Job Description:

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements:

• Minimum Diploma or Degree in Chemistry, Food Science and Technology, Analytical Chemistry or equivalent in years of similar experience.

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

We are a North Indian Restaurant located at Tanjong Katong Road, Singapore. We have a vacancy for a Quality Control Supervisor for Food Services.

You should be conversant with North Indian Cuisine; both tandoori and curries. We specialize in traditional recipes and styles of cooking. You should be aware of 'Bhapa’ (steaming), ‘Bhunao’, ‘Dum’, ‘Talna’ (frying), ‘Sambaar’ (tampering), ‘Sekhna’ (pan roasting) techniques of cooking in order to conduct quality checks.

You should also be conversant with traditional beverages like Shikanji, Kaanji, Lassi, in order to ensure quality.

Your job scope will be:

• Manage and Conduct quality checks for Restaurant Service and Food Delivery.
• Manage and Conduct quality checks for BBQ and Catering Services.
• You will be reporting to the Restaurant Manager.
• You will be responsible to maintain top quality standards in the restaurant and hygiene to achieve an A rating from SFA and follow all safety standards.

We work six days a week, split shit (two-hour afternoon break) and forty-four hours a week. Subject to your consent, you will be expected to work on Public Holidays. Monday is an off-day and weekends are busy workdays.

Accommodation, transport and meals shall be at your cost.

Your appointment contract will be as per MOM rules and guidelines.

We are hiring Quality Control Specialist to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Scope

• Project management: analytical, raw material and microbiological method introduction and analytical equipment qualification
• Assist in regulatory filing and method launch
• Helping out in invalid results tracking, trending and investigation
• Conducting unexpected results investigation
• Control trend establishment and investigations
• Reference standard and reagent qualifications
• Conducting compendia review
• Assisting in audit preparation and involvement and other tasks as assigned.

Job Requirements

• A minimum experience of 3-5 years in Pharmaceutical, Biopharmaceutical or related manufacturing environment.
• Six Sigma Greenbelt training would be helpful.
• Demonstrated experience e.g. in the area of method validation, method transfer, method verification.
• Demonstrated ability to collaborate with cross functional or cross sites to achieve objectives.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

* Cleaning service

* Location: Changi Airport

* 5.5days

* 8:30am - 5:30pm

Job Description:

• Collaborate with the Resident Manager & Assistant Managers to establish standard operating procedures for ground operations.
• Inspect daily tasks performed by ground staff.
• Employ a coaching approach to reinforce SOPs with ground staff: supervisors and housekeeping staff.
• Mentor new staff during orientation.
• Implement skills enhancement programs for ground staff to boost performance.
• Update training schedules for cases of non-conformance and monitor improvements to bridge skills gaps.
• Coordinate and conduct training sessions on safety, quality, and environmental subjects.
• Undertake any other assigned ad-hoc tasks by the Manager.

Job Requirement:

• Possess a minimum Diploma/Degree in a relevant field of study and be open to training.
• Proficient in Microsoft Office applications (Excel, Word, etc.).
• Capable of working independently and thriving under pressure.
• A team player who can handle multiple tasks in a fast-paced setting.
• Willing to work shifts and overtime occasionally.
• Good communications skills are preferred.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

As a Senior Industry 4.0 (I4.0) Analyst at Micron Technology, Inc., you will report to the Smart Manufacturing and Artificial Intelligence organization. The team defines, drives and delivers end to end smart manufacturing solution, integrated across functions of the business. The team will investigate applying industry-leading the best methodologies in automation, AI and machine learning to enhance Micron’s product development, business, and administrative processes across the company.

Responsibilities and Tasks

• Lead the analysist for complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences.
• Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge.
• Creates specifications for reports and analysis based on business needs and required or available data elements.
• May provide consultation to users and lead cross-functional teams to address business issues.
• May directly produce datasets and reports for analysis using system reporting tools
• Understands business problem and translates user requirements into technical language and vice versa for data science / technical solution / IT teams.
• I4.0 Analyst with strong domain knowledge is preferred and will bridge the gap between users and developer team
• Accountable to ensure modules / functionalities address current metrics gaps and new business opportunity
• Translating project expected project metrics gain into dollar values, partnering with Finance
• Defining priority for projects for strategic pillar roadmap provided by Strategy Pillar Leader
• Conduct diagnostic and understand gaps and areas of improvement in current IIoT solutions and ways of working
• Work with PDE, Data Scientist, System Architect and IIoT end users to design & define requirements and analyze information, production interdiction that related to the adoption of IIoT for Smart Manufacturing
• Ensure optimization and standardization of tools and processes leveraging central team business partners to allow I4.0 solutions to be scaled sustainably across Micron Backend sites
• Develop business case, including impact validation approach, ROI of potential solutions and prioritize & propose projects for implementation
• Lead projects and activities that will require the coordination, support, and management of resources from global teams
• Provide expert functional and process guidance on system interfaces and capabilities

Qualifications

• Master/Bachelor's Degree in Electrical Engineering, Specialized in Data Analytic.
• At least 5-7 years of work experience in Assembly & Test and Post Wafer Fab (PwF) Process & Equipment Engineering or similar operations functions, good knowledge in High Bandwidth Memory (HBM) production is preferred
• Familiar with Composite Metro solution development, systems and solutions for high volume and high mix production environment
• Good interpersonal skills with demonstrable ability to effectively lead and present to small and large groups
• Proven ability to work multi-functionally with peers, senior and mid-level management
• Peer leadership and relationship management skills
• Strong analytical and problem-solving skills
• Highly organized and ability to remain flexible to the changing business needs

About Micron
As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and High Bandwidth Memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Analyzes complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences. Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge. Creates specifications for reports and analysis based on business needs and required or available data elements. May provide consultation to users and lead cross-functional teams to address business issues. May directly produce datasets and reports for analysis using system reporting tools.

KEY DUTIES AND RESPONSIBILITES:

· Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.

· Preparation of reagents/diluents/ dissolution media as per STP.

· Perform a various qualitative tests or qualitative assays on samples using modern and automated instrumentation.

· Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.

· Ensure implementation of SOP for all corresponding activities.

· Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.

· Ensure real time documentation, maintain data integrity and appropriate traceability.

· Assist in maintenance and calibration of test instruments per specifications.

· Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.

· Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.

· Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.

· Responsible for QC lab and equipment/instrument cleanliness.

· Responsible for procuring and receipt of QC lab glassware and consumables.

· Any other activities as and when assigned by the Superior.

EDUCATION:

· Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering).

EXPERIENCE:

· (Specialist) Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.

· (Analyst) Fresh grad/ 1-2 years of quality control experience in pharmaceutical manufacturing industry.

KNOWLEDGE & SKILLS:

· Possess working knowledge of GMP in the pharmaceutical industry.

· A good team player with positive learning attitude.

· Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

Job description:
• Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications.
• Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.
• Maintain the control of the manufacturing environment and perform gowning as necessary.
• Perform recording of inspection data, monitoring data and other data in accordance to Records Control requirements.
• Perform other tasks as assigned by the supervisor.
• Work experience as an quality inspector.

Candidate Profile & Requirements:
• Candidate must possess at least a Secondary School/"O" Level, Higher secondary/PreU/A level/College,Professional Certificate/NiTEC, any field.
• At least 2 years of work experience as inspector in a machine shop.
• Proficient in regular measurement instruments. Capable of operating CMM is an advantage.
• Able to read and understand engineering drawings and GD&T.
• Good interpersonal skills; organized; self discipline.

Job description

Non-Destructive Testing (NDT) technicians examine structures, vehicles, and products for flaws and structural weaknesses using non-destructive testing techniques. They conduct material tests, interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering, or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound, infrared, and radiographic.

About the Job

The Quality Department plays a very important role in Cyrus in maintaining the quality management system and driving quality improvements to deliver high quality products for our customers. You will be working closely with the Assistant Quality Manager on Quality Management System (QMS) and suppliers’ management.

Your key responsibilities are as follows:

- Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review.

- Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits.

- Coordinate with internal stakeholders to participate in customer or supplier audits for compliance

- Review audit findings and develop action plans to drive continuous improvements.

- Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement.

- Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure.

- Support the qualification of new suppliers to maintain a healthy pipeline of qualified suppliers to meet Cyrus production requirements.

- Maintain and conduct regular review of calibration and preventive maintenance for equipment.

- Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.

- Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.

- Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.

- Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.

Your areas of knowledge and expertise that matter most for this role:

· Diploma in quality management / Engineering / Manufacturing or related field

· Minimum 3 to 5 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.

· Knowledge in Supplier Management

· Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301.

· Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

· Familiar with 8D and 5W problem solving methodology.

· Good communication and presentation skills

· Organized and detail oriented.

· Positive attitude with ability to multi task.

· Independent, takes initiatives and able to work with minimum supervision.

· Good team player with good initiatives and ability to work independently.

Job Requirements:

• Degree in Information Technology or equivalent.
• Must have minimum 4-6 years of experience in Software Quality Testing with hands-on experience in Automation Testing.
• Experience with open-source automated testing frameworks such as Cucumber, TestNg and Playwright.
• Experience with open-source performance testing tools such as JMeter, Gatling, Locust or enterprise level tools such as HP LoadRunner
• Experience with open-source penetration testing tools such as ZAP, Burp Suite, SQL Map or enterprise level tools such as HP WebInspect, Nessus, CheckMarx.
• Must have strong understanding of testing techniques, risk analysis, test-driven development, continuous integration and continuous delivery.
• Must have proficiency in programming languages such as Java or Kotlin with good to have knowledge in Springboot.
• Experience working in SCRUM teams.
• Excellent written and verbal communications skills

Job Description

· Maintain and upkeep AS 9100 and ISO 45001 requirements and procedures

· Conduct Internal Quality/ Process Audit and attend to external audit needs.

· Manage/ Perform and fulfil customer quality requirements includes document and reports submission.

· Manage First Article requirements which includes CMM programming.

· Quality Methodology – Training Material or past Stimulated Results will be used.

· Prepare and submission of Quality KPI.

· other duties assigned by the superior

Job Requirements:

· Min Diploma in Mechanical or equivalent

· Able to work independently.

· Knowledge in AS9100

· Good knowledge in Engineering Drawing Interpretation and GDT.

· Experience in CMM operations will be advantage added.

Responsibilities

• Communicate and reconcile quality / technical matters to various stakeholders.
• Investigate supplier non-conformance, drive root cause analysis, discuss corrective actions and implement process improvement, including source inspection.
• Work with suppliers to ensure their manufacturing processes comply with customers’ expectations.
• Monitor non-conformance performance and collaborate with suppliers to drive continuous improvement in supplier’s quality.
• Maintain and improve product quality by completing product and compliance audits.
• Prepare and review monthly data to analyse quality issues.
• Process engineering changes (ECN).
• Maintain customer’s claims system.
• Maintain calibration process for Shimadzu’s equipment.
• Ad-hoc duties as assigned.

Requirements

• Diploma or degree in supply chain management, engineering or science.
• At least three years of experience in quality engineering or related role.
• Having experiences in mechanical engineering or related field will be advantageous.
• Possess good communication skills and able to articulate ideas succinctly to local and international stakeholders.
• Possess a good analytical mind, positive attitude and patience under challenging situations.
• Having a tenacious desire to solve challenging technical problems will be a distinct advantage.
• Possess a good organizational skill and a strong penchant for neatness.
• Possess a high level of proficiency in Microsoft Office and Microsoft 365.
• Able to work independently and a good team player.
• Possession of a Class 3 driving licence is preferred.

We regret that only shortlisted candidates will be contacted.

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Microbiology and Biochemical Product Testing:

• Perform EM such as active air sampling, surface and passive air samplings, plate readings and inspection of cleaned facility and sterilised equipment
• Responsible for planning,monitoring and approving microbiological testing
• Perform method Qualification,validation and product testing (e.g. sterility and endoxin) to support QC lot release.
• Perform stability testing of released final products as per protocol and timelines.
• Support assessment of certification/accreditation and services provided by external labs for QC testing.
• Knowledge in biochemical testing, including cell counts, flow cytometry, ELISA, PCR analysis, and compendial testing (pH, Appearance) as per USP, JP, and EP standards

Documents, Records and Data Management:

• Drafting and updating of Standard Operation Procedures (SOPs) and specification documents for EM, equipment, sampling plan, test methods, final products and raw/packaging materials.
• Author and review technical protocols and reports (e.g. EM risk analysis), develop guidelines and standard practices for data documentation, analysis and training.
• Review test results, document data and produce trends (e.g. EM) in an efficient, organised and presentable manner to facilitate discussions, support business and performance metrics reporting.

Deviations, Change Control and Audits Management:

• Support deviations (e.g. test OOS, EM excursion) initiation, investigations and root cause analysis for product defects and quality lapses.
• Support change control and CAPA implementation.
• Support internal and external audits/inspections.

Equipment and Lab Management:

• New equipement commisihing support( Operational qualification-OQ, Performance qualification- PQ
• Monitor and schedule equipment calibration and maintenance as per schedule and site master file.
• Perform lab housekeeping, lab cleaning and biohazard/waste management.
• Perform monitoring and procurement of lab inventory, for e.g. materials and consumables.

Continuous Improvement:

• Implement initiatives to encourage improvement of QC procedures, activities and workflows.
• Conduct routine literature review through established publication channels to ensure continual knowledge proficiency on both GMP and current technological trends relevant to CellVec’s activities.

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible for ensuring quality control in semiconductor manufacturing processes, managing engineering changes, resolving production issues, and driving continuous improvement.

Key Responsibilities :

• Develop, implement, and maintain quality control measures for semiconductor manufacturing processes.
• Monitor production data to identify trends and initiate corrective actions to improve yield and reliability.
• Review and validate quality systems and specifications for new equipment and processes.
• Ensure smooth integration of new technologies into the production line with a focus on maintaining quality standards.
• Manage quality control for engineering changes in wafer fabrication, including reviewing change requests, conducting risk assessments, and ensuring compliance with quality standards.
• Oversee the quality of incoming masks through inspections and audits.
• Collaborate with mask suppliers to identify quality issues, implement corrective actions, and drive continuous improvement initiatives.
• Lead the response to major abnormal events in the wafer fab, including root cause analysis and corrective actions.
• Manage RMAs and work with customer quality teams to resolve issues and improve customer satisfaction.

Education Qualification & Essential Experiences:

• Education: Bachelor's degree or higher in Electronics, Physics, Materials Science, or other related engineering fields.
• At least 5 years of relevant work experience.

Personal Attributes:

• May need to travel to Taiwan for a training period lasting 6 to 9 months.
• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

* Cleaning service

* Location: Changi Airport

* 5.5days

* 8:30am - 5:30pm

Job Description:

• Collaborate with the Resident Manager & Assistant Managers to establish standard operating procedures for ground operations.
• Inspect daily tasks performed by ground staff.
• Employ a coaching approach to reinforce SOPs with ground staff: supervisors and housekeeping staff.
• Mentor new staff during orientation.
• Implement skills enhancement programs for ground staff to boost performance.
• Update training schedules for cases of non-conformance and monitor improvements to bridge skills gaps.
• Coordinate and conduct training sessions on safety, quality, and environmental subjects.
• Undertake any other assigned ad-hoc tasks by the Manager.

Job Requirement:

• Possess a minimum Diploma/Degree in a relevant field of study and be open to training.
• Proficient in Microsoft Office applications (Excel, Word, etc.).
• Capable of working independently and thriving under pressure.
• A team player who can handle multiple tasks in a fast-paced setting.
• Willing to work shifts and overtime occasionally.
• Good communications skills are preferred.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

This position is responsible for conducting audit checks to ensure that products meet the established standards, This role also supports the achievement of Company quality target.

1. Confirm to quality standard and quality processes

• Inspect in-coming and outgoing products according to policies standard.
• Perform all product processes within section (eg, QC,SAO), Reworks, Repairs, Defective photo-taking

2. Contribute to continuous improvement

• Maintain Integrity accuracy and completeness of Supplier invoice data and QC data in system
• Establish standard operating procedures and conditions for handling storage and checklist of stock.

3. Perform other ad-hoc duties as assigned.

Requirements

• At least 1 year of experience in Gold quality control in retail jewellery preferred
• If no QC experience in retail jewellery then at least 1 year of experience in QC control in manufacturing
• At least Diploma in any discipline
• Basic understanding of production methods.
• Attention to detail
• Able to use basic MS Office.
• Good Communication and Interpersonal Skills
• Able to multi-task and quick learner