Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites
• Updates on codes of practice & environmental literature and circulates information to each level of employees

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
  Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Roles & Responsibilities:

• To look after worksite environmental, health & safety, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards.
• Advise & train workers, staff and site personnel on EHS.
• Responsible for monitoring all activities on site and ensure that all contractors comply with the requirements of environmental compliance.
• Record, compile and prepare HSE reports and submit site environmental control report periodically.

Requirements:

• Registered ECO with NEA.
• WSQ Certificate in Workplace Safety and Health.
• At least 5 years of experience in the building & construction industry as a Registered ECO.

The Opportunity

Esco Lifesciences Group is Singapore’s most globalized life sciences company, with annual revenues close to SGD 200M and global operations in over 42 locations and 26 direct countries across North America, Europe, Asia, Oceania.

Esco Aster Pte Ltd is an affiliate of Esco Lifesciences Group and was first incorporated in 2017.

Esco Aster is a contract research development and manufacturing organization founded and deeply rooted by scientists enabling fellow scientists to translate their bench work into commercially available products at affordable prices.

Our scientific work is in emerging and frontier biology utilizing cells as a final product or deriving products from cells which often we use cells as the factory to derive our target product.

Our first commercial breakthrough success is Esco Aster is commercially first in class being first in the world to be certified for cultivated/cell-based meat to FSSC 22000 and by a competent food regulatory body.

We are first in the region to operate an end-to-end integrated full cell line creation/immortalization or engineered cell line, cell culture process development, analytical development for stem cells and exosomes with full cGMP Capabilities from Drug Substance and small-scale fill & finish for final Cell Therapy Product.

The work we do creates a remarkable and lasting impact on our world. We offer you an opportunity to be part of this exciting journey to own your career and firsthand exposure to new emerging modalities supporting translational sciences.

Join us as we redefine BioSolutions for One World and One Health for the current and future generations to come.

Esco Aster.

One World Biosolutions for One Health.

Who we’re looking for

Physical/Mental Requirements/Work Environment

· Ability to understand protocols, technical reports and technology transfer documents.

· Ability to understand standard operating procedures and other related documents.

· Able to commit to weekend work when needed, off in lieu will be given for work on public holidays.

· Repetitive motions due to certain laboratory techniques.

· Good Understanding of Aseptic Techniques.

· Work performed in a clean room environment wearing PPE.

· Ability to define problems, collect data, establish facts and draw conclusions.

· Ability to focus regardless of circumstances and stress induced pressure.

· Ability to take proactive approach.

· Meticulous and systematic.

· Commitment to continuous learning and staying updated with industry best practices.

· Have a strong focus on safety, quality and timeliness.

· Have strong critical thinking skills.

Job Responsibilities

Sample and QC Process Management:

· Ensure all QC sample management, testing, including process validation, cleaning, raw materials, stability samples, water samples, etc., are planned and executed on time.

· Prioritize and plan all testing activities to support processing schedules.

· Plan QC testing on a FIFO basis to eliminate backlog and meet internal QC KPIs.

· Plan work assignments for all QC analysts based on the production plan.

· Support future setup of central QC lab for all BioSolutions within Esco Aster.

Leadership and Team Management:

· Lead the implementation of the Laboratory Information Management System (LIMS).

· Lead Quality Control SOP implementation.

· Collaborate with the Analytical Development Team and manage QC Analytical, Microbiology Team to manage the revision and/or change control of QC documents as needed.

· Ensure new Analysts and Specialists are trained appropriately.

· Supervise, develop, engage, and motivate a young and driven team of QC Team Members.

· Manage the routine operations of the QC lab, ensuring business delivery at the right quality, cost, and speed.

· Able to build and lead across functional department consisting of different QC functions and supervisors / deputies / subject matter.

Operational Oversight:

· Oversee several sub-teams such as sample management, reference management, regulatory management, and QC instrument and equipment management.

· Lead the team to comply with internal requirements in all aspects through end-to-end quality control system oversight.

· Ensure all activities in the QC team are performed in compliance with cGMP, data integrity, and EHS requirements.

· Keep up to date with the latest trends in Quality Controls Tools.

Training and Development:

· Oversee the training, evaluation, and management of staff in the QC lab, including coaching, developing, and supporting them to reach their full potential.

Regulatory Compliance:

· Manage GMP audits from regulatory authorities and clients, respond to audit reports, and create CAPAs as applicable.

· Support analytical method transfer activities.

· Author and review OOS/OOT and Deviation investigations for approval, maintaining investigation records in accordance with company policies.

Cross-Departmental Collaboration:

· Participate in Quality Risk Assessment Programs.

· Provide input and expertise on QC testing and practices for all departments.

· Serve as the QC representative for all customer and agency audits and support the audit of all 3rd party contract facilities.

· Oversee the management of Sample and Controlled Substance inventories.

· Provide technical support and advice on QC matters to other areas within the site: Production, Procurement, Supply Chain, Warehouse, and Process Developments.

· Work with Analytical Sciences and Technology (ASAT) to internal or external tech transfer from developed protocols from Analytical Development to Quality control including overseeing method verification, qualification, and validation activities.

Compliance Management:

· Participate in self-inspection and support client audits.

· Manage compliance tasks to ensure the Quality Control department is current and compliant.

· Maintain purchase orders, cost centers, and budgets for the QC department.

· Manage implementation and adherence to all applicable SHE and cGMP regulations.

· Support and oversee 3rd party test labs and ensure test labs are qualified per our QMS.

· Perform calibration and maintenance of QC laboratory equipment working with our CMMS and as per Iso 17025 standards and relevant GLP standards.

· Support/ oversee QC laboratory equipment/system qualification.

The job function listed is not exhaustive and shall also include any responsibilities as assigned by the Supervisor and Management from time to time to support GMP activities.

Requirements

· Bachelor’s degree in life sciences with minimum of 5 years of experience in Quality Control within highly regulated cGMP pharmaceutical industry. Experience is Biologics and ATMPs (i.e. Cell and Gene) is an added advantage.

· Candidates with experience in ATMPs (Cell & Gene) manufacturing are highly preferred but not mandatory.

· Familiar and keeping up to date with current GMP and applicable GxP regulations and standards; experience with regulatory requirements such as Singapore/HSA, US/FDA, EU/EMEA, etc.

· Good understanding of GMP requirements in release testing (Potency, Identity, Content, Impurities, Microbiological safety assays).

· Experience in HPLC, Flow Cytometry, ELISA, dPCR/PCR, Assays and method qualification.

· Proficient in MS Office Suite (Microsoft Word, PowerPoint, Excel).

· Strong analytical skills and the ability to interpret data to drive decisions and improvements.

· Able to work independently, self- starter, self-motivated and task oriented.

· Good communication skills and leadership skills to effectively collaborate with cross-functional teams.

· A thorough understanding of the principles and management of cGMP compliance, and a strong quality mindset.

· Must be able to work in a team as well as independently.

· Proven leadership and team management skills.

· Excellent communication and organizational skills.

· Experience with LIMS and other laboratory management systems.

· Experience in Laboratory Equipment Qualification is an added advantage.

· Will be able to commit 5 working days per week in a fixed pattern.

Apply now by submitting a Cover Letter and CV to [email protected].

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Software Quality Assurance (Audit, QA)

Our Esteemed and Reputable Client is looking for an Software Quality Assurance (Audit, QA)

Requirements:

• Solid experience in handling Projects Audit/ Quality Assurance and Checks.
• Strong experience in handling Quality Assurance and Software Governance.
• Good track record handling Quality Assurance Projects and Timeline.
• Involved in Projects Audit and Checks.
• Sound knowledge in handling quality improvement practices and processes on Projects.
• Experience in handling IT Quality Assurance, Process Improvement, Software Testing and Methodology.
• Minimum 3- 5 years of Software Quality Assurance and Audit Checks on Projects.
• Experience in performing Audit Checks on Projects
• Involved in handling Projects Quality Audit.
• Responsible for Project Audit/ Quality Management System procedures and processes.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Objectives of the position:

This role involves Customer Quality Support for LAP’s product distribution, addressing customer feedback and product quality requirements/issues. The person in this position will be responsible for handling customer feedback or requirements, such as complaints, test data, and other technical information as requested. This includes necessary communication with all stakeholders (Customer, Supplier, Customer Service, Production Planning, Supplier Management, Logistics).

Knowledge in cable testing or Electrical & Electronic (E&E) product testing, along with an understanding of technical specifications, will be required to comprehend customer complaints (both technical and logistical) and provide appropriate advice for resolution.

Key Responsibilities:

Manage Customer Complaint Processes

• Acknowledge the complaint
• Update the complaint in SAP & Customer complaint log
• Track the complaint & close the complaint once actions are completed
• Summarize complaints for monthly reporting (LOS & Q-reporting)
• Properly handle customers' needs by providing accurate and timely information on inquiries related to cable standards, test reports and complaint handling

Track Supplier Quality

• Conduct incoming inspections when required or prompted by customer complaints
• Update results in the SAP system and release inspected lots according to the defined usage decision
• Generate Supplier Corrective Action Requests (CAR) and track corrective actions by liaising with the supplier

Compliance with Standards

• Familiarize with and comply with international cable testing standards and procedures
• Contribute to achieving company and department KPIs through due diligence, duty of care, and personal accountability for quality assurance in all tasks

Liase with Stakeholders

• Effectively close customer complaints by liaising with relevant stakeholders

Maintain Records

• Maintain records in SAP and other relevant records

Operate Laboratory Test Equipment

• Operate laboratory test equipment when required for the validation of complaints

Assist with Customer Technical Enquiries

• Assist with product test reports, RoHS, REACH, and CE inquiries

General Assistance

• Assist in other day-to-day activities related to the QA department as assigned by your superior

Skills & Qualification:

• Min. Diploma in Engineering (Electronics / Electrical) or equivalent
• Min. 1 year of experience in electrical / electronic product testing and qualification
• Knowledge in ISO 9001: 2015 QMS standard will be added advantage
• To be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).
• Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage
• Good written and communication skills in English
• Good customer handling skills and able to communicate to all levels in the organization
• Proficient in Microsoft Words, Excel & Power point
• Addresses present issues immediately and independently
• Possess self-confident and willing to share opinions and expertise in discussions
• Anticipate potential problems and takes action to avoid crisis
• Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Quality Assurance/ Tester shall be as follows:

a) Understand and document business processes, workflow and user story;

b) Perform checks under both functional and non-functional scopes of testing;

c) Review, develop and align test plan, test cases, scenarios and strategies, ensure adherence to quality standards;

d) Perform manual and automated testing using Tricentis TOSCA, including preparing test data when necessary;

e) Develop and maintain automated test scripts;

f) Review, support and participate in functionality and technical testing such as performance testing, security, interface integration and usability testing;

g) Review test reports and results of the Authority’s appointed contractors for the Authority’s systems;

h) Collaborate and coordinate with system stakeholders and Authority’s appointed contractors for testing;

i) Review test process and recommend improvement, which includes analysing test processes and methodologies, identify area for improvement and recommend process optimisations and best practices; and

j) Manage test activities and ensure the planned test activities are completed as scheduled.

Quality Assurance/ Tester proposed by the Contractor shall have at least 3 years of experience as a Quality Assurance/ Tester or equivalent position and the following skill sets:

a) Bachelor’s degree in computer science, Computer or Electronics Engineering, Information Technology or related disciplines would be preferred;

b) Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage;

c) Strong analytical skills, meticulous attention to details, good interpersonal skills such as tactfulness, good presentation and listening skills;

d) Experience in the following would be advantageous:

i. Automated testing tools such as Tricentis TOSCA; and

ii. Testing for government public services.

e) Good written and verbal communication and presentation skills, able to interact professionally with all levels of the organisation.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

About the job

Established in 1980, Esri Singapore is one of the most recognized contributors to the country’s geospatial community and smart nation initiatives, assembling an impressive track-record of successfully delivering projects and services to major organizations in public services, national security, built environment, supply chain organizations and private enterprises.

As digital transformation trends continue to permeate all types of organizations and services, geospatial technology will continue to be an important aspect of that paradigm shift – empowering people with spatial thinking, sense-making and insight.

With the geospatial domain set for tremendous growth and change in the years to come, Esri Singapore is well positioned to be a major contributor in the ever-evolving GIS landscape.

Our Core Values

Integrity – we value honesty and ethics to maintain trust.

Excellence – we strive for continuous improvement and growth.

Creativity – we use geographical insight to think differently and make a difference.

Empathy – we respect and share understanding of the needs of our clients and of each other.

About the Role

Are you looking to map a better future? Esri Singapore is one of the most recognized contributors to the country’s geospatial community and smart nation initiatives, assembling an impressive track-record of successfully delivering projects and services to major organizations in public services, national security, natural resources, critical infrastructure, supply chain organizations and private enterprises.

We are seeking a highly skilled (Senior) Quality Assurance Engineer to join our dynamic team. As the (Senior) QA Engineer, you will oversee and participate in all aspects of quality assurance including designing test strategies, writing test plans, reviewing requirements, executing test cases, and leading a team of QA engineers.

You will collaborate closely with software engineers, product managers, and other stakeholders to ensure high-quality software releases. The ideal candidate will have a strong background in QA methodologies, leadership experience, and a passion for delivering high-quality products.

Your key responsibilities will include:

• Develop and implement QA strategies, test plans, and test cases based on product specifications.
• Lead and mentor a team of QA engineers, providing guidance and fostering a culture of quality within the team.
• Review and analyze system specifications, collaborate with stakeholders to understand requirements, and ensure comprehensive test coverage.
• Design, prioritize, and execute automated and manual test cases to validate functionality, performance, and scalability of software applications.
• Identify, document, and track bugs and issues, working with development teams to troubleshoot and resolve issues in a timely manner.
• Implement and maintain automated testing frameworks and tools to support continuous integration and delivery pipelines.
• Monitor QA metrics and report on test progress, test coverage, and defect metrics to stakeholders.
• Collaborate with cross-functional teams to define acceptance criteria and ensure quality standards are met throughout the software development lifecycle.
• Stay current with industry best practices, tools, and techniques for QA and share knowledge with the team.

About You

Reporting to the Manager, Application Services you will offer a minimum five years’ experience in software quality assurance, with 3 years in a leadership or senior QA role.

To be successful in this role with us, you will bring along:

• Bachelor’s degree in computer science, Engineering, or a related field; or equivalent professional experience.
• Proven experience leading and managing a team of QA engineers in an Agile environment.
• Strong understanding of QA methodologies, tools, and processes.
• Experience in designing and implementing test automation frameworks using tools such as Playwright, Selenium, JUnit, TestNG, etc.
• Hands-on experience with API testing, database testing, performance testing, and security testing.
• Excellent analytical and problem-solving skills, with a meticulous attention to detail.
• Strong communication and interpersonal skills, with the ability to effectively collaborate with technical and non-technical stakeholders.
• Ability to thrive in a fast-paced environment and manage multiple priorities effectively.
• Experience with CI/CD pipelines and tools (e.g., DevOps, Jenkins, GitLab CI). (Preferred)
• Knowledge of containerization and orchestration tools (e.g., Docker, Kubernetes). (Preferred)

Why Esri Singapore

At Esri Singapore, we foster an inclusive, people-centric environment that values both professional excellence and personal well-being. Joining us, you will be provided with:

• Investment in your Growth: Access dedicated training and development programs, allowing you to continuously upskill and grow in your role.
• Career Advancement: We promote internal mobility, and provide clear pathways for career progression, empowering you to navigate and elevate your professional journey.
• Appreciation and Engagement: Enjoy a range of benefits, including Family care leave, Birthday leave, Referral Fees, Long Service Awards and much more.
• Performance Recognition: Experience a financially rewarding Profit Share Bonus.

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Description

Some careers grow faster than others.

If you’re looking for a career that will give you plenty of opportunities to develop, join HSBC and your future will be rich with potential. Whether you want a career that could take you to the top, or simply take you in an exciting new direction, HSBC offers opportunities, support and rewards that will take you further.

HSBC Life in Singapore is the combination of AXA Singapore and HSBC Insurance. Here you can specialize in Insurance but enjoy the advantages that come with being part of a leading global international bank

Insurance is about people, and the promises they make. At HSBC Life in Singapore we help deliver on these promises by providing a wide variety of life insurance products and services to our clients throughout the Asia-Pacific region. Our employees enjoy a dynamic and innovative workplace and a world of opportunities to develop their careers in a high-profile growing business segment. We empower our combined team of high-performing individuals to build skills and explore new experiences to realise the full potential of being part of HSBC.

Together we will pursue efficient ways of working. We will harness the latest data and technology solutions to achieve meaningful outcomes for our clients. And the protection we offer will create broad and lasting impact, helping clients to be healthier, more productive and more confident in their futures.

We are currently seeking a high calibre professional to join our team as a Capability and Quality Management Specialist.

Principal Responsibilities

• Evaluate individual staff performance through regular quality audits to ensure all customer interactions meet professional, quality and compliance guidelines
• Conduct regular call sharing with staff to ensure alignment of best practices and high service standards
• Develop and maintain quality standards and procedures in collaboration with cross-functional teams
• Conduct thematic analysis examining themes across multiple products, services or processes to identify trends, patterns and common issues
• Identifying training and development needs through analysing data to identify areas of improvement
• Supporting in the design of training and development programmes based on the needs of the organization and the individual
• Supporting in evaluation of training and development programmes

Qualifications

• Degree / Graduate with knowledge/working experience of Singapore Insurance is preferred
• Demonstrates understanding of customer needs and behaviour
• Ability to communicate cross functionally
• Good learning attitude, analytical, problem solving and with good time management skills
• Excellent interpersonal and communication skills with an ability to write well
• Experience in a customer service environment or related position, preferably in a financial industry
• Committed, self-disciplined, Customer Service oriented, able to multitask with an eye for details
• Ability to work independently, and with high level of initiative in a high pressure and tight timeline environment
• Team worker, works well under pressure and self-driven

To be considered for this role, the relevant rights to work in Singapore is required.

You’ll achieve more when you join HSBC.
www.hsbc.com/careers

HSBC is committed to building a culture where all employees are valued, respected and opinions count. We take pride in providing a workplace that fosters continuous professional development, flexible working and opportunities to grow within an inclusive and diverse environment. Personal data held by the Bank relating to employment applications will be used in accordance with our Privacy Statement, which is available on our website.

Issued by The Hongkong and Shanghai Banking Corporation Limited.

Video URL - External

https://www.youtube.com/watch?v=y4LU9-uRd_4

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Are you passionate about ensuring the highest quality in software services? We are seeking a Software Quality Engineer (QE) to join our team responsible for developing and maintaining disbursement system . As a QE, you will play a critical role in ensuring that our services are reliable, secure, and meet the needs of our users.

What to Expect:

• Test Planning & Maintenance: Create and maintain test cases and plans, ensuring they reflect the latest requirements and policy changes.
• Automation & Framework Development: Build, maintain, and improve automated testing frameworks and environments to enhance testing efficiency.
• Hands-on Testing: Conduct various forms of testing such as manual, functional, performance, and exploratory tests, and file defects when necessary.
• User Acceptance Testing (UAT): Support UAT activities, ensuring the system functions as expected before release.
• Production Support: Assist in resolving production cases to maintain high-quality operational systems.
• Agile Collaboration: Actively participate in all agile ceremonies, including stand-ups, sprint planning, and retrospectives.

Requirements:

• Educational Background: A degree in software engineering, computer engineering, electrical engineering, or an infocomm-related discipline.
• Testing Experience: At least 3 years of professional software quality testing experience with hands-on automation experience.
• Technical Skills:Strong understanding of testing techniques, test-driven development, and continuous integration/delivery.
  Experience with Java and Spring Boot frameworks is a plus.
  Familiarity with automated testing frameworks (Selenium, Cucumber, JUnit) or enterprise tools (HP UFT, QC, Mobile Center).
  Experience with performance testing tools like JMeter, Gatling, or enterprise tools such as HP LoadRunner.
  Knowledge of penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise-level tools (WebInspect, Nessus, CheckMarx).
• Agile Experience: Working experience in Agile environments is highly preferred.
• Soft Skills: Excellent verbal communication and listening skills, coupled with a proactive, self-driven, and motivated attitude.

Why Join Us?

• Be part of a team improving the quality of essential public services in Singapore.
• Work in an Agile environment that values continuous improvement and innovation.
• Enhance your skills in test automation, security, and performance testing using cutting-edge tools

• Working days: 5 / 6 days alternate
• Working Hours: 830am-530pm
• Salary: $2000 - $2400
• Working Location : Bedok

Job responsibilities

• Conduct detailed inspections of finished products to identify defects, non-conformities, and deviations from quality standards.
• Support quality in handling defective found during the production
• Collaborate with the quality control team to resolve material quality issues and determine disposition (accept, reject, or rework)
• Collaborate with the production, quality teams to identify root causes of defects and non-conformities
• Perform FA report, and propose process improvements.
• able to use calliper, OGP , Keyence, Drop gauge , micrometre, pin gauge
• able to interpret 2D drawings
• ⁠collect parts for 2 hourly to visual inspection
• ⁠key in data

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Onshore Quality Assurance/ Tester

1. The scope of Services for the One (1) Onshore Quality Assurance/ Tester shall be as follows:

a) Understand and document business processes, workflow and user story;

b) Perform checks under both functional and non-functional scopes of testing;

c) Review, develop and align test plan, test cases, scenarios and strategies, ensure adherence to quality standards;

d) Perform manual and automated testing using Tricentis TOSCA, including preparing test data when necessary;

e) Develop and maintain automated test scripts;

f) Review, support and participate in functionality and technical testing such as performance testing, security, interface integration and usability testing;

g) Review test reports and results of the Authority’s appointed contractors for the Authority’s systems;

h) Collaborate and coordinate with system stakeholders and Authority’s appointed contractors for testing;

i) Review test process and recommend improvement, which includes analysing test processes and methodologies, identify area for improvement and recommend process optimisations and best practices; and

j) Manage test activities and ensure the planned test activities are completed as scheduled.

2. The One (1) Onshore Quality Assurance/ Tester proposed by the Contractor shall have at least 3 years of experience as a Quality Assurance/ Tester or equivalent position and the following skill sets:

a) Bachelor’s degree in computer science, Computer or Electronics Engineering, Information Technology or related disciplines would be preferred;

b) Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage;

c) Strong analytical skills, meticulous attention to details, good interpersonal skills such as tactfulness, good presentation and listening skills;

d) Experience in the following would be advantageous:

i. Automated testing tools such as Tricentis TOSCA; and

ii. Testing for government public services.

e) Good written and verbal communication and presentation skills, able to interact professionally with all levels of the organisation.

Senior Software Quality Analyst (Contract)

Salary : $5000 to $10000

Job Description & Requirements

· Develop and maintain automated test framework on Java

· Expertise in Test lifecycle including Requirement Analysis, Identifying Test Scope,Designing Test cases,Executing Test cases, and tracking defects till closure

· Have worked in Agile project models

· Familiar and equipped with agile testing experience in scrum-based/Kanban based projects.

· Experience in scrum ceremonies like backlog grooming and refinement, sprint planning, daily scrum, sprint review, sprint retrospective etc

Requirements:

· QA analyst with minimum of 7 years’ experience in test automation preferable in financial services domain

· Good to have knowledge and experience in Equities or Derivatives trading

· Testing experience with Industry standard APIs used in Financial Services domain (e.g. Financial Information eXchange (FIX), FIXML, REST)

· Experience in test automation framework using BDD framework with Cucumber & TestNG

· Experience on Selenium Web Driver, Postman(API Testing)

· Experience on Build and Configuration Tools like MAVEN

· Experience on CI/CD Tools like Jenkins and version control via BitBucket or GitHub

· Good understanding of Java Libraries - REST Assured

· Have used IDEs like IntelliJ and Eclipse

· Programming Languages - Core Java

· Working knowledge of proprietary or industry standard tools such as Tricentis Tosca, VeriFIX, is a plus.

· Able to guide and mentor junior test resources

· Ability to communicate clearly both in writing and verbally

· Excellent stakeholder management skills to engage across various departments such as Technology,Operations and Business

· Team player with a collaborative mind-set

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Who We Are
BD is a leading global medical technology company that creates medical technology, devices and laboratory equipment for a variety of needs across the healthcare sector. At BD, we are looking for candidates who possess passion, innovative solutions and a commitment to our one mission of improving access to groundbreaking medical and biotechnology services for people near and far, delivering state-of-the-art technology and cutting-edge research in the battle to fight and cure infectious diseases. With a global reach that extends across 50 countries worldwide, our network of professionals collaborates on effective measures to deliver enhanced patient quality such as lower health care delivery costs, improved health care and safety, and expanded health care for all. Join our company and see how you can become a part of one global mission to make a difference in human health.

Job Purpose:

Performs a variety of quality assurance activities to ensure successful completion of projects or aspects of large programs. Applies technical expertise and knowledge of advanced statistical techniques to support engineering work in the design, development, and evaluation of medical devices. Supports development and successful implementation of quality systems and procedures. Supports maintenance and expansion of QMS as required. Frequent inter-organization contacts on technical matters often requiring coordination between organizations.

Job Responsibilities:

• Leads or assists in the development of, and continuous improvement of, quality systems for R&D in compliance with 21 CFR 820, ISO 13485 and EN requirements with specific focus on design control.
• Ensures compliance with BD quality policies, procedures, and practices through appropriate communication, training, and education of sound quality assurance principles.
• Contributes as a team member on development projects carrying out assigned quality assurance responsibilities.
• Promotes advanced understanding of customer needs and processes to ensure relevant and innovative product development.
• Applies Design to Cost and Design for Manufacturability methods to support project leader in achievement of project objectives.
• Supports cross-functional planning, coordination, and reviews.
• Leads Risk Management plans/ reports and situational analyses for products under design authority.
• Promotes the use of statistics in the testing and control of quality. Applies Six Sigma methodology to support product development process.
• Actively mentors associates in related technical roles. Provide technical direction and frequent feedback. Participate and assist in their success.
• Contributes to assembly and maintenance the Design History File (DHF).
• Supports quality initiatives for plant issues.
• Any other tasks as assigned.

Our Requirements:

• Bachelor’s degree in mechanical engineering, biomedical engineering, or related engineering discipline.
• At least 5 years working experience in medical device industry.
• Good working knowledge of medical device regulations and practices (ISO 13485, 21 CFR 820, etc.)
• Good knowledge and understanding of process development, total quality tools, and continual improvement approaches.
• Complete understanding of quality assurance principles and concepts, total quality tools, continual improvement approaches, industry practices, and standards.
• Advanced understanding of design control, disciplined product development processes, regulatory, and quality requirements.
• Advanced knowledge of Six Sigma methodology, statistical methods and analysis.
• Ability to translate customer needs into design inputs and specifications.

Culture and Benefits

Here at BD, we embrace a growth mindset, building capabilities for the future and helping you become the best version of yourself. We offer our employees a clear direction and career pathway for development. We pride ourselves on our transparent and rigorous talent processes that are inclusive, deeply embedded in trust, aligned with our culture, and enable us to achieve strategic imperatives of the organization. Our leaders are committed, engaged and accountable to making talent our top priority.

How To Apply

Submit your application by clicking on the “apply” button at the top of the page.

Primary Work Location

SGP Tuas - Tuas

Responsibilities:

• Establish and maintain a Project Quality System in accordance with Singapore standards.
• Monitor legal and regulatory compliance requirements and performance, implementing preventive programs to mitigate potential non-compliance.
• Assess the implementation of Quality Plans and Quality Control Plans at sites to ensure they adhere to project specifications and contract requirements.
• Conduct periodic site visits to perform detailed and recorded checks on quality, processes, and safety to ensure adherence to industry and company standards.
• Ensure adequate corrective measures are implemented in cases of non-compliance.
• Liaise with authorities, vendors, sub-contractors, and external parties on project quality matters and improvement requirements.
• Conduct and support QMS internal and external audits, ensuring the closeout of all inspection and audit non-conformities.
• Attend client quality management meetings.
• Coordinate final handover documentation activities to ensure a smooth transition.
• Provide and organize staff training on quality matters, including materials, workmanship, health, safety, and environmental issues.

Requirements:

• Minimum Degree in Engineering or related field
• ISO 9001: 2015 Lead Auditor Certificate
  At least 8 years of QA/QC experience in mixed developments and LTA projects

Kindly email your resume in a comprehensive Word format to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertised position, the candidate is considered to have given their consent for us to collect, utilize, or disclose their personal information for the purposes related to the services we provide.

Jacqueline Goh

EA License Number: 22C1430

Registration Number: R1326664