M&E Engineer

Job Detail:

• Basic salary $3,500 - $4,500 (Subject to the experiences)
• VB
• 5.5 days, Mon - Fri 8am - 6pm; Sat 8am - 12nn
• Full 6 days week for the first 6 months of employment
• Aljunied

Job Scope:

• Assist M&E Manager in coordinating M&E specific works on site
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing QA/QC inspections to meet with construction schedule
• ⁠Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices
• ⁠To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendors
• ⁠⁠Responsible for site implementation of safety standards to comply with IMS safe work methods
• Responsible for attendance to daily site co-ordination meeting and provide detail co- ordination with sub-contractors

Job Requirements:

• Degree in M&E Engineering ONLY (Recognized Degree by BCA/PEB)
• Minimum 2-3years in construction related experiences
• Possess Electrical Trade experiences will be added advantage

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Kok Jean Ray
Registration Number: R22110935
EA Licence No: 16C8004 (Elitez Pte Ltd)

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as a:

Service Engineer

Job description

1. Perform the maintenance service in a proper and correct manner as stated on the checklist

2. Attend emergency breakdown service as instructed by the team leader

3. Carry out testing & commissioning for A&A work and run the small size of project

4. Provide technical support to the Application Team

5. Co-ordinate with the Project and Application departments and provide necessary support when required by the Team Leader

6. Support the systems testing related activities with the Project and Application Teams

7. Liaise with sub-contractor to perform site survey for A&A work and to provide detailed information on equipment quantity and method for the installation to the relevant parties for preparation of quotation

8. Deliver good standard of workmanship and ensure accurate quantity and quality of the equipment to be installed at site

9. Conduct in-house training when is required

10. Perform standby duty and other ad hoc duties as assigned

Key Requirements

• Diploma/ Degree in Mechanical/Electrical/Electronic Engineering
• 2 years’ experience in security systems
• Strong knowledge in network and security systems, able to troubleshoot and rectify the network and systems related issues.

Remuneration:

• $2,500.00 - $3,600.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to: [email protected] for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,500.00 - $3,600.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as an:

Application Engineer

Job description

· Handling various projects under the Service Division and technical support for projects under maintenance.

· Design Building Management System based on Technical Specifications

· Program equipment (ACMV, Electrical, Plumbing, etc.) under BMS based on the sequence of operation.

· Design and implement the graphical user interface, reports, and dashboards based on project requirements.

· Support Testing and commissioning of BMS projects

· Provide Root cause analysis for system faults/issues.

Key Requirements

• Engineering graduate, with knowledge is MS Office.
• Knowledge in MS SQL, VBA, online collaboration platforms and other programming languages is a plus.

Remuneration:

• $2,500.00 - $4,000.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to: [email protected] for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,500.00 - $4,000.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

• Assist and report to the Project Manager at site.
• Ensure that the works are carried out according to the approved drawings and compliances to Authorities’ requirements, quality procedures and EHS requirements.
• Coordinate and work with Consultant, Sub-Contractor and team member for smooth completion of work.

EA Licence No. 16C7962

• Attend to customer enquiries and recommend preventive measures, provide prompt and effective solution to technical problems.
• Provide guidance, pre-sales preparation, costing, quotations, technical assistance, testing and commissioning.
• Attend meetings, site survey and coordinate for smooth operation of works

EA Licence No. 16C7962

Job Description

· To design, develop and implement PLC, HMI, and/or SCADA Application and it's related system, according to technical specification and design practices.

· To prepare technical documentation, wiring diagram, testing procedure

· To conduct field testing & commissioning, where occasional work during engineering hour (night time).

· To provide troubleshooting of control systems on ad-hoc basis.

Job requirements

· Relevant certificate, with at least diploma in any electrical, electronic, mechatronics or equivalent.

· With experience in programming Siemens, Schneider or Allen Bradley PLC, HMI or SCADA.

· Hardware configuration and software coding skills.

· Strong problem-solving and analytical skills

· Customer oriented.

· Good inter-personal communication skills.

· Self motivated with good initiative

• Produce industrial products costing, quotations and engineering data to customers.
• Commitment to customer satisfaction and quality.
• Comply with the requirements of the work environment.
• Know the business environment and market trends and advise to customers.

EA Licence No. 16C7962

Responsibilities:

To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

Prepare method statements, design plans, and specifications.

Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.

Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.

Determine project requirements and estimate resources such as manpower, materials and equipment.

Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.

Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.

Other job duties as assigned.

Requirements:

Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.

At least 1 year(s) of working experience in the related field is required for this position.

Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.

Familiar with Civil, Archi & Steel Structural Works

Experience in process plants handling both consultants with client will be added advantage

Experience:

* 2 - 4 Years of Experience in BIM Softwares (Revit and Cadision)

* CDE - ACC and BIM360

* BIM Revit Content Creation

* Proefficient Microsoft Excel Knowledge - Mandatory

* Meta Data Management and Administration

* Possess Excellent Communication & Interpersonal skill.

Qualification:

* Any degree followed by Higher Secondary Certificate (HSC) Education.

* Specialization in BIM Course with professional Certification - Mandatory

Skill Set:

* Support BIM Coordinator at all type of 3D BIM Modelling and assigned tasks.

* Parametric family creation & LookupTable edit/ Manage knowledge is Mandatory.

* Must have extensive knowledge in creating various kinds of Revit Families.

* Managing Revit Lookup table using Microsoft Excel.

* Hands-on experience in Revit & Navisworks.

* Preparing all kinds of 2D and 3D drawings & deliverables from the Revit model.

* Clash detection and co-ordination using Navisworks.

* Able to handle all types of 2D CAD Drafting Works

• Assist and report to the Project Manager at site.
• Ensure that the works are carried out according to the approved drawings and compliances to Authorities’ requirements, quality procedures and EHS requirements.
• Coordinate and work with Consultant, Sub-Contractor and team member for smooth completion of work.

EA Licence No. 16C7962

• Produce industrial products costing, quotations and engineering data to customers.
• Commitment to customer satisfaction and quality.
• Comply with the requirements of the work environment.
• Know the business environment and market trends and advise to customers.

EA Licence No. 16C7962

Our Company

Our Company, Dex-Lab Pte Ltd, is a pioneering robotics and A.I company specializing in development of humanoid robotic solutions for healthcare, education and entertainment. Our mission is to drive workforce sustainability by deploying social robots that augment routine and repetitive tasks.

We are offering a unique job opportunity to join our multi-disciplined team of engineers, designers and artists where you can grow your skills while working on cutting-edge projects at the forefront of innovation.

Job Description

The selected candidate will be involved in the production of in-house humanoid robots for sale, offering after-sales maintenance support, and assisting with various ad-hoc tasks.

Additionally, based on your skill set and interests, you’ll have the chance to explore a wide range of career opportunities, including Operations, Robotics Software, Multimedia Design, and Marketing.

Key Responsibilities

• Assembling robots, including mechanical and electronic components, based on provided designs.
• Developing and interpreting electronics schematics and mechanical drawings.
• Wiring and integrating electronic systems for robots and related devices.
• Troubleshooting mechanical and electrical issues in robotic systems.
• Conducting tests and diagnostics to ensure proper functionality of robotic components.
• Maintaining and improving the assembly process to ensure efficiency and quality.
• Collaborating with the engineering team to optimize designs for assembly and performance.
• Documenting findings and providing regular updates to the engineering team.
• Assisting with inventory management and ensuring all tools and materials are available for assembly.
• Participating in the recruitment and training of junior engineers or apprentices.
• Attending relevant workshops and conferences to stay updated on advancements in robotics and mechatronics.
• Carrying out ad-hoc duties, such as on-site maintenance and system checks.

Requirements

• Diploma or BSc in mechatronics engineering, electronics, mechanical engineering, or a similar field.
• Strong knowledge of electronics schematics, wiring, and mechanical systems.
• Practical experience in robot assembly and troubleshooting.
• Ability to work independently or as part of a team.
• Strong problem-solving, analytical, and creative thinking skills.
• Passionate about robotics and engineering with a hands-on approach to tasks.

Senior Resident Engineer (SRE-C&S)

a. Minimum eight (8) years of relevant experience as a civil & structural engineer, of which at least 6 years on projects similar in size and complexity; in particular deep excavation, foundation, cut and cover tunnel works and building works;

b. Possess a Civil and Structural Engineering degree recognized by the

Professional Engineers Board of Singapore;

c. Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;

d. The SRE shall be proficient in contract administration with Public Service

Sector Conditions of Contract (PSSCOC);

e. Demonstrate capability to manage the Supervision team to monitor, supervise and inspect works as directed by CAG, QP(S), QP(Geo) and/or the project consultants and FUI owners, including planning the roster shift duties based on the work schedules of the contractors and ensure the welfare of the personnel reporting to him are well taken care

of. The shift roster shall comply with all relevant Acts and Regulations;

f. Past project experience in leading supervision teams in projects of similar nature. He/she must demonstrate proven commitment to safety and health on site, possess excellent leadership qualities, organisational and inter-personal skills;

g. Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report;

h. Possess strong supervision and leadership skills;

i. Conversant with all procedures in the Workplace Safety & Health

Manual.

- Up to $3,800

- Tuas

- With AWS + Variable Bonus

- Monday to Friday (8am to 5.30pm)

Responsibilities:

• Work on delicate Radar System for preventive and corrective maintenance on sites.
• Execute maintenance tasks within the committed TAT, Ops availability and good quality
• Liaise with customer for maintenance activities
• Perform maintenance activities and ensure tasks are performed accordingly to requirements
• Monitor and activate replenishment of consumables at reorder level
• Schedule and perform calibration of tools and equipment
• Provide inputs and prepare documentation required to complete job
• Manage inventory of authority furnished spares
• Perform housekeeping
• Response to customers’ requirements

Period:

• 1 Year Contract (Renewable)

Location:

• Tuas
• Shuttle Service to and from Tuas Naval Base at Joo Koon MRT (AM and PM)

Working Hours:

• Monday to Friday (8am to 5.30pm)

Salary:

• Basic Salary up to $3,800 (Depending on experience and qualification)
• Plus AWS
• VB (Subjected to individual and company performance)

Requirements:

• Diploma/ITC in Engineering in Electronics or equivalent
• Knowledge of EO/Radar maintenance experience would be advantageous
• Able to perform 24/7 stand by
• Physically fit and able to lift heavy loads
• Able to work at height and do not have height phobia
• Good team player and yet able to work independently.
• Valid Class 3 driving license would be advantageous.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R2198469)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Resource Centre Pte Ltd (EA License Number: 04C3201)

3 Shenton Way, Shenton House,

#19-01 Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

• Working Days: 5.5 Day A Week (Monday – Friday), Saturday need work half day (can claim OT)
• Working Hours: 8:30am -5:30pm
• Office at City Hall, working at site (Island wide, depends on project)
• Salary: $4800 - $6200

Requirements:

• Must hold a valid registration with MOM as a WSH Officer and with NEA as an ECO.

Responsibilities:

• To assist the Project Manager in implementing the safety management system to ensure staff and workers work in a safe and healthy environment.
• To assist the Project Manager in implementing the permit to work system and to stop & report to the project manager any incompatible works relating to the same.
• To act as the secretary of the Project WSH Committee and chair the meeting such that the staff and subcontractors are aware of the site activities and the required actions.
• To assist the Project Manager in complying with the WSH Acts and Regulation.
• To conduct periodic safety inspection to verify level of safety compliance so that the safety standards are constantly improved.
• To ensure site compliance with statutory safety requirements and in-house safety rules and regulations and to report any deviations to the Project Manager for management consideration.
• To recommend to the Project Manager any necessary corrective measures to be taken on safety non-compliance and deviations to enhance the site safety.
• To update site management on any new or changes to current statutory safety requirements and take the necessary actions.
• To investigate any accident/ dangerous occurrence/ incident and recommend corrective measures to prevent recurrence.
• To liaise with officers from MOM/NEA /PUB on matters pertaining to safety, mosquito breeding, ECM etc and take the necessary action for their comments.
• To conduct safety training and organise safety promotional activities.
• To ensure safety documentation is kept current and ready for MOM, NEA or ISO Audit.
• Carry out the works assigned for compliance with requirements of ISO 9000, ISO 14001 and OHSAS 45001
• Be involved in the evaluation of risk assessment and plan, manage and review Management Programmes.
• Be involved in all the sub-con safety and health matters pertaining to the site.
• Prepare and submit the site environment control Programme and ensure that the staff and workers are aware and understand the intention.
• Inspect the site to ensure that all facilities and equipment relevant to the maintenance of the environment health are in working condition.
• Assist the authority to investigate outbreaks of infectious, vector-borne disease.
• Organise campaigns, training course to develop and sustain the interest of workers in maintaining good environment health standards.
• To assist the Project Manager in the management of the workers e.g. their courses, reporting sick, home leave, accommodation.
• To assist in achieving the safety standards required by the site’s developer.
• Be involved in safety aspects for planning of activities that are in view of the public or in area that the public uses.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Our client is a global leading cloud infrastructure provider that leverages innovative technology - Hyperconverged infrastructure, HPC with CDI Architecture, AI/ML, Advanced Cooling - to help worldwide customers meet their needs for sophisticated data center operation

Role: Quality Technician
Duration: 6 months (May be offered perm during interview)
Location: East
Working days; 5 days Monday to Friday
Working hours:
AM shift: 7am to 3pm
PM shift: 3pm to 11pm (Shift allowance $6/day)
Night shift: 11pm to 7am (Shift allowance $17/day)
Salary: Up to $3k

Roles and Responsibilities:

• Work closely with engineer in handling defective found
• Assist in material rejection and define defective material flow
• Work with supplier on the root causes or FA report
• Monitor and keep track of all material rejection
• Assist in Kaizen activities and ISO activities

Requirements:

• Nitec / Diploma in quality or engineering with at least 1-3 years of working experience in Server & Rack manufacturing environment
• Able to work independently and a team-player as well
• Good knowledge in handling RMA process, IPQC in server & rack production
• Relationship oriented and self-motivated to achieve target
• Good communication skills, interpersonal skills and presentation skills
• Knowledge of SAP is advantage

We regret to inform that only shortlisted candidates will be notified.

Interested candidate, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/9199

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel extensively (approximately 10 months per year) to China and Vietnam. Travel includes four round-trip tickets to Singapore annually, with separate living arrangements provided.

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for a minimum of 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Position title: Warehouse Supervisor
Location: Bukit Merah
Working days: 5 days [ Mon - Fri ]
Working hours: 8:30am - 6pm
Salary : SGD $2,700 - $3,400

Job Description

• The Warehouse Supervisor is responsible for overseeing the daily operations of the warehouse,
• ensuring that all processes are efficient, and that materials and products are handled according to
• GMP standards. This role involves supervising a small team of 2 warehouse assistants, maintaining stock accuracy, and coordinating incoming and outgoing shipments while upholding safety regulations.

Key Responsibilities:

Daily Operations Management:

• Supervise and manage daily warehouse activities, including goods receiving, storage, and dispatch.
• Lead and manage a team of 1 to 2 warehouse assistants to achieve daily operational goals.
• Ensure compliance with workplace safety and health regulations, maintaining a clean and safe working environment. Oversee the cleanliness of level 2, 4, and 5 warehouses, ensuring proper housekeeping standards.

Inventory Control & Documentation:

• Conduct Goods Received Notes (GRN) for all incoming materials.
• Organize and allocate stocks and materials in the correct storage areas
• Generate and paste QC-approved labels on all approved materials.
• Prepare Delivery Orders (DO) and packing lists for outgoing products, ensuring proper packaging standards are followed to avoid damage during transit.
• Monitor inventory levels and alert management when a new Purchase Order (PO) needs to beraised.
• Lead periodic stock counting, adjusting stock records as needed after approval from the Production Manager.
• Manage stock transfers among warehouses as well as internal departments and coordinate with subcontractors for rework materials.

Team Training & Development:

• Provide GMP (Good Manufacturing Practices) and in-house training to warehouse assistants, ensuring team members adhere to company standards and support team members in achieving daily and long-term operational objectives.
• Suggest and implement improvements to warehouse processes to enhance efficiency and reduce waste.
• Monitor and support in disposal, waste segregation and waste management activities as per NEA requirements.

Stock Monitoring & Reporting:

• Monitor inventory for missing or lost items and report any discrepancies to management promptly.
• Coordinate the receipt, storage, and dispatch of products and materials, ensuring accuracy and timely processing.
• Generate product labels as per customer requirements and ensure correct labelling for outgoing shipments.

Requirements

• Minimum 'O' Level or equivalent.
• At least 2-3 years of experience in warehouse operations, preferably in the FMCG industry.
• Knowledge of GMP and warehouse safety protocols.
• Proficient in warehouse documentation and processes, familiar with inventory management and stock control systems.
• Knowledge of SAP system will be an advantage
• Must have a valid forklift license.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Position title: Product Development and Management Executive (Cosmetic)

Working location: Pasir Panjang

Working Days: 5 days work

Working hours : 9am - 6pm
Salary Range: $3500 to $4200

Responsibilities:

1. New product planning:

• Analyse industrial trends, market data and customer insights to derive constructive ideas and information for the purpose of NPD.
• Define product competitive positioning and unique selling proposition (USP).

2. New product development (NPD):

• Responsible for entire NPD process; from concept initiation to completion, for both new product and reformulations.
• Take the lead in close collaboration with cross functional teams such as Regulatory, Marketing, Supply chain, Contract manufacturers, R&D and Quality, for seamless on-time delivery of products.
• Source for contract manufacturers and liaise with formulators to develop new product; be the main contact point with these suppliers for NPD/ formulation discussions.
• Review formulas and ingredient/ design statements for new product that is compliant with regulations.
• Familiar with the concept of product challenge test, stability, and compatibility studies.
• Research market prices, create accurate product costing data and propose product pricing.

3. New product introduction:

• Conduct product training to regional trainer/marketing team and key leaders of salesforce.

4. Post-launch product management:

• Analyse product performance and identify actions required.
• Manage product feedback and propose technically sound customer-centric reply.
• React to necessary corrective and preventive actions (CAPA) raised by Quality.

5. Contribute for and implement standard procedures (in compliance with industrial standards and QMS requirements) for any product development and management activities or as assigned.

Requirements:

• Degree in Cosmetic Science or Chemistry.
• Minimum 2 years of experience in product development/ management in the cosmetic and skin care industry.
• Bonus if candidates have prior experience with beauty/personal care/medical device.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Summary Benefit:

• Salary range: $2000-$2800
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

Trinax is a creative technology agency dedicated to producing the highest quality omni-channel experiences across marketing, gaming, and technology. Our award-winning projects combine innovative, interactive technologies with creativity. As we expand, we're looking for a disciplined and motivated Quality Assurance (QA) Lead to join our team!

As a QA Lead, you will play a crucial role in leading the QA process, ensuring that every project we deliver meets the highest standards. You will collaborate closely with software and project teams, providing insightful feedback and adopting new tools and technologies to enhance our work quality.

Key Responsibilities:

• Lead and manage the QA process, providing guidance and mentorship to the QA team.
• Review and analyze system specifications to develop comprehensive test strategies and plans.
• Execute test cases (both manual and automated) and analyze results to ensure the highest quality product delivery.
• Collaborate closely with the software team to develop effective testing strategies, ensuring a smooth process throughout the software development lifecycle.
• Document and log testing phases and defects, reporting bugs and errors to the development team.
• Provide clear, tactful, and insightful feedback to the software team, maintaining strong working relationships.
• Advise teams on potential software improvements, contributing to better design and development.
• Present findings and recommendations clearly to stakeholders, demonstrating how to enhance software performance.
• Work under pressure to meet tight deadlines, ensuring timely, high-quality deliverables.
• Stay current with new technologies and testing tools to continuously improve QA processes.

Key Qualifications:

• Minimum of 2 years of relevant QA experience.
• Diploma or higher education qualification in a relevant field.
• Specialized accreditations in QA or Software Testing preferred.
• Strong understanding of the software development process and ability to quickly grasp business and customer expectations.
• Analytical mindset with excellent problem-solving skills and attention to detail.
• Strong communication and consultancy skills to effectively relay issues and insights to the software team.
• Solid presentation skills to demonstrate how the software can be improved.
• Ability to thrive in a fast-paced environment, managing tight deadlines and pressure.

Why Join Trinax? At Trinax, you will have the opportunity to work on exciting, innovative projects across various disciplines, collaborate with passionate professionals, and enhance your skills with the latest technologies and tools. If you're motivated by creativity and quality, we want you on our team!

Apply today and help us deliver exceptional, quality-driven experiences to our clients.