• Plan, implement and monitor the work schedules according to the master and detailed work programs
• Assist in the planning and sequencing of the construction to the master and detailed work programs
• Liaise with customer's site representatives and subcontractors
• Check construction drawings for accuracy and completeness for construction
• Conduct inspections and check on works
• Co-ordinate the handing over of completed works to the customer and completion of the necessary rectification works
• Degree in Civil Engineering recognized by Singapore PE Board

Contact us through email: [email protected], WhatsApp: 8835 9908

Job Description

• To assist engineering supervisor in the review of project orders relevant specification and/or data sheets
• Act as secondary check and make recommendation based on common industrial engineering practice, where necessary
• To aid supervisor in providing and implementing cost effective and best engineering solutions for project in order to stay competitive
• To support sales, project and production team on various aspects of technical/engineering matters
• To prepare and maintain accurate engineering documents, i.e. general assembly drawing with BOM, control schematic drawing, test procedure, data sheet and engineering library
• Manage engineering change function and ensure engineering documents are updated accordingly
• To support and assist engineering supervisor in providing sound engineering practice and engineering calculation where applicable in a timely manner top meet project timeline
• Providing field support for the customers to resolve after sales / any technical issues
• Travel along with Technicians to installation base and sites if situation arises
• To act as the main administrator and to maintain the SAP item master data
• To assist engineering supervisor and manager to drive the department’s improvement programs and/or process efficiency initiatives
• Perform additional related duties as requested or required

Job Requirement

• Bachelor degree / Diploma in Mechanical/Instrumentation or equivalent
• 1-2 years experience in either marine, oil & gas or automation industry is preferred
• Possess knowledge in instrumentation and control system
• Conversant with all industrial standards related to valve automation
• Able to read and interpret drawings, specifications and technical documents
• Knowledge of Autocad 2D/3D or drafting software and SAP will be an advantage
• Strong verbal and written communication skills
• Fresh graduates are welcome to apply for this entry level position

Job Summary

We are seeking a highly skilled Devops Engineer (GCP) to join our team for scalability while ensuring the seamless functioning of our production environments. This is an opportunity to work in a fast-paced, dynamic environment and make a significant impact.

Mandatory Skill-set

• Has 2+ years of experience in cloud computing, specifically with GCP;
• Proven experience in cloud infrastructure design, cloud migStrong understanding of GCP services like Compute Engine, App Engine, Kubernetes Engine, Cloud Functions, Cloud Storage, BigQuery, etc;
• Proficiency in programming languages such as Java, Python, or C++ for application development and scripting;
• Familiarity with DevOps tools and practices, including CI/CD pipelines and container orchestration tools (e.g., Kubernetes).ration, and application development on Google Cloud PlatfStrong analytical and problem-solving skills with the ability to identify issues and provide effective solutions;
• Ability to troubleshoot and resolve cloud infrastructure and application performance issues;
• Experience working within Agile development teams and using version control systems like Git for collaboration;
• Knowledge of Agile methodologies such as Scrum or Kanban;
• Strong communication and interpersonal skills to work effectively with both technical and non-technical teams;
• Ability to explain complex technical concepts to non-technical stakeholders;
• Detail-oriented, with excellent time management and organizational skills.

Desired Skill-set

• Google Cloud Certified – Professional Cloud Developer or Cloud Architect;
• Experience working with containerized applications and Kubernetes;
• Knowledge of cloud security best practices and implementation, including IAM, encryption, and networking security;
• Understanding of compliance frameworks (e.g., GDPR, HIPAA, PCI-DSS) and the ability to implement these within the cloud environment.

Responsibilities

• Design and implement scalable, secure, and efficient cloud systems on Google Cloud Platform (GCP);
• Manage and optimize cloud infrastructure to meet the needs of the business while ensuring high performance, reliability, and availability;
• Develop and deploy cloud-native applications using GCP services such as Compute Engine, App Engine, Kubernetes Engine, Cloud Functions, and Cloud Storage;
• that applications are designed with scalability, resilience, and cost-effectiveness in mind;
• Plan and execute the migration of on-premises systems to GCP, ensuring minimal downtime and a seamless transition;
• Optimize resources during the migration process to achieve efficiency and cost savings;
• Implement security measures, including Identity and Access Management (IAM), firewalls, and encryption protocols to ensure data protection;
• Ensure that GCP deployments comply with internal policies, industry standards, and regulatory requirements (e.g., GDPR, HIPAA);
• Work closely with product teams, business units, and other stakeholders to gather requirements and provide cloud-based technical solutions;
• Collaborate on the design and development of new cloud-based applications or services to meet business objectives;
• Continuously monitor cloud infrastructure and applications using tools like GCP Cloud Monitoring, Stackdriver, and Cloud Logging to ensure optimal performance;
• Identify areas for improvement in terms of resource utilization, cost management, and system reliability;
• Stay up-to-date with the latest developments in GCP services, tools, and best practices;
• Drive continuous improvement in cloud architectures, application performance, and cloud deployment methodologies.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE's website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Job Description

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• To report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timelycompletion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must havethe strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurancesystem.
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• To manage the site supervisors with respect to C&S engineering works, architectural and MandE engineering works.
• To attend site, progress, variation and coordination meetings Interpret drawings and contract documents on works to be carried.

Job Requirement

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore.
• Accredited with IES/ACES with a valid Resident Engineer Practicing.
• Minimum 8 years’ experience preferably in steel and precast building construction.
• Must be familiar with local Regulations/Codes for Civil and Structural related to building projects.
• Must have experience in condominium project.
• A good team player and experience in leading a team of Resident Technical Officers.
• Carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• Supervision of C&S and Architecture works by identifying any non-conformity of contractor’s works on site.
• Strong ability to interpret the drawings and contract documents on works to be carried.
• Supervision and manage site supervisors with respect to C&S and Architecture Work.
• Ability to resolve site and technical issues, prepare and document detailed site progress reports.

Must Have Diploma In Mechanical Engineering with 15 Years Experience in Steel Structure Fabrication and Erection, Mechnical Equipment Erection Rotarty and static Equipment Erection.Piping Fabrication and Erection, Includes Hydotest and Precom works in Process and Power Plant.

Autocad software is must.

Familiari with Lifting Plan Preparation.

Preparation in Project Schduele and control.

Preparation of MSRA.

Must Report to site at 7 am and conitue to stay up to last person leave site.

Must be safe work oriented person

JOB RESPONSIBILITIES:

• Assist the Project Manager in developing and managing project schedules, budgets and resources.
• Coordinate with architects and contractors to ensure project success.
• Review project plans, specifications, and contracts.
• Ensure compliance with building codes, safety regulations, and environmental requirements.
• Monitor project progress and make adjustment as necessary
• Communicate project status to Project Manager
• Manage project risks and identify opportunities for improvement
• Provide technical support to project team members
• Ensure quality control and quality assurance for all project deliverables
• Attend project meetings and facilitate communication among team members.
• Any other ad-hoc projects assigned from time to time

QUALIFICATION:

• Diploma or Degree in Electrical Engineering

WORKING EXPERIENCE:

• For Diploma holder, more than 3 years’ experience in handling project management.
• For Degree holder, 1-2 years similar experience
• Computer literacy in Microsoft Office
• Strong knowledge of construction materials, methods, and regulations
• Experience in managing and supervising construction teams
• Strong problem-solving and decision-making skills

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Job Description & Requirements

Degree/ diploma in Civil Engineering/ Building Steel Structures and/or

related experience prefered

Liaise and coordinate with consultants, main contractor

Resolve all engineering, technical and project queries from time to time

Any other ad-hoc duties assigned related to project

Responsibilities:

• Design, develop, and implement electrical systems and solutions for various projects.
• Conduct electrical testing, analysis, and troubleshooting to ensure system reliability.
• Prepare detailed electrical drawings, schematics, and specifications.
• Collaborate with cross-functional teams to integrate electrical systems with other engineering disciplines.
• Ensure compliance with safety regulations and industry standards.
• Provide technical support and guidance during the installation and maintenance phases.
• Participate in project planning and development stages, including cost estimation and resource management.

Requirements:

Educational Qualifications:

- Diploma or Degree in Electrical Engineering, Electronics Engineering, or a related field.
- Relevant certifications (e.g., Professional Engineer License) will be an advantage.

Experience:

- Minimum of 3 years of hands-on experience in electrical engineering or related industry
- Experience with electrical design, system analysis, and project execution.

Technical Skills:

- Proficiency in electrical design software such as AutoCAD, Revit, ETAP, or similar tools.
- Strong understanding of electrical circuits, systems, and components.
- Familiarity with industry standards and safety regulations (e.g., NEC, IEC, etc.).
- Knowledge of power distribution, control systems, and automation.

Problem-Solving & Analytical Abilities:

- Strong troubleshooting skills and the ability to solve complex electrical issues.
- Ability to conduct detailed analysis and testing of electrical systems.

Soft Skills:

- Excellent communication and interpersonal skills.
- Strong team player with the ability to work independently when required.
- Good project management and organizational skills.

Certifications & Licenses
- Safety training or certifications related to electrical work

TME Systems Pte Ltd is a sales and engineering company operating in ASEAN. We are excited to announce an opportunity for a full-time Software Engineer to join our team as part of our business growth.

We are looking for a dedicated professional to support the technical aspects of our Software Business Unit and assist our custmers in achieving positive business outcomes.

As a Software Engineer, ou will collaborate with the Software BU team to support pre-sales and post-sales activities towards the primary objectives of driving business success.

Responsibilities

• Provide technical support and training for TME Software-based solution;
• Collaborate with customers to understand their workflows and develop effective solution proposals;
• Create application example demonstrations tailored to customer needs;
• Work with sales teams to support and develop account strategies;
• Travel as needed to support on-site customer technical meetings, workshops, and presentations;
• Stay updated with the latest software solution releases and industry developments.

Requirements

Technical Skills:

• In-depth knowledge of either Modeling & Simulation or Real-time Operating Systems;
• Strong background in engineering or computer science;
• Proficiency in programming languages such as C/C++/C#, Python, or similar;
• Ability to understand and address customer technical requirements;
• Experience in developing and delivering technical demonstrations on the use of software technologies in system program design;
• A passion for learning new software technologies is advantageous.

Soft Skills:

• Excellent communication and presentation abilities;
• Strong problem-solving and analytical thinking skills;
• Attention to detail;
• Strong interpersonal skills and a customer-focussed approach for building lasting relationships;
• Ability to work both independently and collaboratively;
• Flexibility to manage multiple projects and multitask effectively;
• Willingness to travel and adapt to different cultural environments;
• Please state your expected salary.

Key Deliverables:

• Engage customers and prospects in seminars, combined calls or meetings, and through supporting evaluations to develop a shared vision for success;
• Successfully execute technical product demonstrations and presentations;
• Ability to turn customer needs into actionable plans;
• Maintain high levels of customer satisfaction and retention;
• Effectively collaborate with internal teams to deliver exceptional customer experiences.

Responsibilities:

• Attend site meetings
• Supervise the construction of works in accordance with the project plan
• Co-ordinate layout plan, detailed drawings and M&E plan and prepare time schedule
• Arrange submission of plans to local authorities for approval and arrange inspections of work to kick off projects
• Work closely with customers; co-ordinate with internal staff; manage sub-contractors; determine material type and quantities
• Work closely with operations manager to manage project profit margin by carrying out price comparisons and managing operating costs
• Supervise, control and coordinate work according to project plan to ensure timely completion and high quality work.
• Conduct frequent sites inspections and meetings to ensure high quality work by sub-contractors and on time delivery of materials in accordance with schedule
• Enforce site safety procedures, identify and manage risks arising from the workplace or work process

Requirements:

• Degree /Diploma (or equivalent) in Mechanical / Electrical engineering
• Minimum 3 years experience in building services
• Proficiency in written and spoken English
• Excellent interpersonal skills with keen attention to details
• Self-motivated with a high degree of personal responsibility
• Able to handle projects independently and communicate well

· To identify project : Active participation and identification of prospective project through regular contacts with customer (face to customer)

· To liaise with allocated customer for sales acquisition

· To review customer requirements and prepare offers to allocated customer and follow-up offers with customer and keep updated project information

· To finalise and negotiate on contract with customers

· To commit and achieve the order intake budget

· To prepare project schedules

· To maintain existing account and help expand sales network

· Good contact with M&E Contractors & Consultant

Work Location : East
Work Day : Monday to Friday (8.30am to 5.30pm)

Responsibilities:

• To work with all internal departments & suppliers to create a friendly & ensure quality awareness environment so as to achieve zero defect products

• To lead & work with MRB team on the OSV activities so as to meet supplier's requests before any RMA / RTV process

• To understand customer manufacturing quality requirements & align with the business agreement so as to work effectively with suppliers on the line rejection

• Work closely with suppliers to expedite on-the-line defective returns, and follow-up on the disposition & FA report so as to work back with the internal relevant departments. Eg : SCM, Quality, Process and etc.

• Maintain zero defective quality on hand & aging period

• Support parts localization and work closely with factory RD & engineering team

• Compliance with RBA

Requirements:-

• Degree / Diploma in quality/engineering

• Ability to work with the customer, HQ / factory, Peers / Subordinate, and Superiors

• SAP knowledge

• Able to multi-task & work under pressure

• Able to handle customer complaints and work well with internal & external departments to resolve the quality issues

• Able to provide constructive solutions/advice to the team

• Participate in con-call outside office hours if required

Compliance with RBA standard

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938 (Tan Jie Bei)

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

• Well Established Company
• Basic $ 4000 - $ 5000 + Transport Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Joo Koon
• Working hours : 8.30am – 5.30pm
• Working days : Monday to Friday

Job Responsibilities:

• Technical review on new project orders and order assignments to technical engineer & drafter team
• To manage and ensure timely submission of engineering documents i.e. Control Schematic Drawing, General Assembly Drawing, Wiring Diagram, Nameplate Drawing, Test Procedure, Data Sheet and etc
• To review all project engineering documents prepared by technical engineer & drafter team before submitting to client
• Manage engineering change function and ensure engineering documents are updated accordingly
• Provide advice and guidance to technical engineer & drafter team for any technical queries and To support other ops team on various aspects of technical/engineering matters
• To check and make recommendations based on common industrial engineering practice, where necessary
• To provide and implement cost effective and best engineering solutions for project in order to stay competitive
• To provide sound engineering practice and engineering calculation where applicable in a timely manner to meet project timeline
• To review international standards and/or project specifications for product compliance. i.e. ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation
• Providing field support for the customers to resolve after-sales technical issues or technical clarifications
• To attend internal/external kick off Meeting (KOM) when required
• Travel along with Technicians to installation base and sites if situation arise
• To assist manager to lead the department’s improvement programs and/or process efficiency initiatives
• To assist manager in maintaining and updating the department's Standard Operating Procedure
• To carry out Engineering Personnel annual Performance review to ensure competency and give counselling when required
• Support new employee orientation by providing brief Engineering department process flow training
• Support and Guide the Operation department in resolving aftermarket technical issues such as Product Design changes / Fault Finding / Supplier Discrepancies
• Performs additional related duties as requested or required

Requirements:

• Bachelor’s Degree / Diploma in Mechanical/Instrumentation or equivalent
• Minimum 6 to 8 years supervisory experience in Valve Automation and/or instrumentation background, preferably in the Valves & Actuators field for Oil & Gas Market
• Conversant with ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation
• Possess a strong knowledge in Pneumatic and Hydraulic circuits

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

CPPS group is seeking a highly motivated, independent and creative research engineer to deliver impactful and innovative AI-based digital technologies for predictive/prescriptive analytics and decision support. The candidate will work with a multidisciplinary team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI.

The key roles & responsibilities include, but are not limited to the following:

• Co-develop AI models to enhance and automate decision making
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Engage companies to understand their challenges and translate to research collaborations in AI
• Contribute to research and development in Cyber-Physical Production System technologies, including technology development, live production environment test-bedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Mechanical Engineering, or a related field
• Candidates with an ambition and attitude for cutting-edge research are welcome to apply
• Strong understanding of machine learning algorithms, statistical analysis, and data preprocessing techniques
• Experience with machine learning frameworks and libraries, such as TensorFlow, Keras, PyTorch, or Scikit-learn
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

• Well Established Company
• Basic $3800 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Work with both R&D and Operation Managers to kick off improvement projects that aims at cost reduction, yield improvement, Human Resource Management (work along with HR), etc.
• Implement Lean manufacturing principles and best practices to drive process improvements across all production lines
• Develop Production standard procedure or Work Instructions and align these documents with quality management systems requirements
• Prepare and conduct training for Operation teams to ensure up-to-date compliances are practiced consistently
• Identify opportunities for process optimization and implement strategies to improve productivity and efficiency
• Collaborate with the R&D team to introduce new technologies and innovations to our manufacturing process
• Report monthly CI & other assigned KPI performance
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s Degree in Mechanical/Industrial Engineering, with minimum 1 year working experience in manufacturing environment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

As a (Senior) Research Engineer in our Robotics & Automation R&D team, you will play a role in conceptualizing, designing, and implementing intelligent robotics solutions that solve challenges across various industries. Leveraging your expertise in robotics, computer vision, AI, and ROS, etc., you will contribute to the development of next-generation robotic platforms that exhibit advanced perception, cognition, and decision-making capabilities. As we continue to expand our horizons, we are seeking a talented Research Engineer to join our dynamic team.

Responsibilities:

• Algorithm Development: Design and implement algorithms for robot perception, 2D/3D scene understanding, localization and planning to improve the intelligence of robot for addressing the real-world tasks.
• AI and Learning: Develop, integrate, and deploy advance AI models for various robot tasks such as 2D/3D detection, self-learning, to enhance autonomy for robot tasks such as pick and place, assembly, etc.
• Robot Planning and Control: Develop robot motion/trajectory planning and control solution using tools such as ROS1/ROS2, MoveIt, Nvidia Issac, etc for robot simulation and control.
• Prototype Development: Build and iterate on prototypes to validate algorithms and concepts in real-world robotic applications, ensuring robustness and scalability.

Job Requirements

• Bachelor’s or Master’s degree holder in Engineering, Robotics, Automation, Computer or related fields.
• Strong programming skills in languages such as Python, C++, and familiarity with software development best practices.
• Experience in deep learning frameworks (e.g., TensorFlow, PyTorch) and experience with Robot Operation System (ROS).
• Enthusiasm for learning and adapting to new technologies and areas, with a proactive approach to skill development.

Job Description:

CPPS group is seeking a highly motivated, independent and creative research engineer to deliver impactful and innovative AI-based digital technologies for predictive/prescriptive analytics and decision support. The candidate will work with a multidisciplinary team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI.

The key roles & responsibilities include, but are not limited to the following:

• Co-develop AI models to enhance and automate decision making
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Engage companies to understand their challenges and translate to research collaborations in AI
• Contribute to research and development in Cyber-Physical Production System technologies, including technology development, live production environment test-bedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Mechanical Engineering, or a related field.
• Candidates with an ambition and attitude for cutting-edge research are welcome to apply.
• Strong understanding of machine learning algorithms, statistical analysis, and data preprocessing techniques
• Experience with machine learning frameworks and libraries, such as TensorFlow, Keras, PyTorch, or Scikit-learn
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description:

The CPPS group is seeking a highly motivated senior research engineer or lead research engineer to lead and conduct R&D in Industry 5.0 smart manufacturing solutions and integrating digital technologies with AI-enabled physical production systems that promote human-centricity, environmental sustainability, and value chain resilience in manufacturing. The ideal candidate should have a strong background in controls, integration and PLC programming. The key roles & responsibilities include, but are not limited to the following:

• Conduct R&D in novel adaptive and autonomous control algorithms for scalable self-learning, self-optimizing and self-recovery production systems
• Work with a team of engineers and scientist to design and implement integrated IIOT and AI-enabled production systems for smart manufacturing
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with industry communication protocols such as OPC-UA, MQTT, Profibus, and RS-232 is an advantage

Job Requirement:

• Masters or Bachelor degree in Computer Science / Engineering, Electrical Engineering, Mechanical Engineering, with emphasis on controls, integration and automation
• 1-3 years experience in industry and/or R&D projects in the area of controls and IIOT (min. 5 years for Lead Research Engineer).
• Develop and program PLCs and other control systems, utilizing platforms like TwinCAT, EcoStruxure, Codesys and others.
• Ability to apprehend and/or interpret electrical circuit diagrams is a strong advantage
• Excellent technical presentation and writing skills
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description:

CPPS group is seeking a highly motivated, independent and creative research engineer to deliver impactful and innovative AI-based digital technologies for predictive/prescriptive analytics and decision support. The candidate will work with a multidisciplinary team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI.

The key roles & responsibilities include, but are not limited to the following:

• Co-develop AI models to enhance and automate decision making
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Engage companies to understand their challenges and translate to research collaborations in AI
• Contribute to research and development in Cyber-Physical Production System technologies, including technology development, live production environment test-bedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Mechanical Engineering, or a related field
• Candidates with an ambition and attitude for cutting-edge research are welcome to apply
• Strong understanding of machine learning algorithms, statistical analysis, and data preprocessing techniques
• Experience with machine learning frameworks and libraries, such as TensorFlow, Keras, PyTorch, or Scikit-learn
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Marine Service Engineer

Office location : Boon Lay
Working Location: On board ship

Working days : 5 days (Mon- Friday)

Working hours : 8am - 5pm

Salary : $2,000-$2,800 basic + OT + Allowances (Gross Salary $3,000 - $4,000)

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job Description

• Conduct periodic inspections, repair, service and maintenance of marine equipment to ensure reliable
  operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.
  
  Requirements:
• Diploma in Engineering or equivalent (Electrical/Electronics/Mechanical/Mechatronics).

Responsibilities:

• Developing and optimizing processes, including production flow, assembly methods, and equipment
• Ensuring efficient and profitable manufacturing processes
• Carrying out risk assessments of all equipment and processes
• Writing reports based on data collected and presenting findings to higher-ups
• Coordinating manufacturing launch of new or revised products
• Help with change control, test script writing

Requirements:

• Min Degree in related study
• 1-2years experience in Pharma engineering

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected]

Esther Lim Suk Hui

EA Personnel No: R18728082

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

• Well Establish Company
• Basic $ 3,500- $5,000 + Allowances + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tagore
• Working hours: 8.30am to 5.30pm (Monday to Friday)

Key Responsibilities:

• Lead generation role and be responsible for conducting market research, developing solutions, prospecting, and expanding referral networks to seek out potential clients
• Coordinate Sales Efforts to Support Growth and Achieve Sales Targets
• Maintain High Quality Customer Service by ensure responsive services with follow ups, build strong relationships clients
• Respond to complaints from clients and give after-sales support on a timely basis
• Provide technical support and advice for clients
• Other ad hoc duties as assigned

Requirements:

• At least 2 years of sales experience in the engineering or technical industry (e.g. Oil and Gas, Petrochemical, Pharmaceutical, Marine)
• Experience in Valve & Actuators will be a bonus

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)
EA Recruitment Pte Ltd
EA License No: 21C0492

Job Description:

The CPPS group is seeking a highly motivated senior research engineer or lead research engineer to lead and conduct R&D in Industry 5.0 smart manufacturing solutions and integrating digital technologies with AI-enabled physical production systems that promote human-centricity, environmental sustainability, and value chain resilience in manufacturing. The ideal candidate should have a strong background in controls, integration and PLC programming. The key roles & responsibilities include, but are not limited to the following:

• Conduct R&D in novel adaptive and autonomous control algorithms for scalable self-learning, self-optimizing and self-recovery production systems
• Work with a team of engineers and scientist to design and implement integrated IIOT and AI-enabled production systems for smart manufacturing
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with industry communication protocols such as OPC-UA, MQTT, Profibus, and RS-232 is an advantage

Job Requirement:

• Masters or Bachelor degree in Computer Science / Engineering, Electrical Engineering, Mechanical Engineering, with emphasis on controls, integration and automation
• 1-3 years experience in industry and/or R&D projects in the area of controls and IIOT (min. 5 years for Lead Research Engineer).
• Develop and program PLCs and other control systems, utilizing platforms like TwinCAT, EcoStruxure, Codesys and others.
• Ability to apprehend and/or interpret electrical circuit diagrams is a strong advantage
• Excellent technical presentation and writing skills
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

• Project Engineer (Marine Industry)
• 5 days Mondays to Fridays: 8:30am to 6pm
• $6500 – $8500
• Pandan Road Singapore (Clementi)
• Transport: We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and also a return company bus trip back to Clementi in the evening.
  

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities:

• Report to the Project Director / Manager in charge of the WTW system.
• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Requirements:

• Min Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Added advantage with specific experience in WTW system (Offshore Passenger Transfer System).
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software an added advantage.
• Good understanding of Document Control. Added advantage with knowledge of ISO9001:2015 QAM system