· Drive Technical and Maintenance support to all operating facilities in instrumentation and control systems, including ICSS / DCS / PLC

· Ensure the installations are maintained and managed with respect to regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore facilities in terms of Instrumentation and Control Systems

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Participate in planned shutdown as and when required

· Review and provide the engineering solutions for Management of Change Request from Facilities as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide in-house training for the offshore team as and when required

· Carry out competency evaluation for onboard E&I Supervisors and Instrument technicians as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating facilities

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required

• To promote a Zero Harm culture & best practices through the implementation of a tailored safety, quality and environmental management system including the development and implementation of appropriate policies & procedures to ensure a safe and efficient workplace.
• To ensure regulatory compliance & due diligence to safety, health, quality, dangerous good/hazardous substances and environmental obligations.
• To liaise with all business units on matters relating to safety, quality and environment including potential non-compliance of a regulatory nature.
• Compliance with all relevant safety, quality, environmental & P&C policies & procedures to ensure a safe work environment at all times.
• Actively liaise with all departments to ensure quality control, quality assurance and safe practices are adhered to at all times.
• Work with A-Gas management to implement its policies, procedures, work instructions, mission and goals.
• Lead by example in demonstrating personal qualities, behavioural traits and A-Gas values & behaviours.
• Timely management reporting in the manner and form as required from time to time.
• Perform site inspections as required.
• Actively participate in internal & external project meetings and provide sound recommendations on SQE initiatives and/or highlight any deviations & possible risks if any.
• Manage & maintain integrated certified Safety, Quality, Environmental management systems to ensure continued compliance to ISO 9001, ISO45001, ISO14001, ISO17025 (NATA), and other relevant standards like ISO 31000 where applicable.
• Identify and maintain compliance to relevant WHS, Environmental & other acts, regulations, codes of practices & guidelines etc.
• Audit SQE Management System, including reviewing, monitoring, measuring, reporting on performance.
• Recommend and implement continual improvement to the SQE system, work instructions and associated processes.
• Promoting awareness of SQE requirements, communicating and consulting with all staff & other stakeholders on SQE processes, documentation and regulatory requirements.
• Development and implementation of SQE documentation relevant but not limited to procedures, plans, hazard and aspect identification, risk assessments, emergency preparedness & response, design & development, management of change, control measures, management review including ad hoc measures based on current environmental occurrences.
• Actively lead & participate in Operational Safety, Process Safety, Risk Assessment, HAZOPs, Pre-Purchase Risk Assessments, Management of Change & Design & Development, SQE incident investigation & root cause analysis and processes.
• Active participation and collaborating to provide SQE / technical advise as required to the Lab Team, Customer Service, Operations, Engineering, Rapid Recovery and wider A-Gas Group & other relevant stakeholders.

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

5 Days! Pest control technician / supervisors.

We are seeking experienced pest control technicians/ supervisors to join our team!

$1800 to $2500

Contact HR@ 91383851 for an interview!

Job Scope:

• Fogging / Misting
• Pest control management
• Client relations
• Preparation of reports
• All Pest control activities

Working days: 5 Days

Work timing: 8 - 4pm

Contact HR@ 91383851 for an interview!

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

Join their Control and Instrumentation team as a maintenance expert, responsible for ensuring the optimal performance of instrumentation and control systems in their power plant.

Below are some of the key responsibilities for the role;

• Executing maintenance work efficiently and effectively, with a focus on safety and regulatory compliance
• Troubleshooting and rectifying equipment failures and malfunctions
• Testing and recommissioning rectified systems and equipment
• Performing overhaul, inspection, calibration, and servicing tasks during scheduled plant outages
• Implementing modification and upgrading plans to enhance system reliability and availability
• Maintaining detailed records and reports using computer-based software (Maximo, MS Word, and MS Excel)
• Assisting Engineers and Technical Officers in maintenance work
• Supervising contractors and ensuring compliance with safety standards

What you'll need to succeed

The successful candidate, should have;

• Diploma/NITEC in Electronics Engineering
• Knowledge of Instrumentation and control systems
• 2 years of experience in the Power Plant or Oil and Gas industry (preferred)
• Self-driven and team-oriented with a positive work attitude
• Availability for standby and emergency calls
• Strong safety mindset and good workplace safety behavior
• Willingness to be part of the CERT team and participate in emergency responses

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Job Details:

• Duration Needed - 2 Month
• Mon to Saturday - 6 Days work per week
• Project at Jurong Pier Sub station
• Conduct regular inspections and risk assessments at the workplace to identify any foreseeable risk arising from the workplace.
• Recommend reasonable measures to eliminate any foreseeable risk at the workplace
• Ensure all statutory regulations are comply with NEA’s requirements
• Prepare and submit weekly environmental report
• Enforce & improve Workplace Safety and Health / Environmental Control standard at the workplace
• Any other duties as assigned by superior(s)

Job Summary:

We are seeking a highly skilled and motivated Planning and Control Engineer to join our team for a 12-month contract. The successful candidate will be responsible for managing and controlling project schedules, coordinating resources, and ensuring that projects are completed on time and within budget. This role requires strong analytical skills, proficiency in project management tools, and the ability to work collaboratively with cross-functional teams.

• Duration: 12 months
• Mobilization: Immediate
• Transportation: Not provided
• Working Schedule:Monday to Thursday: 7:30 AM to 5:30 PM
  Friday: 7:30 AM to 4:30 PM
  Total Hours per Week: 44 hours
  

Key Responsibilities:

• Develop, monitor, and update project schedules using project management software (e.g., Primavera P6, MS Project).
• Work closely with project managers, contractors, and stakeholders to ensure timely project execution.
• Conduct project planning and control activities, including resource allocation, budgeting, and cost control.
• Track project performance, identifying deviations from the plan, and recommending corrective actions.
• Prepare and present project reports, including progress reports, forecasts, and performance analysis.
• Assist in risk management by identifying potential delays and providing mitigation strategies.
• Ensure the alignment of project timelines with business objectives.
• Maintain accurate and up-to-date records of project schedules and changes.
• Coordinate with other departments to resolve issues and optimize the project delivery process.

Requirements:

• Education: Bachelor’s degree in Engineering, Project Management, or a related field.
• Experience: Proven experience as a Planning and Control Engineer or similar role in [relevant industry, e.g., construction, manufacturing, oil & gas, etc.].
• Technical Skills:Strong proficiency in project management software such as Primavera P6, MS Project, or similar tools.
  In-depth knowledge of project scheduling, cost control, and resource management.
  
• Soft Skills:Excellent analytical, problem-solving, and organizational skills.
  Strong communication and interpersonal skills, with the ability to collaborate effectively with stakeholders.
  
• Other Requirements:Ability to work under pressure and manage multiple projects simultaneously.
  PMP or similar project management certification is a plus.
  

How to Apply:

Interested candidates should submit their resume [email protected]

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Responsibilities:

• Mainly involved in credit control matters; accounts receivables & accounts payables (AR/AP).
• Follow up with the collection of non-payments, delayed payments and other irregularities.
• Liaise with customers on statements of accounts and invoices, issue dunning letter accordingly.
• Ensure prompt updating of receipts from customers.
• Maintain accurate records of all chasing activities.
• Timely month-end closing for accounts receivable function.
• Assist in annual audits.

Requirements:

• Diploma in Accounting/Finance or related disciplines
• 2 years of work experience in accounting/finance, preferably within a digital marketing agency environment but not a MUST HAVE.
• Analytical Skills and knowledge of accounting principles to analyze financial reports and forecast.

Job Responsibilities:

• Inspect and identify potential hazards in the workplace to ensure a safe environment.
• Conduct regular inspections of work areas to verify compliance with workplace safety and health regulations.
• Inspect and assess equipment to confirm it is in good working condition and does not pose environmental or health risks to users or the workplace.
• Recommend and implement solutions to address unsafe practices or conditions in the workplace.
• Perform risk assessments on work sites to identify and mitigate potential dangers.
• Prepare detailed reports on workplace safety assessments and findings.
• Manage all environmental health-related matters, including:
  1. Control and prevention of disease-bearing insects and rodents.
  2. Proper disposal and management of construction waste.
  3. Monitoring and mitigation of noise, air, and dust pollution.
  4. Prevention of earth littering and maintaining site cleanliness.
  5. Addressing siltation in drainage systems.
  6. Ensuring food hygiene standards are upheld in workers’ canteens, if applicable.
  7. Overseeing any other environmental health concerns.

Requirement:

• Diploma in any field.
• Registered Environmental Control Officer with NEA.
• At least 3 years of working experience.
• Preferably personnel specialized in Building Construction - Environmental/ Health/ Safety or equivalent.
• Candidate who possesses high experience will be considered for senior role.

Responsibilities

• To carry out various pest maintenance and rodents eradication works at Animal holding facilities, exhibits, habitats, aviaries and its surrounding areas
• To carry out potentially strenuous jobs, able to work diligently with minimal supervision, meticulous
• To Understand conditioning method and positive-reinforcement training.

Requirements

• Vector Control Operator, Vector Control Technician (VCT) and Vector Control Worker (VCW) licensed/certified.
• 2 years working experience in pest control, physically fit and healthy to work outdoors and carry out potentially strenuous jobs, able to work diligently with minimal supervision
• Creativity for the design of mechanical traps.
• Enthusiasm and willingness to free aviaries of rats.

An exciting opportunity as a Planning and Control Engineer awaits the successful candidate.

Responsibilities:

· Read the Contract and understand the overall project strategy to make proper planning evaluations of the work scope

· Support the project planning team on site, receive the planning and control data, analyze and identify risks or potential problems in the project progress, present the findings to the management team

· Participate in the planning meetings and all related meetings to be aware of the main concerns and issues of the project on the site

· Comment the reports, the schedules and all the data issuances related to the site scope, warn/alert the management team if any inconsistence or anomaly is found

· Liaise between the Planning and the Construction and Assembly (C&A) teams regarding the activities happening on site, and check if the activities are happening in accordance with the last updated plan and schedule issued

Requirements

· 5 (five) years of experience in similar services in the Oil and Gas industry

· Expert understanding of planning software such as Primavera P6, MS Project, and similar

· Expert understanding of project management parameters such as WBS, Project Risks, Project Schedule, and others within the PMBOK area of knowledge

· Experience in developing, analyzing, and adjusting Schedule in Primavera P6 software for big or complex projects

· Experience in Critical Path Report issuance and analysis

· Execution of daily/weekly reports and activities controls

· Expert understanding of Key Performance Indicators (KPIs) and control curves (S-curves, Rundown curves)

· Advanced use of Office package software such as Power Point, Word, and Excel

· Experience in FPSO construction and commissioning

· Good communication skills in English language

· Flexible working at Yards

Our esteemed client, an established MNC, is searching for a Control Room Assistant:

Job Responsibilities:

• Monitor and oversee the performance of control room systems, ensuring equipment and systems function effectively.
• Maintain accurate records of system performance, incidents, and maintenance activities.
• Provide administrative support and handle ad-hoc duties as assigned.
• Ensure adherence to operational protocols and safety procedures within the control room.
• Collaborate with other departments to escalate and resolve issues efficiently.

Job Requirements:

• Minimum GCE O Level or equivalent qualification.
• Strong attention to detail and the ability to identify and report issues promptly.
• Basic computer proficiency with familiarity in monitoring systems or equipment.
• Good communication skills with a proactive and problem-solving mindset.

Additional Information:

• Salary: Up to SGD 2,600 + VB ( 1 Month )
• Working Location: Tuas Crescent
• Working Hours: Monday to Friday 8:00am - 6:00pm
• Meal will be provided

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

• Join a renowned chemical manufacturing company
• Attractive Benefits

Job Description

Collaboratively enhance internal controls for the company - the South East Asia regional representative of the company in Japan, and its group companies across Singapore, Malaysia, Vietnam, and other locations.

Responsibilities:

1. Evaluate Internal Control of the Group Companies:

• Perform work process evaluations through audits.
• Plan the audit scope and schedule.
• Organize and coordinate meetings with auditees.
• Evaluate work processes and their status by checking evidence and conducting interviews online/on-site.
• Steer activities and monitor progress to meet audit goals.
• Detect findings with rational reasonings.
• Document audit reports, finding memos, and working papers in accordance with audit deliverable requirements.

2. Support Improvement Activities of the Group Companies:

• Suggest remedy plans for improvement on the detected findings.
• Support remedy actions closely and collaboratively with auditees.
• Monitor remedy progress and provide advice and consultation.

3. Suggest and Support Improvement for Organizational Internal Control:

• Work with back-office departments to provide solutions for internal control-related issues.
• Dicuss matters with relevant stakeholders cross-functionally.

4. Support Activities Led by Headquarters in Japan:

• Support J-SOX activities for group companies in Southeast Asia.
• Coordinate with internal auditors in Japan and external auditors.

5. Additional Responsibilities:

• Perform additional tasks, including ad-hoc and unplanned activities.

Requirements:

• Bachelor’s degree in a relevant field.
• At least 3 years of experience in internal/external audit and/or internal control promotion.
• Experience in manufacturing is a plus.
• Good knowledge of internal control, auditing techniques, accounting procedures, etc., with a continuous learning attitude.
• Professional attitude emphasizing objectivity, fairness, integrity, and ethics.
• Excellent organizational and interpersonal communication skills to interact effectively with multi-cultural stakeholders at all levels.
• Good verbal and written communication in English (Japanese proficiency is a plus).
• Proficiency in MS Office applications (Word, Excel, PowerPoint).
• Ability in data analysis (Excel), logical thinking, multi-tasking, and high attention to detail.
• Skills in project/task management, leadership, and teamwork.
• Proactive work attitude with a high level of commitment and initiative.
• Holder of certifications related to internal audit/internal control (e.g., CPA, CIA, CFE) is a plus
• Knowledge of ERP systems is a plus

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

Join their Control & Instrumentation team as a key player in ensuring the reliable and efficient operation of their power plant's control systems and instrumentation.

Below are some of the key responsibilities for the role;

• Lead the execution of maintenance work, ensuring compliance with safety and regulatory requirements
• Respond to plant failures and forced outages, ensuring timely rectification and restoration
• Plan and execute plant overhaul activities with a focus on safety and timeliness
• Develop and implement modification and upgrading plans to enhance system reliability and availability
• Manage procurement and maintenance needs, including spare parts and external services
• Lead and develop a team of technical officers and technicians
• Demonstrate expertise in Control and Instrumentation, safety, and statutory requirements
• Showcase strong work ethics, analytical skills, and communication abilities
• Be available for emergency calls and participate in CERT team responses

What you'll need to succeed

The successful candidate, should have;

• Degree in Electronic & Electrical Engineering or equivalent
• Sound knowledge of Control and Instrumentation
• Good working knowledge of safety and statutory requirements
• Strong work ethics and team player mentality
• Analytical, technology, and communication skills
• Availability for standby and emergency calls
• Knowledge of cyber security (advantageous)
• Safety mindset and good workplace safety behavior

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

We are looking for one technically strong and motivated Manager to support the Assurance R&Q Independence Office.

How will you value-add?

• Provide consultation advice to professionals from various Lines of Service, who seek input for a variety of personal, system and engagement-related independence queries
• Conduct various independence compliance activities such as:
  1. Personal independence compliance testing
  2. Run the Annual Compliance Confirmation activity
  3. Data quality reviews
• Assist in management of independence systems
• Provide support in collation of information and statistics for local, global and regulatory reporting purposes
• Develop relevant independence practice aids, templates and training materials to aid professionals in the firm in complying with independence requirements
• Project manage global or local initiatives as required

About you

• Audit experience preferred
• Have good project management skills
• Possess high level of accuracy and attention to detail
• Have strong analytical & problem-solving skills
• Enjoy meeting people and have the confidence and maturity to deal with all levels of staff
• Has the willingness to learn and deliver timely and quality results

As the Facilities SmartFac & Control Engineer, you are required to lead engineering and maintenance works in the fields of SMART Fac and Control systems on site, with the necessary guidance and direction from Facilities organization, to achieve facilities department, site, facilities corporate and company goals.

• Lead on site Smart System transformation and on implementation of Smart FAC projects with AI-enabled detection and analytics in collaboration with other Micron Departments.
• Lead on Sustainability and Environmental Control system deployment with early detection and predictions, using Industry 4.0 system.
• Lead on labor productivity automation projects with innovative idea to improve facilities team efficiency.
• Plan, design and lead Control Automation engineering projects includes new construction, system upgrading and quality improvement.
• Lead troubleshooting and attend to abnormalities in support of Operations in a timely manner on system under Smart FAC & Control section when required.
• Lead on the planning and supervise Preventive and Corrective Maintenance work activities, priorities and reallocate resource when required.
• Perform capacity tracking and planning for Instrumentation and Control systems.
• Acquire estimated cost and raise purchase requisition for service or parts necessary for repair and maintenance purpose, when required.
• Utilize computer base software to document and analyze records of work order and equipment history.

Job Requirements:

• Bachelor Degree in Electrical/Electronics/Computer engineering or equivalent related field.
• Good knowledge on Python, Java, C/C++, C#, SQL, machine learning.
• Good knowledge in programming of programmable logic controller (PLC) and process automation PID control.
• Good knowledge of various handheld tool, portable and panel measuring device and equipment.
• Ability to understand and use schematic, single-line drawing and related equipment and system documentation
• Ability to work in a team environment with various professional level.

Job Description:

• Monitor and verify that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Monitor and verify that environmental impacts are kept to a minimum during the planning and design and construction phases of the project.
• Conduct surveillance, monthly inspections and detailed audits.
• Compile and complete checklists in order to aid the surveillance and inspection requirements.
• Keep records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Recommend the issuing of penalties to the Engineers Representative for contravention of the EMP.
• Prepare and submit a Site Environmental Control Programme and Site Environmental Control Reports to the Occupier of the construction site.
• Identify environmental issues and recommend measures to rectify the irregularities.
• Prepare and submit a Site Environmental Control Report to the Occupier of the construction site.
• Assist the authorities to investigate environmental issues.
• Organise campaigns, training courses and other activities to develop and sustain the interest of workers in maintaining good environmental health standards.
• Any other duties /responsibilities as assigned by the Reporting Manager.

Job Requirement:

• Registered with National Environment Agency (NEA).
• Good knowledge of ECO Scheme and Environmental Laws.
• At least 5 years relevant working experience in construction industry; particularly civil works or in LTA project, or similar scale, complexity and nature of work will be advantages.
• Familiar with Occupational Health & Safety Management System.
• Good team player and able to work independently with positive attitude.
• Working Location- Tampines Area.
• 6 Days work week.

Job Description

• Perform pest control treatments and inspections at clients' premises such as F&B, condominiums, landed properties, and commercial properties.

• Provide relevant advice to clients to mitigate and prevent pest issues.

• Ensure the service provided is prompt and of good quality.

• Maintain pest control equipment in good working condition.

Requirements

• Degree or Diploma Holders
• Must possess a Vector Control Technician (VCT)
• Must possess a Class 3 driving license.
• 2-3 years of hands-on experience in Pest Control Industry is preferred
• Able to accept 6 working days including Public Holidays and last-minute work assignments
• Fluency in written and verbal English for issuance of service report to the clients
• Proficient in Microsoft Office such as Outlook, Word, and Excel
• Good communication and interpersonal skills
• Positive work attitude, able to work independently and in a team

*We regret that only shortlisted candidates will be contacted

Position : Pest Control Technician

• 5.5 Day (Mon-Fri 9am-6pm, Sat 9am-1pm)
• Basic Salary: $1800 to $2500 + $500 Attendant allowance + High OT Payout
• Location: Gambas, Sembawang

Job Requirements:

• Relevant experience is required
• Full-time NEA Vector Control Technician License
• Able and willing to do OTs (OTs will be paid accordingly)
• Class 2B Driving Licence / Class 3 Driving Licence

Key Duties & Responsibilities:

• To carry out DETAILED INSPECTIONS and to administer appropriate pest management plans to assist with eradicating the pests and provide QUALITY SERVICES to customers’ premises.
• Able to perform pest control works at residential, commercial, industrial & food establishments.
• Most of the jobs will be conducted within the F&B premises.

Benefits:

• Commission/Incentives and excellent career prospects.
• Yearly Bonus after completion of 1 year (Base on performance).
• Medical benefits and welfare.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

1. Local motor panel control function design and prepare single line drawing with autocad sodtware.

2. Revise drawings based on instructions/ comments from customer.

3. Prepare submission for shop drawing, details drawing, as-built drawing using Autocad.

4. Maintaining the drawings reports and records.

5. Make parts explosion list (details in part list).

6. Any other ad hoc duties.

7. Good attitude with an eye for details

Job Requirement

1. ITE or Diploma in Electrical or electronic Engineering.

2. Min 1-2 years working experience with AutoCAD or equivalent

3. Can use Microsoft Office software for documentation making

4. Independent and have a sound decision making

5. Experience in Electrical wiring & diagram preferred

Interested candidates can email your resume to email address: [email protected]. We regret that only shortlisted candidates will be notified.

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Medical Devices Manufacturing Company
• Basic $2200 - $3000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working hours: 12 Hours Shift

Job Responsibilities:

• Carry out inspection of incoming materials and finished products according to operational instructions to ensure that materials or products meet the requirements
• Ensure product identification is correct and stored in the correct location, maintenance of inspection equipment and daily monitoring of production environment
• Statistics on the quality status of incoming materials and processes and the quality of shipped products
• Report abnormalities to superior in timely manner and inform relevant departments and track the improvement status of non-conformities
• Assist in customer complaint analysis and take corresponding improvement measures
• Ensure records comply with good writing practice GDP requirements
• Assist the superior to complete other tasks

Job Requirements:

• At least 1 year of quality management experience and basic computer software
• Blueprint reading capabilities, and ability to use measuring devices like gauges, meters, calipers
• Documentation and reporting skills

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24124

What will you do?

We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.

• In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes.

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)