components using CAD (Computer-Aided Design) software.
   Develop prototypes and test designs to ensure they meet required specifications and performance standards.
   Use engineering principles to solve design problems and improve product functionality.
   
2. Analysis and Testing:Perform simulations and analyses to predict how components will behave under various conditions (e.g., stress, temperature, and load).
   Conduct tests and experiments to validate design concepts and performance.
   
3. Project Management:Plan, coordinate, and oversee engineering projects from conception through completion.
   Manage project timelines, budgets, and resources.
   Collaborate with other engineers, stakeholders, and clients to ensure project objectives are met.
   
4. Manufacturing and Production:Develop and oversee manufacturing processes and procedures.
   Ensure that products are produced efficiently and meet quality standards.
   Work with suppliers and manufacturers to source materials and components.
   
5. Maintenance and Troubleshooting:Monitor and maintain mechanical systems and equipment.
   Diagnose and resolve mechanical issues or failures.
   Implement improvements to enhance reliability and performance.
   
6. Compliance and Documentation:Ensure designs and processes comply with industry standards, regulations, and safety guidelines.
   Prepare detailed documentation, including design specifications, reports, and user manuals.
   
7. Research and Innovation:Stay updated with advancements in mechanical engineering and incorporate new technologies into designs.
   Conduct research to explore new materials, techniques, and systems.
   
8. Collaboration and Communication:Work with cross-functional teams, including electrical engineers, software engineers, and project managers.
   Communicate technical information clearly to non-engineering stakeholders.
   

These responsibilities can vary significantly depending on the specific sector, such as aerospace, automotive, manufacturing, or energy.

Assist Project Manager on project functions included but not limited to project management, risk control management etc.

Prepare, plan, and submit project related documents such as method statements, risk assessments, test reports etc.

Coordinate, attend and supervise a team in daily transmission cable testing and commissioning work.

Ensure works are carried out safely, timely and within specifications.

Ensure quality of work is achieved, complying with best industry practices, and following workplace health and safety requirements.

Coordinate and liaise with main contractor, subcontractors, and site supervisors regarding on-site requirements and progress.

Site management, conduct site surveys and resolve problems on site.

Any other duties that may be assigned.

Requirements

Degree in Electrical Engineering recognised by Professional Engineers Board Singapore. Entry level welcome to apply.

Passion in Electrical Engineering and eager to start their career in the industry.

Good oral and written communication skills.

A team player with a positive working attitude and the ability to handle tight deadlines.

Proactive and flexible, able to work on site.

• Class 3 driving licence.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• 5 days, Tuas, Transport provided
• $4500 - $5500 basic salary, AWS, performance bonus
• Allowances, career growth
• Good learning environment

Main Purpose of Role:

Responsible for the installation, commissioning, testing, and servicing of equipment throughout its lifecycle. Ensure the delivery of high-quality, fit-for-purpose equipment and services while meeting client expectations.

Responsibilities:

• Diagnose problems or malfunctions in equipment, assess service requests, and perform technical interventions such as repairs, maintenance, or replacements.
• Carry out commissioning and testing of installations or components in line with project requirements, protocols, and safety regulations.
• Ensure seamless field service operations by handling technical, logistical, and administrative tasks. This includes documentation management, planning, and communication.
• Perform disassembly and assembly of equipment, including physically intensive tasks. Engage in machining activities such as drilling, sawing, or welding.
• Adhere to health and safety standards while ensuring project timelines and goals are met.

Requirements:

• Possess a Degree in Engineering
• Minimum 2-3 years of relevant experience as Service Engineer, preferably in cranes or wire ropes)
• Prior experience in equipment servicing or manufacturing is an advantage
• Client-oriented mindset, Strong planning and organizational skills
• Progress monitoring and follow-through
• Adaptability in dynamic environments
• Effective problem analysis and resolution
• Self-motivated, team player, and able to work independently
• The role involves physically demanding tasks and may require travelling to client sites

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Responsibilities:

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control

· Develop & review electrical related drawings, e.g. Single Line Diagram, MCC Schematic, Equipment layout, Cable ladder/tray routing layout

· Knowledge in Onshore/ Offshore standards (IEC, NEMA, IEEE & API)

· Prepare Electrical Load Analysis & List

· Familiar with Short-Circuit and Voltage Drop calculation

· Prepare & review Electrical MTO for projects

· Review Electrical equipment’s datasheet

· Strong knowledge in Low voltage MCC/Switchgear, UPS, VSD/VFD & Transformers

· Prepare specification for LV Switchgear, MCC, Transformers & VSD/VFD’s

• Reviewing of customers' specifications and drawings
• Define specifications and scope of work to contractors
• Execution of projects.
• Startup, testing, commissioning and troubleshooting of plants.
• Develop engineering capabilities and work with sales team on project proposal and bidding

Requirements:

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Able to communicate effectively in English at all levels, both verbally and in written reports

An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate. We regret only shortlisted candidate will be notified.

Job Responsibilities

• Create firmware specifications based on design rules, internal processes, and product/system requirements.
• Design and develop embedded firmware in accordance with established design rules, processes, and specific customer/product requirements.
• Development and implementation of signal processing algorithms in embedded firmware, with cross functionality team.
• Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.
• Support production implementation in the embedded software perspective
• Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.
• Liaising with Headquarter on the technical support and technology transfer.
  Verify regulatory compliance with support from head office.

Job Requirements

• Master / Bachelor in Electronic / Computer Engineering or equivalent
• Minimum 3 years relevant experience in embedded software design and development
• Strong knowledge and direct experience with C & C++ programming languages
• Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.
• Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.
• Knowledge on Python & Matlab

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

· Manage and grow customer base on the assigned product range.

· Prospecting sales visits and regular follow-ups to customer relationship

· Offer commercial and technical proposals or quotations according to technical specifications and customer requirements

· Tender preparation, sales presentations, conversion of prospects to customers and after-sales service

· Gather regional market and competitor information (technical, prices and product development), ensure meeting pre-determined targets.

· Formulation and execution of market growth strategies for tasked Segment and territories

· Collaborate and work with other department/ regional offices to maximise growth and orders

· Prepare and deliver technical presentations and demonstrations to clients

· Collaborate with the engineering and product development teams to understand product specifications and capabilities.

· Oversee and coordinate the installation and implementation of products and systems.

· Ensure projects are completed on time, within scope, and within budget.

· Prepare and present sales proposals, contracts, and agreements.

· Track and report on sales performance and progress against targets.

· Maintain accurate records of customer interactions and transactions.

· Provide post-sales support to ensure customer satisfaction and repeat business.

· Address customer inquiries and resolve issues in a timely and effective manner.

· Gather customer feedback and work with internal teams to improve products and services.

· Traveling within the designated region to meet clients and manage projects as require.

· Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Requirements:

· Diploma in Marine/Mechanical/Electrical/electronic/Engine

· Possess good sales and customer service knowledge

· 7-10 years of sales experience in marine diesel engine or marine equipment related experience.

· Self- motivated, independent and sales driven to develop and increase revenue

· Strong learning curves in upgrading technical knowledge

. Excellent presentation and negotiation skills

· Regional travelling is required

· Good oral and written communication skills in English and Chinese

. ⁠Other assigned duties

For more information, please reach us at [email protected]

*Only shortlisted candidates would be notified*

1. Responsible for all phases of planning and execution of project or may be responsible for a segment of a larger project
2. Has responsibility for day to day coordination activities with the engineering team ensures successful communication of project issues and resolution
3. B.S. or equivalent Degree in Engineering from an accredited university with relevant experience in oil/gas industry offshore projects
4. Have the experience in supporting Project Engineering Manager in planning, organizing, coordinating, and controlling project in accordance with the established policies, procedures, systems, and requirements
5. Requires demonstrated ability in supporting engineering effort for major projects in major oil and gas companies in-house or as part of Engineering Contractor’s team
6. Possesses knowledge of the respective industry.

• 5 days, Tuas, Transport provided
• $4500 - $5500 basic salary, AWS, performance bonus
• Allowances, career growth
• Good learning environment

Main Purpose of Role:

Responsible for the installation, commissioning, testing, and servicing of equipment throughout its lifecycle. Ensure the delivery of high-quality, fit-for-purpose equipment and services while meeting client expectations.

Responsibilities:

• Diagnose problems or malfunctions in equipment, assess service requests, and perform technical interventions such as repairs, maintenance, or replacements.
• Carry out commissioning and testing of installations or components in line with project requirements, protocols, and safety regulations.
• Ensure seamless field service operations by handling technical, logistical, and administrative tasks. This includes documentation management, planning, and communication.
• Perform disassembly and assembly of equipment, including physically intensive tasks. Engage in machining activities such as drilling, sawing, or welding.
• Adhere to health and safety standards while ensuring project timelines and goals are met.

Requirements:

• Possess a Degree in Engineering
• Minimum 2-3 years of relevant experience as Service Engineer, preferably in cranes or wire ropes)
• Prior experience in equipment servicing or manufacturing is an advantage
• Client-oriented mindset, Strong planning and organizational skills
• Progress monitoring and follow-through
• Adaptability in dynamic environments
• Effective problem analysis and resolution
• Self-motivated, team player, and able to work independently
• The role involves physically demanding tasks and may require travelling to client sites

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Descriptions:

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints.
• Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues.
• Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives.
• Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements:

• Diploma/Degree in Mechanical Engineering/relevant field
• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus.
• Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Purpose and Scope

You will provide mechanical maintenance works to support the operations of the Energy from Waste plant.

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualification, Skills and Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry
• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.