• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

• Possess knowledge in GMP and halal certification processes
• Assist in GMP preparation for audit
• Assist QC manager in daily operations
• Testing of finished products against specifications and to notify for any out of specifications
• Maintenance of manufacturing facility as per GMP requirements
• Prepare products for testing from external laboratories
• Conduct instrument analysis and calibration of laboratory equipment and basic equipment maintenance
• Assist in generation of Certificate of Analysis
• Conduct incoming materials check

Requirements

• Minimum Diploma in Chemistry or relevant courses
• Minimum 2 years of experience
• Able to work independently with minimal supervision
• Able to write and communicate in English
• Knowledge in Excel and word
• Knowledge in SAP will be an added advantage

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Scope

• Project management: analytical, raw material and microbiological method introduction and analytical equipment qualification
• Assist in regulatory filing and method launch
• Helping out in invalid results tracking, trending and investigation
• Conducting unexpected results investigation
• Control trend establishment and investigations
• Reference standard and reagent qualifications
• Conducting compendia review
• Assisting in audit preparation and involvement and other tasks as assigned.

Job Requirements

• A minimum experience of 3-5 years in Pharmaceutical, Biopharmaceutical or related manufacturing environment.
• Six Sigma Greenbelt training would be helpful.
• Demonstrated experience e.g. in the area of method validation, method transfer, method verification.
• Demonstrated ability to collaborate with cross functional or cross sites to achieve objectives.

For interested candidates, please send your updated resume:

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

This position is responsible for conducting audit checks to ensure that products meet the established standards, This role also supports the achievement of Company quality target.

1. Confirm to quality standard and quality processes

• Inspect in-coming and outgoing products according to policies standard.
• Perform all product processes within section (eg, QC,SAO), Reworks, Repairs, Defective photo-taking

2. Contribute to continuous improvement

• Maintain Integrity accuracy and completeness of Supplier invoice data and QC data in system
• Establish standard operating procedures and conditions for handling storage and checklist of stock.

3. Perform other ad-hoc duties as assigned.

Requirements

• At least 1 year of experience in Gold quality control in retail jewellery preferred
• If no QC experience in retail jewellery then at least 1 year of experience in QC control in manufacturing
• At least Diploma in any discipline
• Basic understanding of production methods.
• Attention to detail
• Able to use basic MS Office.
• Good Communication and Interpersonal Skills
• Able to multi-task and quick learner

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Purpose:

• To perform testing and support related activities in QC Biological team

Key Responsibilities:

• Perform routine and adhoc/ non-routine testing in the following areas with good observation of GMP requirements:
• Biological testings for raw materials release (All QA controlled materials). Biological testings refer to biochemistry and/ or microbiological testings.
• Biological testings for intermediates and product
• Biological testings for utilities (city water, purified water, water of injection, compressed gases, etc)
• Biological testings required to support manufacturing process validations and confirmations
• Perform routine environmental sampling in controlled environmental areas
• Initiate and participate in laboratory investigation (OOS / deviations / atypical results / invalid results) and assist in timely closure of the investigation and CAPA
• Perform equipment calibration, maintenance and validation
• Participate in method transfer / verification / validation
• Participate in peer review for verification of task and data
• Assist in SOP writing
• Identify and report problems in QC to QC Superintendent in a timely manner
• Practice 6S and ensure good housekeeping of laboratory, work area and equipment
• Ensure good inventory of QC materials (purchased and prepared materials / glassware) to support testings; ensure no over surplus of inventory
• Ensure wastes are disposed appropriately and promptly
• Adheres to all safety and security policies and practices
• Assist the Senior Superintendent/Superintendent in the management and operations of the team; may be indirectly responsible for a team of associates:
• Scheduling day-to-day shopfloor activities and resources handling to ensure timely availability of test results
• Reviews test reports to ensure accuracy of test results in accordance with corporate, regulatory and external agency regulations.
• Provides training to the team.
• Provides guidance, support and technical expertise to the team.
• Involves in investigation and protocol writing (when required)
• Involves in SOP writing and updating
• Organization and Problem Solving:
• Creates strong team morale and a culture of accountability and ownership
• Recommends and coordinates appropriate corrective actions to quality problems in conjunction with other teams/ departments
• Presents in timely manner major issues to the management with strategies on their resolution.

Skills:

Professional

• For QC Associate, fresh graduate in NITEC/ Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry
• For Senior QC Associate, NITEC/Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry, with at least 2 years of working experiences or Fresh degree holder in Microbiology Biotechnology, Life Sciences, Chemistry, Biochemistry. Increased number of years of experiences are required for higher positions.
• For Lead QC Associate, NITEC/Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry, with at least 8 years of working experiences or Degree holder in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry with at least 4 years of working experiences.

Technical

• Competent technical skills in the following:
• Good laboratory knowledge and hands-on experience in chemistry testings o Laboratory equipment qualification
• (advantage)
• Knowledge of cGLP & cGMP (advantage)

Business

• Effective report writing skills
• Planning and Organizing skills
• Effective team player
• Analytical skills with logical thinking
• Good interpersonal skills
• Leadership skills (advantage)

Competencies:

• Good command of English
• Good knowledge on usage of computers

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To manage QC equipment life cycle from qualification to decommissioning including calibration and maintenance plan follow up

Key Responsibilities:

• Technical responsibilities
• Manage new QC equipment qualification as per change control and validation processes (i.e. URS, System classification, Audit trail review assessment, DQ/IQ/OQ, PPC09)
• Be author of SOPs/ protocols/ reports/ training materials
• Manage decomissioning of QC equipment and follow disposal
• process
• Maintain our QC asset listing up to date Follow QC equipment routine lifecycle
• Coordination of calibration and maintenance plan with user and external vendor/TS team
• Coordination of equipment troubleshooting if occurence of failure/breakdow (i.e. Tag in/out equipment, Work order creation)
• Sample transfer, alarm management and cleaning for fridges, freezers and incubators
• Liaise with external vendor for service quotation, escort vendor during service and approve invoice timely
• Supports compliance activities:
• Performs regular Ll audits in QC
• Coordinates and supports all L2, L3 and L4 audits and the associated CAPAs
• Lead and manage continuous improvement projects Subject-matter-expert (SME)/ audit fronter for assigned topics
• Manage ad-hoc tasks
• Organization and Management Responsibilities
• Creates strong team morale and a culture of accountability and ownership
• Provides leadership, guidance and technical expertise/support to the juniors
• Ensures continuous improvements of the QC operations
• Ensures expenditures are within budget
• Decision Making
• Proposals & Recommendations
• Based on experience & knowledge of work
• Proposal of CAPA for any issues/ deviations/ exceptions/ risks
• Proposal of QC improvement projects and strategies
• Team training and development

Skills:

Professional

• For Specialist - University Degree in a relevant Science discipline with at least 2 years of working experience or Diploma with at least 5 years of working experience
• For Senior Specialist - University Degree in a relevant Science discipline with at least 4 years of working experience or Diploma with at least 8 years of working experience

Technical

• Competent technical skills in project management
• Computer system validation Knowledge of cGLP & cGMP

Business

• Effective report writing skills
• Planning and Organizing skills
• Good interpersonal and communication skills
• Effective team player
• Analytical skills with logical thinking Problem solving skills

Competencies:

• Effective report writing skills
• Planning and organization skills
• Able to work independently
• Team player
• Analytical skills with logical thinking
• Leadership skills (advantage)
  ​​

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

We are looking for a Quality Control Assistant to support the Quality Assurance Executive in maintaining the highest standard of product quality and safety.

Job Description:

• Responsible for FSMS (GMP, HACCP, ISO 22000, HALAL) monitoring
• Consistent monitoring of quality and specification of product during processing
• Perform inspection for incoming material and outgoing finished product
• Recording and maintaining data for QC information
• Collect samples for product testing
• Report to the department lead on nonconforming products or processes detected

Requirement:

• Physically fit to work in cold room environments with the ability to stand and walk for extended periods.
• WSQ Food Safety Course Level 1 and/or Level 3 certification preferred, familiarity with food/seafood handling and processing is a plus.
• Meticulous with strong organizational and communication skills.
• Strong communication, organizational skills, and ability to walk and stand in a fast-paced cold working environment.
• Proficient in English and Mandarin to interact with Mandarin/English-speaking stakeholders.
• Willing to take up ad-hoc duties assigned by the company.
• Knowledge of SAP will be advantageous.

Job Highlights

• Job Types: Permanent/Contract
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, alternate Sat
• Great learning development opportunities.
• Work-life balance and positive/friendly working environment.

We are currently looking for an Electrical, Instrumentation & Control Engineer to support multiple projects in Singapore.

Your day to day role would involve the following activities:

• Experience across a broad range of site electrical and instrumentation engineering projects; experience in industrial buildings (Pharmaceutical, Food or Mission Critical projects) would be an advantage
• Progress reporting and manhour control for the electrical and instrumentation scope.
• Participate in troubleshooting and root cause investigation
• Work closely with calibration vendor and site team

We would like to hear from candidates who have:

• Min Degree in Electrical Engineering or its equivalent
• Min 6 years of relevant working experience in loop check, read drawings in building construction industry.
• Good knowledge of electrical and instrumentation specifications & requirements
• Be able to work independently with minimum guidance and under pressure to meet tight deadlines
• A strong ethical approach to safety, quality, environmental protection and business
• A proven track record working closely in partnership with clients and contractors

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Job Title

project control engineer

Occupation

PRODUCTION ENGINEERING CONSULTANT

Job Description & Requirements

Develop and update cost and resource loaded construction schedules. Establish and maintain harmonious client relationship to support project delivery and client satisfaction. Submit monthly reports to Project Manager and support internal reports preparation. Supervise planning, scheduling and cost engineering.

Job Summary:

We are seeking a highly skilled and motivated Planning and Control Engineer to join our team for a 12-month contract. The successful candidate will be responsible for managing and controlling project schedules, coordinating resources, and ensuring that projects are completed on time and within budget. This role requires strong analytical skills, proficiency in project management tools, and the ability to work collaboratively with cross-functional teams.

• Duration: 12 months
• Mobilization: Immediate
• Transportation: Not provided
• Working Schedule:Monday to Thursday: 7:30 AM to 5:30 PM
  Friday: 7:30 AM to 4:30 PM
  Total Hours per Week: 44 hours
  

Key Responsibilities:

• Develop, monitor, and update project schedules using project management software (e.g., Primavera P6, MS Project).
• Work closely with project managers, contractors, and stakeholders to ensure timely project execution.
• Conduct project planning and control activities, including resource allocation, budgeting, and cost control.
• Track project performance, identifying deviations from the plan, and recommending corrective actions.
• Prepare and present project reports, including progress reports, forecasts, and performance analysis.
• Assist in risk management by identifying potential delays and providing mitigation strategies.
• Ensure the alignment of project timelines with business objectives.
• Maintain accurate and up-to-date records of project schedules and changes.
• Coordinate with other departments to resolve issues and optimize the project delivery process.

Requirements:

• Education: Bachelor’s degree in Engineering, Project Management, or a related field.
• Experience: Proven experience as a Planning and Control Engineer or similar role in [relevant industry, e.g., construction, manufacturing, oil & gas, etc.].
• Technical Skills:Strong proficiency in project management software such as Primavera P6, MS Project, or similar tools.
  In-depth knowledge of project scheduling, cost control, and resource management.
  
• Soft Skills:Excellent analytical, problem-solving, and organizational skills.
  Strong communication and interpersonal skills, with the ability to collaborate effectively with stakeholders.
  
• Other Requirements:Ability to work under pressure and manage multiple projects simultaneously.
  PMP or similar project management certification is a plus.
  

How to Apply:

Interested candidates should submit their resume [email protected]

· Drive Technical and Maintenance support to all operating facilities in instrumentation and control systems, including ICSS / DCS / PLC

· Ensure the installations are maintained and managed with respect to regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore facilities in terms of Instrumentation and Control Systems

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Participate in planned shutdown as and when required

· Review and provide the engineering solutions for Management of Change Request from Facilities as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide in-house training for the offshore team as and when required

· Carry out competency evaluation for onboard E&I Supervisors and Instrument technicians as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating facilities

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required

Job Scope:

• Design and develop automated systems and processes to improve efficiency and productivity
• Program and configure automation hardware and software, including PLCs and SCADA systems
• Conduct system testing and troubleshooting to ensure optimal performance
• Collaborate with cross-functional teams to integrate automation solutions into existing systems
• Analyze data and system performance to identify areas for improvement
• Maintain documentation for automation processes, including specifications and user manuals
• Implement safety and quality standards in automated processes
• Provide technical support and training for end-users
• Stay updated on industry trends and emerging technologies in automation
• Participate in project planning and management activities, ensuring timelines and budgets are met

Requirements:

• Diploma or Degree in engineering discipline
• Minimum 3 years of experience in manufacturing industries with an automation background
• Proven track record in automation work is advantageous
• Required hands-on experience and remote support skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

An exciting opportunity as a Planning and Control Engineer awaits the successful candidate.

Responsibilities:

· Read the Contract and understand the overall project strategy to make proper planning evaluations of the work scope

· Support the project planning team on site, receive the planning and control data, analyze and identify risks or potential problems in the project progress, present the findings to the management team

· Participate in the planning meetings and all related meetings to be aware of the main concerns and issues of the project on the site

· Comment the reports, the schedules and all the data issuances related to the site scope, warn/alert the management team if any inconsistence or anomaly is found

· Liaise between the Planning and the Construction and Assembly (C&A) teams regarding the activities happening on site, and check if the activities are happening in accordance with the last updated plan and schedule issued

Requirements

· 5 (five) years of experience in similar services in the Oil and Gas industry

· Expert understanding of planning software such as Primavera P6, MS Project, and similar

· Expert understanding of project management parameters such as WBS, Project Risks, Project Schedule, and others within the PMBOK area of knowledge

· Experience in developing, analyzing, and adjusting Schedule in Primavera P6 software for big or complex projects

· Experience in Critical Path Report issuance and analysis

· Execution of daily/weekly reports and activities controls

· Expert understanding of Key Performance Indicators (KPIs) and control curves (S-curves, Rundown curves)

· Advanced use of Office package software such as Power Point, Word, and Excel

· Experience in FPSO construction and commissioning

· Good communication skills in English language

· Flexible working at Yards

Responsiblities

a) Manage asphalt premix production quality control processes;

b) Conduct regular inspections and testing;

c) Analyse test results and implement corrective actions;

d) Maintain quality control records and documentation;

e) Train production staff on quality control procedures;

f) Collaborate with production and laboratory teams;

g) Develop and implement quality improvement initiatives;

h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:

· Cooperate with employers and follow safety and health procedure;

· Report unsafe acts and incidents;

· Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

· Diploma / Certificate in Asphalt Technology or related fields

· Preferably with relevant experiences

· Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)

· Strong analytical and problem-solving skills

· Excellent communication and interpersonal skills

· Ability to interpret test results and make informed decisions

· Familiarity with quality management systems (ISO 9001)

· Proficient in Microsoft Office and laboratory software

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.