Requirement

• GCE O Levels with more than 2 years of working experience in telemarketing (inbound and outbound calls), customer service or debt collection (in a call centre environment)
• Highly independent and organized
• Team player with a positive attitude
• Pleasant personality
• Pleasant and firm phone skills
• Good communication skills (verbal communication)

Description

• Handle inbound and outbound collection calls in a call centre environment
• Communicate and explain breakdown of amount payable to customers in detail
• Negotiate with customers on repayment amount and payment dates, where applicable
• Provide customer service and enhance overall collections efficiency and delinquency rates
• Resolve customer issues and handle walk-in customers who wish to make payment

The Environmental Control Officer is responsible for identifying any environmental health irregularities and recommend measures in maintaining good environmental health.

A summary of the responsibilities of this position are, and not limited to, as follows:

Job Description

• Establish the objectives and process necessary to deliver results in accordance with the organization’s environmental policy
• Check, monitor and measure processes against environmental policy, objectives, targets, legal and other requirements and reports the results
• Take actions to continually improve performance of the environmental management system
• Inspect the construction site to ensure all facilities and equipment relevant to the maintenance of environmental health are in proper working condition and do not pose any environmental health hazard
• Highlight environmental health irregularities such as mosquito and fly breeding, rodent infestation, noise/dust/smoke/water pollution, poor housekeeping, earth littering, poor refuse management, poor maintenance of sanitary facilities etc. with the Site Management team and recommend rectification measures
• Assist authorities to investigate any outbreaks of infectious, vector borne or food borne diseases at site
• Investigate public complaints on environmental issues
• Organise campaigns, training courses and other promotional activities to develop and sustain the interests of workers in maintaining good environmental health standards at site

Value Add of Position

• Ability to anticipate potential environmental health irregularities in site works
• Use of construction technologies or innovative green solutions to address energy efficiency, environmental concerns at site

Technical Competencies

• Environmental Management System (ISO 14001)
• Environmental Legislation
• Green and Gracious Builder Scheme
• Environmental Impact Assessments

Qualifications and Education Requirements

• Education: Minimum a Technical Diploma from a recognized polytechnic
• Experience: Minimum 3 years of relevant experience in environmental engineering, environmental health or related
• Registered Environmental Control Officer with National Environment Agency
• Earth Control Measures Officer course
• Introduction to Waste Management in Singapore
• Certification in Manage Hazardous Substances
• Certification in Control Noise and Vibration

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Environmental Control Officer (ECO)

Monitor strict compliance of “Permit to Work” system at worksite & explain the importance to workers at the time of safety talk/tool box meeting Coordinate Environmental Control Committee Meeting and implement all environmental control programs
Maintain mandatory records and other documentation as required by the regulatory authorities
Ensure compliance of operations with NEA and EHS regulations
Prepare Site Environmental Control Report on a regular basis
Conduct environmental control audit and investigations
Able to maintain environmental requirements in line with OHSAS click apply
Ensure compliance with environmental regulations, develop environmental control plan, site clean-up plans & monitor their completion

Job Requirements
Candidate must possess at least Diploma/Degree in Civil Engineering or its equivalent
Candidate must be a NEA registered ECO
Minimum 3 Years’ Relevant Experience In Building Construction Industry With FSM certificate will be an advantage
Must have professional knowledge in law and regulations of Environment Acts.

Carry out pest control services to our island wide clients that varies from Government Sector, Industries and Construction developments.

Requirements:

Class 3 Driving License (Manual), PSLE with no experience - OJT and NEA course will be provided.

Job Description & Requirements

Company Benefits:

• NEA Technician Certificate in Pest Control (Training sponsored by the company)
• Company Transportation provided
• Valid Class 2 Riders or 3 Driver’s License required

Responsibilities:

• Inspect properties to identify pest infestations and assess the extent of damage.
• Apply appropriate pest control treatments using safe and approved methods.
• Communicate with clients to explain treatment plans and provide prevention tips.
• Maintain accurate records of services provided and chemicals used.
• Ensure compliance with safety regulations and environmental guidelines.
• Perform follow-up visits to ensure the effectiveness of treatments.
• Maintain tools and equipment in good condition.
• Report any issues or recommendations to supervisors.

Eligibility: Quota available.

Application: Please email your resume to [email protected]

Environmental Control Officer (ECO) cum Safety Coordinator

Primary Objective

Ensure construction projects comply with environmental regulations and minimize environmental impact.

Plan, manage, and ensure workplace safety and health compliance

Familiar with NEA, MOM regulations and WSH Coordinator duties

Advise and act on measures to improve workplace safety and health

Conduct WSH compliance an daily inspection of project activities

Key Activities

1. Environmental Compliance and Monitoring

• Ensure all construction activities comply with local environmental laws, regulations, and project-specific requirements.
• Monitor site activities to identify potential environmental risks and implement mitigation measures.
• Conduct regular site inspections to ensure proper implementation of environmental control measures.

2. Waste and Pollution Management

• Oversee the proper handling, storage, and disposal of construction waste materials.
• Implement pollution prevention measures, including noise, dust, and water pollution controls.
• Monitor wastewater discharge and ensure compliance with discharge permits.

3. Environmental Documentation

• Prepare and maintain environmental management plans (EMP), reports, and checklists.
• Submit periodic environmental compliance reports to authorities and project stakeholders.
• Maintain records of environmental incidents and the corrective actions taken.

4. Training and Awareness

• Conduct training sessions for site staff on environmental best practices and compliance requirements.
• Raise awareness among workers about environmental protection and sustainability.

5. Liaison with Authorities and Stakeholders

• Act as the point of contact with environmental authorities and regulatory bodies during inspections or audits.
• Work with project managers, engineers, and subcontractors to resolve environmental issues.

6. Incident Response and Risk Mitigation

• Respond to environmental incidents promptly and implement corrective actions.
• Conduct root cause analyses of environmental non-compliance or accidents.

7. Sustainable Practices

• Promote the use of eco-friendly construction materials and techniques.
• Advocate for sustainable practices in resource use, such as energy and water conservation.

8. Reporting and Advising

• Provide regular updates to senior management on environmental performance and areas for improvement.
• Advise on potential environmental risks and recommend preventive measures.

We are looking for a Data Control engineer with experience in Data management, Good knowledge in writing queries to extract the data, automate the report generation through reporting tools .

Requirements:

1.Understand the data requirements from various departments

2.Extract data from database by writing queries and share the reports with the stakeholders

3.Automate the frequently used data reports using the Reporting tool and provision the secured access to stake holder on the reports

4.Manage Database backup and restore

5.Ensure data security

6.Capacity planning and Database finetuning from time to time to increase DB performance

Roles:

• To perform daily backup monitoring and take action to have recovery solution in place.
• To Manage the database availability and performance, including incident and problem management.
• To work with Major Incident Management (MIM) team to resolve and co-ordinate high critical issues.
• To carry out periodical production patch and upgrade management.
• To work closely with users and vendors to take timely and appropriate steps to resolve and troubleshoot issues impacting service levels.
• To Identify opportunities for process improvements, automation, and efficiency gains in database operations.
• To Implement best practices and innovative solutions to enhance system reliability and performance.

Preferred Qualifications:

• Diploma/Degree in Computer Science or Engineering equivalent.
• At least 2-4 years of relevant working experience as a Database Administrator or relavant engineering experience within similar capacity operations.
• Must have familiarity with at least 2 database SAP tools,SQL, ...
• Experience in 24x7 support for critical production systems, scheduled maintenance, and release deployment activities.
• Excellent problem solving skills.
• Good Software application experience.

• Ensure compliance with the latest environmental regulations.
• Perform the duties of an Environmental Control Officer in the project works
• Conduct regular inspections to ensure Environmental Control Measures (ECM) and environmental plan in place
• Identify environmental issues and recommend measures to rectify the irregularities.
• Proper documentation of all EHS records, certificates, notice and official related EHS correspondence
• Liaise with the government authorities on all environmental control issues. (MOM, NEA, PUB, etc)

Requirement:

- short-term role (3 months contract)

- 5.5 days per week

- HDB experience

- Commence end of January

- Location Woodlands

Job Description & Requirements

-To carry out pest control service for various client’s premises such as town council , F & B outlet , schools , residences blocks , office buildings and etc.

- To ensure and maintain company equipment in a good and working condition

- To submit service report to client promptly

- With / Without Experience are welcome (training will be provided)

- Class 3 driving licence will be an advantage

- A valid full vector control worker / technician licence will be an advantage

- Able to work OT will be an advantage

- Physically Fit and able to read/write

- Welcome Retirees / Senior Citizen to apply

- For Singaporean / PR only

The Environmental Control Officer is responsible for identifying any environmental health irregularities and recommend measures in maintaining good environmental health.

A summary of the responsibilities of this position are, and not limited to, as follows:

Job Description

• Establish the objectives and process necessary to deliver results in accordance with the organization’s environmental policy
• Check, monitor and measure processes against environmental policy, objectives, targets, legal and other requirements and reports the results
• Take actions to continually improve performance of the environmental management system
• Inspect the construction site to ensure all facilities and equipment relevant to the maintenance of environmental health are in proper working condition and do not pose any environmental health hazard
• Highlight environmental health irregularities such as mosquito and fly breeding, rodent infestation, noise/dust/smoke/water pollution, poor housekeeping, earth littering, poor refuse management, poor maintenance of sanitary facilities etc. with the Site Management team and recommend rectification measures
• Assist authorities to investigate any outbreaks of infectious, vector borne or food borne diseases at site
• Investigate public complaints on environmental issues
• Organise campaigns, training courses and other promotional activities to develop and sustain the interests of workers in maintaining good environmental health standards at site

Value Add of Position

• Ability to anticipate potential environmental health irregularities in site works
• Use of construction technologies or innovative green solutions to address energy efficiency, environmental concerns at site

Technical Competencies

• Environmental Management System (ISO 14001)
• Environmental Legislation
• Green and Gracious Builder Scheme
• Environmental Impact Assessments

Qualifications and Education Requirements

• Education: Minimum a Technical Diploma from a recognized polytechnic
• Experience: Minimum 3 years of relevant experience in environmental engineering, environmental health or related
• Registered Environmental Control Officer with National Environment Agency
• Earth Control Measures Officer course
• Introduction to Waste Management in Singapore
• Certification in Manage Hazardous Substances
• Certification in Control Noise and Vibration

Responsibilities

• Organise and conduct regular credit and accounts receivable review meetings with business units and sales departments to resolve delinquent accounts.
• Follow up and communicate with customers regarding outstanding payments.
• Review and process new customer account applications.
• Maintain and update customer account details and credit limits in SAP.
• Monitor daily sales transactions for credit holds in SAP and communicate with the sales department to address overdue issues.
• Disseminate invoices, statements of accounts, reminder, and confirmation letters.
• Perform customer account reconciliations and confirmations.
• Prepare regular collections and accounts receivable status reports for management.
• Liaise with insurers to apply for trade credit insurance for customer accounts with credit terms.
• Liaise with banks regarding bank guarantees, including letters of credit.
• Verify supporting documents to carry out billings to customers.
• Perform other ad hoc duties as assigned

Requirements:

• Minimum of 1 year of relevant experience
• Proficiency in SAP software is an advantage
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QX3XY593

Looking for freelancer who has experienced in Johnson control HVAC BMS. Shall be familiar with Fan coil unit bms installation, monitoring, testing and commissioning. Its a existing system. We are looking for experienced Person in Johnson Control and manage independently. Its a freelancer job. Site manpower support will be provided by us.

Job Description:

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements:

• Minimum Diploma or Degree in Chemistry, Food Science and Technology, Analytical Chemistry or equivalent in years of similar experience.

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

质量工程师（Quality Engineer)

Responsibilities:

To manage the Quality Assurance & Quality Control (QA/QC) function so that quality products/services are supplied.

Liaison with customers, consultants, engineers, inspection bodies and suppliers on matters relating to quality assurance.

Coordinating with Production/Plant Managers to conduct investigations on quality deficiencies.

Conduct site visits to ensure that quality of products supplied is within design parameters.

Co-ordinate all QA/QC operations to ensure that customers are satisfied with the level of products/service provided.

Co-ordinate with the Sales and Production Departments to ensure that customer complaints are professionally and efficiently resolved.

Develop QA/QC systems and set achievable targets

Ensure Production comply with quality procedures.

Assist Project Management team on project/safety for daily activities and Quality Management

Work with Production Manager and Plant Manager to minimize defects

Comply with all requirements for the continuity of ISO certifications

Requirement:

Relevant Qualifications in Engineering or equivalent

possess training certificate in ISO Quality Management System, Quality Engineer, CONQUAS, BCA-Good Industry Practices would be advantageous

Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity

Strong communication and interpersonal ability, coupled with influencing skills

Independent and a self-starter, with strong personal drive to initiate and implement

Our client is a US MNC and a Fortune 500 Company that provides Design and Manufacturing solutions to the customers worldwide. They are currently hiring for a Quality Director and will like to invite interested candidate to submit your detailed resume to [email protected]

Quality Director

Responsibilities:

• You will be part of the site Management Team
• Manage entire site Quality system which includes Medical system
• Responsible for all product quality issues, including managing internal and external communication on product qualities.
• Identifies on-going quality issues and makes recommendations to improve current processes
• Interfaces with customers, suppliers, engineering and operational groups on quality related issues
• Responsible to lead 5S & 6 sigma initiatives for the Region
• Provides training in statistical concepts and techniques
• Establish, review & approve quality control methods and procedures
• Plays a key role to provide guidance to site with respect to maintaining quality excellence

Requirements:

• Degree in Mechanical or Electronic / Electrical Engineering or Quality Management with minimum 10 years relevant experience in Quality &/or Management capacity preferably in EMS environment & prior experience in handling FDA audit is preferred
• Excellent knowledge & implementation experience in Six Sigma
• Formal training in ISO Lead Auditor is a definite advantage
• Familiar with ISO-13485 & TL (Telecommunication ) system
• Strong skills in facilitation, analysis & problem solving
• Experience in analyzing of various processes barriers and using TPM methodology to drive improvements and inspection to support operations
• Candidates with Black Belt or Master Black Belt in Lean / Six Sigma will have added advantage
• Ability to work independently with excellent interpersonal relations and deep passion for driving product quality are essential

Reponsibilities:

Documentation:

Responsible for preparing Final QA documents and Submission in Customers portal.

Responsible for preparing the job routers.

Handling TPI and NDE activities:

Generation of issue notes for supplier activities.

Handle and support third party inspectors

Handle and support NDE activities

Responsible for collection and verification of supplier’ NDE process reports

Calibration and Maintenance of instruments:

Maintain master list for all the instruments under Quality department and production.

Regular calibration and maintenance procedures should be established to ensure continued accuracy and performance., periodically monitoring the calibration requirements

Communication:

Effective communication is vital in this role. QA communicate quality-related issues to relevant departments, including production and to Quality Control.

Reporting:

Reports to assistant Manager – Quality and assisting on ad hoc responsibilities

Safety:

Ensuring the safety of the quality control team and compliance with safety protocols is another important aspect of the job.

Requirements:

• Minimum Diploma in Material Engineering or relevant engineering discipline.
• At least 3 years of working experience related to the manufacturing environment, preferably from the oil & gas industry.
• Able to interpret drawings and technical documents
• Able to work independently and contribute to the team excellence
• Good technical competence & strong communication skills
• Good organizing and coordination skills
• NDE level 2 inspector is an advantage

Highlight:

• Transport & Lunch Provided
• Permanent job opportunity
• Great remuneration & benefits
• AWS + VB

Responsibilities:

• Assist in Debts Collection & follow up of overdue account
• Prepare regular & monthly credit related reports to Finance manager/ HOD
• Assist in monitoring monthly debts collection performance
• Investigate and resolve discrepancies relating to non-payment of invoices
• Conduct aged balance review with Finance manager/ HOD to follow up review action
• To adopt collection best practices and apply relevant collections strategies to enhance effectiveness
• Recommend improvements of credit risk measures, controls and processes
• Evaluating new credit request and conducting client credit checks.
• Suggest and implement terms of credit for new clients
• Negotiating payment plans and collection
• Responding client inquiries
• Liaising with customers (internal/ external) to build and foster strong relationships

HOW TO APPLY:

Interested applicants, please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Charmaine Tin Zi Jin

EA Personnel Reg No: R23113892

General Overview

The position is part of the Instrument Control and Electrical (ICE) team who is responsible for developing plans and schedules and providing advice to production and engineering team on all maintenance activities at the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Daily planning and scheduling of maintenance tasks to carry out all required preventive, corrective and predictive maintenance of ICE asset in the Terminal
• Work closely with Mechanical, HSSE team to liaise with the Production and Jetty Operations team in the planning and analysis of each work request including coordinating the acquisition of electronic work permits.
• Carry out daily morning toolbox meeting for job assignments, briefings and any ICE-MECH work coordination communications
• Proficient in SAP to be able to carry out monitoring and scheduling of ICE PM & CM workorders, maintaining of ICE master equipment list, PM plans and raising purchase requisition for spare parts etc
• Liaise with External Authority for approval for Natural Gas Equipment maintenance request
• Close communication and co-ordination with external vendors and contractors to attend in house safety induction course, carry out site survey, site execution work etc
• Review Method of Statement and risk assessments are valid for the job
• Responsible for following up and verification that all jobs for close out are properly completed in SAP
• Raise Purchase requisitions in SAP and provide scope of supply and spare part specifications and work closely with Procurement Department for evaluation of vendor quotations for maintenance service contract/technical work outsourcing, monitoring of delivery of spare parts and materials etc
• Assist in the development of Maintenance budget, provide budget forecast, monitor and manage approved budget.
• Apply Jurong Island Pass sponsorship for external vendor.

Work Experience

• Minimum 5 (Degree) years and 8 (Diploma) years of experience in an oil and gas/petrochemical E&I maintenance supervisory or E&I maintenance planning and scheduling role
• Proficient in usage of Microsoft Office computer software and SAP systems
• Excellent organizational skills and adaptability to work in dynamic environment.

Education

• Engineering Degree/Diploma preferably in Electrical/Instrumentation/Chemical Engineering discipline.

Position: Pest Control Technician

Job Scope:

• Conduct pest inspections and assessments in residential, commercial, and industrial properties.
• Apply pest control treatments using appropriate methods such as spraying, fumigation, or baiting.
• Identify pests and the sources of infestation, providing recommendations for preventing reoccurrence.
• Maintain pest control equipment and ensure it is in good working condition.
• Keep accurate records of treatments, inspections, and pest activity.
• Communicate with clients regarding pest control methods, treatment schedules, and safety precautions.
• Ensure compliance with health and safety regulations, including the safe use of pesticides and chemicals.
• Participate in ongoing training and development to stay up-to-date on pest control methods and safety protocols.

Qualifications:

• Valid Pest Control Certification
• Prior experience in pest control is preferred
• Knowledge of various pest species and control methods.
• Ability to work independently and as part of a team.
• Strong communication and customer service skills.
• Good physical condition, able to handle the physical demands of the job.
• Ability to work flexible hours, including weekends or evenings if needed.

Job Description

• Conduct regular site inspections and ensure environmental compliance
• Report and submit Environmental Control Report in accordance to the prescribed format to the client
• Conduct Meeting
• Plan and organize safety promotion program
• Liaison with relevant authorities, client and all others
• Supervision of Workplace Safety and Environment workers

Requirements:

Must be NEA Registered ECO for Specialised Premises

Minimum 2 years of relevant experience

Knowledge of government regulations relating to occupational safety, health and environmental

Responsibilities

• Prepare, count and distribute components to production team for monthly production usage
• Monitor component stock levels and report to Production Manager monthly
• Execute daily in-bound goods into warehouse effectively
• Perform inspections with QC team to ensure components' quality adhere to standards and prepare report for the Production Manager
• Maintain accurate production documentation
• Utilize Microsoft Office, especially Excel, for data tracking and reporting
• Support production planning and control processes with the Production Manager
• Perform any other ad-hoc projects or tasks to be assigned by the HOD/ Management from time to time

Requirements

• Diploma in mechanical/electronics engineering or any relevant ITE cert/Technical skills certificate or 1-year work experience in electronics industry
• Able to read and understand electronic schematics and user diagnostic tools such as multimeter, oscilloscope and LCR meter
• Computer literate (Excel and Word)
• Good team player, possess initiative & ability to work independently
• Knowledge of SAPB1 Module is preferred but not a must
• Knowledge of ISO 9001 will be an advantage
• Only applicants that do not need a work pass need apply

• To attend / acknowledge mails received from various clients and brokers and ensure response given within a reasonable time
• To liaise with the underwriting departments and the claim departments in context of the various request received from clients / brokers
• To generate the Statement of Accounts (SOAs) from the system, reconcile them regularly and exchange with the clients and brokers
• To liaise with the payment department for timely payments to the clients / brokers
• To keep chasing brokers / clients for company’s dues and ensure timely realization of outstanding premium
• Reporting to the underwriting department for long outstanding cases
• Perform reconciliation of the SOAs in a timely manner
• Resolve unallocated receipts and liaise with the internal and external stakeholders
• Submission of credit control report
• Debtors ageing status reviewing
• Any other duties assigned by Head of Department (HOD)

Requirement

• Candidate must possess at least Diploma in Accounting/Finance/Banking or equivalent.
• Candidate who can cope with high volume of transactions.
• Candidate who is available within short notice
• Proficient in Microsoft Office
• Meticulous, have an eye on detail, flexible
• Singapore Citizen and Permanent Residents only

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.