• Preparation of Inspection and Test Plan, Checklist, Procedures and review of construction drawings.
• Material receiving inspection of pipes, fittings, gaskets, valves, flanges, Steel Structure, bolts & nuts in compliance to material list, mill certificates, test reports and correct ,material specification.
• Control of quality for piping and steel stucture fabrication such as fit-up, welding, visual and dimensional inspection conforming to approved for construction drawings.
• Responsible for issuance of Non-Conformance Reports if any violation and out of standard for piping works.
• Conducts quality coordination meeting and initiate corrective and preventive action.
• Inspection of piping spools, steel structure fabrication, installation and testing.
• Preparation of all inspection reports and clearance of dossier at close up.

Requirements

Must possess bachelor degree

Must possess CSWIP 3.1/AWS

Must have Marine shipyard experience

• Ensure all quality control documentation is compiled and completed for as-built handover through the QC turnover engineer
• Review and prepare reports on Authority inspections (RI inspection, BCA TOP inspection, etc)
• Establish Project Quality System, implement and maintain in accordance with Singapore standards application to BCA for CONQUAS Assessment and provide a framework to achieve the score
• Assess the implementation of the Quality Plan and Quality Control Plans on site
• Ensure the project QA/QC plan follows specifications and contract requirements
• Compete for site quality control instructions and action remedial responses
• Coordinate quality inspections with all the site subcontractors and vendors and coordinate all non-destructive testing on site
• Distribute relevant QA/QC documentation to site subcontractors
• Verify the quality-related site activities are in accordance with the applicable codes and standards
• Participate in the site's internal and external site audits
• Coordinate all the quality site inspections through the site QC inspectors
• Control all nonconformance reports and undertake remedial action
• Must have fluent English communication skills to liaise with the Client’s staff
• Have Main Contractor Experience

Job Description:

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements:

• Minimum Diploma or Degree in Chemistry, Food Science and Technology, Analytical Chemistry or equivalent in years of similar experience.

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

What This Job Offers:

• Basic Salary: Up to $3,000 + Fixed Allowances: $950
• Additional Benefits: Permanent role with AWS, Variable Bonus, and Flexi Benefits
• Location: Jurong Island
• Work Schedule: 12-hour rotational shifts

Requirements:

• Degree holders in Chemistry (Fresh grads are welcome!).
• Internship or hands-on experience in chemical lab testing is a bonus.
• Willing to work 12-hour shifts and thrive in a dynamic lab environment.

Key Responsibilities:

• Conduct quality control (QC) analysis on raw materials, in-process, and finished products.
• Coordinate QC activities to support other departments and business needs.
• Troubleshoot and make critical decisions to ensure accurate QC results.
• Proactively improve QC systems and processes.
• Lead short-term projects and investigations for customer complaints.
• Calibrate lab equipment and maintain records.
• Supervise plant operators and train new QC team members.
• Take full ownership of the QC lab during shifts.

Why Join Us?

• Be part of a critical team ensuring product excellence for a global organization.
• Gain hands-on experience in a fast-paced chemical manufacturing environment.
• Take charge of projects and develop valuable leadership skills.

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

Job Scope:

• Develop and implement quality control procedures and policies
• Conduct inspections and audits to ensure compliance with quality standards
• Monitor and test materials, products, and processes to verify quality
• Identify and resolve quality issues and non-conformance
• Review project specifications, drawings, and standards for quality requirements
• Prepare quality reports and document test results and inspections
• Coordinate with suppliers and subcontractors to ensure quality requirements are met
• Perform root cause analysis for quality failures and implement corrective actions
• Ensure that safety and environmental standards are followed during inspections
• Train and mentor staff on quality control processes and best practices
• Maintain records of quality inspections, certifications, and test results
• Support project managers in quality planning and control
• Ensure continuous improvement in quality processes and systems

Requirements:

• Engineering degree
• 5+ years of QA/QC experience in construction
• Experience in structural steel or precast RC works
• Strong interpersonal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Summary

We are seeking a highly motivated and experienced Quality Manager to lead our quality assurance efforts for the production of state-of-the-art nanoparticle synthesis equipment and systems. The ideal candidate will have a strong technical background in engineering or a related field, coupled with a deep understanding of quality management principles and practices. This role requires a hands-on approach, involving direct participation in assembly, calibration, and quality assurance processes.

Responsibilities

Quality Management System:

• Develop, implement, and maintain a robust quality management system (QMS) aligned with industry standards (e.g., ISO 9001).
• Oversee the documentation and control of quality records, procedures, and work2020 instructions.
• Conduct regular internal audits to ensure compliance with QMS requirements and identify areas for improvement.

Quality Assurance

• Lead inspections, tests, and verifications of products and processes.
• Collaborate to ensure product designs and manufacturing processes meet quality standards.
• Analyze quality data to identify trends, root causes of defects, and opportunities for process improvement.
• Implement corrective and preventive actions to address quality issues and prevent recurrence.

Hands-on Involvement:

• Actively participate in the assembly, calibration, and testing of nanoparticle synthesis equipment and systems.
• Conduct detailed inspections and functional tests to ensure product quality and performance.
• Troubleshoot and resolve technical issues that may arise during production or testing.
• Implement 5S for continuous improvement of work quality across production and quality management

Supplier Quality:

• Evaluate and qualify suppliers based on quality performance and delivery capabilities.
• Monitor supplier performance and take corrective actions as needed to ensure consistent quality.

Regulatory Compliance:

• Stay informed of relevant industry regulations, standards, and certifications (e.g., ISO, CE marking, FDA).
• Ensure compliance with regulatory requirements and maintain necessary documentation.

Continuous Improvement:

• Promote a culture of continuous improvement and innovation within the organization.
• Identify and implement process improvements to enhance efficiency, reduce costs, and improve product quality.
• Lead or participate in lean manufacturing or Six Sigma initiatives.

Qualifications and Skills:

• Bachelor's degree in Engineering, Physics, Chemistry, or a related field.
• Advanced degree (Master's or PhD) preferred.
• 2+ years of experience in quality management, preferably in equipment for nanomaterial synthesis
• Strong understanding of quality management principles, tools, and techniques.
• Experience with ISO 9001 and other relevant quality standards.
• Excellent problem-solving and analytical skills.
• Strong attention to detail and a commitment to quality.
• Excellent communication and interpersonal skills.
• Proficiency in using quality management software and tools.
• Hands-on experience with assembly, calibration, and testing procedures for nanoparticle synthesis equipment.
• Ability to work in a highly agile start-up environment

Benefits

The recruited researcher will have the opportunity to work as part of an international, interdisciplinary team, across Singapore and the United Kingdom. Accelerated Materials works to provide an inclusive environment to maximize employee wellness, with initiatives such as remote work programs and flexible hours. We also provide expert mentorship in entrepreneurship for candidates interested in commercialization of their inventions.

If you are a highly motivated and results-oriented individual with a passion for quality, we encourage you to apply.

About Accelerated Materials

Accelerated Materials’ vision is to bring sustainable, next generation nanomaterials to reality. As a spinout from the University of Cambridge and the Cambridge Centre for Advanced Research and Education in Singapore (CARES), AM is commercializing a unique platform for nanomaterial synthesis, and is now pushing forward their first laboratory scale synthesis equipment and software products.

• Well Established Medical Devices Manufacturing Company
• Basic $2300 - $3000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working hours: 12 Hours Shift

Job Responsibilities:

• Carry out inspection of incoming materials and finished products according to operational instructions to ensure that materials or products meet the requirements
• Ensure product identification is correct and stored in the correct location, maintenance of inspection equipment and daily monitoring of production environment
• Statistics on the quality status of incoming materials and processes and the quality of shipped products
• Report abnormalities to superior in timely manner and inform relevant departments and track the improvement status of non-conformities
• Assist in customer complaint analysis and take corresponding improvement measures
• Ensure records comply with good writing practice GDP requirements
• Assist the superior to complete other tasks

Job Requirements:

• At least 1 year of quality management experience and basic computer software
• Blueprint reading capabilities, and ability to use measuring devices like gauges, meters, calipers
• Documentation and reporting skills

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Key Responsibilities:

· Implement methods to inspect, test and evaluate products and production equipment.

· Inspect Incoming raw materials’ quality (IQC).

· Ensure that products adhere to quality standards.

· Prepare reports by collecting, analyzing and summarizing data.

· Train and manage production line staff in production practices and quality assessment of goods.

· Track products in WIP (Work in Process) to guarantee that each part of the process is correct.

· Improve Production Yield by ensuring good QA practices and implementing corrective actions.

Qualifications:

· Diploma or higher in Quality Management, Engineering, or a related field.

· Minimum of 5–8 years of experience in quality assurance/control within a Manufacturing, Aerospace, or related industry.

· In-depth understanding of AS9100 or ISO9001, and regulatory compliance frameworks specific to Aviation.

· Experience in Calibration procedures and maintaining Inspection Tools and Systems.

· Excellent problem-solving skills with a keen attention to details.

· Ability to work independently as well as collaboratively within a team.

· Good team player, good attitude, honest, discipline, positive thinking, resourceful, and a good problem solver.

· Excellent communication skills to foster effective teamwork and communication within the operations team and the customers.

How to Apply:

If you are passionate with the Aerospace industry and want to be part of a forward-thinking company at the forefront of the Aviation Industry, dedicated to exceeding customer expectations, and navigating the dynamic Aviation landscape, and where your expertise in Quality Assurance will help shape innovative and reliable Aviation Solutions, we invite you to join REETZ and work with us to take the Company to a new height. Please submit your application to the email address: [email protected]

Note: This role requires frequent travel and will be based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Key Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to address and resolve abnormal quality issues within the manufacturing process.
• Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Drive efforts to improve internal quality control procedures and enhance process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead initiatives to resolve customer-reported quality issues, ensuring timely and effective resolutions.
• Prepare detailed reports for stakeholders outlining corrective actions and preventive measures.
• Develop and implement strategies to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to enhance inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a unified approach toward achieving quality objectives.
• Manage personnel-related tasks, including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Oversee the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor’s degree in a relevant field; advanced degree preferred.
• A minimum of 6-8 years of proven experience in quality management, particularly within manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience collaborating with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.
• Willingness to travel frequently and be based in China and Vietnam for at least 10 months per year (separate living accommodations provided). The role includes annual 4 round-trip tickets back to Singapore.

• Well Established Medical Devices Manufacturing Company
• Basic $2200 - $3000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working hours: 12 Hours Shift

Job Responsibilities:

• Carry out inspection of incoming materials and finished products according to operational instructions to ensure that materials or products meet the requirements
• Ensure product identification is correct and stored in the correct location, maintenance of inspection equipment and daily monitoring of production environment
• Statistics on the quality status of incoming materials and processes and the quality of shipped products
• Report abnormalities to superior in timely manner and inform relevant departments and track the improvement status of non-conformities
• Assist in customer complaint analysis and take corresponding improvement measures
• Ensure records comply with good writing practice GDP requirements
• Assist the superior to complete other tasks

Job Requirements:

• At least 1 year of quality management experience and basic computer software
• Blueprint reading capabilities, and ability to use measuring devices like gauges, meters, calipers
• Documentation and reporting skills

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Quality Assurance / Quality Specialist / Quality Engineer

Company Overview

Location: Kranji (near MRT with a 5-minute shuttle bus)

Number of Openings: 9
Duration: 6-month
Salary: up to 8K

Job Responsibilities:

1. Documentation and Quality Oversight:Revise, review, and approve SOPs, MBR/EBR, and QO documents.
   Provide quality guidance and support to the manufacturing team, addressing quality queries and issues.
   
2. GMP and Compliance:Conduct quality oversight activities, including GEMBA and GMP walks.
   Adhere to and enforce cGMP and regulatory requirements, especially for FDA and EU compliance.
   
3. Qualification/Validation Support:Perform IQ/OQ tasks and assist in validation activities including Data Integrity, Analytical Instrument Qualification, Analytical and Microbiology Method Validation, and Critical Reagent Qualification.
   Review and approve related protocols, reports, and ensure alignment with regulatory requirements.
   
4. Project Involvement and Collaboration:Act as the Quality Representative in cross-functional projects.
   Provide validation expertise and maintain Master Validation Plans.
   Collaborate on multi-site initiatives to harmonize Quality Systems across plants.
   
5. Documentation Integrity and Inspection Readiness:Ensure documents are clear, compliant, and defendable during audits.
   Support multisite initiatives to align validation activities across locations.
   
6. Other Responsibilities:Build and maintain partnerships with internal departments.
   Adhere to EHS requirements and Shire’s Code of Conduct.
   

How to Apply: Send your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan.

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence Number: 99C4599 Personnel EA License: R1331820

• Collaborate and communicate effectively with internal teams, including OPS packers, admin/logistics coordinators, and the QC team.
• Perform daily quality checks on inspection reports from Kizeo to ensure they meet documentation standards.
• Manage the distribution and revision of all company quality documentation, updating work instructions when necessary.
• Review and verify the accuracy of reports submitted by the QC team daily.
• Track and update the qualifications and training requirements for quality inspection personnel as directed by the executive and manager.
• Update the department's work instructions to reflect changes in job flow or customer requirements.
• Step in as a QC inspector to carry out routine inspections when needed.
• Perform Y7 tasks in SAP for NC crates.
• Handle any other ad-hoc tasks assigned by the executive or manager.

Requirements:

• Proficient in MS Office (Word, Excel, Outlook).
• At least 1 year of experience in a warehousing environment.
• Able to adapt to a fast-paced, detail-oriented role.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC
• Industry Leader
• Permanent Position
• Knowledge in ISO 22000 / FSSC22000, or any other GFSI recognized certification
• Knowledge in ready-to-eat, cooked chilled / freeze production food safety requirements

Our client, a leading quality food provider and wholesaler, is looking for suitable talents to join their growing business as QA Manager.

RESPONSIBILITIES:

• Be the main person in charge in maintaining the Management System (FSMS and HSE).
• Manage and report actions for products under quality on-hold or other issues to the Management including major issues which could affect business performance.
• Lead and ensure the QA team perform their roles and responsibilities as defined in their job description.
• Ensure all products received, stored, process, packed and distributed in compliance with SOPs
• Key contact person for operational staff, customers and suppliers on Quality matters.
• Overseeing and Handling of customer complaints/feedback and Goods Return.
• Ensure process monitoring - GWP/Pest Control/Hygiene/Safety in the company compound.
• Ensure compliance of CCP / OPRP and food safety requirements of manufacturing kitchens.
• Involving in regulatory, statutory and customer’s audits and assist in follow-up corrective/preventive actions.
• Manage Document Control.
• Relationship management on QA or compliance matters, supporting our Sales, Operation & Logistic team.
• Handle licensing and certification application and renewal with authorities and certification bodies.
• Any other ad hoc duty as assigned by the Management.

REQUIREMENTS:

• Diploma or Bachelor Degree in Food Science or relevant disciplines
• Minimum 5 years of relevant working experience, with supervisory/people management experience
• Knowledge in ISO 22000 / FSSC22000, or any other GFSI recognized certification
• Knowledge in Halal, ASC & MSC, ISO45001 and BizSafe certification
• Comfortable with communicating with internal stakeholders and external parties (Eg, SFA officer, auditors, customers, vendors, etc).
• Technically oriented and able to deal with meat product
• Knowledge in ready-to-eat, cooked chilled / freeze production food safety requirements
• Knowledge in product labelling requirements
• Proficient in MS Office applications

OTHER INFORMATION:

• Location: West
• Working hours: Monday to Friday, Office Hours
• Salary: Salary will commensurate according to experience & qualifications.
• The Company strives to achieve employee satisfaction and provides a conducive working environment, attractive incentives, and remuneration to all staff.

HOW TO APPLY:

Interested candidate, please submit your updated resume in MS WORD Format to Florence Pang Rou Jing (R23118044) :

Email – [email protected]

or reach out to your Friendly Consultant, Florence at WhatsApp 8655 6810 (text message only) for a confidential discussion.

Please click “Apply Now” button to submit.

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence. By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Purpose: To lead in overall Supplier Quality Management including qualifying of potential suppliers, enhance supplier's quality, logistics, technology, cost and service (QLTCS) performance. Strategic development of existing and new suppliers to meet customers’ and company’s needs. The plan shall include semiconductor and analytical industry requirements as part of overall supplier development program.

Key Area of Responsibilities:

• Lead a team of Supplier Quality Manager/Engineer, Supplier Quality Engineers to manage suppliers and support the internal team as well as customers. Including deployment of customer-specific technical requirements, mTPD process management, Technical Qualifications, FAIR, 8D, CAPA, Process validation audits
• To develop low-cost suppliers to meet customers’ and company’s needs
• To develop alternative suppliers in the Mix Low Volume market to support localization and continuous cost reduction needs program
• Develop suppliers' technical capabilities, PQP & build-in quality process
• Supply chain ramp, capacity, and resource plan
• Work with strategic and preferred suppliers through regular scorecard sessions to improve QLTCS.
• Drive continuous improvement programs
• Manage Sustainability Requirements in the supply base
• · Continuous automation and improvement of supplier interface for better efficiency, communication, and control (Supplier Satisfaction)
• Supplier Training portal where customer-specific requirements can be deployed. Quality Tools can be communicated – 8D/CAPA, FAIR, PQP (CTQ, Process Flow, PFMEA, Control Plan, MSA, SPC)

Qualification & Experiences:

• Degree in Mechanical, Mechatronics or Engineering and other relevant discipline
• At least 5 year of experience as Supplier Quality & Development Manager in metal fabrication, (related to metal works including assembly, sub-assembly, structural, jigs & fixtures) or precision machining industry
• QMS Lead Auditor / Auditor trained and certified
• Experience in procurement and supplier development activities
• Knowledge of ISO 9001 /14000 requirements, application of various QC, analytical, and troubleshooting tools, and application of various measuring, and inspection equipment
• Ability to communicate with all levels and maintain relations with internal stakeholders, suppliers, customers and management.
• Ability to work in a dynamic environment and quickly adapt to changes
• Independent, strong sense of responsibility and a team player

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Responsibilities

• Establish, maintain, and continuously improve the Quality Management System (QMS), approvals, and regulatory compliance requirements.
• Plan, organize, and lead quality initiatives to promote a culture of quality within the organization.
• Maintain and enhance quality performance across all divisions.
• Conduct essential audits and inspections internally or via third parties or clients as required.
• Establish, implement, and coordinate the audit and approval program, report audit outcomes, and ensure corrective actions are followed up.
• Support teams in root cause analysis, develop action plans to prevent issue recurrence, and provide training and guidance as needed.
• Investigate incidents and prepare detailed reports in line with regulatory requirements.
• Train and develop employees on QMS processes, quality principles, tools, and techniques.
• Manage licensing applications and renewals for sites, products, and services.
• Allocate budgets and control costs for QMS projects, resource management, training, audits, certifications, and professional subscriptions.
• Implement quality procedures aligned with regulations and maintain documentation of approvals, procedures, and accreditations for assigned locations.
• Communicate quality procedures to ensure all regional team members understand their responsibilities in supporting quality assurance.
• Manage operational, technical, health, safety, and environmental audits per the audit schedule.
• Participate in investigations of quality issues, non-conformances, and complaints, ensuring documentation, reporting, and appropriate escalation.
• Monitor and follow up on supplier corrective and preventive actions (CAPA) and improvement initiatives.
• Contribute to statistical analyses to recommend improvements.
• Advise leaders and senior managers on compliance issues or supplier quality improvement needs.
• Perform any additional duties or projects as assigned.

Requirements

• Candidate must have minimum of 5 years working in aerospace MRO or aviation workshop
• Minimum Diploma in Engineering or Quality Assurance or related field.
• Candidate must be certified ISO Lead and Internal Auditor
• Passed the CAAS L11/M10 / L12 exam
• Experience in Part 145 approvals and activities.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Requirements:

• Degree in Information Technology or equivalent.
• Must have minimum 4-6 years of experience in Software Quality Testing with hands-on experience in Automation Testing.
• Experience with open-source automated testing frameworks such as Cucumber, TestNg and Playwright.
• Experience with open-source performance testing tools such as JMeter, Gatling, Locust or enterprise level tools such as HP LoadRunner
• Experience with open-source penetration testing tools such as ZAP, Burp Suite, SQL Map or enterprise level tools such as HP WebInspect, Nessus, CheckMarx.
• Must have strong understanding of testing techniques, risk analysis, test-driven development, continuous integration and continuous delivery.
• Must have proficiency in programming languages such as Java or Kotlin with good to have knowledge in Springboot.
• Experience working in SCRUM teams.
• Excellent written and verbal communications skills

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

Note: This role requires frequent travel and will be based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Key Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to address and resolve abnormal quality issues within the manufacturing process.
• Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Drive efforts to improve internal quality control procedures and enhance process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead initiatives to resolve customer-reported quality issues, ensuring timely and effective resolutions.
• Prepare detailed reports for stakeholders outlining corrective actions and preventive measures.
• Develop and implement strategies to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to enhance inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a unified approach toward achieving quality objectives.
• Manage personnel-related tasks, including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Oversee the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor’s degree in a relevant field; advanced degree preferred.
• A minimum of 6-8 years of proven experience in quality management, particularly within manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience collaborating with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.
• Willingness to travel frequently and be based in China and Vietnam for at least 10 months per year (separate living accommodations provided). The role includes annual 4 round-trip tickets back to Singapore.

Roles & Responsibilities

a) Perform environmental control/enforcement support to the team.

b) Identify any foreseeable risk of pollution arising from the workplace or work processes.

c) Propose practical action to eliminate any foreseeable ill-health, prevention of pollution at workplace.

d) Any other ad hoc duties required or assigned by Management that are relevant to the project.

Requirements

• Registered ECO (NEA)
• At least 2 years of relevant working experience
• knowledge of all relevant environmental policies, legislations, and guidelines, independent, with strong discipline and accountability.

1. Responsible for I&C engineering related matters.
2. Communicate and coordinate with team and all related stakeholders for planning and scheduling to facilitate smooth commissioning at site.
3. Ensure instrument and control elements installation and wire termination are done correctly and within acceptable standard of workmanship.
4. Enforce PSE and MEP to rectify any substandard works to ensure good quality of works for reliable operation.
5. Lead on-site testing and commissioning of chilled water control system, conduct thorough testing, and validation of control system to ensure proper functionality.
6. Documentation and records of T&C.
7. Handover control system to operation team in timely manner.
8. Respond to operational needs, ensure reliable control and monitoring of control system.
9. Configuration and zeroing of instrument, ensure accurate reading received at control system.

• Well Established Company
• Basic $6000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492