Cost Controller Executive

Summary of Responsibilities:

The main responsibilities and tasks of this position are as listed below, but not limited to these:

• To calculate the recipe cost based on the input from the Chef / Bartenders 
• Check the ingredients of the recipe – the quantity, the code, the cost price, the loss factor  
• To calculate the potential beverage cost for every bars/outlets – either based on the recipe cost or item price  
• Calculate the cost of event based on Banquest Beverage Control 
• To ensure in absence of POS system, the manual system’s compensating controls should include a chit system for all food orders sent to kitchen or bad for preparation/creation 
• To ensure creation for new/change of Discount Key must approve by Director of Food & Beverage, Director of Finance and Hotel Manager before creation. Outlet Manager must submit printed test check after key created. ( As Operationly Required) 
• To update Menu Engineering for all F&B outlets as followss 
• Revenue as per Sales Report from Point of Sales System  
• Cost as per on the Recipes provided by Chefs 
• Conduct stock take in the kitchens, bars, resturant, Food Store, Beverage Store, Tobacco Store and Wine Cellar 
• Involve in monthly Stocktaking for outlet and Store. Perform reconciliation for the Store inventory to zero variance end of day 
• Compile inventory summary for the hotel to facilitate month end closing and follow up with approval from Director of F&B, Director of SPA and Director of Finance to ensure full compliance with FRHI standard 
• To assist Cost Controller in F&B Flash Cost Report preparation twice a week. The task include Purchases and Store requisition compilation; Inter Kitchen Transfer; Inter Bar Transfer; Accrual and Food Credit (FAR Discount and S&P).  
• Invlove in F&B Cost Analysis for month end closing
• Compile and audit Daily Adjustment Report (F&B Discount) and follow up with the Cashier and Outlet Manager if there is any mistake/discrepancy to ensure timely submission of Daily Operation Package  
• Compile and audit Daily Micros POS Void Checklist and follow up with the Cashier and Outlet Manager if there is any doubtful transaction otr typical wrong posting to ensure compliance of Key Control Point and timely submission of Daily Operation Package  
• Support the Receviving operation that may be assigned from time to time.

• Serve as the Test Manager, comprehensively understanding business requirements for the Core Banking System, Fund Transfer, and other related banking systems, ensuring all testing in alignment with the requirements
• Responsible for conducting IT software testing
• Collaborate closely with various stakeholders to ensure effective and efficient teamwork throughout the testing process.
• Key stakeholders include: End users, system development teams, and back-office departments from the head office Test support teams from other IT vendors and Offshore vendors

Qualifications:

• Bachelor’s degree in Information Technology, Computer Science, or a related field with a minimum of 5 years of experience supporting IT project test phases within the banking sector.
• Experience in IT software testing, with prior experience as an IT professional in a banking or financial institution will be advantageous.
• Lead the creation of test plans and test definitions for banking IT systems, demonstrating knowledge in software quality management including software testing methodologies, including the creation of test plans, test documentation, execution of test cases, and analysis of test results.
• Experience in managing risk and control processes, including timely escalation and resolution of significant issues to management.
• Proven experience in collaboration, teamwork, and strong leadership in managing stakeholder relationships.
• Demonstrated project engagement skills, including the preparation and presentation of regular reports and documentation, effective communication of project status and progress to stakeholders and IT teams, and alignment with business priorities.

Work location: Changi Business Park (One@ Changi City)

To apply, please visit www.gmprecruit.com and search for Job Reference: 24771

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

§ Planning, co-ordination and execution of LTA and SMRT projects

§ To attend all interface and co-ordination meetings with different stakeholders and contractors

§ Installation, monitoring, supervision, testing and troubleshooting of RTU at site

§ Preparation of project documents and drawings

Requirements:

§ Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

§ Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

· Quality Control is responsible for the activities at the plant by the inspection, sampling, and disposition of products used in the manufacturing processes throughout the organization.

· As a member of the Quality Control department, a Quality Control Analyst will be expected to successfully execute the responsibilities relating to the sampling, testing, and inspection of all product lots received by the quality control department. These activities include Chemical raw materials, component inspection, and final packaging.

Responsibilities include:

· Demonstrate proficiency in a task by completion of an On the Job Training.

· Maintain proficiency in training per curricula on all governing procedures.

· Perform all aspects of QC responsibilities as it pertains to release activities that will include but is not limited to: sampling, testing, and disposition of raw materials and final packaging/ component lots

· Support additional areas of QC including Rejected, Quality Hold, and Non-conforming materials.

· Perform all activities adhering to strict cGMP guidelines

· Maintain on-time completion of all training requirements

· Perform simple laboratory instrument up keep including the cleaning, calibration, and the preventative maintenance of the instrument as outlined within the departments governing procedures

· Participate in department initiatives to support the continuous improvement of the quality systems of the QC department

· Practice safe work habits and adhere to safety procedures and guidelines

Requirements:

• Min Degree in Science or equivalent with at least 2 years of relevant experience in the pharmaceutical / chemical industry.
• Experience in operating laboratory equipment such as HPLC, GC , KF Titrators.
• Working knowledge of cGMP and regulatory requirements related to Quality is an advantage
• 5 days office hours

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Thank You.

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

Responsibilities:

• Install, test, commission, and conduct preventive and corrective maintenance (PM & CM) on healthcare equipment/systems.

• Address and resolve recurring issues promptly to ensure consistent customer satisfaction.

• Plan and schedule PM or CM tasks efficiently.

• Provide post-sales support as needed.

• Coordinate with manufacturers, vendors, contractors, and clients for project management.

• Assist the project team in executing projects smoothly.

• Respond promptly to service calls.

• Collaborate with team members to gather feedback and identify prospects.

• Undertake any additional tasks as assigned.

Requirements:

• NITEC/Diploma in Electrical/Electronic/Biomedical Engineering or equivalent.

• Proficient in using software-assisted technical service diagnostic and testing equipment.

• Minimum of 2-3 years' relevant experience preferred; fresh graduates with a keen learning attitude are encouraged to apply.

• Strong interpersonal skills and customer service orientation.

• Good command of English and familiarity with Microsoft Office and IT tools.

• Self-motivated, diligent, and reliable.

• Possession of a valid driving license is advantageous.

• Able to work independently as well as part of a team.

• Fluent in both spoken and written English.

• Position: IT Field Service Engineer (Maintenance support/Servers/ Network/ Storage for-IBM/DELL)
• Location: Ubi Techpark
• Working hours: 5 days work week; Monday to Friday: 9am - 6pm
• Salary (commensurate with experience): Gross up to $5000 (Basic up to $4000 + OT) + AWS + Allowance for mobile phone; Education Subsidy if applicable + Group Medical Plan
• Duration: Permanent
• Industry: Information & Communications Technology (ICT)

Main Responsibilities:

• Provide post sales maintenance support on servers/storage (IBM/HP/DELL/SUN) and operating systems (Linux/Unix/Windows) at customer locations;
• Troubleshooting and replacement of hardware;
• Troubleshooting of operating system;
• Handling of hardware migration/implementation project;
• Perform preventive and proactive maintenance;
• Escalation and management of complex issues.

Requirements:

• Diploma holder or above in Computer Engineering/Science or related discipline;
• Possessed at least 3 years of experience in IT hardware maintenance service on server, network and storage preventive.
• Strong server and storage hardware configuration knowledge will be an advantage;
• Be a quick learner in acquiring new system skills and working with new technologies;
• Capable of using operating systems: Microsoft Windows, Unix, ESX, and Linux are preferable;
• Proficiency in solving computer hardware related issues for IBM, DELL, and HP;
• Able to provide nonoffice hours standby and support service

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies):

www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Permanent. 5 days. Alternate saturday 4 hr. Jurong

Our client

A very profitable decades old company specialised in machine automation, manufacturing equipment/manufacturing system design, calibration related products

Area of business: Global

Industry served: chemical, pharmaceutical, food

Abt the position:

Involved in full cycle mechanical design machine from conceptualization,designing, testing , commissioning.

Job scope:

1. Meet n discuss with client of the customized technical requirement.

2. To mechanical design n produce fabrication drawings for

(a) Material handling/ feeding / pick and place system, jigs and fixtures. (non static )

( b) Tanks and vessel design.(static)

(c )simple steel structure / process piping design

4. To perform equipment integration

5. To project manage

Requirement:

1. Diploma in Mechanical, Mechatronics Engineering or its equivalent.

2.Min 2 years experience in mechanical design manufacturing automated machine

Added advantage:

Mechanical design customized material handling equipment

whats on offer:

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

Work Location: Jurong

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Michelle Goh

EA License No : 22C1142

We regret that only shortlisted candidates will be notified.

Job Description

• Position: Mechanical Design Engineer (Marine & Offshore)
• Well Established Marine & Offshore MNC
• 5 Days Work Week
• Salary (commensurate with experience): Up to $6,000
• Working Location: Tuas
• Outpatient Medical Insurance Provided
• Duration: Permanent
• Industry: Marine & Offshore

Main Responsibilities:

• Assist Section Project Lead in day-to-day operations.
• Perform the assigned mechanical task under quality and schedule.
• Review and advise on the project’s design mode & standard.
• Familiar with Class regulation/rules, product, standard.
• Report the project daily discipline (Man-hour/Schedule etc.).
• Able to work with other team members for the overall progress of the project.
• Feedback for profession’s design mode & standard.
• Train & Guide other project mechanical engineer (AE or draft man) to work together.
• Study & solve the project issues under mechanical responsibility.
• Attending and reporting in project and section meeting.
• Complete the assigned task for different project drawings or documents.
• Prepare & Review HVAC calculation, specification and vendor's drawing.
• Prepare & Review HVAC 2D SLD/DLD design & submission.
• Prepare & Review HVAC 3D model and production & site related drawings/supports.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor.
• Responsible to Mechanical Project Section Lead / Mechanical Technical Lead.
• Project Handling- New building project, repair, upgrading, conversion project.

Requirements:

• Minimum Diploma in Mechanical Engineering or relevant discipline.
• At least 5 years of relevant work experience in Machinery or HVAC newbuilding design in the Marine & Offshore industry.
• Familiar with AutoCAD, MS Office & AVEVA software.
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.
• Able to perform mechanical design (2D & 3D) independently.
• Able to review equipment document.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257

• Well Established Company
• Basic $4000 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety
• Perform electrical and Instrumentation troubleshooting
• Able to work and trouble shoot with AC low voltage single phase and 3 phase systems
• Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain
• Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose
• Experience in 3 phase generator control interfacing to grid power
• Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva)
• Understand and develop electrical panel schematics if needed
• Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting
• Update and control of Electrical specification, procedure and drawings
• Material Management including consumables, parts and spare units
• Responding to breakdowns, diagnosing faults, record and report
• Review and approve of service, repair and overhaul equipment, record and report
• Managing routine 5S at the maintenance workshop, store and work area at site
• Communicate with clients, consultants, project personnel and relevant authorities
• Other ad-hoc duties as assigned

Requirements:

• Degree in Electrical Engineering or Instrumentation / Maintenance Engineering
• At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Position: Network & Security Engineer
• Well Established Singapore Based IT Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $8,000
• Working Location: East
• Duration: Permanent
• Industry: IT

Main Responsibilities:

• Project implementation, migration, and maintenance support across various products, including:

1. Wireless Networks, Switches, and Routers: Implementation of Cisco, HPE/Aruba, or Ruckus switches with multiple VLANs and routing; wireless implementations using Cisco, Aruba, or Ruckus.
2. Other Products: Bluecoat Proxy, RSA Server, MS Radius Server, Aruba ClearPass, Aruba AirWave, Nessus, SolarWinds, PRTG.
3. Firewalls: Cisco, Checkpoint, Watchguard, FortiGate, Palo Alto, and Juniper, including IPsec/site-to-site VPN, and UTM features such as antispam/antivirus, IPS/IDS, and content filtering.
4. Basic Windows Server implementation with AD, DHCP and DNS.
5. MS Azure network configuration.

• Provide 24x7 software maintenance support on a rotational standby basis.

Requirements:

• Possess a degree or diploma in Computer Science.
• Minimum 3 years of IT experience, preferably with project implementation and support exposure in systems integrator environment.
• Knowledge of VMWare, or HP/IBM Blade servers/SAN storage would be an added advantage.
• Candidates with less experience will be considered for a junior position.
• Salary will be commensurate with the candidate's experience.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257

• Well Established Company
• Basic $3000 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Gul Circle (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Responsible for outdoor and indoor repair work of all cleaning products
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Required to work within the Company workshop where there is no outdoor repair
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Position: Engineer (Radio-Frequency)
• Well Established Singapore Based Manufacturing MNC
• Working hours: Monday – Friday (8:30am – 6:00pm)
• Salary (commensurate with experience): Up to $6,800
• Working Location: Ang Mo Kio
• Outpatient Medical Insurance Provided
• Duration: Permanent
• Industry: Manufacturing

Main Responsibilities:

• Part of the VSAT product development team involved in designing LNA, Power Amplifier, Up/Down Converter operating up to Ka band frequencies.

Requirements:

• Minimum Degree in Electronics Communication Engineering.
• At least 3 years of experience in any RF system/sub-system design.
• Experience in RF circuit design like LNA, PA, Up/Down Converter, Synthesizer etc.
• Working knowledge of RF test and measurement equipment.
• Experience in using simulation software such as AWR, ADS, HFSS etc.
• Experience in VSAT system or subsystem design is an added advantage.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257

Job Description

• Position: Senior Mechanical Design Engineer (Marine & Offshore)
• Well Established Marine & Offshore MNC
• 5 Days Work Week
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Outpatient Medical Insurance Provided
• Duration: Permanent
• Industry: Marine & Offshore

Main Responsibilities:

• Perform and represent as a Lead Engineer for Engineering Mechanical for projects like major repair / upgrading / conversion projects or new build projects.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering & procurement schedule.
• Perform as a Mechanical Senior Engineer to generate and complete the assigned tasks for projects within the allocated timeline and high degree of accuracy.
• Prepare & review equipment technical specification / drawings to ensure completeness & correctness with company requirements.
• Prepare & review equipment parameter & mandatory calculation.
• Prepare & review piping schematics (P&ID).
• Prepare & review machinery & HVAC layout, equipment installation & alignment.
• Prepare & review mechanical design and construction standard.
• Review 2D & 3D for piping detail and production design.
• Prepare & review testing protocol & operation manual.
• Guiding & checking mechanical engineer activities.
• Perform as a responsible mechanical team member to provide technical support for site mechanical issue and handle multiple mechanical tasks as assigned.
• Handle & complete multi-tasks for multi-projects as needed.
• Visit & provide the on-site / travelling supports as needed.
• Contribute extra & compromise rest for urgency assignment as needed.

Requirements:

• Minimum Degree in Mechanical Engineering or relevant discipline.
• At least 5 years of relevant experience in machinery, piping & new-building engineering design in the marine & offshore industry.
• Familiar with Auto-CAD / Microsoft Office / AVEVA
• Familiar with Rules and Regulations from Classification Society and Authorities.
• Familiar with theory and calculation of marine / offshore mechanical & piping design.
• Good communication and analysis skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257

Job Description

• Position: QC Engineer
• Well Established Singapore Based Electronics Manufacturing MNC
• Working hours: Monday – Friday (8:30am – 6:00pm)
• Salary (commensurate with experience): Up to $4,500
• Working Location: Ang Mo Kio
• Outpatient Medical Insurance Provided
• Duration: Permanent
• Industry: Electronics Manufacturing

Main Responsibilities:

• Working with Process Engineer & Engineering team on QC requirement.
• Documenting inspection criteria and quality plan.
• Work with QA, Process and Product team on corrective action with quality issue.
• Work with Process team on in-process audit and FQC audit.
• Control of Supplier Quality Assurance (SQA).
• Quality control of in-coming, in-process and out-going products.

Requirements:

• Minimum Diploma in Manufacturing / Quality Engineering.
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment.
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement.
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts.
• Able to converse with in Mandarin fluently as it is required to liaise with China suppliers.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257

Job Description

• Position: Electronics Engineer
• Well Established Singapore Based Electronics Manufacturing MNC
• Working hours: Monday – Friday (8:30am – 6:00pm)
• Salary (commensurate with experience): Up to $4,500
• Working Location: Ang Mo Kio
• Outpatient Medical Insurance Provided
• Duration: Permanent
• Industry: Electronics Manufacturing

Main Responsibilities:

• Technical transfer product / project in assembly and testing, and from customers.
• Provide technical support in manufacturing and testing in product build.
• Provide technical support to QC in RMA issue.
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit.

Requirements:

• Minimum Diploma in Electronics Engineering.
• At least 2 years of relevant work experience in the Electronics Manufacturing industry.
• Technical competent to handle product / project manufacturing, transfers and troubleshooting.
• Experience in product / project, PCBA manufacturing and testing.
• Able to liaise with customers on technical matters.
• Experience in manufacturing environment with ISO13485 & FDA.
• Good communication and problem-solving skills.
• Medical product experience and Quality Management System exposure is an added advantage.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257

Responsible for tooling drawings, specification filing and maintenance. Manage projects, ensure all tooling are executed smoothly and efficiently against an agreed plan. Perform evaluation and development activities to provide solutions for technical problems to sustain and improved production yield, quality, process cycle-time and cost reduction.

Requirements:

· Degree / Diploma in Engineering or its equivalent with minimum 3 years' experience in plastic injection molding environment.

- 5 days work week

- Working hours - 8.15am to 5.30pm

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Position : Technical Support Engineer (Mechanical /Experience in Rotary machinery/Turbines/Pumps hands)
• Location : Henderson Road
• Working hours : 5 days a week - Monday to Friday from 9am to 6pm
• Salary (commensurate with experience) : Basic up to $5200 + AWS + Performance Bonus
• Duration : Permanent
• Industry : Business and management consultancy services

Main Responsibilities:

• Be the primary technical contact for customers
• Assist customers in the repair and maintenance activities, but also with providing spare parts and associate services identify and translate customers’ requests; handle technical incidents and establish reports (troubleshooting, expertise, gathering useful information for analysis
• Guarantee, when necessary, the proper processing of offers: spare parts, onsite interventions and repairs.
• Coordinate onsite interventions actions and ensure an ongoing communication to the customer.
• Provide technical assistance to the Repairs Department and Field Service Technicians + Business Centers;
• Occasionally promote to customers technical training sessions and sales of spare parts and repairs;
• Initiate, together with the appropriate stakeholders, the implementation of corrective actions that arose from customer complaints/claims.
• Be the technical interface within departments, such as Engineering, Purchasing, Sales, Production, Global Service and customers
• Identify potential sales opportunities and forward the information to the sales teams.
• Recommend spare parts needed for regular maintenance/during troubleshooting
• Acts as last form of technical checks to make sure the spares quoted is according to customer’s requirement curb warranty costs.
• Manage Workshop activities including all repairs, safety issues related to company's products
• Guarantee, when necessary, the proper processing of offers: onsite interventions and repairs.
• Inventory control of all spare parts including good inwards and maintain inventory cost at acceptable level and sufficient stock to support customer’s needs

Requirements:

• Have 3 to 5 years of experience in Mechanical Engineering. Marine engineering with mechanical knowledge will also be considered.
• Must have experience on rotary machinery such turbines and pumps hands
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only.

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Well Established Company
• Basic $3500 - $4000 + $1020 Transport Allowance + Incentive + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.15am to 5.30pm

Job Responsibilities:

• To market a full range of Professional & Industrial Cleaning equipment, and accessories & tools, to corporate customers, with an emphasis in oil and gas sectors
• Serve existing assigned accounts and prospect potential new customers
• Learn & familiarise our products well, understand users’ needs, and so be able to offer solutions and assistance to meet their requirements
• Perform hands-on product demonstrations, as well as occasionally conduct presentations to mid-size audiences including management levels
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Polytechnic Diploma or equivalent with 2 years of relevant experience
• Possess Class 3 driving license and own vehicle

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Main Duty:

• Planning and completing monthly sales goals and objectives
• Capable of introducing products and services with thorough knowledge
• Communicate with affiliates to increase sales and offer technical support as needed.
• To choose the best airside equipment possible in order to reduce costs and increase the likelihood that the project tender will be successful;
• Respond promptly to customers regarding changes in project tender requirements;
• To process purchase orders, sales orders, etc. into the Oracle system;
• To accurately enter orders to factories;
• To ensure that delivery schedules meet customer requirements in order to be in line with sales forecasts

For interested applicants, kindly send your resume in Word/PDF format

Kindly include the following in your resume.

• Current Salary
• Expected Salary
• Availability
• Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (23S1595/R23116355)

SCOPE OF THE ROLE

You will be responsible for the end-to-end software development and support for all work related to projects, quarterly change requests, L3 production fixes. This includes software product implementation and administration, application design, development, implementation, testing and support. You will be expected to work on Kubernetes based platforms.

You will also be responsible for quality assurance of the team’s delivery in conformance with the Bank-defined software delivery methodology and tools. You will partner with other technology functions to help deliver required technology solutions.

Other responsibilities include:

- Create frameworks, technical features which helps in faster implementation of OpenShift Kubernetes based applications

- Carry out POCs involving new data technologies, new container platforms, sidecars, daemonsets

- Design and develop application frameworks for container integration

- Create technical documents such as solution design, program specifications for target solutions

- Perform design and development of applications which may not be limited to: Software Applications, Data Integration, User Interfaces, Automation

- Maintain and recommend software improvements to ensure a platform centric management of software applications

- Performance tuning

- Work with production support team members to conduct root cause analysis of issues, review new and existing code and/or perform unit testing

- Perform tasks as part of a cross functional development team using agile or other methodologies and utilising project management software

- Independently install, customise and integrate software packages, programs, product releases

Functional skillsets

Hands-on experience in implementing large scale data warehouse & analytics platforms in financial services industry with good functional knowledge of products & services offered in Retail bank / Wholesale / Global Markets covering some of the following analytics domains:

- Experience in deploying stateless, stateful workloads on OpenShift Kubernetes based platform

- Experience in developing microservices applications using node js, React, Java, RabbitMQ, Akka framework, Apache Consul, Apache Geode, Redis

- Experience in developing frameworks using Spark, Scala, Java, Python

- Experience in working with in-memory applications

- Strong knowledge of Operating Systems

- Experience in container deployment management using either Helm Package manager or Kustomize

- Experience in integrating container applications with an external security vault such as CyberArk Conjur, AAM

- Experience in deployment automation of container applications using Jenkins, Jfrog, Gradle, Bitbucket, Groovy

- Expertise in implementing appropriate security of data (SSL, Encryption)

- Expertise in Load balancing and replication, scheduling

- Good knowledge of Custom Resources, Docker, Taints & tolerances, Node affinity, ConfigMaps

- Experience in Shell scripting, Control-M

- Expertise in design of role based fine grained access control

- Supporting application failures, planning for resiliency, Back-up Recovery

Technical skillsets

Cloud Engineer

- Platforms provided by IBM Cloud Pak for Data (CP4D)

- Kubernetes based platforms such as OpenShift, AWS, Azure, GCP

- Software defined storage (ODF)

- IBM Storage Fusion

- S3 compatible storage options (Dell ECS, HCP)

- Node js, React, Java, RabbitMQ, Akka framework, Apache Consul, Apache Geode, Redis

- Scala, Java, Python

- Helm Package manager, Kustomize

- Jenkins, Jfrog, Gradle, Bitbucket, Groovy

- Shell scripting, Docker

- Splunk, Prometheus, Geneous

At least, 2 to 3 technical certifications in any of the below technologies:

1. OpenShift

2. Kubernetes, Docker

3. Language – SQL, Java, Python, Scala

Automation / scripting – CtrlM, Shell Scripting, Groovy

1. CI/CD software, Testing Tools - Jenkins, SonarQube

2. Version Control Tool - Aldon+LMe, CA Endeavor

3. Deployment Tool kit -Jenkins

4. Service or Incident Management (IcM) Tools - Remedy

5. Source Code Repository Tool - Bitbucket

6. Scheduling Tool - Control-M

7. Defect Management Tool - JIRA

8. Application Testing tool – QuerySurge

9. Cloud certification

- Bachelor’s degree/University degree in Computer Science, Engineering, or equivalent experience

ByteDance will be prioritizing applicants who have a current right to work in Singapore, and do not require ByteDance's sponsorship of a visa.

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok and Helo as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible.

Together, we inspire creativity and enrich life - a mission we aim towards achieving every day.

To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At ByteDance, we create together and grow together. That's how we drive impact - for ourselves, our company, and the users we serve.

Join us.

About The Team

The Applied Machine Learning (AML) team combines system engineering and the art of machine learning to develop and run massively distributed recommendation system around the world.

On the team, you'll have the opportunity to sharpen your expertise in coding, performance analysis and large system operation, and get heavily involved in the process of hardware/capacity decision-making.

DevOps ensures that the very centric machine learning services at TikTok have the highest level of availability, as well as creating highly automated systems and pipelines.

Responsibilities

- Research, design, and develop computer and network software or specialised utility programs.

- Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.

- Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.

- Work with computer hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.

- Research, design, and develop computer and network software or specialised utility programs.

- Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.

- Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.

- Work with computer hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.

Qualifications

Minimum Qualifications

- Bachelor’s degree in Computer Science or equivalent

- Proven experience in analyzing and troubleshooting distributed systems.

- Prior experience designing and maintaining large-scale systems.

- Experience programming in at least one of the following languages: Python or C/C++

- Expertise in DevOps technologies like Ansible, Terraform, Salt, Bash Scripting, etc.

- Experience in building solutions with AWS, Google, Azures, AliCloud or other cloud services.

- Familiar with Unix/Linux operating systems.

Preferred Qualifications

- Ability to thrive in a fast-paced environment.

- Strong understanding of code optimizing and routine tasks automation.

- Proficiency in at least one machine learning framework: TensorFlow, PyTorch, MXNet or PaddlePaddle.

- Solid background of algorithms and data structures.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

• Well established Company
• Basic $3500 - $ 5000 + AWS + Variable Bonus
• Working location: Northeast
• Working hours: 8:30am – 5:30pm (Mon to Fri)
• Electrical & Electronics (E&E) |CCTV | ELV
• Training Provided

Job Responsibilities:

• Lead and manage facilities, security projects and maintenance from concept till complete
• Collaborate with cross-functional teams to gather requirements and design custom solutions
• Implement and optimize surveillance techniques
• Implement maintenance regime on facilities ensuring low downtime
• Ensure projects are completed on time, within budget and meet the highest quality standards

Requirements:

• Diploma and/or Degree in Electrical and Electronics Engineering or Instrumentation Control or equivalent
• Experience in CCTV / Project Execution
• Training Provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492