Key Responsibilities/Duties

• Engage project team and sub-contractors to deliver high quality works and ensure all temp works and permanent works done are in full compliance with LTA M&W Sep and PS clauses.
• Effectively implement GBSB's Project Quality Plan on site.
• Conduct internal Quality Audits, arrange site quality inspection and materials inspections with QPS.
• Liaise with authorities to achieve acceptance in materials submission, site quality inspections, documentation and compliances.
• Provide training to site staff on the deep understanding of quality standards, hold points and specifications for the site activities in advance.

Requirements:

• Degree in Civil Engineering or equivalent
• Minimum 5 years of relevant engineering experience for LTA MRT projects

Position Summary

This position is involved in Supplier Quality activities that improve, monitor and measure Illumina’s compliance with the Quality System Regulations, Illumina Quality policies, FDA regulations and ISO standards as well as Illumina product quality for current operation and compliance objectives.

Responsibilities:

• Support qualification of new Suppliers and Partners for materials and services including risk assessments, audits and other supplier on-boarding activities
• Provide support to investigation teams in determining root causes on material quality issues and initiate/ensure corrective and preventive action plans are developed and executed
• Interface with Suppliers/CM (Contract Manufacturer), Engineering / Manufacturing / Quality Assurance / Procurement departments to drive for quality improvements, specifically on incoming rejects, workmanship defects and primitive failures
• Participate in Quality review activities with supplier/CM to identify improvement opportunities to meet quality expectation
• Compile, evaluate and report on supplier/CM quality performance metrics for scorecard and monitoring
• Monitor to ensure supplier’s preventive and corrective actions are implemented and effective
• Participate with NPI team in selection of new suppliers

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Bachelor’s Degree in Engineering, Life Sciences, or related field with 1-3 years of relevant experience
• Experience in driving suppliers to improve quality performance
• Experience in conducting supplier audits
• Good understanding of FDA regulatory environment (CFR 820), 501k and ISO 13485 strongly preferred.
• Experience in medical device / pharmaceutical / IVD is preferred
• Developing basic knowledge of quality tools
• Beginner to intermediate experience with Microsoft tools and spreadsheets, charting, graphing tools and presentation tools.
• Experience with electronic production life (PLM), enterprise resource planning tools (SAP) and etc are preferred
• Experience with statistical analysis packages, eg, JMP, Minitab are preferred
• Detailed oriented, well organized and able to work independently and in teams.
• Good communication and collaboration skills
• Ability to travel as needed

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

The Client is a global aerospace company.

Responsibilities:

• Ensure product and process quality by maintaining the quality management system and complying with relevant regulations and customer requirements.
• Update and improve quality procedures and control instructions.
• Address non-conformance issues with customers, vendors, and suppliers, conduct root cause analysis, and implement corrective actions to minimize quality-related costs.
• Conduct internal audits to assess the quality system, products, and processes (ISO9001 / AS9100 / NADCAP).
• Perform audits of vendors and on-site as needed.
• Adhere to customer and regulatory standards.
• Work to reduce monthly costs associated with poor quality and scrap.

Requirements:

• Degree in Mechanical or Aeronautical Engineering or a related field.
• At least 2 years of experience with ISO9001 / AS9100 Quality Management System and NADCAP.
• Proficiency in problem-solving tools such as fishbone diagrams, FMEA, and the 5-whys methodology.
• Ability to read and interpret technical drawings.
• Strong analytical and communication skills.
• Ability to multitask and attention to detail.
• Familiarity with NADCAP processes like heat treatment, non-conventional machining, shot peening, and chemical processing is a plus.

· Responsible for developing, implementing, and maintaining Quality Plan for FA and production parts.

· Responsible for maintaining company measuring instruments.

· Interpret and analyse customer specifications with great details

· Identify, document, and report defects or anomalies, working closely with cross-functional teams to address and resolve issues promptly.

· Facilitate meetings for production and quality personnels

· Support in internal and external audits.

· Maintaining Company’s Quality Management System (QMS)

· Any other duties as assigned by Supervisor.

Job Requirements:

· Technical certificates in any Engineering field

· Effective communication skills, both written and verbal, to liaise with customers and suppliers

· Ability to work with production and office staffs

· Ability to write root cause analysis

· Flexibility and adaptability to take on new challenges and responsibilities.

· Ability to read and interpret mechanical drawings

We are seeking a highly skilled and experienced Software Quality Assurance (QA) Lead to oversee the testing and quality assurance efforts for our web application projects. The ideal candidate will ensure the delivery of high-quality software by implementing robust testing strategies, managing a team of QA engineers, and collaborating with cross-functional teams to meet project goals and timelines.

Role & Responsibilities:

• Develop and implement QA strategies, test plans, and scripts for web and mobile applications.
• Lead and mentor a QA team, fostering collaboration with development and other stakeholders.
• Oversee all phases of testing, including functional, regression, performance, and security testing.
• Manage manual and automated testing efforts across multiple platforms (PC/Android/iOS).
• Identify and resolve software defects, collaborating with development teams to improve processes.
• Drive the adoption of automation testing frameworks and tools, optimizing test environments.
• Ensure compliance with security, accessibility, and regulatory standards.
• Promote a quality-focused culture throughout the development lifecycle.

Ideal candidate:

• 5+ years in software quality assurance, including 2+ years in a lead role.
• Strong understanding of web application architecture, testing methodologies, and SDLC.
• Experience with QA tools (e.g., Selenium, JIRA, Postman) and automation tools (e.g., Katalon, pCloudy).
• Familiarity with CI/CD pipelines, Agile/Scrum, and DevOps practices.
• Knowledge of performance testing tools (e.g., JMeter, LoadRunner) and scripting languages (e.g., Python, JavaScript).
• Hands-on experience with mobile and Svelte-based app testing frameworks.
• Strong leadership, problem-solving, and communication skills.
• Familiarity with Linux, Windows, Amazon Cloud, and EKS.

Note: This role requires frequent travel and will be based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Key Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to address and resolve abnormal quality issues within the manufacturing process.
• Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Drive efforts to improve internal quality control procedures and enhance process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead initiatives to resolve customer-reported quality issues, ensuring timely and effective resolutions.
• Prepare detailed reports for stakeholders outlining corrective actions and preventive measures.
• Develop and implement strategies to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to enhance inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a unified approach toward achieving quality objectives.
• Manage personnel-related tasks, including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Oversee the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor’s degree in a relevant field; advanced degree preferred.
• A minimum of 6-8 years of proven experience in quality management, particularly within manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience collaborating with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.
• Willingness to travel frequently and be based in China and Vietnam for at least 10 months per year (separate living accommodations provided). The role includes annual 4 round-trip tickets back to Singapore.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Overview

The Job Holder will support in building improvement capabilities and culture in the NUHS Regional Health System Office (RHSO), including community partners such as GPs. The Job Holder will be involved in co-developing and conducting quality improvement training for RHSO staff and community partners, as well as facilitate and coach small to large scale improvement projects through the use of appropriate tools/methodologies.

Job Responsibilities

1. Deliver QI Training

• Develop training materials and resources (e.g. training guides and e-learning videos) on quality improvement
• Conduct and facilitate quality improvement training sessions/workshops for RHSO staff and partners
• Gather feedback on training sessions and use of appropriate improvement methodologies/tools
• Deliver training on lean management and human-centred tools to impart knowledge and skills to hospital staff.

1. Facilitation of improvement projects

• Facilitate and coach department/division and organisation-wide level improvement projects to improving quality and processes through the use of appropriate tools/methodologies
• Monitor the progress of improvement activities and guide teams to take appropriate actions
• Assist in interpreting data to measure the effectiveness of the improvement activities

1. Strategy & Culture Building

• Assist in development and implementation of Improvement framework and strategies
• Support initiatives or events that promote improvement and Innovation culture in RHSO
• Lead engagement with HODs to influence and identify areas of improvement in quality and safety

1. Any other tasks as assigned

Requirements

Qualification Required and Area of Discipline

Good degree in any discipline, preferably in Life Sciences, Business Administration, Industrial Design

Prior healthcare sector experience is preferred

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Proficient in quality improvement methodologies such as Lean, process/value-stream mapping, design thinking
• At least 1-2 years of experience in facilitating workshops and conducting trainings
• Confident in coaching and guiding fellow colleagues in Quality Improvement tools
• Certified Six Sigma Green/Black Belt will be an added advantage
• Able to engage stakeholders and work through doctors, nurses, allied health professionals, operations and administrative staff
• Able to work independently and as a team
• Ability to perform even under tight timelines
• Good analytical and organization skills
• Good writing and verbal communication skills
• Open to learning and trying new things. Able to grasp concepts easily and be able to think on the feet.
• Highly self-driven and self-motivated, positive attitude and perseverance to overcome obstacles

Job Description:

• Monitor and verify that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Monitor and verify that environmental impacts are kept to a minimum during the planning and design and construction phases of the project.
• Conduct surveillance, monthly inspections and detailed audits.
• Compile and complete checklists in order to aid the surveillance and inspection requirements.
• Keep records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Recommend the issuing of penalties to the Engineers Representative for contravention of the EMP.
• Prepare and submit a Site Environmental Control Programme and Site Environmental Control Reports to the Occupier of the construction site.
• Identify environmental issues and recommend measures to rectify the irregularities.
• Prepare and submit a Site Environmental Control Report to the Occupier of the construction site.
• Assist the authorities to investigate environmental issues.
• Organise campaigns, training courses and other activities to develop and sustain the interest of workers in maintaining good environmental health standards.
• Any other duties /responsibilities as assigned by the Reporting Manager.

Job Requirement:

• Registered with National Environment Agency (NEA).
• Good knowledge of ECO Scheme and Environmental Laws.
• At least 5 years relevant working experience in construction industry; particularly civil works or in LTA project, or similar scale, complexity and nature of work will be advantages.
• Familiar with Occupational Health & Safety Management System.
• Good team player and able to work independently with positive attitude.
• Working Location- Tampines Area.
• 6 Days work week.

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

About your role

• Design, maintain, and scale testing frameworks, ensuring comprehensive coverage and reliability.
• Integrate with CI/CD pipeline to ensure tests are executed as part of the development lifecycle.
• Utilize testing tools to develop and execute automated and unit tests.
• Manage bug tracking and test case management using Jira, with Zephyr to streamline test planning and execution within the Unity development workflow.
• Develop detailed automated and unit test plans and test cases, and maintain them.
• Optimize automated and unit testing strategies and tools to meet the unique needs of software development.
• Analyze test results,document systematically, and collaborate with the development team for issue resolution.
• Stay informed on the latest testing technologies, and best practices to continuously improve the testing process.

Requirements

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• At least 2 years of experience in QA process.
• Experienced with CI/CD practices.
• Skilled in using Jira for issue tracking, with proficiency in Zephyr for managing test cycles.
• Strong communication abilities and a detail-oriented mindset as a collaborative team member.

• Well Established Medical Devices Manufacturing Company
• Basic $2300 - $3000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working hours: 12 Hours Shift

Job Responsibilities:

• Carry out inspection of incoming materials and finished products according to operational instructions to ensure that materials or products meet the requirements
• Ensure product identification is correct and stored in the correct location, maintenance of inspection equipment and daily monitoring of production environment
• Statistics on the quality status of incoming materials and processes and the quality of shipped products
• Report abnormalities to superior in timely manner and inform relevant departments and track the improvement status of non-conformities
• Assist in customer complaint analysis and take corresponding improvement measures
• Ensure records comply with good writing practice GDP requirements
• Assist the superior to complete other tasks

Job Requirements:

• At least 1 year of quality management experience and basic computer software
• Blueprint reading capabilities, and ability to use measuring devices like gauges, meters, calipers
• Documentation and reporting skills

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Supporting Electrical and Automation at Tuas plant.

Responsibilities:

· Responsible for safety personnel and plant.

· Participate directly in site emergency response team.

· Troubleshoot and repair a variety of complex liquid, drying and powder processing, and packaging equipment.

· Back up and maintain PLC, HMI, VSD and other controller program and software version.

· Troubleshoot automation issue by hardware or instrument, program setting/bug and connection issue.

· Knowledge in Alen Bradley PLC, Wonderware SCADA and In Batch system for Troubleshoot automation related in Dry Blending, Filling and Packaging system.

· Evaluation of P&IDs, functional design specification.

· Responsible for performing PM’s and work orders as well as project work.

· Disassembly, diagnosis, repairs and re-assembly of machinery to hygienic and sanitary standards.

· Participate in the development of a Predictive Maintenance program at Tuas.

· Complete all necessary reports and documentation via hardcopy and computer.

· Communicate with Engineering technician on any major process issues as and when required.

· Maintain a clean and sanitary environment in accordance to all safety and GMP policies.

· Be able to use independent judgment and work well within a team concept.

· Interact with internal and external customers in a professional manner.

· Follow all cGMP requirements to ensure proper manufacturing environment.

· Actively participate in the resolution and elimination of downtime issues.

· Assist in the creation of SOP’s, checklist, and work instructions.

· Complete all necessary transactions, reports and documentation with accuracy and timeliness.

· Maintain a clean and sanitary environment to 5S or similar standard.

· Adhere to the Tuas Code of Conduct.

· Provide technical assistance and support regarding all projects, installations, and repairs.

· Maintain smooth communication with different levels of departments and peers.

· Upgrade hardware and software for improved process control.

Requirements:

· Nitec/Higher Nitec/Diploma in Electrical & Electronics / Mechatronics equivalent qualifications.

· At least 3 years of industrial automation & maintenance experience.

· Previous experience in a food or pharma manufacturing environment is preferred with experience and knowledge in Automation and predictive and preventative maintenance technologies.

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

• To assist to liaise and co-ordinate with LTA, authorities, Consultants and stakeholders.
• To ensure risk assessment and safe working procedure are properly executed on site.
• To conduct daily health, safety and environmental inspections, prepare reports and follow up with Project Safety Team.
• Ensure compliance with environmental regulations, develop environmental control plan & liaise with NEA (such as report submission, etc.).
• Proper documentation of all EHS records, certificates, notice and official related EHS correspondence.

Requirement:

• At least 5 years relevant experience in construction for LTA projects.
• NEA registered ECO.
• Able to work independently with minimal supervision.
• Able to ensure compliance with the latest environmental regulations.

Job Responsibilities:

• Inspect and identify all possible forms of hazards in a work environment.
• Inspect work areas regularly to ensure compliance with workplace safety and health requirements.
• Check equipment to ensure it is in working condition and do not pose any environment health hazard to user or the workplace.
• Provide solutions to address any unsafe practices or act at workplace.
• Conduct risk assessments on work site.
• Prepare reports on workplace safety assessments.
• Take charge of all matters related to environmental health such as:

1. Disease-bearing insects and rodents

2. Proper disposal of construction waste

3. Noise, air and dust pollution

4. Earth littering

5. Siltation of drains

6. Food hygiene in workers canteens if any

7. Any other environmental health matters

• Report these conditions/ situations with recommendations on remedial measures to be taken to prevent recurrence

Requirement

• Diploma in any field.
• Registered Environmental Control Officer with NEA.
• At least 2 years of working experience.
• Preferably personnel specialized in Building Construction - Environmental/Health/Safety or equivalent.
• Candidate who possess high experience will be considered for senior role.

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job description

Our Office Location : 2 Seraya Place, Jurong Island, Spore 627857

1 Responsibilities

• Establish, develop, update and maintain the QEMS system and work with respective stakeholders to develop and revise procedures (ISO 9001:2015).
• Monitor & analyze trends and quality performance.
• Manage the certification and audit of the Company ISO (ISO 9001:2015 internal and external audits) to ensure all ISO 9001 and relevant certifications’ objectives and requirements are met.
• Manage and ensure internal and external audit comply to QEMS requirement. This includes maintaining accurate records and coordination of initiatives improving QEMS.
• Effectively communicate the QA strategies, processes, and needs across organization through quality programs and campaigns.
• Participate in customer audit, lead investigations of quality issue with customers and internal stakeholders and follow up the CAPA action items to resolve all customer feedbacks / complaints.
• Inculcate and promote a culture to deliver high standard of quality in services rendered to customers.
• Responsible for managing Supplier / Vendor management on-boarding, improvements based on non-conformities, supplier audits and KPI’s.
• Support internal stakeholders on Management of Change.
• Liaise, fulfill, monitor and update customer on their KPI and other requirements.
• Responsible for monthly quality management review meeting and other quality performance reports where required by Management.
• Inspect Warehouse, Drumming including Transport & Yard areas and processes to ensure compliance with quality standards.
• Conduct training on ISO 9001 requirements, quality awareness and quality related issues.
• Contribute to any other projects assigned by the Line Manager.

2 Requirements

• Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• ISO 9001:2015 lead or internal auditor certificate from accredited institution would be an advantage
• Minimum 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.
• Demonstrate strong leadership skills with at least 3-5 years’ experience in leading a quality team.
• Experienced in improving, maintaining and drives implementation and compliance of ISO 9001 management system would be an advantage.
• Experienced in customer / supplier quality management would be an advantage.
• Positive can-do attitude and self-initiated with strong sense of job ownership.
• Innovative problem-solver and believes in continuous improvement.

Job Description:

• Responsible for product quality assurance.
• Completes all administrative activities associated with quality inspection.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Downloads quality information from quality system to be used for Quality reports.
• Plans and directs activities concerned with the establishment and/or continuance of process related requirements and other quality programs.
• Prepares quality documentation or equivalent.
• Prepares Statistical Process Control Charts where required.
• Responsible for authorizing the released of final products to customer.
• Supervises inspectors or technicians on the inspection plan.
• Directs inspectors or technicians engaged in measuring, inspecting and/or testing products or parts and tabulating data.
• concerning materials, product or process quality and reliability.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering
• to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets
• through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Job Requirements :

• Diploma / ITC / NTC in Mechatronics/ Electrical & Electronics engineering or related discipline, preferably with 2 years in manufacturing environment.
• Proficiency in written and communication skills in English.
• Practical computer skills and knowledge with hands-on ability.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Able to use microscope for inspection and verification.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

The Supplier Quality Engineer will be based in Changi South.

Job Responsibilities

• Attend day to day part quality issues / MRB reviews.
• Serve as the primary point of contact for all supplier-related quality issues.
• Cross-Functional Collaboration: Collaborating with internal teams, such as Engineering, Procurement / Buyer, Planner, Operation, Logistic to address any supplier-related quality issues.
• Collaborating with suppliers to identify root causes of quality issues and implementing effective corrective and preventive actions. Review CAPA effectiveness, ensure no repeating occurrence.
• Work with IQC team in reviewing incoming parts from suppliers with no defects and ensure quality.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders as well as customers.
• Seek for Continuous Improvement with suppliers.
• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.
• Support supplier audits to ensure compliance with quality standards and regulatory requirements.
• Support evaluation and approve new suppliers based on quality performance and capability assessments.
• Documentation: Maintaining accurate records, reports, and documentation related to supplier audits, evaluations, and inspections.
• Supports supply chain in the selection and qualification of suppliers’ parts being procured - FAI (First Article Inspection).
• Any ad-hoc duty as assigned by Superior.

Job Requirements

• Requires a Bachelor’s Degree in Engineering or related field with minimum 3-4 years of related experience.
• Requires experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers, internal teams, and customers.
• Able to read blueprints and/or drawing standards.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage