Job Scope:

• Develop and implement quality control procedures and policies
• Conduct inspections and audits to ensure compliance with quality standards
• Monitor and test materials, products, and processes to verify quality
• Identify and resolve quality issues and non-conformance
• Review project specifications, drawings, and standards for quality requirements
• Prepare quality reports and document test results and inspections
• Coordinate with suppliers and subcontractors to ensure quality requirements are met
• Perform root cause analysis for quality failures and implement corrective actions
• Ensure that safety and environmental standards are followed during inspections
• Train and mentor staff on quality control processes and best practices
• Maintain records of quality inspections, certifications, and test results
• Support project managers in quality planning and control
• Ensure continuous improvement in quality processes and systems

Requirements:

• Engineering degree
• 5+ years of QA/QC experience in construction
• Experience in structural steel or precast RC works
• Strong interpersonal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

About the role

To support R&D department in conducting laboratory tests, sample preparation and executing technical and quality control documentation/testing while co-ordinating with various departments to ensure smooth running of the organisation.

Roles & Responsibilities

Sample Preparation

• Receive and label all raw materials brought into the lab for accountability.
• Maintain inventory of chemicals.
• Prepare materials for experiment and assist R&D activities..
• Assist R&D Engineer to conduct experiments and operate equipment.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• 
  

Measurement & Calibration

• Perform periodic calibration of equipment and reporting of any malfunctions.
• Assist in troubleshooting and maintenance of all testing equipment.
• Ensure proper housekeeping of laboratory on a daily basis.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Perform Laboratory Data Analysis and Reporting

• Recording and reporting of experimental results and trends.

Quality Control

• Perform in process quality check and physical test on in-process materials & finished products
• Testing of properties of aerogel products and co-ordinating with 3rd party laboratories.
• Prepare QC documents for all batches in production department

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Assist workplace safety initiatives.
• Implement and manage waste disposal and coordinate with chemical disposal companies.

Requirements

• ITE / Diploma in Chemical Engineering, Chemistry, Biotech, Lifesciences and Pharma etc.
• Years of work experience: At least 1 - 3 years.
• Training will be provided.
• Knowledge of safe handling of chemicals
• Possess basic computer skills and Microsoft Office applications.
• Team player and able to work independently

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Qua_Ctrl in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, details of your educational background and work experience.

In this role, you will:

• Engage in one or more projects to boost QC team productivity or digitalization, tailored to your interests and strengths.
• Job shadow and on-the-job training with the QC team to understand cable manufacturing and testing processes.
• Prepare technical reports per customer specifications, documenting data from QC inspections and tests.
• Perform daily tasks including inspections, data entry, report preparation, and other ad hoc duties.
• Assist in QC tests.

Job requirements:

• Basic knowledge in quality assurance or systems and/or process optimization is a plus.
• Skilled in MS Office (Excel, PowerPoint) and practical, hands-on tasks.
• Receptive to feedback and keen to learn from experiences.
• Lead tasks proactively and seek clarification when needed.
• Comfortable working with data.

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond January 2025

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Quality Control Analyst with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Key Responsibilities:

• Sample storage and management
• Prepare and support analytical testing
• Analytical testing and documentation
• Perform lab housekeeping activities
• Perform administrative documentation
• Comply with all HSE guidelines
• Detect and report potential accident, risks and propose solutions
• Responsible for participating in initial training and retraining

Qualifications:

• Proficient in English.
• Previous experience working in a laboratory environment in the pharmaceutical industry (quality assurance, production).
• Nitec or Diploma holders

This position is for permanent 12-hr night shift, 2-3-2 basis.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

Job description:
• Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications.
• Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.
• Maintain the control of the manufacturing environment and perform gowning as necessary.
• Perform recording of inspection data, monitoring data and other data in accordance to Records Control requirements.
• Perform other tasks as assigned by the supervisor.
• Work experience as an quality inspector.

Candidate Profile & Requirements:
• Candidate must possess at least a Secondary School/"O" Level, Higher secondary/PreU/A level/College,Professional Certificate/NiTEC, any field.
• At least 2 years of work experience as inspector in a machine shop.
• Proficient in regular measurement instruments. Capable of operating CMM is an advantage.
• Able to read and understand engineering drawings and GD&T.
• Good interpersonal skills; organized; self disciplin.

JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

Responsibilities:

· Create, control and distribute QA related documents

· Register, track and maintain records of all incoming/outgoing drawings, documents from clients/suppliers

· Project documents/drawing submission thru Aconex

· Plan, implement and organize ISO 9001, 14001, 18001 & Bizsafe audit (Internal & External)

· Maintain proper documentation in accordance to IMS requirements

Requirements:

· Possess Diploma/Degree in Civil Engineering

· Preference with/without experience

· Proficient in MS Office

· Preference will be given to those who with experience

* Cleaning service

* Location: Changi Airport

* 5.5days

* 8:30am - 5:30pm

Job Description:

• Collaborate with the Resident Manager & Assistant Managers to establish standard operating procedures for ground operations.
• Inspect daily tasks performed by ground staff.
• Employ a coaching approach to reinforce SOPs with ground staff: supervisors and housekeeping staff.
• Mentor new staff during orientation.
• Implement skills enhancement programs for ground staff to boost performance.
• Update training schedules for cases of non-conformance and monitor improvements to bridge skills gaps.
• Coordinate and conduct training sessions on safety, quality, and environmental subjects.
• Undertake any other assigned ad-hoc tasks by the Manager.

Job Requirement:

• Possess a minimum Diploma/Degree in a relevant field of study and be open to training.
• Proficient in Microsoft Office applications (Excel, Word, etc.).
• Capable of working independently and thriving under pressure.
• A team player who can handle multiple tasks in a fast-paced setting.
• Willing to work shifts and overtime occasionally.
• Good communications skills are preferred.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Astek has an opening of Quality Engineer role for our projects in Singapore.

Responsibilities:

• Develop and maintain automated test cases, test plans, and test frameworks, ensuring alignment with evolving requirements and policy changes.
• Build, enhance, and manage the automated test framework and test environments.
• Execute testing on new features and document any defects identified.
• Conduct a variety of tests, including manual, functional, performance, and exploratory, while also supporting User Acceptance Testing (UAT).
• Assist in troubleshooting and resolving production issues.

Requirements:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 3-5 years of professional software quality testing experience, with hands-on automation expertise.
• Strong knowledge of testing methodologies, risk analysis, and test-driven development.
• Proficiency in Java or Kotlin, with Spring Boot knowledge a plus.
• Experience with automated testing frameworks like Cucumber, TestNG, Playwright, and performance tools like JMeter or LoadRunner.
• Familiarity with penetration testing tools such as ZAP, Burp Suite, and CheckMarx.
• Proven ability to work in SCRUM teams with excellent communication and collaboration skills.

Element has an opportunity for an experienced Quality Engineer. Reporting to the Principal Quality Manager, you are an essential member of the management team and responsible for the overall quality performance. This includes implementation, maintenance and improvement of Element quality management system (QMS). The successful candidate will have a sound working knowledge of ISO/IEC 17025, ISO/IEC 17020 or ISO/IEC 17065 requirements in relation to testing, calibration inspection and certification.

In this role, you will have interaction with clients, Accreditation Bodies and will be responsible for advising operational colleagues of the importance of quality, accuracy and integrity in the provision of the testing, calibration inspection and certification services we provide.You will be involved in leading quality at a local level and will work closely with the Principal Quality Manager to ensure that Element quality policies, processes and procedures are effectively implemented. As a quality leader within Element you will be capable of driving a culture of quality assurance and quality improvement, working closely with your operational colleagues and the wider Element quality community.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Ensuring all staff buy-in to the effective and efficient implementation of Element quality policies and procedure by providing advice, guidance and support on quality issues to Element Singapore and Malaysia business units.
• Driving quality improvements at every opportunity and proactive participation in continuous improvement and process improvement projects and ensure effective adoption of Element e-QMS throughout Element Singapore and Malaysia business units.
• Proactive participation in projects to deliver identified Quality objectives and contribute to and drive key initiatives to improve Quality awareness and compliance.
• Management of and participation in scheduled internal audits across management system and technical disciplines and proactively monitoring laboratory test equipment for calibration currency and advising management of upcoming schedules,ensuring corrective and preventive actions identified within specific laboratories are implemented and verified in a timely manner.
• Represent Element Singapore and Malaysia business units during assessments by accreditation bodies and audits by clients and controlled document holding and arrange to update appropriate documentation as necessary, control and issue of Element Singapore and Malaysia Quality Management Systems documentation and participate in the internal audit programme to monitor implementation of quality policies and procedures.
• Manage external and internal proficiency testing programs of all Element Singapore and Malaysia business units and prepare compliance and improvement metrics for Element Singapore and Malaysia business units quality as required.
• Writing and reviewing quality documentation as required and effective and efficient management of personal work schedules and timely generation of Element Singapore and Malaysia business units quality reports.

Job Requirements:

• Minimum Bachelor of Science or Engineering qualification.
• Proven experience (minimum two years) of managing quality management systems within a multi-discipline testing, inspection and certification environment, preferably multi-location.
• Demonstrable experience auditing against ISO/IEC 17025, ISO/IEC 17020 and ISO/IEC 17065.
• Sound knowledge of equipment calibration and analysing proficiency test data.
• Knowledgeable in uncertainty of measurement and risk assessment and hands-on experience with Element e-QMS preferable.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Responsibilities:

·Driving Root Cause analysis in problem diagnosis from customer anomaly to ensure problem prevention and resolution implementation ensuring effectiveness

·Management of Change communication to customer for approval to implementation

·Develop, implement, and improve the department and product total quality system to assure product specification is met

·Facilitate and work with team members on quality improvement to the product by providing technical guidance in QE tools applications

·Perform quality system or process audit to assure quality systems are in place

·Support the viper manufacturing in ensuring product meets the established standards of quality including reliability, usability and performance required

·Establish & Implement manufacturing quality metrics and lead team on to achieve the goal and continuous improvement

·Meet Plant/Department cost & quality objectives

·Implement lessons learned across manufacturing and also new products development projects

·Perform special projects to support continuous improvement on an ongoing basis thru functional standardization and implement process improvement ideas in primary work area.

·To adhere to the Health & Safety regulations as set out by the EHS Department and any other Government regulations

EDUCATION AND EXPERIENCE (Minimum Qualifications)

Degree in Electronics Engineering

5 years of experience in a Quality/Engineering in Product Design Engineering/Manufacturing environment preferred

SKILLS

Analytical problem-solving skills

Proficient oral and written communication/presentation skills

Basic print reading and interpretation of specification skills

Good knowledge of FMEA, Control Plan

Advanced statistical experience with quality tools usage and Product Design Development Cycle is preferred

Certified Design for Six Sigma/Six Sigma Black Belt/Reliability Engineer will have an added advantage

*Disclaimer statement:
Career Scam Disclaimer: BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website. To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. Applicants should never provide their Social Security numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. Job applicants are invited to contact BorgWarner through BorgWarner’s website to verify the authenticity of any employment opportunities

• Ensure all quality control documentation is compiled and completed for as-built handover through the QC turnover engineer
• Review and prepare reports on Authority inspections (RI inspection, BCA TOP inspection, etc)
• Establish Project Quality System, implement and maintain in accordance with Singapore standards application to BCA for CONQUAS Assessment and provide a framework to achieve the score
• Assess the implementation of the Quality Plan and Quality Control Plans on site
• Ensure the project QA/QC plan follows specifications and contract requirements
• Compete for site quality control instructions and action remedial responses
• Coordinate quality inspections with all the site subcontractors and vendors and coordinate all non-destructive testing on site
• Distribute relevant QA/QC documentation to site subcontractors
• Verify the quality-related site activities are in accordance with the applicable codes and standards
• Participate in the site's internal and external site audits
• Coordinate all the quality site inspections through the site QC inspectors
• Control all nonconformance reports and undertake remedial action
• Must have fluent English communication skills to liaise with the Client’s staff
• Have Main Contractor Experience

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

This position is responsible for conducting audit checks to ensure that products meet the established standards, This role also supports the achievement of Company quality target.

1. Confirm to quality standard and quality processes

• Inspect in-coming and outgoing products according to policies standard.
• Perform all product processes within section (eg, QC,SAO), Reworks, Repairs, Defective photo-taking

2. Contribute to continuous improvement

• Maintain Integrity accuracy and completeness of Supplier invoice data and QC data in system
• Establish standard operating procedures and conditions for handling storage and checklist of stock.

3. Perform other ad-hoc duties as assigned.

Requirements

• At least 1 year of experience in Gold quality control in retail jewellery preferred
• If no QC experience in retail jewellery then at least 1 year of experience in QC control in manufacturing
• At least Diploma in any discipline
• Basic understanding of production methods.
• Attention to detail
• Able to use basic MS Office.
• Good Communication and Interpersonal Skills
• Able to multi-task and quick learner

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To manage QC equipment life cycle from qualification to decommissioning including calibration and maintenance plan follow up

Key Responsibilities:

• Technical responsibilities
• Manage new QC equipment qualification as per change control and validation processes (i.e. URS, System classification, Audit trail review assessment, DQ/IQ/OQ, PPC09)
• Be author of SOPs/ protocols/ reports/ training materials
• Manage decomissioning of QC equipment and follow disposal
• process
• Maintain our QC asset listing up to date Follow QC equipment routine lifecycle
• Coordination of calibration and maintenance plan with user and external vendor/TS team
• Coordination of equipment troubleshooting if occurence of failure/breakdow (i.e. Tag in/out equipment, Work order creation)
• Sample transfer, alarm management and cleaning for fridges, freezers and incubators
• Liaise with external vendor for service quotation, escort vendor during service and approve invoice timely
• Supports compliance activities:
• Performs regular Ll audits in QC
• Coordinates and supports all L2, L3 and L4 audits and the associated CAPAs
• Lead and manage continuous improvement projects Subject-matter-expert (SME)/ audit fronter for assigned topics
• Manage ad-hoc tasks
• Organization and Management Responsibilities
• Creates strong team morale and a culture of accountability and ownership
• Provides leadership, guidance and technical expertise/support to the juniors
• Ensures continuous improvements of the QC operations
• Ensures expenditures are within budget
• Decision Making
• Proposals & Recommendations
• Based on experience & knowledge of work
• Proposal of CAPA for any issues/ deviations/ exceptions/ risks
• Proposal of QC improvement projects and strategies
• Team training and development

Skills:

Professional

• For Specialist - University Degree in a relevant Science discipline with at least 2 years of working experience or Diploma with at least 5 years of working experience
• For Senior Specialist - University Degree in a relevant Science discipline with at least 4 years of working experience or Diploma with at least 8 years of working experience

Technical

• Competent technical skills in project management
• Computer system validation Knowledge of cGLP & cGMP

Business

• Effective report writing skills
• Planning and Organizing skills
• Good interpersonal and communication skills
• Effective team player
• Analytical skills with logical thinking Problem solving skills

Competencies:

• Effective report writing skills
• Planning and organization skills
• Able to work independently
• Team player
• Analytical skills with logical thinking
• Leadership skills (advantage)
  ​​

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Purpose:

• To perform testing and support related activities in QC Biological team

Key Responsibilities:

• Perform routine and adhoc/ non-routine testing in the following areas with good observation of GMP requirements:
• Biological testings for raw materials release (All QA controlled materials). Biological testings refer to biochemistry and/ or microbiological testings.
• Biological testings for intermediates and product
• Biological testings for utilities (city water, purified water, water of injection, compressed gases, etc)
• Biological testings required to support manufacturing process validations and confirmations
• Perform routine environmental sampling in controlled environmental areas
• Initiate and participate in laboratory investigation (OOS / deviations / atypical results / invalid results) and assist in timely closure of the investigation and CAPA
• Perform equipment calibration, maintenance and validation
• Participate in method transfer / verification / validation
• Participate in peer review for verification of task and data
• Assist in SOP writing
• Identify and report problems in QC to QC Superintendent in a timely manner
• Practice 6S and ensure good housekeeping of laboratory, work area and equipment
• Ensure good inventory of QC materials (purchased and prepared materials / glassware) to support testings; ensure no over surplus of inventory
• Ensure wastes are disposed appropriately and promptly
• Adheres to all safety and security policies and practices
• Assist the Senior Superintendent/Superintendent in the management and operations of the team; may be indirectly responsible for a team of associates:
• Scheduling day-to-day shopfloor activities and resources handling to ensure timely availability of test results
• Reviews test reports to ensure accuracy of test results in accordance with corporate, regulatory and external agency regulations.
• Provides training to the team.
• Provides guidance, support and technical expertise to the team.
• Involves in investigation and protocol writing (when required)
• Involves in SOP writing and updating
• Organization and Problem Solving:
• Creates strong team morale and a culture of accountability and ownership
• Recommends and coordinates appropriate corrective actions to quality problems in conjunction with other teams/ departments
• Presents in timely manner major issues to the management with strategies on their resolution.

Skills:

Professional

• For QC Associate, fresh graduate in NITEC/ Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry
• For Senior QC Associate, NITEC/Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry, with at least 2 years of working experiences or Fresh degree holder in Microbiology Biotechnology, Life Sciences, Chemistry, Biochemistry. Increased number of years of experiences are required for higher positions.
• For Lead QC Associate, NITEC/Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry, with at least 8 years of working experiences or Degree holder in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry with at least 4 years of working experiences.

Technical

• Competent technical skills in the following:
• Good laboratory knowledge and hands-on experience in chemistry testings o Laboratory equipment qualification
• (advantage)
• Knowledge of cGLP & cGMP (advantage)

Business

• Effective report writing skills
• Planning and Organizing skills
• Effective team player
• Analytical skills with logical thinking
• Good interpersonal skills
• Leadership skills (advantage)

Competencies:

• Good command of English
• Good knowledge on usage of computers

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

KEY DUTIES AND RESPONSIBILITES:

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.

1. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
2. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
3. Ensure readiness of QC Laboratory in internal / external audits.
4. Maintain data integrity in Quality Control activities and ensure appropriate traceability.

6. Initiate change control documents.

1. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
2. Participate in New Product Introduction activities.

9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.

1. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
2. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
3. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
4. Escalate the quality events, trends as appropriate to QC Head.
5. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
6. Serve as subject matter expert on laboratory instrumentation and compliance issues.
7. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
8. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
9. Maintains a safe laboratory environment by implementing recommendations made by EHS.
10. Initiate CAPEX for equipment purchases.

20. Support in budget preparation for QC Laboratory.

21. Any other activities as and when assigned by the Superior.

JOB REQUIREMENTS:

· EDUCATION: Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

· EXPERIENCE: Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

• Possess working knowledge of GMP in the pharmaceutical industry.
• Excellent interpersonal and analytical skills, good verbal, and written communication skills.
• Working knowledge of qualification, calibration, and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• Working knowledge of method development, validation, verification of analytical method.
• Familiarity of 21 CFR Part 11 requirements.

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

· Drive Technical and Maintenance support to all operating facilities in instrumentation and control systems, including ICSS / DCS / PLC

· Ensure the installations are maintained and managed with respect to regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore facilities in terms of Instrumentation and Control Systems

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Participate in planned shutdown as and when required

· Review and provide the engineering solutions for Management of Change Request from Facilities as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide in-house training for the offshore team as and when required

· Carry out competency evaluation for onboard E&I Supervisors and Instrument technicians as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating facilities

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required