• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Responsibilities:

- Systems design and selection of equipment instrumentation and controls.

- Reviewing of customers’ specifications requirement and drawings.

- Define specifications and scope of work to contractors.

- Startup, testing, commissioning and troubleshooting of plants.

- Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control. - Responsible for Single Line Drawing, Control Schematic drawings. - Develop engineering capabilities and work with sales team on project proposal and bidding.

- Reviewing of customers' specifications and drawings.

- Execution of projects.

- Preparation of tender activities.

Requirements:

- Recognised degree by PE Board in Electrical / Instrumentation Engineering.

- Minimum 3 years relevant working experience, preferably with experiences in FEED of LV/MV switchboards, MCC, MCB, Control Panels etc and in Water & Waste Water industries.

- Knowledge in Instrumentation and Control.

- Able to read & understand single line diagram and generate Bill of Materials from single line diagram.

- Knowledge on control, schematics, motor controls and materials take-off.

- Proficient in AutoCAD, Microsoft Office.

- Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.

- Those with relevant project management, process design, and service & maintenance experience will be an added advantage.

*** Please apply with detail resume, stating present and expected salary, date of availability and/or notice period required.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

We're seeking a skilled Quality Engineer to join our team, focusing on automated testing for scalable applications. As a Quality Engineer, you'll play a critical role in ensuring the reliability, performance, and scalability of our products.

Key Responsibilities

• Develop and execute comprehensive testing strategies to guarantee product quality, reliability, and scalability.
• Collaborate with cross-functional teams to validate product integration, performance, and uptime, ensuring seamless deployment and user experience.
• Design, develop, and maintain automated testing frameworks using Jest (TypeScript) for unit testing and Playwright (TypeScript) for integration and end-to-end testing.
• Implement API stress testing using Locust (Python) to identify performance bottlenecks and ensure system resilience.
• Analyze test results, identify trends, and deliver detailed reports to stakeholders, informing product development and optimization.
• Collaborate with developers, product managers, and stakeholders to create testable requirements, resolve defects, and ensure effective testing.
• Stay up-to-date with advancements in testing methodologies, tools, and frameworks, applying this knowledge to improve testing efficiency and coverage.

Requirements

Essential Qualifications

• 3+ years of experience in quality engineering, focusing on automated testing for scalable applications.
• Proficiency in TypeScript, with experience using Jest for unit testing and Playwright for integration and end-to-end testing.
• Strong knowledge of API testing tools and frameworks, with hands-on experience in Locust or similar performance testing tools.
• Proven ability to design efficient test cases, think critically about edge cases, and ensure code reliability.
• Excellent problem-solving skills, with the ability to communicate testing strategies, findings, and recommendations to technical and non-technical audiences.

Nice to Have

• Experience with applications leveraging generative AI technologies.
• Interest in data science, artificial intelligence, and machine learning

Job Description:

1. Supplier Quality Management

• Develop and implement supplier quality management programs.
• Conduct regular audits and assessments of supplier facilities to ensure compliance with quality standards and regulatory requirements.
• Evaluate and approve new suppliers based on quality performance and capability assessments.

2. Quality Assurance and Control

• Establish and maintain incoming material inspection processes and criteria.
• Monitor and report on supplier performance, including quality metrics, delivery performance, and corrective actions.
• Work with suppliers to develop and implement corrective action plans to address quality issues.

3. Continuous Improvement

• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.

4. Collaboration and Communication

• Serve as the primary point of contact for all supplier-related quality issues.
• Work closely with internal teams, including engineering, production, and procurement, to address quality concerns and improve supplier relationships.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders.

5. Documentation and Compliance

• Ensure all supplier quality documentation is accurate, complete, and up-to-date.
• Maintain records of supplier audits, inspection results, and corrective actions.
• Ensure compliance with industry standards, customer requirements, and regulatory guidelines.

6. Training and Development

• Provide training and guidance to suppliers on quality standards, processes, and requirements.
• Mentor junior team members and support their professional development.

Job Requirements:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 7 years of experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong knowledge of semiconductor manufacturing processes and quality standards.
• Proven experience in conducting supplier audits and implementing corrective actions.
• Excellent problem-solving, analytical, and organizational skills.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers and internal teams.
• Preferred Skills: Certification in quality management (e.g., CQE, Six Sigma, Lean Manufacturing) is highly desirable.
• Proficiency in quality management tools and software.
• Experience with regulatory requirements and standards specific to the semiconductor industry.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Job Objective:

• Work closely with manufacturers and Engineers to implement and service audio visual and video conferencing solutions in accordance to company’s standards and best practices to meet customer’s requirements

Core Responsibilities:

• System configuration, Testing & Commissioning of Integrated Audio Visual and Videoconferencing solution.
• Conduct end user trainings to end users on how to use the Solution(s) implemented.
• Work closely with in house AV Designers and Engineers from different manufactures like Samsung, BOSE, Crestron, Extron, Poly, Logitech, etc to implement full integrated solutions for venues like meeting room, lecture room, experience centre, command centre, auditorium, ballroom, etc
• Study the schematic drawings to understand the technical & functional requirements to implement each solution
• Assist in after sales services

Education Qualification:

• ITE/ Diploma in IT/Engineering/Audio Visual

Optional Certification

• Crestron CTI-P101, CTI-P201, Extron Control Professional (ECP), Extron Authorized Programmer (EAP)
• Kramer Control System Designer (301), Kramer Control System Programmer (302)
• Dante Level 1 & 2, Cisco CCNT, CCNA

Experience:

Mandate

• Must have minimum 2 years of experience in System configuration, Testing & Commissioning for Audio Visual solution.
• Experience in Crestron, Extron, AMX, Kramer automation programming

Good to have

• Experience in DSP programming
• Experience in some of the products like Videowall, LED & LCD Display, Digital Sound Processor (DSP), Amplifier, Speaker, videoconferencing, Audio Visual Switches.
• Experience in similar renowned AV brands like Samsung, Crestron, Extron, BOSE, EV, Poly, Cisco, Logitech, etc

Opportunity

1. Acquiring wide and in-depth technical knowledge from renowned manufacturer products
2. Engagement with end users and manufacturers to further enhance communication skills
3. Acquiring skills through Training with Seniors and manufacturers
4. Job rotation will be given for excellent performance

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

Are you passionate about ensuring the highest quality in software services? We are seeking a Software Quality Engineer (QE) to join our team responsible for developing and maintaining disbursement system . As a QE, you will play a critical role in ensuring that our services are reliable, secure, and meet the needs of our users.

What to Expect:

• Test Planning & Maintenance: Create and maintain test cases and plans, ensuring they reflect the latest requirements and policy changes.
• Automation & Framework Development: Build, maintain, and improve automated testing frameworks and environments to enhance testing efficiency.
• Hands-on Testing: Conduct various forms of testing such as manual, functional, performance, and exploratory tests, and file defects when necessary.
• User Acceptance Testing (UAT): Support UAT activities, ensuring the system functions as expected before release.
• Production Support: Assist in resolving production cases to maintain high-quality operational systems.
• Agile Collaboration: Actively participate in all agile ceremonies, including stand-ups, sprint planning, and retrospectives.

Requirements:

• Educational Background: A degree in software engineering, computer engineering, electrical engineering, or an infocomm-related discipline.
• Testing Experience: At least 3 years of professional software quality testing experience with hands-on automation experience.
• Technical Skills:Strong understanding of testing techniques, test-driven development, and continuous integration/delivery.
  Experience with Java and Spring Boot frameworks is a plus.
  Familiarity with automated testing frameworks (Selenium, Cucumber, JUnit) or enterprise tools (HP UFT, QC, Mobile Center).
  Experience with performance testing tools like JMeter, Gatling, or enterprise tools such as HP LoadRunner.
  Knowledge of penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise-level tools (WebInspect, Nessus, CheckMarx).
• Agile Experience: Working experience in Agile environments is highly preferred.
• Soft Skills: Excellent verbal communication and listening skills, coupled with a proactive, self-driven, and motivated attitude.

Why Join Us?

• Be part of a team improving the quality of essential public services in Singapore.
• Work in an Agile environment that values continuous improvement and innovation.
• Enhance your skills in test automation, security, and performance testing using cutting-edge tools

Are you passionate about ensuring the highest quality in software services? We are seeking a Software Quality Engineer (QE) to join our team responsible for developing and maintaining disbursement system . As a QE, you will play a critical role in ensuring that our services are reliable, secure, and meet the needs of our users.

What to Expect:

• Test Planning & Maintenance: Create and maintain test cases and plans, ensuring they reflect the latest requirements and policy changes.
• Automation & Framework Development: Build, maintain, and improve automated testing frameworks and environments to enhance testing efficiency.
• Hands-on Testing: Conduct various forms of testing such as manual, functional, performance, and exploratory tests, and file defects when necessary.
• User Acceptance Testing (UAT): Support UAT activities, ensuring the system functions as expected before release.
• Production Support: Assist in resolving production cases to maintain high-quality operational systems.
• Agile Collaboration: Actively participate in all agile ceremonies, including stand-ups, sprint planning, and retrospectives.

Requirements:

• Educational Background: A degree in software engineering, computer engineering, electrical engineering, or an infocomm-related discipline.
• Testing Experience: At least 3 years of professional software quality testing experience with hands-on automation experience.
• Technical Skills:Strong understanding of testing techniques, test-driven development, and continuous integration/delivery.
  Experience with Java and Spring Boot frameworks is a plus.
  Familiarity with automated testing frameworks (Selenium, Cucumber, JUnit) or enterprise tools (HP UFT, QC, Mobile Center).
  Experience with performance testing tools like JMeter, Gatling, or enterprise tools such as HP LoadRunner.
  Knowledge of penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise-level tools (WebInspect, Nessus, CheckMarx).
• Agile Experience: Working experience in Agile environments is highly preferred.
• Soft Skills: Excellent verbal communication and listening skills, coupled with a proactive, self-driven, and motivated attitude.

Why Join Us?

• Be part of a team improving the quality of essential public services in Singapore.
• Work in an Agile environment that values continuous improvement and innovation.
• Enhance your skills in test automation, security, and performance testing using cutting-edge tools

About the job

Company Description

Explore the future of communication and finance with Vama – a cutting-edge app that integrates instant messaging and secure payments, incorporating the latest Fintech technology.

Role Description

This is a full-time on-site role for a Software Quality Assurance Engineer at Vama in Singapore. The Software Quality Assurance Engineer will be responsible for software quality, quality assurance, software development, manual testing, and ensuring the highest quality of software across mobile (iOS and Android), desktop (React Electron), and cloud platforms (GCP). You will work closely with development teams to create and execute test plans, identify bugs, and ensure a seamless user experience.

Key Responsibilities:

• Designed, developed, and executed detailed manual test plans, test cases, and test scripts for iOS, Android, and React Electron desktop applications.
• Perform functional, regression, and exploratory testing to identify defects and ensure product stability and performance.
• Collaborate with cross-functional teams, including developers, product managers, and designers, to understand product functionality and requirements.
• Participate in test planning, estimation, and coordination of testing activities within an Agile development environment.
• Identify, document, and track bugs using QASE or similar test management tools.
• Verify bug fixes and ensure they meet the required specifications.
• Integrate testing processes with continuous integration pipelines (CircleCI) for improved development workflows.
• Ensure proper documentation of testing results and provide feedback for product improvements.
• Test cloud-based applications hosted on Google Cloud Platform (GCP), ensuring scalability and performance requirements are met.

Requirements:

• Experience in Manual Testing: Proven experience in manual testing across web, mobile (iOS/Android), and desktop (React Electron) applications.
• GCP Expertise: Strong knowledge of Google Cloud Platform (GCP) and testing cloud-based applications.
• Mobile Testing: Experience in testing mobile applications on iOS and Android platforms.
• Desktop Testing: Experience with desktop applications, particularly React Electron.
• Test Management Tools: Proficiency with QASE or similar test management platforms for documenting and managing test cases.
• Continuous Integration Tools: Hands-on experience with CircleCI or other CI/CD tools.
• Strong Analytical Skills: Ability to analyse complex systems, debug issues, and provide detailed reports.
• Attention to Detail: A meticulous approach to testing to ensure all edge cases are covered.
• Collaboration: Strong communication skills and ability to work in a team-oriented environment.

Qualifications

• Software Quality, Quality Assurance, and Software Quality Assurance skills.
• Experience in Manual Testing and Software Development.
• Strong analytical and problem-solving abilities.
• Knowledge of testing methodologies and tools.
• Effective communication and collaboration skills.
• Attention to detail and accuracy.
• Bachelor's degree in Computer Science or related field.
• Certifications in quality assurance are a plus.

As a Process Control System Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

As a PDE Network Engineering Process Control System (PCS) Engineer/Senior Engineer, we will be responsible to develop smart manufacturing solutions towards the Industry 4.0 standard. We will gain exposure and knowledge in many cutting-edge areas including Machine Learning, Advanced Control Solutions and Deep Learning. As a PDE PCS Engineer, we will have the opportunity to develop a complete solution that starts from requirements gathering, data analysis and modeling with big data platform, followed by system development and integration; and then network wide implementation. The work we do directly affects the bottom line of the entire company by providing scrap/excursion control, Statistical Process Control (SPC), Advanced Process Control (APC or Run-to-Run), Fault Detection and Classification (FDC), and overall enhanced process capability. We will meet regularly and team with Process areas to understand their tools, processes, and challenges and work with them to create process control models, strategies, and other methods for ensuring quality output.

Responsibilities

• We develop, implement and improve smart control solutions for optimum manufacturing performances.
• We provide technical oversight, guidance and support for process control implementation
• We conduct intensive data analysis and modeling to identify sources of variation in the process and translate it into control solutions.
• We support PDE KEG team in Classification, Characterization and Categorization and define Data Collection Requirements, Perform Integration and Setup Data Collection in E3 Environment.
• We define Analysis and setup Requirements and Setup Limits and OCAP and engage in periodic review with PCS team and network on BKM practices.
• We develop and deliver training on control systems and related topics.

Requirement

• PhD, Masters/Bachelor’s Degree in Electrical and Electronics Engineering/Computer Science/Statistics/ Mathematics/Physics
• At least 4 years of experience in semiconductor manufacturing advanced process control.
• Experience and knowledge in Programming and Data Analysis. Preferred experience in Python/R/SQL/Hadoop eco-system and/or in the development of web-based applications
• Familiar with Machine Learning.
• Good communication and interpersonal social skills.
• Excellent problem solving and analytical skills.
• Excellent verbal and written communications skills. Good interpersonal skill and a good teammate.
• Excellent Project management skills.
• Ambitious and ability to multi-task and balance dynamic priorities.
• Ability to participate in a multi-functional team environment.
• Willing and capable of international travel, as needed, to accomplish your objectives.

Keen on the role? Apply now!

Job Title: Senior Software Quality Engineer (contract)

Responsibilities:

Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
Create, maintain and improve the automated test framework and test environments
Conduct testing on new features and file defects
Perform various tests such as manual/functional/performance/exploratory tests support UATs
Assist in resolving production cases; Participate in all agile ceremonies

Requirements:

Degree in Computing, Software Engineering, Computer Engineering, or Infocomm- related discipline with Minimum 5 years of professional software quality testing experience with hands-on automation
Strong understanding of testing techniques; Strong understanding of test-driven development, continuous integration and continuous delivery Experience with open-source automated testing frameworks (i.e., Robot, Appium, Selenium) or Enterprise level testing tools (e.g., HP Mobile Center, HP UFT, HP QC, Sprinter)

Experience with open-source performance testing tools (i.e., JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
Working experience in Agile environment will be an added advantage

Interested applicants can also email word formatted resume at [email protected]

Responsibilities:

• Perform quality control checks and generate QC/Halal reports for incoming and outgoing products to ensure that they meet quality and safety standards in accordance to SFA and MUIS regulations

• Perform sensory evaluation for incoming raw materials to ensure consistent quality and for product improvement

• Conduct quality control and Halal inspection for customer feedback

• Provide technical and quality related assistance to other departments, assist in marketing department’s recipe, videos and photo shoot when required

• Perform regular internal and external product quality control and monitor their quality so as to provide timely feedback to category/supplier for improvement

• Compile/archive QC/Halal report related documents

• Assist to maintain, source and purchase QC equipment and consumables when required

• Assist in product development or product improvement sensory evaluation preparations when required

• Assist sales or other departments with product specification, certification and quality related document requests

• Assist to liase with Halal/FSSC/ISO Authority on inspection and renewal of Related Certification.

• Assist on planning and executing Audit schedules

Requirements:

• Minimum Diploma in Food Science, Food Technology or related disciplines

• At least 2 years of relevant working experience in the food industry QC/R&D environment and familiar with ISO/FSSC 22,000 and Halal certifications

• Possess good interpersonal skills, self-motivated & methodical

Independent & a team player

• Proficient in Microsoft Office (Word, Excel & PowerPoint)

• Possess basic cooking skills

• Well Established Company
• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• DCS | PLC | SCADA | Harmonas Programming
• Training Provided

Job Responsibilities:

• Plan, design, and configure control systems for a variety of applications, ensuring seamless integration with Building Automation Systems (BAS), Distributed Control Systems (DCS), SCADA, and Programmable Logic Controllers (PLC)
• Create detailed control schematics and field termination drawings, ensuring accurate design documentation for system installation
• Set up and configure system databases, prepare control descriptions for Testing and Commissioning (T&C), ensuring all configurations are optimized for performance.
• Lead Factory Acceptance Testing to verify system functionality, compliance with project requirements, and quality standards.
• Provide hands-on support during installation, commissioning, and start-up phases. Troubleshoot, repair, and calibrate systems on-site to ensure optimal performance.
• Conduct in-depth troubleshooting and fault diagnosis across systems such as DCS, PLC, BAS, and SCADA to resolve issues and maintain smooth operation.
• Perform system testing, calibration, and fine-tuning to ensure systems operate at peak performance and meet specified requirements.
• Work closely with project managers, designers, and engineers to ensure projects are executed smoothly and on time. Communicate technical requirements and solutions effectively to clients and stakeholders.

Qualifications & Experience:

• Bachelor’s Degree in Electrical Engineering, Control Systems, Automation, or a related field.
• Proven experience in system configuration, design, and commissioning of DCS, PLC, BAS, and SCADA systems.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

This position is responsible for conducting audit checks to ensure that products meet the established standards, This role also supports the achievement of Company quality target.

1. Confirm to quality standard and quality processes

• Inspect in-coming and outgoing products according to policies standard.
• Perform all product processes within section (eg, QC,SAO), Reworks, Repairs, Defective photo-taking

2. Contribute to continuous improvement

• Maintain Integrity accuracy and completeness of Supplier invoice data and QC data in system
• Establish standard operating procedures and conditions for handling storage and checklist of stock.

3. Perform other ad-hoc duties as assigned.

Requirements

• At least 1 year of experience in Gold quality control in retail jewellery preferred
• If no QC experience in retail jewellery then at least 1 year of experience in QC control in manufacturing
• At least Diploma in any discipline
• Basic understanding of production methods.
• Attention to detail
• Able to use basic MS Office.
• Good Communication and Interpersonal Skills
• Able to multi-task and quick learner

Job Summary:

We are looking for a highly skilled Senior Supplier Quality Engineer to lead quality initiatives across our supplier base for thermal cooling solutions in the electronics and computing industry. The ideal candidate will be responsible for ensuring supplier quality and process reliability, working closely with suppliers to meet product excellence standards.

Key Responsibilities:

• Supplier Quality Monitoring & Improvement: Develop and implement supplier quality monitoring systems to ensure materials and components meet required quality standards. Identify and resolve non-conformance issues with suppliers.
• Supplier Process Optimization: Partner with suppliers to enhance their processes, improving yield and ensuring consistent quality of materials and components.
• Abnormal Quality Issue Management: Lead efforts to address and resolve abnormal quality issues with suppliers, implementing corrective and preventive actions.
• Supplier Audits & Compliance: Conduct supplier audits to assess quality systems, process capabilities, and compliance with industry standards. Drive continuous improvement initiatives based on audit findings.
• Supplier Development: Collaborate with suppliers to enhance their quality processes, ensuring alignment with company standards and customer expectations.
• Cross-Functional Collaboration: Coordinate with design, production, and procurement teams to ensure effective communication and alignment on supplier quality expectations.
• Continuous Improvement: Foster a culture of continuous improvement by working closely with suppliers to enhance their quality management systems and manufacturing processes.

Requirements:

• Bachelor's degree in the related field
• Proven experience in supplier quality engineering, particularly in manufacturing or electronics environments.
• Prefer candidates with experience in mental stamping, forging, brazing, die casting, CNC machining, milling, and other metalworking techniques.
• In-depth knowledge of supplier quality management systems and industry standards.
• Strong analytical, problem-solving, and negotiation skills.
• Familiarity with supplier audits, corrective actions, and continuous improvement practices.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel extensively and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Job Summary:

We are seeking an experienced Design Quality Engineer to lead quality initiatives for our thermal cooling solutions in the electronics and computing sectors. The ideal candidate will focus on ensuring design and process quality, driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and cross-functional collaboration, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement solutions and preventive actions.
• Process & Quality Control Enhancement: Strengthen internal quality control systems and enhance process capabilities. Lead initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to stakeholders.
• Inspection Process Optimization: Optimize the quality inspection process by integrating automation and cutting-edge technologies where applicable.
• Cross-Department Collaboration: Promote communication and collaboration between design, production, and other teams to ensure consistent adherence to quality standards.
• Team Leadership: Oversee the quality team’s task assignments, performance, and development, ensuring timely delivery of objectives.

Requirements:

• Bachelor's degree in the related field
• Proven experience in quality engineering, with a focus on manufacturing and design quality.
• Prefer candidates with experience in mental stamping, forging, brazing, die casting, CNC machining, milling, and other metalworking techniques.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and industry standards.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

• Collaborate and communicate effectively with internal teams, including OPS packers, admin/logistics coordinators, and the QC team.
• Perform daily quality checks on inspection reports from Kizeo to ensure they meet documentation standards.
• Manage the distribution and revision of all company quality documentation, updating work instructions when necessary.
• Review and verify the accuracy of reports submitted by the QC team daily.
• Track and update the qualifications and training requirements for quality inspection personnel as directed by the executive and manager.
• Update the department's work instructions to reflect changes in job flow or customer requirements.
• Step in as a QC inspector to carry out routine inspections when needed.
• Perform Y7 tasks in SAP for NC crates.
• Handle any other ad-hoc tasks assigned by the executive or manager.

Requirements:

• Proficient in MS Office (Word, Excel, Outlook).
• At least 1 year of experience in a warehousing environment.
• Able to adapt to a fast-paced, detail-oriented role.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.