This position is responsible for conducting audit checks to ensure that products meet the established standards, This role also supports the achievement of Company quality target.

1. Confirm to quality standard and quality processes

• Inspect in-coming and outgoing products according to policies standard.
• Perform all product processes within section (eg, QC,SAO), Reworks, Repairs, Defective photo-taking

2. Contribute to continuous improvement

• Maintain Integrity accuracy and completeness of Supplier invoice data and QC data in system
• Establish standard operating procedures and conditions for handling storage and checklist of stock.

3. Perform other ad-hoc duties as assigned.

Requirements

• At least 1 year of experience in Gold quality control in retail jewellery preferred
• If no QC experience in retail jewellery then at least 1 year of experience in QC control in manufacturing
• At least Diploma in any discipline
• Basic understanding of production methods.
• Attention to detail
• Able to use basic MS Office.
• Good Communication and Interpersonal Skills
• Able to multi-task and quick learner

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Who we are

Oishi Manufacturing Pte Ltd, established in 2003, is a prominent manufacturer and wholesale supplier of frozen desserts in Singapore. Specializing in halal-certified ice creams, gelato, and sorbets, the company serves a diverse range of clients including hotels, restaurants, cafes, fast food chains, and distributors.

Oishi operates from a 18,000 sq. ft. facility, offering both its own brands—like ArtisertZ—and customized OEM services. Their product range extends beyond frozen treats, including soft-serve pre-mixes, waffle and pancake premixes, frozen lava cakes, and equipment like soft-serve machines. The company is known for its commitment to high quality and halal compliance, holding certifications like FSSC 22000​ and BRCGS.

Oishi caters to both local and international markets, priding itself on reliable delivery services and competitive pricing. This has solidified its reputation as a preferred business partner within the food industry​

Job Description

1. Monitoring Production Processes: Ensuring that all manufacturing processes comply with established standards and regulations. This involves frequent inspection of equipment, facilities, and procedures to identify any deviations or potential issues.

Quality Testing: Conducting regular quality tests on raw materials, in-process samples, and finished products. This may involve various tests such as sensory evaluation, chemical analysis, and microbiological testing to ensure that products meet safety and quality specifications.

Documentation and Record-Keeping: Maintaining detailed records of quality tests, inspections, and any deviations observed during the production process. Documentation is essential for traceability and compliance with regulatory requirements.

Troubleshooting and Problem-Solving: Identifying the root causes of quality issues and implementing corrective actions to prevent recurrence. This may involve working closely with production teams to address process inefficiencies or equipment malfunctions.

Training and Education: Providing training to production staff on quality control procedures, food safety practices, and regulatory requirements. Ensuring that all employees understand their roles in maintaining product quality and safety.

Continuous Improvement: Participating in continuous improvement initiatives to enhance quality control processes and optimize production efficiency. This may involve implementing new technologies, adopting best practices, and staying updated on industry trends and advancements.

Compliance with Regulations: Ensuring compliance with local regulatory requirements, such as those set by the Singapore Food Agency (SFA) and other relevant authorities. This includes staying updated on changes to regulations and ensuring that manufacturing processes align with current standards.

Requirements:

1. Educational Background: A bachelor's degree or higher in food science, food technology, microbiology, chemistry, or a related field. Some positions may require specific certifications or training in food safety and quality management systems.
2. Experience: Previous experience in a quality control or assurance role within the food manufacturing industry is often preferred. This could range from entry-level positions for recent graduates to mid-level or senior roles requiring several years of relevant experience.
3. Knowledge of Food Safety Regulations: Familiarity with local and international food safety regulations and standards is essential. In Singapore, this includes regulations set by the Singapore Food Agency (SFA) as well as international standards such as ISO 22000 and Hazard Analysis and Critical Control Points (HACCP).
4. Analytical Skills: Strong analytical skills are necessary for conducting quality tests, interpreting data, and identifying trends or deviations in production processes. Proficiency in statistical analysis and data interpretation may be required for more advanced roles.
5. Attention to Detail: A keen attention to detail is crucial for conducting thorough inspections, identifying quality issues, and ensuring compliance with quality standards and specifications.
6. Communication Skills: Effective communication skills are important for collaborating with cross-functional teams, documenting quality issues, and communicating findings and recommendations to management.
7. Problem-Solving Abilities: The ability to troubleshoot quality issues, identify root causes, and implement corrective actions is essential for ensuring continuous improvement in quality control processes.
8. Teamwork and Collaboration: The ability to work effectively as part of a team is important in a production environment. Quality control personnel often collaborate closely with production, engineering, and quality assurance teams to maintain product quality and safety.
9. Adaptability: The food manufacturing industry is dynamic, and individuals in quality control roles must be adaptable to changing circumstances, such as new product introductions, process improvements, or regulatory changes.
10. Computer Skills: Proficiency in using computer software for data analysis, documentation, and reporting is typically required. This may include spreadsheet software, statistical analysis tools, and quality management software.

JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

Industry: Logistics

MNC Environment

Location: East

Responsibilities:

• Daily meeting with BU MRRT focal to validate and follow up on manufacturing NCs that is related to logistics
• Provide logistics input to identify the cause of the defects through warehouse validation with the support of QC inspectors and advise appropriate owners to address the issues through daily MRRT meeting
• Drive reported logistics issues for proper containments, disposition and correction actions
• Handle BU manufacturing NC complaints and task and perform root-cause analysis to identify the effective correction and process improvement
• Process audit lead for site focal and perform quarterly process audit and report out findings closure on a weekly, monthly, and quarterly basis
• Draft and prepare quality instructions, guidance, stand down for quality
• Site quality focal for first line quality matters in raw material warehouse that supports customer manufacturing
• Prepare reports on weekly, monthly, and quarterly basis for logistics review with customer

Requirements:

• Minimum Diploma in Logistics or other related discipline
• Experience with implementation of 8D, CAPA (Corrective and Preventive Action) programs
• Certifications an advantage including Quality Auditor, Quality Engineer, Quality Improvement Associate, Six Sigma, Internal Auditor
• Quality inspection and auditing experience
• Knowledge of tools, concepts, and methodologies of QA
• Knowledge of relevant regulatory requirements such as GDPMDS

Job ID: QXW44R5R

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

+65 6950 9747

EA Licence Number: 02C4944

Registration Number: R1100011

EA Personnel: Carlo Antonio Dela Cruz

Monday to Friday, 8am to 5pm

Location: Woodlands

Responsibilities

• Update information in SAP notifications
• Handle SAP transactions
• Coordinate on-site rework activities
• Manage notifications to suppliers
• Inspect materials
• Issue scrap notices

Requirements

• SAP knowledge
• Microsoft Outlook, Excel, and PowerPoint
• Technical drawing
• Inspection tools, e.g., vernier caliper
• Detail-oriented for data accuracy (data requires running data analytics later on)
• Physical movement of parts required
• Work in a cleanroom environment, need to wear jumpsuit

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Devon Yang Yue Teng | EA Personnel No.: R24123723

Job Responsibilities:

• Management of Quality Management Systems.
• liaise with customers & suppliers.
• Support and maintain relevant systems both internally and externally.
• Responsible for Documentation Control system and Audits.

Job Requirements:

• Good working experience.
• Precision manufacturing industry.
• Good working knowledge of checking instruments.
• Adequate understanding of Quality Management System.
• Team player with good initiative and proactive.
• Microsoft office.

Responsibilities:

• Quality inspection on airframe or aircraft engine tools
• Recording deviations in quality notifications in SAP
• Communicate closely with internal stakeholders i.e. Quality Engineer, Supply Chain, Logistics and external vendors for rework, measurement, replacement and performance relating to quality
• Move Tools as when is required based on analysis of records
• Initiate continuous improvement projects to improve work areas & procedures
• Other reasonable duties as assigned by the Management

Requirements:

• Education: Minimum NITEC in Engineering
• Experience: Minimum 2 years relevant experience in an industrial environment, ideally in the quality assurance
• Minimum 2 years relevant experience in metrology and basic knowledge in measuring tools and practices
• Excellent communication & interpersonal skills
• Good mechanical understanding
• Basic knowledge in visual inspection of weld seams

1. The scope of Services for the One (1) Onshore Quality Assurance/ Tester shall be as follows:

a) Understand and document business processes, workflow and user story;

b) Perform checks under both functional and non-functional scopes of testing;

c) Review, develop and align test plan, test cases, scenarios and strategies, ensure adherence to quality standards;

d) Perform manual and automated testing using Tricentis TOSCA, including preparing test data when necessary;

e) Develop and maintain automated test scripts;

f) Review, support and participate in functionality and technical testing such as performance testing, security, interface integration and usability testing;

g) Review test reports and results of the Authority’s appointed contractors for the Authority’s systems;

h) Collaborate and coordinate with system stakeholders and Authority’s appointed contractors for testing;

i) Review test process and recommend improvement, which includes analysing test processes and methodologies, identify area for improvement and recommend process optimisations and best practices; and

j) Manage test activities and ensure the planned test activities are completed as scheduled.

2. The One (1) Onshore Quality Assurance/ Tester proposed by the Contractor shall have at least 3 years of experience as a Quality Assurance/ Tester or equivalent position and the following skill sets:

a) Bachelor’s degree in computer science, Computer or Electronics Engineering, Information Technology or related disciplines would be preferred;

b) Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage;

c) Strong analytical skills, meticulous attention to details, good interpersonal skills such as tactfulness, good presentation and listening skills;

d) Experience in the following would be advantageous:

i. Automated testing tools such as Tricentis TOSCA; and

ii. Testing for government public services.

e) Good written and verbal communication and presentation skills, able to interact professionally with all levels of the organisation.

Our client is a US MNC and a Fortune 500 Company that provides Design and Manufacturing solutions to the customers worldwide. They are currently hiring for a Quality Director and will like to invite interested candidate to submit your detailed resume to [email protected]

Quality Director

Responsibilities:

• You will be part of the site Management Team
• Manage entire site Quality system which includes Medical system
• Responsible for all product quality issues, including managing internal and external communication on product qualities.
• Identifies on-going quality issues and makes recommendations to improve current processes
• Interfaces with customers, suppliers, engineering and operational groups on quality related issues
• Responsible to lead 5S & 6 sigma initiatives for the Region
• Provides training in statistical concepts and techniques
• Establish, review & approve quality control methods and procedures
• Plays a key role to provide guidance to site with respect to maintaining quality excellence

Requirements:

• Degree in Mechanical or Electronic / Electrical Engineering or Quality Management with minimum 10 years relevant experience in Quality &/or Management capacity preferably in EMS environment & prior experience in handling FDA audit is preferred
• Excellent knowledge & implementation experience in Six Sigma
• Formal training in ISO Lead Auditor is a definite advantage
• Familiar with ISO-13485 & TL (Telecommunication ) system
• Strong skills in facilitation, analysis & problem solving
• Experience in analyzing of various processes barriers and using TPM methodology to drive improvements and inspection to support operations
• Candidates with Black Belt or Master Black Belt in Lean / Six Sigma will have added advantage
• Ability to work independently with excellent interpersonal relations and deep passion for driving product quality are essential

Whether you’re at the start of your career or looking to discover your next adventure, your story begins here. At Citi, you’ll have the opportunity to expand your skills and make a difference at one of the world’s most global banks. We’re fully committed to supporting your growth and development from the start with
extensive on-the-job training and exposure to senior leaders, as well as more traditional learning. You’ll also have the chance to give back and make a positive impact where we live and work through volunteerism.

Shape your Career with Citi
Citibank serves as a trusted advisor to our retail, mortgage, small business and wealth management clients at every stage of their financial journey. Through Citi's Access Account, Basic Banking, Citi Priority, Citigold and Citigold Private Client, we offer an array of products, services, and digital capabilities to clients
across the full spectrum of consumer banking needs worldwide.

We’re currently looking for a high caliber professional to join our team as Assistant Vice President, Business Risk and Control Manager based in Singapore. Being part of our team means that we’ll provide you with the resources to meet your unique needs, empower you to make healthy decision and manage your financial well-being to help plan for your future. The Citi Wealth business delivers a comprehensive wealth solution to clients across the wealth continuum, with integrated advice and execution, as well as traditional and alternative investments, managed account strategies, world-class research and investment guidance. Our Wealth business serves ultra-high-net-worth
individuals and family offices through Citi Private Bank, operates in the affluent and high-net-worth customer relationship tiers of Citigold® and Citigold Private Client and offers wealth management in the workplace through Citi Global Wealth at Work.

The Business Risk and Controls Manager is part of Global Wealth Control team focusing design and execution of control framework for MCA Testing for Investment and Insurance business for Wealth business. This position reports to the Wealth Client Segments Control Testing Head within the Citi COO
organization’s Central Controls Capabilities; and is a strategic- and execution-oriented leadership role accountable for end-to-end control testing for this position’s specified business/segment – i.e., operational controls performance assurance/testing – which includes design, results reporting, and insight sharing related to the above scope of controls testing. Developed communication and diplomacy skills are required to guide, influence and convince others, in particular colleagues in other areas and occasional external customers. Accountable for controls testing results and advice regarding the controls execution. Excellent management and communication skills required to negotiate internally, often at a senior level. Developed communication and diplomacy skills are required to guide, influence and convince others, in particular colleagues in other areas and occasional external customers. Accountable for controls testing results and advice regarding the controls execution. Necessitates a degree of responsibility over technical strategy. Responsible for supporting their manager in handling staff management issues, including resource management and allocation of work within the team/project.

Responsibilities:
• Coordinate and contribute to governance and the facilitation of the execution of the Manager Control Assessment (MCA) as required by the MCA Standard including the assessment and appropriate approval of risk associated with business changes. Individual will be part of Centralized MCA Testing and Monitoring Utility team within Wealth organization and will be focused on performing monitoring and Testing for Investment
Solution MCA across Private Bank, Trading Desks and CG/CPC Investment Solution.
• Supports the Controls Testing Utility by acting on assessing control design, designing control testing tools, developing control testing procedures, ensure control testing
transitions, dispositioning exceptions, and developing insights.
• Carries key responsibility for Control Design Assessment (CDA) by resolving escalations, defining the work plan, and designing the quality review process.
• Play a key role in engaging with Investment Risk Assessment and Control design team and Investment Solution Business Execution team in assessing, designing control mapping in respective ARCMs within relevant AUs.
• Contribute to the quality, completeness, and accuracy of the implementation of the Control Framework, including Risk Control Policy, Control Standard, Issue Management Policy, Lesson Learned Policy and Control Inventory.
• Appropriately assess risk when business decisions are made, demonstrating particular consideration for the firm's reputation and safeguarding Citigroup, its clients and assets, by driving compliance with applicable laws, rules and regulations, adhering to Policy, applying sound ethical judgment regarding personal behavior, conduct and business practices, and escalating, managing and reporting control issues with transparency, as well as effectively supervise the activity of others and create accountability with those who fail to maintain these standards.
• Partner with the team for the identification of issue root cause, partnering with control and process owners to recommendations holistic corrective actions and improvements, for issues identified as part of MCA Testing and Monitoring.
• Helps driving continuous improvements in accuracy, efficiency, timeliness, and quality of MCA control design assessment and controls testing.
• Support with the timeliness, accuracy and completeness of the MCA through controls prior to the execution of a process.
• Influence decisions to ensure adherence to the MCA Standard through controls after the execution of a process (QA).
• Coordinate and contribute to Operational and Compliance Risk in accordance with established Policy requirements.
• Support Risk Appetite and monitor / assess exposures against this in accordance with
enterprise requirements (if applicable).

• 5-8 years of experience.
• Must have exposure to 2-3 years of Risk, Control, Audit, Testing roles
Outstanding leadership, communication, and influencing skills as this leader will work with Sr
leaders, and audit partners on a regular basis. Relevant experience in financial services,
with enhanced knowledge of the Branded Cards business preferred.
• Project management and governance experience with demonstrated ability to achieve and exceed critical milestones.
• Must have ability to foster working relationships with other leaders across multiple lines of business and with support organizations including auditors and regulators.
• Demonstrated judgement and critical thinking skills.
• Bachelor's/University degree or equivalent experience.

Working Location:Tai Seng
Working Hours: 8am - 6pm
Working Days:5days
Salary Range:$7,000 – $8,500

The Manager (Inventory) responsible in managing the inventory control to ensure inventory level is optimized and inventory targets are achieved.

KEY ROLE(S), RESPONSIBILITIES AND DUTIES

• Oversee inventory management; maximize stock turn through replenishment and stock transfer, as well as ensure inventory levels of product categories are controlled within the stock turn day given.
• Locate and reconcile any inventory discrepancies.
• Responsible to ensure overall cost effective and efficient methods of stock movement.
• Execute overall management direction to ensure product orders are sufficient and on time to cater for business activities.
• Constantly review and improve inventory control protocols and processes to ensure proper system is in place to support the work and to ensure adherence to supply chain inventory standards.
• Perform any other duties as assigned by Superior.
  
  QUALIFICATIONS, SKILLS, KNOWLEDGE AND ABILITIES
  EDUCATION AND EXPERIENCE
• Bachelor’s degree or equivalent.
• Proven track record with at least 8 years’ experience in retail supply chain management.
• At least 3 years of management experience in retail chain stores.
• Experience in WMS ERP system.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

As a Senior Industry 4.0 (I4.0) Analyst at Micron Technology, Inc., you will report to the Smart Manufacturing and Artificial Intelligence organization. The team defines, drives and delivers end to end smart manufacturing solution, integrated across functions of the business. The team will investigate applying industry-leading the best methodologies in automation, AI and machine learning to enhance Micron’s product development, business, and administrative processes across the company.

Responsibilities and Tasks

• Lead the analysist for complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences.
• Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge.
• Creates specifications for reports and analysis based on business needs and required or available data elements.
• May provide consultation to users and lead cross-functional teams to address business issues.
• May directly produce datasets and reports for analysis using system reporting tools
• Understands business problem and translates user requirements into technical language and vice versa for data science / technical solution / IT teams.
• I4.0 Analyst with strong domain knowledge is preferred and will bridge the gap between users and developer team
• Accountable to ensure modules / functionalities address current metrics gaps and new business opportunity
• Translating project expected project metrics gain into dollar values, partnering with Finance
• Defining priority for projects for strategic pillar roadmap provided by Strategy Pillar Leader
• Conduct diagnostic and understand gaps and areas of improvement in current IIoT solutions and ways of working
• Work with PDE, Data Scientist, System Architect and IIoT end users to design & define requirements and analyze information, production interdiction that related to the adoption of IIoT for Smart Manufacturing
• Ensure optimization and standardization of tools and processes leveraging central team business partners to allow I4.0 solutions to be scaled sustainably across Micron Backend sites
• Develop business case, including impact validation approach, ROI of potential solutions and prioritize & propose projects for implementation
• Lead projects and activities that will require the coordination, support, and management of resources from global teams
• Provide expert functional and process guidance on system interfaces and capabilities

Qualifications

• Master/Bachelor's Degree in Electrical Engineering, Specialized in Data Analytic.
• At least 5-7 years of work experience in Assembly & Test and Post Wafer Fab (PwF) Process & Equipment Engineering or similar operations functions, good knowledge in High Bandwidth Memory (HBM) production is preferred
  
• Familiar with Composite Metro solution development, systems and solutions for high volume and high mix production environment
• Good interpersonal skills with demonstrable ability to effectively lead and present to small and large groups
• Proven ability to work multi-functionally with peers, senior and mid-level management
• Peer leadership and relationship management skills
• Strong analytical and problem-solving skills
• Highly organized and ability to remain flexible to the changing business needs

About Micron
As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and High Bandwidth Memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Analyzes complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences. Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge. Creates specifications for reports and analysis based on business needs and required or available data elements. May provide consultation to users and lead cross-functional teams to address business issues. May directly produce datasets and reports for analysis using system reporting tools.

Degree / Diplom in Science, Electrical / Instrumentation / Process Control System

Prepare the ITP, QA / QC Check List, Quality plan and submit the documents to Client as per Pharma / Wafer Plant requirement

Monitor the Quality and provide the training for workers if quality lack before Client Inspection

Project Management and Quality Inspection with Client, Main contractor and Sub Contractor

Quality trainning including practical to the own team and Sub contractors.

Coordinate with Consultants, Clients, Sub Main contractor Manager / Engineer for update the site installation, Red Marking Drawings for approval, BOQ for Construction Works Execute

Must Experience in the usage of Bim MEP (Revit / Navis / NWD Software and 3D ) model to submit the drawing to clients

Prepare the materials BOQ to procurement team

Observation of the Safety violation and Correcting the unsafe works

Prepare the RA, SWP and MOS as per client required

Get to Know the Role

We are seeking a Senior Manager of Application Engineering & QA to lead a team in providing innovative technical solutions while ensuring quality standards. This role involves overseeing continuous improvement projects, mentoring team members, and collaborating with customers on their technical needs. Additionally, the candidate will handle customer inquiries and manage audits. Knowledge of quality assurance practices and strong leadership and communication skills are essential.

Essential Responsibilities

· Lead a team of Application Engineers to meet company objectives and KPIs while planning and managing Continuous Improvement Projects (CIP) focused on quality, safety, and budget adherence.

· Supervise the design and implementation of technical solutions to meet customer needs.

· Coordinate with product development, sales, and support teams for seamless integration.

· Execute and monitor Application Engineering projects to ensure timely and budget-compliant delivery while staying informed on industry trends and technologies to provide innovative solutions.

· Collaborate with different stakeholders and Japanese counterparts to resolve customer feedback.

· Oversee the development of technical documentation and train users on best practices.

· Ensure compliance with quality assurance practices and industry standards.

· Manage customer audits to uphold quality protocols and address any findings.

· Provide coaching and development opportunities to enhance team performance.

Skills and Competencies Profile

· A Master’s or Bachelor’s degree in Engineering.

· 6 to 8 years of relevant experience, including 2 to 4 years in a managerial role.

· In-depth knowledge of thin-film metallurgy, deposition processes, and related equipment (e.g., Ion Beam Deposition, PVD, CVD).

· Proficient in problem-solving, with the ability to address customer issues through critical and logical thinking

· Familiarity with quality assurance practices, including compliance with industry standards and quality management systems.

· Experience in conducting audits and implementing corrective actions to ensure adherence to quality protocols.

· Proficiency in statistical data analysis tools such as JMP, Minitab, Design of Experiments (DOE), and Statistical Process Control (SPC).

· Strong leadership, coaching, and communication skills.

· Ability to thrive in a dynamic, fast-paced environment while managing multiple priorities.

HOYA Electronics Singapore Pte Ltd is an equal opportunity employer. We are committed to building diverse teams and creating a safe and inclusive workplace that enables our people to perform at their best, regardless of nationality, ethnicity, religion, age, gender identity or sexual orientation, and other attributes that make every individual unique.

An offer with HOYA Electronics Singapore is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations.

HOYA Electronics Singapore does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with HOYA Electronics Singapore.

Responsibilities:

• Lead and manage day-to-day performance of Local and Overseas Customer Service teams
• Handle and resolve client complaints / inquiry / feedback
• Improve customer service experience, create engaged customers and facilitate organic growth
• Develop customer service procedures, policies and standards
• Keep accurate records and document customer service actions and discussions
• Generate reports by analysing the customer service experience, if requested
• Provide training to customer service staffs to deliver a high standard of customer service

Requirement

• Bachelor’s degree in any related discipline
• Min 8 years of Customer Service Support experience with at least 4 years in leading team size of up to 30 agents
• Having experience in IT, financial services or payment solution industry is an added advantage
• Proficient in Microsoft Office applications
• Customer service orientation, stress tolerance, problem analysis and problem-solving
• Effective interpersonal skills with both internal and external customers
• Advanced troubleshooting and multi-tasking skills

Interested candidate please submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile - https://sg.go.persolkelly.com/job/details/10361

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E • EA License No. 01C4394

• Registration ID <R1105286> (Ngiam Xinyi)

Global Facilities Quality Senior Program Manager

Description

As a Global Facilities Quality Senior Program Manager, you will work closely with all the major functional organizations within Global Facilities, & with the world-wide site Facilities, Global Quality and other major corporate organizations to drive Quality systems projects/programs from initiation to completion. These projects/programs are critical to the success of Facilities and the overall network.

Your responsibilities will include, but are not limited to, the following:

• Collaborate with Global & Site Facilities team to proactively manage projects/programs, such as Management of Change (MOC), Failure Mode and Effect Analysis (FMEA), Calibration, Effective Problem Solving (EPS), Global Deviation Management System (GDMS), Risk-Based Thinking (RBT) Risk & Opportunity (R&O) depository, etc. to enhance “Manage Facilities” Quality Management System (QMS) Business Process (BP).
• Creating, leading, driving & maintaining Projects/Programs, including project definition, work breakdown structures, schedules, communication plans, scope documents, and stakeholder analysis; organizing and coordinating project meetings; developing meeting presentations, agendas, minutes, tracking and following up on action items and early identification and resolution of project risks, establishing of metrics, training, software and measuring and monitoring of program status.
• Supporting the Global Facilities Quality Core Team meetings to drive alignment and continuous improvement to support Manage Facilities QMS BP. This includes:Creating and monitoring metrics to measure, monitor and drive continuous improvement of the BP.
  Maintenance of Central Governance repository platform to support Manage Facilities QMS process and all Quality roadmap
  Implementation of critical new business processes that support continuous manufacturing improvement
  Participating and leading Business Process improvement projects on Reliability and Cost projects/programs which contributes directly to Effectiveness & Efficiency KPIs. This includes the implementation of project management within Facilities organization.
  Managing external audits including setup, coordination and successful follow up with the Global Facilities organization. This includes the identification and implementation of QMS processes and tools to enable continued success with customers.
  Enhancing and driving a proactive process based on internal audit program and tracking and supporting any NC follow up through close out. And incorporating lessons learned to continually improve the QMO business processes.
  Managing the communications and access to information from the QMS program and projects through various tools and approaches such as SharePoint web pages, reports and other means
  
• Supporting Global Fac Work-Force Development (WFD) to establish and maintain Global Fac training plans, training assignment, Training Needs Analysis (TNA), establishing to Learning Items, quizzes, and tracking of assigned training status across Global Fac network. Supporting Global Fac Documentation to maintain Global Fac Controlled Document Library, including enforcing documentation control, publishing of ECNs notifications, & conducting Periodic Document Review (PDR).

Qualifications

The successful candidate for this position will have:

• Excellent skills for leading or facilitating multi-organizational teams to success on complex multidimensional projects/programs
• Excellent communication skills to build teams comprised of key skills, to drive progress to plan and to get management support and buy-in for complex projects/programs
• Ability to develop and maintain positive, cooperative, team-oriented relationships with peers, coworkers, management, customers, and auditors
• 2 or more years of Facilities Semiconductor industry engineering experience
• Skills in the creation and management of projects/programs (TABLEAU reports, Sharepoint Online (SPMO), etc)
• Working knowledge and drive quality programs such as MOC, FMEA, Calibration, GDMS, Error-Proofing, etc

Senior Quality Management Systems EngineerEducation

• Bachelor’s degree in engineering or equivalent
• Project/Program management experiences are preferable
• ISO or IATF Audit experience including training and certification are preferable

Workplace

• Travel Required : Yes – Domestic and International travel as required by business needs
• Environment : Office
• Shift : Normal shift (8+ hour)
• GJS : E2 to E3, or P2 to P3

Leads people who are responsible for internal business projects and programs involving department or cross-functional teams of subject matter experts, delivering products through the design process to completion. Plans and directs schedules as well as project budgets. Monitors the project from inception through delivery. May engage and oversee the work of external vendors. Assigns, directs and monitors system analysis and program staff. These positions' primary focus is project/program management, rather than the application of expertise in a specialized functional field of knowledge although they may have technical team members.