Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Requirements

• Candidate must possess at least Professional Certificate in Engineering (Environmental/Health/Safety) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Non-Executive specialized in Engineering - Environmental/Health/Safety or equivalent.

Responsibilities

The role of an Environmental Control Officer (ECO) is basically to look out for conditions/ situations in construction sites which cause environmental health problems or are likely to cause environmental health problems. He should report these conditions/ situations to the contractor together with recommendations on remedial measures to be taken to prevent recurrence.

The main areas where the ECO should pay attention to are as follows:

• Disease-bearing insects and rodents
• Proper disposal of construction waste
• Noise, air and dust pollution
• Earth littering
• Siltation of drains
• Food hygiene in canteens
• Any other environmental health matters

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Nitec in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Account Assistant

• Location: Senoko, Woodlands
• Salary: $2,500 - $2800
• Working days: Monday - Friday (7.30am -5pm / 8am-5.30pm / 8.30am-6pm)

Job responsibilities

• Main Function - Accounts receivable, including Credit Control, process documents received from customers, monthly accrual Journals, manage a small set of Malaysia’s accounts
  Process and prepare accounting source documents such as cheque payment, payment vouchers, manage stationeries etc
  Filing and custody of accounting documents assigned
  To follow up with Customers on payment issues
  To support in preparation of weekly, monthly accounting reports needed for audit or management reporting
  Ad hoc analysis, project work and duties assigned
  

Job Requirements

• With at least 1 year of relevant working experience
• Proficient with MS Office (Excel, Words, Outlook)
• Candidate with knowledge of Microsoft Navision Accounting system will have competitive advantage

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Location: Raffles Place

• Working hours: 09:00 to 17:30 (Monday to Friday)

Compliance Executive (Internal Control, Corporate Governance)

The role is expected to support Compliance Deputy General Manager on compliance and internal control matters.

Job responsibilities:

• Manage and maintain compliance policies and procedures, including group procurement policies (including vendor due diligence, human rights management and supplier chain management)
• Design and monitor internal compliance controls to prevent violations of legal rules and internal policies, including undertaking regular reviews and providing practical improvement advice
• Develop and roll out compliance and internal control governance training and promote compliance communications awareness to employees
• Support colleagues in internal control advisory matters and promote internal control awareness
• Conduct research on the latest compliance risk trends and provide consultation to colleagues on ethical or compliance issues
• Maintain Compliance Department website for employees to reference when they have questions
• Collaborate with cross-functional teams to ensure compliance requirements are fulfilled in business processes and systems
• And any other tasks which is required by Deputy General Manager

Job requirements:

• Bachelor’s degree in accounting/finance, business administration or equivalent
• 2 - 3 years of relevant work experience in risk, compliance & internal control fields
• Experience gained through working in a multi-national organisation involved in Asia-pacific work is advantageous
• Responsible and detail-oriented, excellent communication skills and interpersonal abilities are required
• Good team player and is able to handle multi-tasks independently
• Willing to travel to countries in Southeast Asia and Australia at least once every half year

Interested applicants, please send your resume to Charlene (R22105303) at [email protected] with the email subject header "Compliance Executive".

We regret that only shortlisted candidates will be notified. Other applications will be updated in our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Please find our Privacy Policy Agreement in the below link.

http://www.pasona.com.sg/privacy.html

Thank you for your kind understanding and co-operation.

Pasona Singapore Pte Ltd

EA License No:90C4069

(Lau Rui Lin, Charlene, EA Registration No: R22105303)

Working Location:Tai Seng
Working Hours: 8am - 6pm
Working Days:5days
Salary Range:$7,000 – $8,500

The Manager (Inventory) responsible in managing the inventory control to ensure inventory level is optimized and inventory targets are achieved.

KEY ROLE(S), RESPONSIBILITIES AND DUTIES

• Oversee inventory management; maximize stock turn through replenishment and stock transfer, as well as ensure inventory levels of product categories are controlled within the stock turn day given.
• Locate and reconcile any inventory discrepancies.
• Responsible to ensure overall cost effective and efficient methods of stock movement.
• Execute overall management direction to ensure product orders are sufficient and on time to cater for business activities.
• Constantly review and improve inventory control protocols and processes to ensure proper system is in place to support the work and to ensure adherence to supply chain inventory standards.
• Perform any other duties as assigned by Superior.
  
  QUALIFICATIONS, SKILLS, KNOWLEDGE AND ABILITIES
  EDUCATION AND EXPERIENCE
• Bachelor’s degree or equivalent.
• Proven track record with at least 8 years’ experience in retail supply chain management.
• At least 3 years of management experience in retail chain stores.
• Experience in WMS ERP system.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Position:Security Officers

• Able to commit 4 days work 1 day off, 3 days work 1 day off schedule.
• 12 hours permanent shift
• Location: islandwide
• Salary Package: $2,650 to $3,500 (Depends on experience)

Job Description:

• Incident Response, Manage Security & Safety Systems
• Prevent unauthorised entry into the premises
• Monitor CCTV
• Patrolling and clocking
• Access control duties

Requirements:

• Secondary education

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Whether you’re at the start of your career or looking to discover your next adventure, your story begins here. At Citi, you’ll have the opportunity to expand your skills and make a difference at one of the world’s most global banks. We’re fully committed to supporting your growth and development from the start with
extensive on-the-job training and exposure to senior leaders, as well as more traditional learning. You’ll also have the chance to give back and make a positive impact where we live and work through volunteerism.

Shape your Career with Citi
Citibank serves as a trusted advisor to our retail, mortgage, small business and wealth management clients at every stage of their financial journey. Through Citi's Access Account, Basic Banking, Citi Priority, Citigold and Citigold Private Client, we offer an array of products, services, and digital capabilities to clients
across the full spectrum of consumer banking needs worldwide.

We’re currently looking for a high caliber professional to join our team as Assistant Vice President, Business Risk and Control Manager based in Singapore. Being part of our team means that we’ll provide you with the resources to meet your unique needs, empower you to make healthy decision and manage your financial well-being to help plan for your future. The Citi Wealth business delivers a comprehensive wealth solution to clients across the wealth continuum, with integrated advice and execution, as well as traditional and alternative investments, managed account strategies, world-class research and investment guidance. Our Wealth business serves ultra-high-net-worth
individuals and family offices through Citi Private Bank, operates in the affluent and high-net-worth customer relationship tiers of Citigold® and Citigold Private Client and offers wealth management in the workplace through Citi Global Wealth at Work.

The Business Risk and Controls Manager is part of Global Wealth Control team focusing design and execution of control framework for MCA Testing for Investment and Insurance business for Wealth business. This position reports to the Wealth Client Segments Control Testing Head within the Citi COO
organization’s Central Controls Capabilities; and is a strategic- and execution-oriented leadership role accountable for end-to-end control testing for this position’s specified business/segment – i.e., operational controls performance assurance/testing – which includes design, results reporting, and insight sharing related to the above scope of controls testing. Developed communication and diplomacy skills are required to guide, influence and convince others, in particular colleagues in other areas and occasional external customers. Accountable for controls testing results and advice regarding the controls execution. Excellent management and communication skills required to negotiate internally, often at a senior level. Developed communication and diplomacy skills are required to guide, influence and convince others, in particular colleagues in other areas and occasional external customers. Accountable for controls testing results and advice regarding the controls execution. Necessitates a degree of responsibility over technical strategy. Responsible for supporting their manager in handling staff management issues, including resource management and allocation of work within the team/project.

Responsibilities:
• Coordinate and contribute to governance and the facilitation of the execution of the Manager Control Assessment (MCA) as required by the MCA Standard including the assessment and appropriate approval of risk associated with business changes. Individual will be part of Centralized MCA Testing and Monitoring Utility team within Wealth organization and will be focused on performing monitoring and Testing for Investment
Solution MCA across Private Bank, Trading Desks and CG/CPC Investment Solution.
• Supports the Controls Testing Utility by acting on assessing control design, designing control testing tools, developing control testing procedures, ensure control testing
transitions, dispositioning exceptions, and developing insights.
• Carries key responsibility for Control Design Assessment (CDA) by resolving escalations, defining the work plan, and designing the quality review process.
• Play a key role in engaging with Investment Risk Assessment and Control design team and Investment Solution Business Execution team in assessing, designing control mapping in respective ARCMs within relevant AUs.
• Contribute to the quality, completeness, and accuracy of the implementation of the Control Framework, including Risk Control Policy, Control Standard, Issue Management Policy, Lesson Learned Policy and Control Inventory.
• Appropriately assess risk when business decisions are made, demonstrating particular consideration for the firm's reputation and safeguarding Citigroup, its clients and assets, by driving compliance with applicable laws, rules and regulations, adhering to Policy, applying sound ethical judgment regarding personal behavior, conduct and business practices, and escalating, managing and reporting control issues with transparency, as well as effectively supervise the activity of others and create accountability with those who fail to maintain these standards.
• Partner with the team for the identification of issue root cause, partnering with control and process owners to recommendations holistic corrective actions and improvements, for issues identified as part of MCA Testing and Monitoring.
• Helps driving continuous improvements in accuracy, efficiency, timeliness, and quality of MCA control design assessment and controls testing.
• Support with the timeliness, accuracy and completeness of the MCA through controls prior to the execution of a process.
• Influence decisions to ensure adherence to the MCA Standard through controls after the execution of a process (QA).
• Coordinate and contribute to Operational and Compliance Risk in accordance with established Policy requirements.
• Support Risk Appetite and monitor / assess exposures against this in accordance with
enterprise requirements (if applicable).

• 5-8 years of experience.
• Must have exposure to 2-3 years of Risk, Control, Audit, Testing roles
Outstanding leadership, communication, and influencing skills as this leader will work with Sr
leaders, and audit partners on a regular basis. Relevant experience in financial services,
with enhanced knowledge of the Branded Cards business preferred.
• Project management and governance experience with demonstrated ability to achieve and exceed critical milestones.
• Must have ability to foster working relationships with other leaders across multiple lines of business and with support organizations including auditors and regulators.
• Demonstrated judgement and critical thinking skills.
• Bachelor's/University degree or equivalent experience.

JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

Responsibilities

• Making collection calls
• Timely and effective collection of all debts and customers payments
• Negotiating re-payment plans
• Liaising with lawyer to follow up on the legal action taken against the bad paymasters
• Liaising with vehicle repossessors to follow up on repossessed vehicles
• Maintaining contact with clients to ensure outstanding balance are clear for payment
• Resolving queries both internally and externally around customers outstanding balance
• Posting and allocating daily receipts to accounting systems
• Other ad-hoc admin tasks

Requirements

• Diploma with 2 years relevant experience in going through the whole cycle of legal process of debt collection is preferred
• Ability to advise on what legal action is best at different stages of debt collection
• Ability to establish and maintain good client relationships, both internally and externally at all levels
• Ability to reconcile complex accounts and have excellent attention to detail
• Calm, confident manner to handle potentially uncomfortable conversations
• basic + AWS + VB, 3 mins walk from Newton MRT, Monday to Friday: 08:30 AM - 05:30 PM
• Job Reference: L6558XR5

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

Tel: 6950 9754

EA Registration Number: R22110899

EA License number: 02C4944

EA Personnel: Celeste Wong Xin Yann

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Roles & Responsibilities

• Implements appropriate control measurements in accordance with QECP Design
• Ensure compliance with the latest environmental regulations
• Coordinate with the Construction Manager and QECP on the ECM Plan
• Proper documentation of all EHS records, certificates, notices and official related EHS correspondence
• Organize HSE promotion and health campaigns
• Assist Safety Officer in planning and directing the HSE functions
• Any other duty required to be performed by ECO

Requirements

• Must be NEA Registered ECO
• Registered ECO with more than 3 years post-registration and relevant practical experience in Civil Engineering Construction works with LTA Projects
• Good knowledge of Government Regulations relating to Occupational Safety, Health and Environmental
• Preferred to have experience in managing OHSAS 18K, ISO 14K, ISO9K

Roles & Responsibilities

• Responsible for carrying out daily pest control activities according to operational schedule
• Monitors and responds to customers’ feedback
• Provides oral and written feedback on work activities
• Uses equipment, chemicals, and pesticide/insecticide products
• Performs any other related duties as instructed by the immediate superior.

Requirements

• Must possess an NEA Vector Control License
• Physical fit to carry out the works.
• Candidates with no experience are welcome to apply

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery in Qxpress.Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

ESD Quality Assurance Inspector

Responsibilities:

• Conduct inspections of incoming materials, in-process products, shipping documents, return shipments, labels and finished goods to ensure compliance with quality standards and specifications.
• Review and interpret specifications and work instructions.
• Perform tests and measurements using various tools and equipment to verify product, workplace and equipment compliance.
• Document and report inspection results, highlighting any defects or non-conformities.
• Collaborate with production and engineering teams to address and resolve quality issues.
• Maintain accurate and detailed records of inspections, tests, and other quality control activities.
• Participate in continuous improvement initiatives to enhance product quality and efficiency.
• Ensure compliance with all relevant safety and quality regulations and standards.
• Assist in the development and implementation of quality control procedures and policies.
• Executes quality related tasks and/or quality supporting tasks per Warehouse Manager/Quality Engineer/Quality Assurance Assistant Manager/Quality and Compliance Head direction.
• Read fine prints on an integrated circuit (IC) and trays.
• Transfer or split IC from tray compartment to another steadily
• Read, write, and understand in work instructions.
• Use simple equipment (Sealer m/c and strapping m/c), inhouse training will be provided.

Requirements:

• Candidate must possess minimum Secondary Education and above
• Required language(s): English – Read and written.
• At least 1 to 2 Year of working experience in the related field is required. For no experience will be consider as contract staff – Grade 1 (inhouse training will be provided)
• Hardworking and independent.
• Team player and able to multi-task.
• The position requires a 5.5-day work week.
• Able to work OT when required.
• Optional:
• Operating of Material Handling Equipment (MHE) and ESD equipment if required (Internal or External training will be provided).
• Computer Literate – Proficiency in Microsoft Office e.g., Excel, etc.
• WMS, SAP, ORACLE (In-house Training provided)