Quality Controller (QC) contributes to the production operations by executing general manufacturing and packaging tasks to ensure that manufactured and quality checked products are packed and ready for delivery.

Job Description

• Ensure that the quality of all finished products are in alignment with the management’s / ISO standards as well as the QC checklist
• Maintain integrity, accuracy and completeness of QC data and records.
• Ensure the Operations Officer receives all void products in a timely manner.
• Ensure that workstations are neat, clean, tidy and in accordance to packing SOPs.
• Ensure that products are prepared, cut and packed in accordance to company’s specifications and quality.
• Ensure that all residues are thoroughly removed from the products without damaging its condition & quality.
• Ensure that quality and quantity of the products are met at all times

Requirements

• Minimally GCE 'N' Levels
• 2 years of relevant experience in the manufacturing sector
• Comfortable with performing repetitive tasks

Job Description:

• Contribute to Life Science projects for Antaes Asia clients
• Ensure products manufactured meet approved company policies, processes and procedures
• Provide quality oversight of GMP manufacturing and support, including technical operations, engineering, QC Laboratory and supply chain activities
• Review completed incoming material inspection packages, Batch Records, Manufacturing Logs, product changeover/ line-clearance activities and administration of Quality Logs, e.g. QA Hold, QA tag out
• Release incoming material, process and product batches.
• Participate in investigations, arising out of non-compliance in incoming materials, QC testing, manufacturing processes, warehousing and product
• Participate in change management, including change coordinator and/or QA oversight roles to ensure change plan is managed and complies with applicable polices
• Perform regular walk-thru of manufacturing, engineering, warehouse and QC areas as required to ensure compliance is maintained at all times
• Participate and support new product introduction, operation excellence projects and other tasks as assigned by team
• Contribute to the promotion of Antaes services on top of assistance provided to clients

Job Requirements:

• Bachelor’s Degree in Chemical Engineering, Biotechnology, Life Science or equivalent
• Minimum 2+ years of pharmaceutical, experience in Quality and/ or Compliance (GxP) environment
• Knowledge of quality/ compliance management as well as regulations and standard affecting APIs/ Biologics
• Ability to quickly know products and processes in order to assess quality issues
• Experience in SAP, Trackwise
• Candidate must be highly motivated, be able to work independently as well as in a team and have good organizational and oral and written communication skills
• Excellent communication skills, both written and verbal, in English

The Quality Assurance (QA) Specialist supports day-to-day QA activities at a multi-product, cGxP contract manufacturing facility. Key focus areas include Quality Systems, QA Validation and Technical Compliance, Quality Compliance (Audit/External), and Quality Operations. Potential candidates should show proven knowledge of cGMP, strong problem-solving, communication, and collaborative skills.

The scope of Services for the One (1) Onshore Quality Assurance/ Tester shall

be as follows:

a) Understand and document business processes, workflow and user story;

b) Perform checks under both functional and non-functional scopes of testing;

c) Review, develop and align test plan, test cases, scenarios and strategies,

ensure adherence to quality standards;

d) Perform manual and automated testing using Tricentis TOSCA, including

preparing test data when necessary;

e) Develop and maintain automated test scripts;

f) Review, support and participate in functionality and technical testing such as

performance testing, security, interface integration and usability testing;

g) Review test reports and results of the Authority’s appointed contractors for

the Authority’s systems;

h) Collaborate and coordinate with system stakeholders and Authority’s

appointed contractors for testing;

i) Review test process and recommend improvement, which includes analysing

test processes and methodologies, identify area for improvement and

recommend process optimisations and best practices; and

RFQ SPECIFICATIONS

j) Manage test activities and ensure the planned test activities are completed as

scheduled.

19. The One (1) Onshore Quality Assurance/ Tester proposed by the Contractor shall

have at least 3 years of experience as a Quality Assurance/ Tester or equivalent

position and the following skill sets:

a) Bachelor’s degree in computer science, Computer or Electronics

Engineering, Information Technology or related disciplines would be

preferred;

b) Certified Software Testing Professional and/or Certified Software Quality

Analyst will be an added advantage;

c) Strong analytical skills, meticulous attention to details, good interpersonal

skills such as tactfulness, good presentation and listening skills;

d) Experience in the following would be advantageous:

i. Automated testing tools such as Tricentis TOSCA; and

ii. Testing for government public services.

e) Good written and verbal communication and presentation skills, able to

interact professionally with all levels of the organisation.

Job Description

As a Quality and Compliance Specialist, you will play a pivotal role in ensuring that all products and operations within Project WATT meet regulatory requirements and quality standards. This role focuses on managing product certification, conducting regulatory audits, and ensuring that operational processes align with local and international laws. Collaborating with technical and operational teams, you will safeguard compliance while driving continuous improvement in quality management.

Responsibilities

• Product Quality Compliance:

1. Ensure that all products (hardware and software) comply with relevant regulations and industry standards, such as TR25 for EV charging systems in Singapore.
2. Maintain and update product certifications and manage regulatory audits and inspections.
3. Review testing results and performance reports to verify adherence to quality standards.

• Operational Compliance:

1. Oversee business operations to ensure alignment with legal and regulatory requirements, such as data privacy and environmental standards.
2. Develop, update, and optimize internal compliance policies and procedures to reflect current regulations.
3. Prepare and submit compliance reports, maintaining effective communication with regulatory authorities.

• Team Collaboration:

1. Work closely with technical teams, including Firmware Engineers and Integration Engineers, to validate the compliance of products and systems.
2. Provide compliance guidance and training to other teams to promote a culture of regulatory awareness.

• Risk Identification and Management:

1. Identify potential compliance risks and recommend actionable improvements to mitigate them.
2. Lead quality and compliance enhancement projects, ensuring continuous improvement in these areas.

Requirements

• A bachelor’s degree in Engineering, Quality Management, Law, or a related field, with at least 3 years of experience in product quality or compliance management. Equivalent professional experience will also be considered.
• Strong understanding of regulatory requirements for EV charging systems or IoT products, including certifications such as TR25.
• Experience managing audits and certification processes with regulatory bodies.
• Proven ability to collaborate effectively with cross-functional teams to ensure adherence to compliance and quality standards.
• Strong analytical and problem-solving skills with meticulous attention to detail in documentation and reporting.
• Knowledge of operational compliance standards, such as data privacy laws or environmental regulations, is a plus.

Reporting to:

Project Manager

Job description / responsibilities / activities/ tasks:

Interpret project specifications and develop project quality plan in consultation with project manager and Shell Quality Lead,

Implementation of quality assurance and control activities in accordance with the project quality plan including but not limited to:

· Establish Field QC Organization, to manage field QC group and members including assignment of EPCm and/or contractor QC Inspectors. To interview all EPCm and/or contractor QC before assignment to Project

· Coordination with EPCm (optional), other disciplines and contractor’s approval of the Field QC related documents prepared by each Contractor,

· Attend KOM & Pre-Inspection Meeting with EPCm and Contractors depending on criticality of works,

· Review Contractor documents related to quality control (E.g. ITP, WPS, PQR, test packs, NDE procedures) and ensure compliance to the Project Spec’s & applicable Code Standard,

· Organize and lead on-Site quality patrols and audits to ascertain health of Project quality systems, Control of NCR’s & Quality observation Records,

· Verify that all the required inspection and documentation are completed by the contractor / Vendor and issuance of the Inspection Release Notice (IRN) to the contractor / Vendor prior to any Site delivery,

· Perform line checking, punch-listing & killing, witnessing various types of tests such as hydrostatic & pneumatic testing and monitor coordination of Pre-commissioning, flushing activities,

· Final acceptance sign off on quality test packages

Trouble shooting of major QC related issues,

Prepare and conduct Project Lesson Learnt (LL) for projects done,

Carry out any other related duties as required, including temporary assignments in other sections within the MTAC department on site.

Qualifications/Experiences Required

Educational Qualifications:

· Diploma/ Degree in Mechanical Engineering or related discipline

Technical Qualifications:

· Valid Certified Welding Inspector (CSWIP 3.1) or equivalent

· Qualified MOM OPSOC (Supervisor) or equivalent

· ASNT qualification is a bonus

Professional Experience:

· Minimum 20 years of relevant experience in oil & gas, chemical & petrochemical industry in the below fields:

o Project Quality Management Systems

o Brownfield construction

o Civil, Steel Structure, Piping/Pipeline Construction

o Application of Protective Coatings (Organic Coatings, fireproofing)

o Non-metallic piping systems.

· Relevant experience includes:

o Set up and execution of Project Quality Plan

o Workshop and field quality assurance and control

o Leading EPCm and Contractor quality teams in flawless delivery

· Experience in Plant Turnaround Project Quality planning, preparation and execution.

· Conversant with international codes and standards such as ASME II, ASME V, ASME VIII, ASME IX, ASMEB31.1, ASME B31.3, AWS D1.1, API 1104, API 650 & 620, ASTM, SHELL DEPs

Qualification: Degree in Engineering preferably Chemical or Mechanical or Diploma with min 5 years Quality experience.

Job Requirements: Minimum 5 years working experience in manufacturing environment preferably in Quality. Knowledge of ISO 9000, ISO 14001 and ISO/TS 16949 Computer Literate. Able to work independently and a team player.

Reporting Level: Quality Engineering Manager/ Artwork and OF Manager

Duties and Responsibilities:

1.1. To support the Quality Manager to meet the company objectives and goals.

1.2. Manage activities of incoming inspection to assure that materials used meet quality requirements

1.3. Oversee the product inspection activities within the company and QA activities within the department.

1.4. Overseeing outgoing inspections to ensure products meet customer requirements, including 100% firewall activities.

1.5. Developing, reviewing, and approving quality control methods and procedures to ensure that products meet customer specifications

1.6. Conduct training sessions for staff on quality standards, procedures, and best practices.

1.7. Manage and maintain quality documentation; and Prepare and review quality reports, metrics, and key performance indicators (KPIs)

1.8. Handling and managing customer complaints, coordinating with relevant departments for resolution, and ensuring timely responses to customers.

1.9. Prepare and manage corrective and preventive action reports (e.g., 8D reports) or relevant report(s) to customer.

1.10 Develop and initiate quality improvement programs, coordinating with internal departments and external parties (e.g., suppliers) to ensure successful implementation and measurable improvements.

1.11 Implement and uphold quality, environmental, and safety management systems such as ISO 9001,IATF 16949, ISO 14001, and applicable safety regulations. Represent management as Quality Management Representative (QMR) or Environmental Management Representative (EMR) in

these systems' implementation and maintenance.

1.12 Promote quality, environmental awareness.

1.13 Manage the activities of the Document Control Center.

1.14 Ensure that all measuring and test equipment are calibrated and in good condition as required.

1.15 Manage the handling of non-conforming products by stopping processes if necessary and ensuring that deficiencies are addressed and corrected before resuming production.

1.16. Assist the Quality Manager in strategic planning and decision-making and Provide input for setting quality objectives and goals.

1.17 Undertake additional tasks or responsibilities as directed by a superior.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

JD:

Should have at least 3 years of experience as a Quality Assurance/ Tester or equivalent

position and the following skill sets:

a) Bachelor’s degree in computer science, Computer or Electronics

Engineering, Information Technology or related disciplines would be

preferred;

b) Certified Software Testing Professional and/or Certified Software Quality

Analyst will be an added advantage;

c) Strong analytical skills, meticulous attention to details, good interpersonal

skills such as tactfulness, good presentation and listening skills;

d) Experience in the following would be advantageous:

i. Automated testing tools such as Tricentis TOSCA; and

ii. Testing for government public services.

e) Good written and verbal communication and presentation skills, able to

interact professionally with all levels of the organisation.

Roles & Responsibilities:

a) Understand and document business processes, workflow and user story;

b) Perform checks under both functional and non-functional scopes of testing;

c) Review, develop and align test plan, test cases, scenarios and strategies,

ensure adherence to quality standards;

d) Perform manual and automated testing using Tricentis TOSCA, including

preparing test data when necessary;

e) Develop and maintain automated test scripts;

f) Review, support and participate in functionality and technical testing such as

performance testing, security, interface integration and usability testing;

g) Review test reports and results of the Authority’s appointed contractors for

the Authority’s systems;

h) Collaborate and coordinate with system stakeholders and Authority’s

appointed contractors for testing;

i) Review test process and recommend improvement, which includes analysing

test processes and methodologies, identify area for improvement and

recommend process optimisations and best practices; and

j) Manage test activities and ensure the planned test activities are completed as

scheduled.

Responsibilities:

• Validation quality review of lifecyle documents and protocols for Automation CSV qualification, EFU qualification, cleaning validation, laboratory equipment qualification, and IT systems qualification.
• Review and approve validation lifecycle document and protocols/reports in accordance with relevant policies, standards, procedures and guidelines timely
• Review and approve as needed, qualification/validation executed package validation exceptions, deviation, and investigations encountered during qualification/validation representing Quality
• Collaborate with multi functions to arrange, plan and ensure smooth running of the qualification/validation activities
• Participate in site Validation Maintenance Program
• Any other tasks as and when assigned by supervisor
• Support other technical changes and duties as require

About You:

• Diploma/Bachelor/Master/Doctoral Degree in Engineering/Science
• At least 5 years qualification/validation experience
• Possess process automation experience will be the additional benefit to be considered
• Communicate well, self driven, motivated and able to work well with others
• Based in Tuas

Job Type: Contract

Contract length: 9 months

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Automation Electronics Manufacturing Company

Job Scope

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirement

• Degree in Electrical Engineering / Electronics Engineering or related disciplines
• 2 to 4 years of relevant experiences and roles in Industrial Automation

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Position Summary

This position is involved in Supplier Quality activities that improve, monitor and measure Illumina’s compliance with the Quality System Regulations, Illumina Quality policies, FDA regulations and ISO standards as well as Illumina product quality for current operation and compliance objectives.

Responsibilities:

• Support qualification of new Suppliers and Partners for materials and services including risk assessments, audits and other supplier on-boarding activities
• Provide support to investigation teams in determining root causes on material quality issues and initiate/ensure corrective and preventive action plans are developed and executed
• Interface with Suppliers/CM (Contract Manufacturer), Engineering / Manufacturing / Quality Assurance / Procurement departments to drive for quality improvements, specifically on incoming rejects, workmanship defects and primitive failures
• Participate in Quality review activities with supplier/CM to identify improvement opportunities to meet quality expectation
• Compile, evaluate and report on supplier/CM quality performance metrics for scorecard and monitoring
• Monitor to ensure supplier’s preventive and corrective actions are implemented and effective
• Participate with NPI team in selection of new suppliers

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Bachelor’s Degree in Engineering, Life Sciences, or related field with 1-3 years of relevant experience
• Experience in driving suppliers to improve quality performance
• Experience in conducting supplier audits
• Good understanding of FDA regulatory environment (CFR 820), 501k and ISO 13485 strongly preferred.
• Experience in medical device / pharmaceutical / IVD is preferred
• Developing basic knowledge of quality tools
• Beginner to intermediate experience with Microsoft tools and spreadsheets, charting, graphing tools and presentation tools.
• Experience with electronic production life (PLM), enterprise resource planning tools (SAP) and etc are preferred
• Experience with statistical analysis packages, eg, JMP, Minitab are preferred
• Detailed oriented, well organized and able to work independently and in teams.
• Good communication and collaboration skills
• Ability to travel as needed

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Our esteemed client, an established MNC, is searching for a Control Room Assistant:

Job Responsibilities:

• Monitor and oversee the performance of control room systems, ensuring equipment and systems function effectively.
• Maintain accurate records of system performance, incidents, and maintenance activities.
• Provide administrative support and handle ad-hoc duties as assigned.
• Ensure adherence to operational protocols and safety procedures within the control room.
• Collaborate with other departments to escalate and resolve issues efficiently.

Job Requirements:

• Minimum GCE O Level or equivalent qualification.
• Strong attention to detail and the ability to identify and report issues promptly.
• Basic computer proficiency with familiarity in monitoring systems or equipment.
• Good communication skills with a proactive and problem-solving mindset.

Additional Information:

• Salary: Up to SGD 2,600 + VB ( 1 Month )
• Working Location: Tuas Crescent
• Working Hours: Monday to Friday 8:00am - 6:00pm
• Meal will be provided

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Responsiblities

a) Manage asphalt premix production quality control processes;

b) Conduct regular inspections and testing;

c) Analyse test results and implement corrective actions;

d) Maintain quality control records and documentation;

e) Train production staff on quality control procedures;

f) Collaborate with production and laboratory teams;

g) Develop and implement quality improvement initiatives;

h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:

· Cooperate with employers and follow safety and health procedure;

· Report unsafe acts and incidents;

· Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

· Diploma / Certificate in Asphalt Technology or related fields

· Preferably with relevant experiences

· Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)

· Strong analytical and problem-solving skills

· Excellent communication and interpersonal skills

· Ability to interpret test results and make informed decisions

· Familiarity with quality management systems (ISO 9001)

· Proficient in Microsoft Office and laboratory software

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Responsibilities:

• Develop, implement, and maintain the IT Technology Governance and Control framework, policies, and processes, including process implementation and tools development. Focus areas include IT System Development and Maintenance, IT Service Management (ITSM), IT Assets Management (ITAM), IT Security and Operations, with a strong emphasis on Identity Access Management (IAM) for the Singapore Branch and across APAC Branches.
• Establish IT Control objectives aligned with regulatory requirements (e.g., MAS TRMG, BNM RMIT) and the bank’s internal IT procedures.
• Ensure compliance with the bank’s IT Governance policies and procedures, initiating support initiatives to strengthen the governance framework. This includes conducting system risk assessments with IT system owners for enhancements or new system onboarding.
• Collaborate with APAC branches to standardize processes and procedures, reviewing IT-related documents such as Procedure Manuals and Guidelines.
• Conduct regular compliance checks on IT controls in Project Management, IT Security, and Operations, identifying and remediating non-compliance areas with stakeholders.
• Identify and implement IT improvements for enhanced productivity, controls, and efficiency.
• Act as a Subject Matter Expert on Identity Access Management (IAM), designing and implementing a comprehensive framework covering identity management, access control, and privileged access management.
• Provide leadership and guidance to technology teams to ensure adherence to IAM policies and procedures, including user access management, identity verification, and security controls.
• Oversee the implementation of an effective IAM toolset (e.g., SailPoint), ensuring appropriate access provisioning and timely de-provisioning, along with periodic reviews to prevent unauthorized access.
• Review and assess user access matrices (UAM) for systems, ensuring proper segregation of duties in collaboration with IT system owners.

Job Requirements:

• Bachelor’s degree in IT or equivalent, with a minimum of 5 years' experience in IT Governance and Control, ideally within Financial Services.
• Strong leadership and people management skills, with experience in IAM and IT Auditing preferred.
• Subject Matter Expertise in Identity Access Management, particularly in system and user access control management.
• Ability to identify risks in processes and develop effective control measures.
• Solid technical and functional knowledge of regulatory and compliance requirements, with practical application experience.
• Collaboration skills across HQ, APAC branches, and Singapore teams.
• Proficiency in industry standards and trends relevant to IT Governance.
• Strong decision-making and problem-solving skills, with a structured and logical approach to work.
• Ability to manage large workloads, prioritize tasks, and meet deadlines.
• Experience in IT Governance Reviews, Controls Testing, Assurance, and training delivery.
• Excellent communication, presentation, and interpersonal skills.
• Preferred experience with JIRA (workflow management) and ServiceNow (ITSM/ITAM).

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

A CNC Operator has many duties and responsibilities in any field of production. Some things expected of a CNC Operator daily include:

• Read and understand blueprint designs
• Set up machinery for production
• Rework metal to create the blueprint design
• Measure and verify all calculations prior to setting up the machinery
• Maintain a clean and organized working environment
• Complete routine maintenance of their machinery
• Enter all relevant codes to specify the feed, speed, and cut of any toolpath for a CNC

We are seeking a skilled CNC Programmer to join our team and play a vital role in our manufacturing process.

Responsibilities:

Analyze and interpret engineering drawings, technical documents, and production routings to ensure accurate understanding of part specifications.

Utilize Mastercam software to develop efficient CNC programs for milling operations.

Generate detailed setup sheets, tool lists, and process sheets for production reference.

Create CNC programs for horizontal and vertical milling operations using Fanuc controls.

Design and fabricate simple tools and fixtures to optimize machining processes.

Troubleshoot and resolve program errors or machine malfunctions.

Continuously monitor and improve production cycle times and associated costs.

Organize and archive all CNC programs for efficient retrieval.

Foster a collaborative and team-oriented environment to enhance both productivity and product quality.

Strictly adhere to all safety regulations and guidelines to maintain a safe work environment.

Qualifications:

Proven ability to interpret and understand 2D and 3D drawings.

Experience setting up and operating both CNC and conventional milling machines.

Proficiency in Mastercam software for CNC programming.

Minimum of 1-3 years of experience in a related manufacturing environment (preferred).

Fluency in both Chinese and English (essential).

We offer a competitive salary and benefits package. If you are a highly motivated individual with a strong attention to detail and a passion for manufacturing, we encourage you to apply!

About the Position

SRS is currently seeking an enthusiastic, highly motivated, and capable Security Control Center Supervisor to join one of its most prestigious contracts in Singapore. The selected candidate will be exposed to a high-performance environment that is fast-paced, and dynamic; supporting the round-the-clock operations at the dedicated APAC Security Control Center.

Roles and Responsibilities:

• Report directly to the ASCC Manager and work in a team of other Supervisors, Specialists, a Security Systems Supervisor and an Intel Analyst.
• Oversee workflow, monitor and account for performance of ASCC Specialist.
• Exercise level of leadership, management and supervision.
• Ensure all functions of the APAC Security Control Center are carried out in an efficient and effective manner whilst providing maximum security support.
• Manage and coordinate security communications operations ensuring that security procedures are implemented and followed as per the ASCC Procedures (SOPs);
• Ability to perform well and maintain a high degree of professionalism and service on a routine basis, during emergency situations or under extreme pressure;
• Coordinate the daily development and dissemination of intelligence and operationally based reports to support our Global Security and regional business partners.
• Support 24/7 scheduling and coverage for the ASCC;
• Coordinate and support emergency and crisis management assets providing a timely and coherent response to incidents as they arise;
• Liaise with Regional Security Managers, Regional Intel, Regional Ops, Risk and Crisis Management and all other required company personnel to ensure that all relevant security information is disseminated in a timely manner.
• Develop a comprehensive working knowledge of all ASCC programs and procedures;
• Partner with and communicate with global security partners to conduct tactical security assessments as required, and where necessary provide feedback on proposed mitigation strategies for country and regional specific threats;
• Execute the design and implementation of project related security strategies, security policies/ standards and establish a concrete course of action for their implementation and review;
• Provide support by monitoring open sources for breaking news and current events that affect the company, its employees, and guests across Asia Pacific.
• Liaise with regional security partners to ensure that training procedures and policies are implemented within acceptable standards;
• Maintain close links with key stakeholders to ensure that all projects are implemented with the highest degree of professionalism safety and security;
• Offer management and tactical guidance.
• Support development of policy, procedures and protocols for future ASCC operational and technological integrations.
• Serves as the first responder for information by assisting employees domestically or internationally with security- or travel-related emergencies;
• Have a full understanding of the functions, roles and systems used at all sites, such as Security, Incident management & escalation, CCTV, etc.
• Provides excellent support to regional guests and employees.
• Perform other duties as assigned by ASCC Management staff or other approved Global Security management.
• Assist in the effective implementation of the regional employee travel safety and security program.
• Ensures proper distribution of notification via our Emergency Mass Notification System (i.e. Everbridge).
• Work as part of a rotating 8-hour shift schedule and ensure continuous functioning of the 24/7 center.

Basic Qualifications

• Minimum 3 years’ experience working with or in a Communications or Operations Center related operation
• Bachelor’s degree in International Relations, Strategic/Security Studies, Political Science, Business or a related discipline, or any closely related field of study
• Strong interpersonal skills
• Supervisory experience in a related field desired
• The ability to receive and relay direction, and have ability to multi-task and coordinate several incidents at once
• Experience in report writing which may include incident/event analysis, regional risk and business impact analysis
• Ability to communicate effectively with all levels of personnel including key company executives
• Strong service/interpersonal skills especially during times of crisis
• Strong interest and familiarity with international current events
• Familiarity with tools such as Everbridge (VCC), Intel tools, access control and surveillance tools, etc. is strongly preferred
• Ability to make critical decisions, prioritize issues and initiate appropriate response with minimal supervision
• Sense of urgency in a 24/7 work environment for quick response to critical developing issues

Candidates with the following competencies and personal attributes are preferred:

• Master’s degree is preferred or equivalent work experience is considered
• Familiarity with tools such as Everbridge (VCC), Intel tools, access control and surveillance tools, etc. is strongly preferred
• Added advantage to have a foreign language capability

If you're interested in the above "APAC Security Control Center Supervisor" role, you may reach out to [email protected] or click on the 'Apply' function now!

A CNC Operator has many duties and responsibilities in any field of production. Some things expected of a CNC Operator daily include:

• Read and understand blueprint designs
• Set up machinery for production
• Rework metal to create the blueprint design
• Measure and verify all calculations prior to setting up the machinery
• Maintain a clean and organized working environment
• Complete routine maintenance of their machinery
• Enter all relevant codes to specify the feed, speed, and cut of any toolpath for a CNC