Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

The Client is a global aerospace company.

Responsibilities:

• Ensure product and process quality by maintaining the quality management system and complying with relevant regulations and customer requirements.
• Update and improve quality procedures and control instructions.
• Address non-conformance issues with customers, vendors, and suppliers, conduct root cause analysis, and implement corrective actions to minimize quality-related costs.
• Conduct internal audits to assess the quality system, products, and processes (ISO9001 / AS9100 / NADCAP).
• Perform audits of vendors and on-site as needed.
• Adhere to customer and regulatory standards.
• Work to reduce monthly costs associated with poor quality and scrap.

Requirements:

• Degree in Mechanical or Aeronautical Engineering or a related field.
• At least 2 years of experience with ISO9001 / AS9100 Quality Management System and NADCAP.
• Proficiency in problem-solving tools such as fishbone diagrams, FMEA, and the 5-whys methodology.
• Ability to read and interpret technical drawings.
• Strong analytical and communication skills.
• Ability to multitask and attention to detail.
• Familiarity with NADCAP processes like heat treatment, non-conventional machining, shot peening, and chemical processing is a plus.

· Responsible for developing, implementing, and maintaining Quality Plan for FA and production parts.

· Responsible for maintaining company measuring instruments.

· Interpret and analyse customer specifications with great details

· Identify, document, and report defects or anomalies, working closely with cross-functional teams to address and resolve issues promptly.

· Facilitate meetings for production and quality personnels

· Support in internal and external audits.

· Maintaining Company’s Quality Management System (QMS)

· Any other duties as assigned by Supervisor.

Job Requirements:

· Technical certificates in any Engineering field

· Effective communication skills, both written and verbal, to liaise with customers and suppliers

· Ability to work with production and office staffs

· Ability to write root cause analysis

· Flexibility and adaptability to take on new challenges and responsibilities.

· Ability to read and interpret mechanical drawings

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24124

What will you do?

We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.

In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes.

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

• Participates and conducts daily status meetings with project managers and technical support teams
• Prepares and distributes daily or weekly status reports on test progress to the project team and/or stakeholders.
• Oversee and assign tasks to team members
• Conducts Knowledge Transfer sessions and trainings for on-boarding members
• Define different scenarios for functional and integration testing
• Create and document test scripts based on functional specification requirements
• Review test cases for functional and integration testing based on the identified scenarios
• Perform data setup, run test scripts, and record test results
• Record, manage, and monitor defects in JIRA
• Provide UAT support, including system log extraction, environment readiness verification, JIRA retesting and routing, and database data extraction as needed
• Validate production issue fixes in SIT and assist with UAT verification until JIRA closure and sign-off, including support for hot fixes.
• Manually executed designed test scripts and capture test results

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

Job Description:

We are looking for an experienced Electrical, Instrumentation & Control Engineer (EIC Engineer) to manage and execute the design, installation, and maintenance of electrical, instrumentation, and control systems across a variety of projects. The ideal candidate will have a strong background in electrical and control systems engineering, as well as hands-on experience with instrumentation, PLCs, SCADA, and DCS systems.

Key Responsibilities:

• Design & Implementation: Design, develop, and implement electrical, instrumentation, and control systems for industrial projects.
• System Configuration: Configure and program PLC, SCADA, and DCS systems to ensure seamless automation and control.
• Installation & Commissioning: Oversee the installation, commissioning, and testing of electrical and control systems on-site.
• Maintenance & Troubleshooting: Perform preventive and corrective maintenance on electrical, instrumentation, and control systems.
• System Calibration: Calibrate and validate instruments to ensure accuracy and proper functioning.
• Safety Compliance: Ensure all electrical and control systems adhere to safety standards and regulations (IEC, NEC, ATEX, etc.).
• Collaboration: Work closely with cross-functional teams, including electrical engineers, mechanical engineers, and project managers, to meet project deadlines.
• Documentation: Maintain detailed documentation of designs, configurations, test results, and maintenance activities.

Qualifications:

• Education: Bachelor's Degree in Engineering, Instrumentation Engineering, Control Systems, or a related field.
• Experience: Minimum of 1 years of experience in electrical, instrumentation, and control engineering, with a focus on industrial applications.
• Technical Skills:Proficient in the design and configuration of electrical systems.
  Hands-on experience with PLC programming
  
• Problem-Solving: Strong troubleshooting and analytical skills in electrical and control systems.
• Communication: Excellent written and verbal communication skills.
• Certifications: Relevant certifications (e.g., Certified Control Systems Technician) are a plus.

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Instrumentation and Control Engineer
• Working Location: Islandwide
• Working Hours: Monday – Friday, 9.00am – 6.00pm
• Salary Package: Up to $4200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Develop solutions for complex technical issues in sectors including life sciences, power, water treatment, chemical, petrochemical, shipyard, and oil and gas.
• Perform calibration of various measuring instruments such as pressure, temperature, flow, radar level, analyzers, and wireless devices; collect and record data accurately.
• Calculate calibration metrics including range, mA, frequency, required output, and accuracy, documenting the results.
• Analyze and compile technical and statistical information to create detailed reports.
• Maintain accurate and up-to-date engineering documentation.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Diploma or Degree in Electrical, Electronic, or Instrumentation Engineering.
• At least 3 years of relevant experience in a similar field.
• Possess valid Class 3 driver's license.
• Knowledge of Mechanical and Measuring Instruments.
• Excellent reading, writing, and verbal communication skills.
• Skilled in technical report writing and able to interpret schematic diagrams.
• Willing to work at various locations island-wide.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71604 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Instrumentation and Control Engineer
• Working Location: Islandwide
• Working Hours: Monday – Friday, 9.00am – 6.00pm
• Salary Package: Up to $4200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Develop solutions for complex technical issues in sectors including life sciences, power, water treatment, chemical, petrochemical, shipyard, and oil and gas.
• Perform calibration of various measuring instruments such as pressure, temperature, flow, radar level, analyzers, and wireless devices; collect and record data accurately.
• Calculate calibration metrics including range, mA, frequency, required output, and accuracy, documenting the results.
• Analyze and compile technical and statistical information to create detailed reports.
• Maintain accurate and up-to-date engineering documentation.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Diploma or Degree in Electrical, Electronic, or Instrumentation Engineering.
• At least 3 years of relevant experience in a similar field.
• Possess valid Class 3 driver's license.
• Knowledge of Mechanical and Measuring Instruments.
• Excellent reading, writing, and verbal communication skills.
• Skilled in technical report writing and able to interpret schematic diagrams.
• Willing to work at various locations island-wide.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71604 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Descriptions:

• Perform accurate mechanical, physical and visual inspection of components
• Ensure that all parts and components have been tested and measured within specifications/tolerances.
• Initiate Non-Conformance reports as required.
• Communicate with supervisors, mold technicians and other staff to resolve inspection questions.
• Accurately document the results of the inspections and testing on the computer in various programs
• Read and interpret specifications and drawings
• Report any product defects immediately to the technician
• Support the implementation of ISO registration, compliance and audits
• Maintain calibration, first article, internal auditing and training programs
• Direct customer and supplier support for quality matters verification if required

Job Requirements:

• Minimum ITE in engineering or other relevant fields with 3 years of experience
• With relevant Quality Control experience in Plastics Mold preferred
• Practical understanding of precision tooling
• Ability to use basic hand measurement tools (calipers, micrometers, gauge pins, etc.) required
• Experience with visual and touch probe CMMs (Zeiss, Nikon) and Optical comparator desired
• Experience with metrology, GD&T, technical drawing reading
• Fluency in ISO program management and implementation is an asset
• General computer proficiency
• Able to perform Over time
• Able to perform rotating shift

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Job Description

· Collaborate with cross-functional teams such as Mechanical Engineers, Test Engineers, Lab Technicians, and Project Engineers to execute ocean basin model testing projects, such as floating offshore wind projects.

· Analyse and comprehend project requirements related to hydrodynamic testing, model instrumentation, and data acquisition.

· Select and implement suitable data acquisition systems, control system design, and develop software architecture specific to ocean model testing needs.

· Develop and maintain application software for new ocean basin test setups and custom test requirements.

· Upgrade existing software systems to accommodate new test protocols or methodologies for ocean model testing.

· Choose appropriate sensors for wave, current, and motion measurements, ensuring seamless integration with control systems and software.

· Create and update documentation, including software designs, changes, user manuals, and standard operating procedures (SOPs) for ocean model tests.

· Upgrade LabVIEW-based software applications to newer versions, ensuring they meet the latest testing requirements.

· Troubleshoot and resolve issues in control systems, data acquisition, and software during model testing.

· Test and validate application software before deployment to the ocean basin test setup.

· Prepare comprehensive user manuals, SOPs, and provide training for test engineers to ensure smooth operation of the test environment.

Job Requirements

· Minimum qualification: Bachelor of Engineering (BEng) / Bachelor of Technology (BTech) in Electronics, Electrical, Instrumentation, or Computer Science with at least 2 years of relevant experience, particularly in LabVIEW.

· Proficiency in different versions of LabVIEW, including the latest versions with relevant toolkits.

· Experience in designing and developing NI LabVIEW-based data acquisition and control systems for ocean basin model testing or similar environments.

· Proven ability to develop modular and scalable applications using LabVIEW?s standard architecture.

· Experience in developing LabVIEW applications for Windows and Real-Time (RT) Linux environments.

· Proficiency in integrating NI hardware systems such as PXI, cRIO, and CompactDAQ into the testing framework.

· Hands-on experience with communication protocols like TCP/IP, UDP, Serial, USB, CAN, and EtherCAT for testing and control purposes.

· Experience with integrating third-party programmable instruments (e.g., multimeters, power supplies, oscilloscopes) and controllers into ocean testing setups.

· Experience in developing NI software drivers for third-party hardware and integrating third-party software with LabVIEW.

· Knowledge in selecting, wiring, and troubleshooting sensors used in hydrodynamic and ocean model testing (e.g., pressure sensors, accelerometers, flow meters).

· Experience in reading control panel schematics, designing control systems, and selecting appropriate control panel hardware for model testing.

· Strong team player with the ability to work independently and collaborate in cross-functional project teams.

· Experience interfacing induction motors with VFDs and control systems, with knowledge of VFD configuration for use in testing environments.

· Strong troubleshooting skills at the signal and system level for data acquisition and automated test systems.

· Excellent documentation skills for capturing test requirements, preparing software designs, and writing user manuals.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Responsibilities

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Requirements

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Interested applicants, please Email , and look for [email protected]

John (Joax) Wong

Recruit Express Pte Ltd

EA License No. 99C4599

EA Personnel Registration Number: R23117179

We regret that only shortlisted candidates will be contacted.

Create unit tests throughout the data and algorithms domain:

 Work with engineering and business teams to implement wide-coverage unit tests

of data and engineered features at different stages throughout the data collection

and processing pipeline;

 Create unit tests of inputs to and outputs from the algorithms that drive the clinical

service;

 The unit tests include validation of the inputs and outputs of black-box machine

learning algorithms;

 Establish a regular process to execute the tests and document their outcomes as

a part of our product development and release lifecycle;

2. Implement and refine mechanisms to continuously archive the state of algorithmic inputs

and outputs:

 Implement a process of taking snapshots of data/features input into algorithms

necessary to recreate their outputs/predictions at any point in the past during the

service;

 Communicate requirements to the software development team

3. Assist in the successful delivery of regular service analytics and reports:

 Support the business and analytics teams in their daily and weekly delivery of

reports on data completion, user engagement, and algorithm actions by

addressing any data quality and validation requirements;

REQUIREMENTS

a) Bachelor's degree in computer science, engineering, business analytics, technology, or a

related field.

b) Minimum of 2 years of experience in data engineering, data analytics, or data product

management roles within the tech industry. Experience in healthcare is a plus.

c) Ability to implement tests in Python.

d) Good understanding of the validation requirements of an algorithmic product. Knowledge of

healthcare regulation and auditing requirements is a plus.