As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to perform modelling and real-time simulation of electric vessel’s onboard microgrid and propulsion system.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to develop onboard microgrid simulation models with energy management systems as well as to plan and test the relevant hardware systems.
• Work with research team to deliver the work scope and undertake these responsibilities in the project.
  Work Responsibilities:
  1. Develop detailed electrical models of the microgrid (power system) of various e-vessels based on the concept design in a simulation environment such as Matlab/Simulink.
  2. Design and develop an intelligent energy management system for the e-vessel microgrid for coordinated control of multiple energy sources considering cost, carbon, and operation constraints.
  3. Operate the simulated electrical model with EMS controller to perform simulations for various cases to demonstrate performance and recommend improvements at unit, sub-system and whole system level.
  4. Implement and carry out simulation studies for onboard microgrid and connection to shore charging infrastructure.
• Recommend efficient and reliable power system architecture(s) with other merits of high-density and light-weight.
• Test the relevant power electronics and drives system hardware and troubleshoot the challenging problems.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment and assist in laboratory management.
• Mentor students involved in the research project
• For those hired at senior levels, management responsibilities may be included

Job Requirements

• Have a Master’s or PhD’s degree in Electrical Engineering or equivalent from a recognized University. Major in Power Engineering will be advantageous.
• Minimum 3 years of relevant experience in modelling and energy management algorithm development using MATLAB/Simulink for microgrid applications.
• Knowledge of power electronics, drives, and control is highly preferred. Hardware testing experience will be advantageous.
• Have experience and commitment to participate in project meetings.
• Self-motivated team player and good project management skills.
• Excellent writing, communication, presentation, and interpersonal skills.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Role:

Production Engineer (Mechanical / Manufacturing)

• Singapore Based (Senoko, Sembawang area, company transport provided)
• 5 Days work per week (8am to 5.30pm)
• Salary: Up to $3100 + Allowance + AWS + VB
• Degree in Mechanical/Manufacturing Engineering or equivalent + 1 year with relevant experience is an added advantage.
• Knowledge on TS/IATF 16949, OHSAS18001, ISO14001, SPC, FMEA and TPM will be added advantage.
• Require putting on jumpsuit and protective mask as Personal Protective Equipment whenever it is necessary. + Willing to work overtime when needed
• Career Progression Opportunities

Responsibilities

• Responsible for production operation activities to ensure smooth and efficient manufacturing process.
• Liaise with cross functional department on effective corrective/preventive actions, including carry out improvement activities such as process optimization, benchmarking, etc through various statistical tools and software.
• Handle audit in accordance with TS/IATF & ISO and OHSAS requirements

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

• Mentorship, guidance, and training will 100% be provided
• Great for fresh grads who want to start out in the engineering field

• Responsibilities:
• Design, prepare shop drawing, methods statements, quality installation, inspection, testing and commissioning, documentation works for BMS system.
• Site coordination, project schedule planning, coordinate site works
• Design and deploy BMS controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services

Requirements:

• Min Diploma / Degree in Engineering (Mechanical / Electrical Engineering / Construction / Building related)
• Able to define BMS project work scope, requirements and specifications, and identify, allocate resources for executing the project from start to completion.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

IT Support Engineer

• Salary Range: $4,000 - $4,500
• Working Days: 5 Days Mon-Fri 8.30AM-6.00PM
• Location: Siglap

Job Summary

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh/renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies

Responsibilities:

• Provide 1st and 2nd Level IT Support to end-users
• Provide end-user IT support for both local and remote locations daily to ensure smooth business operation including end-user computing device performance monitoring
• Perform installation, configuration and maintenance of computers, workstations, applications and other related equipment and devices
• Perform IT asset lifecycle management including tech refresh, preventive maintenance (Eg. Laptops / Printers) and software license monitoring
• Responsible for the procurement of IT equipment, software and related products including administering procurement processes and supporting in requirements scoping and evaluation
• Manage IT vendors (service quality, feedback, improvements) and service contracts
• Provide assistance in the implementation of new end-user computing technologies
• Any other IT duties as assigned

Requirements:

• Recognized Diploma or Degree in Information Technology or equivalent
• Minimum 3 years of experience in providing IT support to end- user community
• Experienced in troubleshooting IT issues at L1/L2 support levels and escalating to higher levels of IT support

☎️ Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.
• We are looking for people who
• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Research & Development (R&D), Post Market Surveillance, and Global Regulatory Affairs (RA) Teams

Reports to: Senior Manager QA R&D

Function: Global QA & Compliance Organization

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible to ensure that products meet quality goals and regulatory requirements, including but not limited to FDA Regulations, ISO 13485, EU MDR requirements, and Risk Management per ISO 14971 and maintain compliance of the Quality Management System (QMS).

Duties and Responsibilities

• Partner with R&D teams in the USA, Japan, and Singapore to ensure that design control is completed in accordance with procedures, WI, regulatory requirements, and assure that required outputs have been completed
• Execute risk management for devices, processes, and provide the assessment results from product development through to the launch
• Maintain and update risk management files with Global R&D/Manufacturing Engineering (ME) teams to support product development (Risk Management Plans, Risk Control Log, Benefit Risk Assessment Risk Management Report, xFMEA, etc.), and act as the Risk Management expert
• Assist in the review and approval of design development plans, verification and validation protocols, reports, master V&V plans and reports, and design transfer
• Review and approve design verification test protocols, reports and data from a logical point of view (Compliance, rationale, objectiveness and statistics)
• Partner within Quality and R&D to ensure design control documentation (Risk Management, Traceability/Linkages) & design change control requirements are met
• Review and approve biocompatibility protocols and reports
• Ensure compliance of IQ, OQ, tests method validation, Standard Operating procedures and work instructions regarding product development
• Maintain compliance to QMS procedures of the R&D Singapore site, and support the Singapore R&D Site - QA
• Support External audits by competent authorities and notified bodies
• Support internal audits at the local site, and other sites as required
• Review and approve other quality documents (e.g., IQ, OQ, PQ, WI, etc) within areas of responsibility
• Propose and execute quality/process improvements. Write/review policies/ processes/ procedures and related documents
• Manage and monitor the progress of the calibration and maintenance of testing equipment. Ensure calibration or maintenance records satisfy regulatory and QMS requirements (act as Equipment Control Administrator in Singapore)
• Participate in development projects and change control request meetings to support the resolution of engineering issues
• Collaborate with the post-market surveillance team and complaints investigation teams to maintain risk management process throughout a product’s lifecycle
• Provide support for other quality activities and improvement initiatives, quality data collection and trending, CAPAs, change controls, training, etc.
• Support initiatives as identified by management to support QMS and other regulatory requirements in Singapore

Requirements

Experience

• At least 4+ years of Industry experience working as QE Engineer in Medical Device/ Pharmaceutical product or optical engineering business field
• Experience in test method validation
• Experience in Design control, Design Transfer, Design and Development Process
• Demonstrated knowledge of Risk Management (ISO14971), Design control, Design and Development Process and Quality System (any one of ISO13485).
• Understanding and Knowledge of biocompatibility studies
• Experience in coordination and planning of complex activities and ability to identify and resolve complex problems through effective use of technical and interpersonal skills
• Product development experience (e.g. approaches for definition of requirements and specification setting for verification and validation). Practical experience in design control and risk management
• Effective use of oral and written communication skills to clearly communicate the quality position, and the actions necessary to resolve issues
• Interpersonal, team, leadership, and negotiation skills to handle conflicting priorities
• Strong oral and written communication skills, excellent interpersonal and cross-cultural skills required
• Capable of clearly presenting and justifying quality requirements to management
• Accreditation by a professional body is highly desirable. Examples include American Society for Quality (ASQ) Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)

Skills/Accreditations

• Smooth communication ability
• Business software skills (e.g. Word, Excel and Power point)
• Experience with statistical software such as Minitab
• Voluntary working attitude with a creative idea
• Passionate working attitude to pursue a goal with patience.
• Flexibility for changes

Academic Qualifications

• A bachelor’s degree or higher in Chemical, Bioengineering, Mechanical, Optical Engineering or related fields.

Travel requirements

• 2-3 international travel annually mainly Thailand.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

We are looking for a Staff Analog Layout Engineer to contribute to the development of High-Speed Connectivity, Broadband Analog and Computing/Storage-Memory Data-Transport products (including functional blocks such as high-speed digital, multi-GHz ADC/DAC, PLL/DLL serial and parallel I/O, and clock generation/distribution for custom ICs). The candidate must have a proven record of laying out high-performance analog circuits in state-of-the-art CMOS process technologies, successfully performed top-level integrations, and placed products into volume production multiple times.

Requirements

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and at least 5+ years of related professional experience.
• Master’s degree in Computer Science, Electrical Engineering or related fields with 3+ professional experience.
• Deep understanding of layout methodology from initial chip planning to tape-out.
• Deep understanding parasitic optimizing in layout
• Experiences in advanced process technology and Fin-FET is preferable.
• Have a high level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports.
• Have a high-level proficiency/knowledge of Synopsys or CADENCE layout entry tools.
• Programming skills in any of the following are a plus: Skill or Ample or Perl, etc.
• Strong technical and analytical background, problem solving skills, etc.
• Fluent in English

• Singapore Based (Bukit Merah)
• 5 Days 8.30am to 5.30pm
• Salary - $2500 to $3500 (Depends on experience)
• Nitec or Diploma in Electrical Engineering or Equivalent; At least 1 year experience in sales/customer service.
• Career Progression Opportunities

Requirements

• Nitec or Diploma in Electrical Engineering or Equivalent
• At least on year experience in sales/customer service
• Electrical Knowledge

Job scope

• Your job and responsibilities include support sales personnel for pre-sales activities, proposing solution that suits customer needs & resolve related solution for site preparation, installation, start-up, commissioning, repair and maintenance of Electrical Power System, Structural cabling, Fire suppression system, UPS, Security Access and CCTV Monitoring System etc.
• To supervise and oversee the work progress of project sites. This includes attending to site meeting, coordinating with appointed sub-contractors of various services to see to a smooth completion of projects.
• You will be assisting the Electrical Service Department in providing technical support to our staff, customers, and dealers.
• Prepare and maintain all project management documentation in accordance with company’s best practices.
• Planning and monitoring the project to ensure successful completion within planned timeline as well as status of progress-in-work and report all matters related to project and services.
• You are required to perform a complete in-house testing of Power equipment’s.
• Answer and attend to service calls, fault-finding, repair and troubleshooting of Electrical System and Power equipment malfunction.
• Establish and maintain excellent relationships with the customer project team, supplier, sub-contractors, and clients.
• Coordinate and liaise with PEs and/or site supervisors on detail drawings, layout planning and understanding of site requirements.
• Prepare, submit, and follow up with applications to the relevant authorities or building management where required.
• Preparation of electrical products data & engineering drawing in AutoCAD (2D, 3D).
• You may be assigned with other job duties and functions as may be instructed from time to time by your superior or the management.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

As a Customer Service Officer, you act as the first point of contact for customers to resolve or escalate issues for resolution. You also perform administrative support to ensure smooth delivery of operations.

Roles and Responsibilities

· Attend to customer enquiries, feedback and complaints via phone, email or in-person.

· Check and monitor CCTVs for discrepancies, system issues and incidents.

· Obtain and evaluate all relevant information to escalate car park cases to the Operations or Technical teams.

· Monitor incident queues and work with operational teams to ensure escalated cases are resolved within the required service levels and customer requirements.

· Perform investigations and process refunds for customers.

· Perform administrative tasks related to customers data such as service reports etc.

· Monitor and track manpower deployment for Operations and Technical teams.

Requirements

· At least GCE ‘O’ Levels or equivalent.

· At least 2 years of working experience in the customer service or call centre roles.

· Required to work rotating shifts due to 24/7 operations of control centre.

· Excellent customer service and communication skills.

Proficient in Microsoft Office tools (Excel and Word).

☑ Basic $ 4500 - $ 6000

☑ MNC - High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm / 8.30am – 6pm )

☑ East Region – A1 Builder

Job Description

• Develop and manage project schedules from design to commissioning.
• Estimate durations, resources, and prepare progress reports.
• Handle tender submissions, site planning, and progress monitoring.
• Manage EOT claims and oversee RI/TOP schedules and handovers.

Job Requirements:

• Diploma/Degree in Civil Engineering or related
• Min 3 years of experience in construction planning building-related facilities.
• Proficiency in MS Project Planner, Primavera, or Synchro.

Interested applicants are welcome to apply or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

• Job Purpose

Biosearch Technologies™ provides products and services for genomic analysis that support mission critical applications for global customers in agrigenomics and human healthcare. The portfolio offers integrated tools and technologies to accelerate sample preparation, amplification, cloning and expression, next generation sequencing (NGS), custom oligonucleotide synthesis, nucleic acid chemistry reagents, and oligo therapeutics. Biosearch Technologies is currently recruiting for a field service engineer II to join us in providing front-line technical support to our repertoire of genomics platform and consumables as described above.

With a focus on always putting customers first, our Field Service Engineer is expected to work closely with our regional customer base to ensure maximum equipment uptime, software optimal utilization, training and troubleshooting functions. 

Field Service Engineer is expected to be a role model and poise to mentor and develop junior service engineers on the day-to-day activities, coaching sessions and able to report and assign task to juniors and self and provide reports back to global service leads.

Key Responsibilities

• Build strong service support rapport with regional key account customers in APAC.
• Site Preparation; instrument Installations; training; troubleshooting, preventative maintenance as core task
• Facilitating service contract proposals and tracking as and when required.
• Function as an integral part of a wider global support team to offer “In Time zone 24/7” emergency service support call and troubleshooting assistance as and when assigned with urgent breakdown call with overnight travel either regionally or globally.    
• Train and support customer in the application of “SFDC sales force” CRM platform as a service case tool to record and track service cases
• Support the generation of training aids and technical documentations as required
• Provide timely and concise Pre/Post trip reports and SFDC updates to maintain proper customer CRM records
• Work closely with the commercial and customer service team to ensure prompt and responsive customer support in building strong customer allegiance for the LGC, D&G branding.
• After normal office hours on-call support assignments (global support rotation) as part of a global technical support framework.
• Involving in engineering project, product management request for technical feedback/support
• The individual will be responsible for instrument commissioning, training, test and repair of equipment, and preventative maintenance.
• Expected to mentor junior field service engineers in problem resolution.
• Seeks continuous improvement processes to optimize technical support to our customers in the region.
• This position is responsible to effectively communicate instrument status, issues, and customer complaints and needs to appropriate managers and internal resources.  Will be responsible to proactively take ownership and follow-through with generated issues or complaints reported from themselves, as assigned, or from junior service engineers.
• Responds with flexibility and collaboration to the needs of the business – both internally and externally – by addressing important corporate initiatives when requested by management.
• Ability to handle clients, distributors professionally during all interface and maintain a positive company images
• The motivation to learn and constantly improve processes and tools
• Adhere to company safety standards and promote safety culture throughout the company
• Any other ad-hoc projects and duties as required by the management

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Ensure appointed MV VCD and MV motor suppliers supply equipment that meets project specificatiions.
• Ensure appointed LV MCC panel suppliers supply electrical panel (MSS with DOL, soft-starter, 2 speed, LV VSD starters and control circuit of motor starter) that meets project specification.
• To coordinate with different stakeholders subcon, suppliers, main con and consultant with regard for detail design development of the LV MCC, MV, VSD and interfacing work between subsystem work package.
• Prepare FAT & SAT test plan for 6.6 kV MV VSD and MV motor.
• Prepare FAT & SAT test plan for LV MCC.
• Update SLD drawings for tie-in to upstream incomers and all downstream ACMV equipment.
• Update Low Voltage cable sizing & short circuit calculation.
• Update actual demand load calculation.
• Prepare discrimination study with all upstream incoming breakers for both MV 6.6kV and LV 400V equipment
• Attend meeting with suppliers, main contractor and consultants to provide reasonable explanation, possible solutions and guidance if they are in doubt.
• Ensure all cable routing with their associated wall openings and / or cable risers are provided for all 6.6kV and 400V ACMV equipment.

Requirements

• At least a Diploma in Engineering majoring in MEP / Electrical or related field.
• Minimum 4 years of working experience. Those with more years of experience will be considered a senior position ie Senior Engineer / Assistant Manager
• Those with Construction Industry (majoring in Electrical Control for ACMV) will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad, Revit, Microstation and Primevera software will be an added advantage.
• Willingness to work at Tuas area with transportation pickup at designated MRT stations.

Job Description

• Prepare, schedule, manage, coordinate and monitor projects
• Perform value engineering design to achieve high efficient standard for ACMV System
• Develop tender specifications and perform natural & unbiased tender evaluations
• Attend to site test and inspections to ensure quality of standards and all health & safety requirements are adhered to
• Assist in the preparation of progress payments claims and variation orders where required
• Work closely with Project Managers and site personnel in the execution of task schedule
• Supervise contractors, sub-contractors, suppliers and staff at site

Requirements

• Diploma / Bachelor degree in M&E or related engineering field
• For Senior position, at least 2 years of professional project management experience, preferably in ACMV and within construction industry
• Understanding of building systems particularly in HVAC systems and other M&E disciplines
• Ability to identify innovative solutions to problems
• Proactive, possess a positive attitude and able to work independently
• Must have good interpersonal, verbal and written skills
• Must have initiative and possess desire to learn
• Ability to multi-task and work as a team

Job Description :-

· Responsible for day-to-day operation and planning manpower allocation based on job requirements

· Arrange logistics for deliveries and provide photo reports for job completion

· Source materials and spare parts as a purchaser when needed

· Proficient in reading drawings for steel and piping work

· Flexible in adapting to changes in job scope

· Inspect and prepare quotations for workshop fabrication, vessel port calls, anchorage work, and

voyage jobs

· Manage production teams and subcontractors for efficient job mobilization

· Prepare project schedules and oversee project activities for timely completion and quality

· Negotiate and liaise with vendors and suppliers for best prices and availability of materials

· Conduct regular equipment inspections and maintenance

· Monitor project budgets and expenses for cost-effectiveness

· Maintain documentation and records related to project activities and operations

· Stay updated with industry trends and suggest improvements and innovative solutions

· Foster teamwork and effective communication to create a positive work environment

· Adhere to safety protocols and regulations for a safe working environment

Requirements :-

· Higher Nitec/Diploma/Degree in Marine Engineering or equivalent

· Highly motivated individual with a strong work ethic and proactive approach

· Quick learners who take ownership of diverse projects and continuously acquire new skills

· Forward-thinking professionals who seek challenges for self-improvement and assisting others

· Able to travel overseas for Project discussion and management

. Have driving license is a bonus

· Fresh Graduate is welcome

As the Equipment Supplier Quality Principal Engineer, you will lead a global team to ensure the highest quality standards for equipment supplied to our company. You will be responsible for establishing and maintaining strong relationships with critical suppliers, managing supplier quality governance processes, and driving continuous improvement programs. This role requires collaboration with various departments, including development, engineering, manufacturing, and procurement, to meet the business needs and ensure supplier compliance with quality management systems.

Key Responsibilities:

• Lead and manage a global team of Supplier Quality Engineers to achieve best-in-class supplier quality performance.
• Establish and maintain close relationships with critical suppliers' management teams and internal stakeholders.
• Ensure consistent management and deployment of quality requirements and supplier quality governance processes.
• Drive continuous improvement programs with critical suppliers to enhance quality performance.
• Ensure suppliers deliver the highest possible quality materials and comply with Quality Management System (QMS) requirements, standards, and other quality safeguard programs.
• Conduct regular audits and assessments of supplier processes and quality systems.
• Develop and implement supplier quality metrics and performance monitoring systems.
• Collaborate with development, engineering, manufacturing, and procurement teams to resolve quality issues and implement corrective actions.
• Provide training and support to suppliers on quality standards and requirements.

Qualifications:

• Bachelor's degree in Materials Science, Electrical Engineering, Mechanical Engineering, or a related field.
• Minimum of 8-10 years of experience in supplier quality management, preferably in the semiconductor or electronics industry.
• Strong knowledge of quality management systems, standards, and methodologies.
• Proven experience in leading and managing a global team.
• Excellent communication and interpersonal skills.
• Strong analytical and problem-solving abilities.
• Ability to work effectively in a fast-paced and dynamic environment.

Preferred Qualifications:

• Master's degree in a related field.
• Certification in quality management (e.g., Six Sigma, ISO 9001).
• Experience with supplier quality management in a multinational corporation.

Job Description

• Reporting to Global Category Microcontroller & Memories (MCM), strive to secure “Best in Class” consistent and sustainable supplier quality performance to reach the Continental Business and Quality targets.
• Maintenance of the defined Supplier Quality Management System (procedures, guidelines, and tools) to ensure the requested quality is in line with the defined supplier management strategies to meet the quality targets.
• Execution of supplier evaluations and assessments to support the cross-functional supplier selection team with the required quality data.
• Driving supplier development & improvement activities at supplier's site.
• Initiation and introduction of the preferred supplier and components strategy.
• Design, initiation, and control of preventive quality management measurements in the design and development phase for supplied parts and services to ensure that our products meet the quality requirements defined.
• Component introduction through robust APQP process which include Component sourcing, writing of specifications, handling of qualifications and risk management.
• Manage change requests (PCN) from component suppliers and assure comprehensive qualification of any change.
• Support of the data system to collect and evaluate supplier quality related key performance indicators (KPIs) for the regular reporting of quality performance.
• Support for the continuous improvement process of all supplier quality-related processes, guidelines, and tools by means of supplier audits, on-site assessments, and benchmarking and best practice sharing programs.

Qualifications

• Degree in Electronics/Electrical Engineering (or related) with minimum 5 years’ experience, preferably in the automotive industry
• Candidates with experience in semiconductor processes (e.g., wafer process technologies, back-end assembly, and testing), knowledge in electronic component & qualification requirements (e.g., AEC-Q, JEDEC, IP qualification) preferred. Candidate with more work experiences may be considered for Principal role.
• Strong experience in quality systems, process audits and part qualification.
• Understanding of automotive practices such as APQP/PPAP/VDA6.3/IATF16949.
• Able to lead suppliers' development and audit activities within Asia.
• Able to work independently and travel frequently (e.g. SE-Asia, China, Japan & S. Korea).
• Strong interpersonal and communication skills e.g. in collaborations, problem solving process, conveying technical details and presentation.

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

You will be part of the Marvell Quality Management System (QMS) team that plays a crucial role in maintaining high standards within the company. The team develops and implements efficient and effective quality system processes, ensuring that complies with relevant industry standards and also focuses on meeting and exceeding customer expectations. The QMS team continuously looks for ways to improve processes. This could involve streamlining workflows, adopting new technologies, or refining existing methods to enhance efficiency and effectiveness.

What You Can Expect

• Manage Agile PLM Processes: Oversee the process and workflows for Product/Process Change Notices (PCN) and Technical Document Change Orders (DCO) in Agile PLM tool.
• Prepare PCN Documents: Ensure PCN documents are properly formatted and content-ready for routing, approval, and publishing.
• Complete Document Change Orders: Verify all document change orders are finalized and coordinate release for internal/external use.
• Administrative Support: Provide primary administrative support for PCN customer distribution within the Customer Portal.
• Customer-Specific PCN Forms: Assist in completing and submitting customer-specific PCN forms on designated customer sites.
• Quality Document Maintenance: Maintain frequently requested quality documents in the Customer Portal.
• Resolve Agile Errors: Collaborate with users and IT to resolve Agile system errors.
• Support Cross-Functional Projects: Participate in cross-functional projects, including system and process integrations, data migration, and automation initiatives.
• User Training: Support process training sessions, including one-on-one coaching, on document control tools, processes, and best practices across Marvell.
• Process Metrics Dashboard: Sustain PCN and DCO metrics dashboard and publish reports on change status, cycle times, and other relevant metrics.

What We're Looking For

• Bachelor of Science degree in Quality, or related technical discipline
• 10+ years of experience in a quality system process management, ISO9001 compliance, change control process, Agile /Oracle tools.
• In-depth technical knowledge of Agile/Oracle.
• CAPA and problem-solving techniques, i.e. 5 WHYs, Fishbone diagram, etc
• Familiar with Product/Process Change Notification process.
• Familiar with continuous improvement methodologies, i.e. Kaizen, 5S, Lessons Learned
• Background in semiconductor manufacturing/assembly or product/test (IC and Board).
• Demonstrated experience with change control management, end of life process, corrective and preventive action, waiver/deviation and other quality management related processes
• Excellent written and oral communication skills
• Proficient with MS Office & data analysis tools

To apply, please submit your application via this link: Marvell Careers

Duty and responsibility

• Plan, organize and ensure the First Article, Incoming QC, In-Process QC; Final-QC activities are performed efficiently and effectively.
• Supervise and lead a team of QC Leaders/Specialist/Inspectors.
• Establish, review quality control plans, standard operating procedures to ensure products and processes conform with customer specifications
• Work with cross functional departments to ensure product quality and system requirements are realized.
• Liaise with suppliers to improve their processes and resolve material/component related quality issues including RTV lots.
• Perform internal audit to warrant processes and procedures are well maintain and comply with ISO 9001, 13485 Standards and Regulatory requirements
• Lead in the investigation of product non-conformity, gather, analyse data to determine root cause and implement corrective/preventive action to prevent recurrence.

Requirement

• 5 years’ experience in QA functions, preferably in the medical device/plastic moulding manufacturing.
• Good knowledgeable in statistical techniques, eg SPC, CPK, Gage R&R and FMEA.
• Well versed in measurement metrology eg, familiar with CMM, Smart-scope and the ability to interpret Engineering drawings and specifications.
• Computer literate with proficiency in Microsoft Office (Word, Excel, and Power Point).

• Candidate must possess at least Bachelor's Degree in Engineering (Civil & Structural) from local or recognized foreign universities subject to Client's approval
• 3 years & above working experience in the related field is required for this position
• Perform Engineering Design and drawings
• Project coordination and documentation
• Perform building/site inspections.
• Attend progress meetings.
• Work related travel and meetings
• Any other duties as assigned

Job Requirement

• Keen to learn and work independently with minimum guidance.
• Able to work under pressure, dynamic, creative and results oriented.
• Conversant in regulatory requirements and building codes.
• Good knowledge of AutoCad and Revit.
• Possess Class 3/3A driving license preferred.

Sales & Business Development:

Identify new business opportunities in the oil & gas, mining, and construction sectors.

Develop and execute sales strategies to achieve sales targets and grow market share.

Build and maintain strong relationships with key decision-makers, including engineers, procurement managers, and senior executives.

Conduct market research and competitor analysis to identify emerging trends and opportunities.

Technical Expertise & Consultation:

Provide technical guidance and support to customers in selecting appropriate rig solutions based on their needs and operational requirements.

Offer customized product recommendations, including rigs, drilling equipment, and related services.

Collaborate with engineering teams to ensure that client specifications are met and to provide solutions for technical challenges.

Product Presentations & Demonstrations:

Prepare and deliver engaging presentations and demonstrations of rig products and services to potential customers.

Organize site visits, client meetings, and product demonstrations to showcase rig capabilities.

Proposal Development & Negotiation:

Prepare technical and commercial proposals, including cost estimates, delivery timelines, and terms & conditions.

Negotiate contracts and pricing terms to close sales and ensure long-term customer satisfaction.

Project Coordination & Follow-up:

Work closely with the operations and project management teams to ensure timely and successful delivery and installation of rigs.

Provide after-sales support, ensuring customer satisfaction and addressing any issues or concerns related to rig performance or service.

Market Intelligence & Reporting:

Stay up-to-date on industry trends, product advancements, and competitor activities.

Provide regular sales forecasts, activity reports, and market feedback to management.

Qualifications & Skills:

Education:

Diploma in related technical field.

Experience:

Minimum of 3-5 years of experience in a sales or technical sales role within the oil & gas, construction, or mining industries.

Strong understanding of drilling rigs, equipment, and related technologies.

Proven track record of achieving sales targets and building long-term customer relationships.

Technical Skills:

Knowledge of rig equipment and drilling systems, including land rigs, offshore rigs, and related machinery.

Strong technical aptitude with the ability to communicate complex engineering concepts clearly to non-technical stakeholders.

Sales & Communication Skills:

Excellent verbal and written communication skills with the ability to present and negotiate effectively.

Strong interpersonal skills and the ability to build rapport with clients at all levels.

Other Skills:

Self-motivated with the ability to work independently and as part of a team.

Ability to handle multiple tasks and prioritize effectively in a fast-paced environment.

Proficient in Microsoft Office Suite (Excel, Word, PowerPoint) and CRM software.

Job Description & Requirements

Responsibilities

• Management of approval, process and documentation for utilities & services.
• Liaise with utility agencies/authority on services/ relocation/installation of utility and services.
• Supervise utility diversion and trial trench works.
• Ensure safe and uninterrupted utilities supply to site.
• Develop operational SOP/Procedures for utilities/services works.

Requirements

• Degree in Civil Engineering or Mechanical Engineering with minimum 3 years of experience in underground utilities matter.
• Understand basic code compliance in Architectural, C&S and M&E works and construction sequence of work.
• Registered earthwork supervisor with EMA/SPPG and with relevant road construction experience.
• Positive attitude and good discipline and good team player
• Good interpersonal skills
• Preferred Candidate with LTA experience

Summary

The people here at Apple don’t just build products — they build the kind of wonder that’s revolutionized entire industries. It’s the diversity of those people and their ideas that inspires the innovation that runs through everything we do, from amazing technology to industry-leading environmental efforts. Asia Pacific Information Systems & Technology organization builds systems for the most dynamic and versatile business teams at Apple. We work on many high-impact projects that serve various Apple lines of business. We use the latest technologies and are constantly opening the boundaries. Our engineers have created some tough acts to follow, and they continue to lead us to innovative breakthroughs. Because they’re driven not by what would be easy, but by what would be amazing! Come join the Global Network Services team. The team that provides the underlying network infrastructure powering Apple’s business.

Description

Based out of Singapore, you will be part of a professional and dynamic operational team, responsible for the day-to-day support of Apple’s Enterprise Network infrastructure. We are rapidly growing and building the fastest and most reliable enterprise network that is needed for Apple’s immense scale and unique requirements. You will be working in a fast-paced environment while developing critical operational expertise to support an infrastructure environment that is stable and available to employees in our APAC offices and call centers. Possessing strong interpersonal skills, you are expected to work with many other cross-functional groups and vendors. You will need to obsess over the customer experience and drive operational excellence in everything that they do. The position requires extensive knowledge of network operations and designs, will partake in essential network augments, as well as assisting in new deployments to help Apple scale its product and service offerings.

Minimum Qualifications

• Minimum of 3 years of network operations and support experience.
• Solid understanding of TCP/IP (both IPv4/IPv6).
• Experience and knowledge of configuring ACL (Access Control List) is required.
• Knowledge & experience in networking technologies such as Ethernet, MPLS, IPSec, VLANs, HSRP, OSPF, BGP, QoS, Multicast, VPNs, VoIP, VxLAN, SD-WAN, and Structured Cabling etc.
• Demonstrated hands-on experience with Cisco, Arista, and/or Palo Alto network platforms.
• Knowledge and experience with network monitoring and management.
• Scripting knowledge using Python and using Ansible tool are highly regarded.
• Self-starter, self-motivated and a team player.
• Strong communication skills required to engage both local and global teams.
• Experienced in building relationship, fostering trust and engaging various teams.

Preferred Qualifications

• College degree (BA or BS) or relevant technical degree or equivalent practical experience preferred.
• Experience (3+ years) and progressive responsibilities within a global, multi-cultural, multi-location organization.
• Advanced vendor Network Certifications preferred.

Essential Functions (Responsibilities):

- Develop and grow key accounts in the Oil & Gas sector, Pharmaceutical and other industrial sectors contribute company growth objectives in Singapore.

- Provide technical sales support and consultation to clients for the sale of electrical products in order to develop business opportunities and penetrate clients.

- Perform all aspects of selling to maintain and develop new or existing customers including: take-offs, project quotations, closing orders, preparation of submittals and resolving customer problems.

- Meet or exceed budgeted sales and gross margin targets with assigned accounts.

- Focus on identifying specific technical requirements of customers while simultaneously collecting commercial and competitive information associated with each account

- Cultivate effective long-term relationships at all levels of the customer organization.

- Attain expert knowledge of products, electrical goods market and competition.

Qualifications/Requirements:

- Formal Electrical Engineering qualification (Diploma/Certification)

- Strong technical and commercial background.

- Minimum 1 to 2 years of proven sales experience to industrial customers

- Electrical product knowledge

- Very strong consultative selling, interpersonal, and negotiation skills

- Resourceful and results-oriented.

-Highly motivated, self-confident, self-starting work ethic with good networking abilities

- Team player who works well in global teams

- Good command of spoken/written English

- Have own car

** Package up to 55K a year **