Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

• To promote a Zero Harm culture & best practices through the implementation of a tailored safety, quality and environmental management system including the development and implementation of appropriate policies & procedures to ensure a safe and efficient workplace.
• To ensure regulatory compliance & due diligence to safety, health, quality, dangerous good/hazardous substances and environmental obligations.
• To liaise with all business units on matters relating to safety, quality and environment including potential non-compliance of a regulatory nature.
• Compliance with all relevant safety, quality, environmental & P&C policies & procedures to ensure a safe work environment at all times.
• Actively liaise with all departments to ensure quality control, quality assurance and safe practices are adhered to at all times.
• Work with A-Gas management to implement its policies, procedures, work instructions, mission and goals.
• Lead by example in demonstrating personal qualities, behavioural traits and A-Gas values & behaviours.
• Timely management reporting in the manner and form as required from time to time.
• Perform site inspections as required.
• Actively participate in internal & external project meetings and provide sound recommendations on SQE initiatives and/or highlight any deviations & possible risks if any.
• Manage & maintain integrated certified Safety, Quality, Environmental management systems to ensure continued compliance to ISO 9001, ISO45001, ISO14001, ISO17025 (NATA), and other relevant standards like ISO 31000 where applicable.
• Identify and maintain compliance to relevant WHS, Environmental & other acts, regulations, codes of practices & guidelines etc.
• Audit SQE Management System, including reviewing, monitoring, measuring, reporting on performance.
• Recommend and implement continual improvement to the SQE system, work instructions and associated processes.
• Promoting awareness of SQE requirements, communicating and consulting with all staff & other stakeholders on SQE processes, documentation and regulatory requirements.
• Development and implementation of SQE documentation relevant but not limited to procedures, plans, hazard and aspect identification, risk assessments, emergency preparedness & response, design & development, management of change, control measures, management review including ad hoc measures based on current environmental occurrences.
• Actively lead & participate in Operational Safety, Process Safety, Risk Assessment, HAZOPs, Pre-Purchase Risk Assessments, Management of Change & Design & Development, SQE incident investigation & root cause analysis and processes.
• Active participation and collaborating to provide SQE / technical advise as required to the Lab Team, Customer Service, Operations, Engineering, Rapid Recovery and wider A-Gas Group & other relevant stakeholders.

Key Responsibilities:

· Implement methods to inspect, test and evaluate products and production equipment.

· Inspect Incoming raw materials’ quality (IQC).

· Ensure that products adhere to quality standards.

· Prepare reports by collecting, analyzing and summarizing data.

· Train and manage production line staff in production practices and quality assessment of goods.

· Track products in WIP (Work in Process) to guarantee that each part of the process is correct.

· Improve Production Yield by ensuring good QA practices and implementing corrective actions.

Qualifications:

· Diploma or higher in Quality Management, Engineering, or a related field.

· Minimum of 5–8 years of experience in quality assurance/control within a Manufacturing, Aerospace, or related industry.

· In-depth understanding of AS9100 or ISO9001, and regulatory compliance frameworks specific to Aviation.

· Experience in Calibration procedures and maintaining Inspection Tools and Systems.

· Excellent problem-solving skills with a keen attention to details.

· Ability to work independently as well as collaboratively within a team.

· Good team player, good attitude, honest, discipline, positive thinking, resourceful, and a good problem solver.

· Excellent communication skills to foster effective teamwork and communication within the operations team and the customers.

How to Apply:

If you are passionate with the Aerospace industry and want to be part of a forward-thinking company at the forefront of the Aviation Industry, dedicated to exceeding customer expectations, and navigating the dynamic Aviation landscape, and where your expertise in Quality Assurance will help shape innovative and reliable Aviation Solutions, we invite you to join REETZ and work with us to take the Company to a new height. Please submit your application to the email address: [email protected]

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

Note: This role requires frequent travel and will be based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Key Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to address and resolve abnormal quality issues within the manufacturing process.
• Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Drive efforts to improve internal quality control procedures and enhance process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead initiatives to resolve customer-reported quality issues, ensuring timely and effective resolutions.
• Prepare detailed reports for stakeholders outlining corrective actions and preventive measures.
• Develop and implement strategies to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to enhance inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a unified approach toward achieving quality objectives.
• Manage personnel-related tasks, including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Oversee the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor’s degree in a relevant field; advanced degree preferred.
• A minimum of 6-8 years of proven experience in quality management, particularly within manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience collaborating with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.
• Willingness to travel frequently and be based in China and Vietnam for at least 10 months per year (separate living accommodations provided). The role includes annual 4 round-trip tickets back to Singapore.

Microbiology and Biochemical Product Testing:

• Perform EM such as active air sampling, surface and passive air samplings, plate readings and inspection of cleaned facility and sterilised equipment
• Responsible for planning,monitoring and approving microbiological testing
• Perform method Qualification,validation and product testing (e.g. sterility and endoxin) to support QC lot release.
• Perform stability testing of released final products as per protocol and timelines.
• Support assessment of certification/accreditation and services provided by external labs for QC testing.
• Knowledge in biochemical testing, including cell counts, flow cytometry, ELISA, PCR analysis, and compendial testing (pH, Appearance) as per USP, JP, and EP standards

Documents, Records and Data Management:

• Drafting and updating of Standard Operation Procedures (SOPs) and specification documents for EM, equipment, sampling plan, test methods, final products and raw/packaging materials.
• Author and review technical protocols and reports (e.g. EM risk analysis), develop guidelines and standard practices for data documentation, analysis and training.
• Review test results, document data and produce trends (e.g. EM) in an efficient, organised and presentable manner to facilitate discussions, support business and performance metrics reporting.

Deviations, Change Control and Audits Management:

• Support deviations (e.g. test OOS, EM excursion) initiation, investigations and root cause analysis for product defects and quality lapses.
• Support change control and CAPA implementation.
• Support internal and external audits/inspections.

Equipment and Lab Management:

• New equipement commisihing support( Operational qualification-OQ, Performance qualification- PQ
• Monitor and schedule equipment calibration and maintenance as per schedule and site master file.
• Perform lab housekeeping, lab cleaning and biohazard/waste management.
• Perform monitoring and procurement of lab inventory, for e.g. materials and consumables.

Continuous Improvement:

• Implement initiatives to encourage improvement of QC procedures, activities and workflows.
• Conduct routine literature review through established publication channels to ensure continual knowledge proficiency on both GMP and current technological trends relevant to CellVec’s activities.

• Well Established Medical Devices Manufacturing Company
• Basic $2300 - $3000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working hours: 12 Hours Shift

Job Responsibilities:

• Carry out inspection of incoming materials and finished products according to operational instructions to ensure that materials or products meet the requirements
• Ensure product identification is correct and stored in the correct location, maintenance of inspection equipment and daily monitoring of production environment
• Statistics on the quality status of incoming materials and processes and the quality of shipped products
• Report abnormalities to superior in timely manner and inform relevant departments and track the improvement status of non-conformities
• Assist in customer complaint analysis and take corresponding improvement measures
• Ensure records comply with good writing practice GDP requirements
• Assist the superior to complete other tasks

Job Requirements:

• At least 1 year of quality management experience and basic computer software
• Blueprint reading capabilities, and ability to use measuring devices like gauges, meters, calipers
• Documentation and reporting skills

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Perform all aspects of QC responsibilities as it pertains to release activities that will include but is not limited to: sampling, testing, and disposition of raw materials and final packaging/ component lots
• Support additional areas of QC including Rejected, Quality Hold, and Non-conforming materials.
• Perform all activities adhering to strict cGMP guidelines
• Maintain on-time completion of all training requirements
• Perform simple laboratory instrument up keep including the cleaning, calibration, and the preventative maintenance of the instrument as outlined within the departments governing procedures
• Participate in department initiatives to support the continuous improvement of the quality systems of the QC department
• Practice safe work habits and adhere to safety procedures and guidelines

Requirements:

• Min Degree in Science or equivalent with at least 2 years of relevant experience in the pharmaceutical / chemical manufacturing industry.
• or Diploma in Chemistry, Lifescience, Pharmaceutical Science or any related course of studies with more than 5 years of experience
• Experience in operating laboratory equipment such as HPLC, GC , KF Titrators.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Recruiter Reference Code: #HCG

Details of the Division and Team:

The Cash Product Management Team is seeking a Data Quality and Control Specialist who will drive forward the Data Product pillar data risk and control transformation compliance agenda within the Cash Product team, based in Singapore.

In this role you will contribute to our data risk and control transformation compliance within Cash Management, driving and consolidating considerable change management and delivering best data practices into the core of our Cash franchise to achieve a stronger performance for the Corporate Bank and Deutsche Bank. You will report into the Data Quality and Control Lead who is accountable for one of our four pillars under the Data Pillar function. You will work with our global Product, Sales & Services teams and downstream consumers to focus on delivery of our target data state for cash – ensuring completeness & integrity are assured through our transformation programs throughout the Corporate Bank.

What we will offer you:

A healthy, engaged and well-supported workforce is better equipped to do their best work and, more importantly, enjoy their lives inside and outside the workplace. That’s why we are committed to providing an environment with your development and wellbeing at its center.

You can expect:

• Flexible benefits plan including virtual doctor consultation services
• Comprehensive leave benefits
• Gender Neutral Parental Leave
• Flexible working arrangements
• 25 days of annual paid leave, plus public holiday & Flexible Working Arrangement

Your key responsibilities:

• Drive forward with the global product owner’s data risk prioritization to improve the control landscape.
• Ensure gaps in data quality and controls are presented alongside the risks to the business and downstream consumers. Ensure benefits of data transformation are clearly articulated up to forums.
• Consolidate all the data control and data risk demands for onward Product discussion and prioritization to our Cash Data Transformation Programme.
• Embed a data driven culture and discipline throughout the Cash Organization, enforce risk based priority to the function to drive control enhancements to our data.
• Produce reporting content on the progress and maturity level against target state to various forums.
• Engage with Central Data teams on Regulation, Policy & Framework updates to ensure alignment of Cash with regulations & DB policies

Your skills and experience:

• Minimum 10 years in the Financial Industry.
• Minimum 7 years experience in Corporate Bank or Investment Bank.
• 4-5 years driving forward data quality and controls within their role either in Corporate Bank or Investment Bank.
• Strong awareness of managing data quality and improving the control environment.
• Strong literacy in Data topics & an appetite for ongoing learning
• Strong risk awareness and experience in identifying, measuring and tracking business risks
• Working technology knowledge and architecture planning skills to ensure solutions to risks/issues are embedded in target state whilst effectively mitigating near term challenges

Role is required to be performed on-site at One Raffles Quay office. Relevant vaccination requirements may apply.

How we’ll support you:

• Coaching and support from experts in your team
• A culture of continuous learning to aid progression
• A range of flexible benefits that you can tailor to suit your needs
• Training and development to help you excel in your career
• Coaching and support from experts in your team

About us and our teams:

Deutsche Bank is the leading German bank with strong European roots and a global network. click here to see what we do.

Deutsche Bank & Diversity

We strive for a culture in which we are empowered to excel together every day. This includes acting responsibly, thinking commercially, taking initiative and working collaboratively.

Together we share and celebrate the successes of our people. Together we are Deutsche Bank Group.

We welcome applications from all people and promote a positive, fair and inclusive work environment.

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Quality Technician, Product Quality is responsible for product release of complete instrument and play key role in ensuring the released instrument is meeting quality and regulatory requirements.

This position reports to the Senior Manager, PQE and is part of the QARA team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Perform outgoing product release (Device History Records buy-off) and inspection on instruments according to documented procedures.
• Perform part tracking for install and complaint issues. Ensure part is being received so failure analysis can be initiated.
• Support in complaint investigation activities. The job also require work with cross functional team and ensure proper investigation records is generated.

The essential requirements of the job include

• Diploma/ ITE in Engineering or equivalent.
• 2-3 years of relevant working experience in QA is required.
• Knowledge of the following QMS standards - ISO9001 QMS, ISO13485 QMS and FDA 21 CFR Part 820 is strongly

It would be a plus if you also possess previous experience in:

• Experience with working in a manufacturing environment is preferred.
• Experience in performing product release activity for medical equipment’s.

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Medical Devices Manufacturing Company
• Basic $2200 - $3000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working hours: 12 Hours Shift

Job Responsibilities:

• Carry out inspection of incoming materials and finished products according to operational instructions to ensure that materials or products meet the requirements
• Ensure product identification is correct and stored in the correct location, maintenance of inspection equipment and daily monitoring of production environment
• Statistics on the quality status of incoming materials and processes and the quality of shipped products
• Report abnormalities to superior in timely manner and inform relevant departments and track the improvement status of non-conformities
• Assist in customer complaint analysis and take corresponding improvement measures
• Ensure records comply with good writing practice GDP requirements
• Assist the superior to complete other tasks

Job Requirements:

• At least 1 year of quality management experience and basic computer software
• Blueprint reading capabilities, and ability to use measuring devices like gauges, meters, calipers
• Documentation and reporting skills

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• Generate inspection report, Certificate of Compliance (COC) and other relevant documents required for shipping
• Prepare inspection, Frist Article inspection report, other QC reports as specified in the quality plan
• Convert raw files to PDF format; scan files and electronically store into various databases
• Coordinate with production supervisors whenever product quality out of specification
• Any other ad hoc duties as per assigned by superior

Requirements

• Minimum GCE ‘O’ level & above
• Knowlege in basic computer skills
• Able to work as a team player, pro-active, self-motivated and high sense of responsibility.
• Will provided with Training
• Able to commit for a period of at least 6 months
• Working Location: Ubi area

* Kindly indicate the period you are able to commit to the intership in resume*

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Our client is a US MNC and a Fortune 500 Company that provides Design and Manufacturing solutions to the customers worldwide. They are currently hiring for a Quality Director and will like to invite interested candidate to submit your detailed resume to [email protected]

Quality Director

Responsibilities:

• You will be part of the site Management Team
• Manage entire site Quality system which includes Medical system
• Responsible for all product quality issues, including managing internal and external communication on product qualities.
• Identifies on-going quality issues and makes recommendations to improve current processes
• Interfaces with customers, suppliers, engineering and operational groups on quality related issues
• Responsible to lead 5S & 6 sigma initiatives for the Region
• Provides training in statistical concepts and techniques
• Establish, review & approve quality control methods and procedures
• Plays a key role to provide guidance to site with respect to maintaining quality excellence

Requirements:

• Degree in Mechanical or Electronic / Electrical Engineering or Quality Management with minimum 10 years relevant experience in Quality &/or Management capacity preferably in EMS environment & prior experience in handling FDA audit is preferred
• Excellent knowledge & implementation experience in Six Sigma
• Formal training in ISO Lead Auditor is a definite advantage
• Familiar with ISO-13485 & TL (Telecommunication ) system
• Strong skills in facilitation, analysis & problem solving
• Experience in analyzing of various processes barriers and using TPM methodology to drive improvements and inspection to support operations
• Candidates with Black Belt or Master Black Belt in Lean / Six Sigma will have added advantage
• Ability to work independently with excellent interpersonal relations and deep passion for driving product quality are essential

Job description

Non-Destructive Testing (NDT) technicians examine structures, vehicles, and products for flaws and structural weaknesses using non-destructive testing techniques. They conduct material tests, interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering, or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound, infrared, and radiographic.

About the Job

The Quality Department plays a very important role in Cyrus in maintaining the quality management system and driving quality improvements to deliver high quality products for our customers. You will be working closely with the Assistant Quality Manager on Quality Management System (QMS) and suppliers’ management.

Your key responsibilities are as follows:

- Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review.

- Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits.

- Coordinate with internal stakeholders to participate in customer or supplier audits for compliance

- Review audit findings and develop action plans to drive continuous improvements.

- Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement.

- Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure.

- Support the qualification of new suppliers to maintain a healthy pipeline of qualified suppliers to meet Cyrus production requirements.

- Maintain and conduct regular review of calibration and preventive maintenance for equipment.

- Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.

- Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.

- Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.

- Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.

Your areas of knowledge and expertise that matter most for this role:

· Diploma in quality management / Engineering / Manufacturing or related field

· Minimum 3 to 5 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.

· Knowledge in Supplier Management

· Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301.

· Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

· Familiar with 8D and 5W problem solving methodology.

· Good communication and presentation skills

· Organized and detail oriented.

· Positive attitude with ability to multi task.

· Independent, takes initiatives and able to work with minimum supervision.

· Good team player with good initiatives and ability to work independently.

Responsibilities:

·Driving Root Cause analysis in problem diagnosis from customer anomaly to ensure problem prevention and resolution implementation ensuring effectiveness

·Management of Change communication to customer for approval to implementation

·Develop, implement, and improve the department and product total quality system to assure product specification is met

·Facilitate and work with team members on quality improvement to the product by providing technical guidance in QE tools applications

·Perform quality system or process audit to assure quality systems are in place

·Support the viper manufacturing in ensuring product meets the established standards of quality including reliability, usability and performance required

·Establish & Implement manufacturing quality metrics and lead team on to achieve the goal and continuous improvement

·Meet Plant/Department cost & quality objectives

·Implement lessons learned across manufacturing and also new products development projects

·Perform special projects to support continuous improvement on an ongoing basis thru functional standardization and implement process improvement ideas in primary work area.

·To adhere to the Health & Safety regulations as set out by the EHS Department and any other Government regulations

EDUCATION AND EXPERIENCE (Minimum Qualifications)

Degree in Electronics Engineering

5 years of experience in a Quality/Engineering in Product Design Engineering/Manufacturing environment preferred

SKILLS

Analytical problem-solving skills

Proficient oral and written communication/presentation skills

Basic print reading and interpretation of specification skills

Good knowledge of FMEA, Control Plan

Advanced statistical experience with quality tools usage and Product Design Development Cycle is preferred

Certified Design for Six Sigma/Six Sigma Black Belt/Reliability Engineer will have an added advantage

*Disclaimer statement:
Career Scam Disclaimer: BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website. To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. Applicants should never provide their Social Security numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. Job applicants are invited to contact BorgWarner through BorgWarner’s website to verify the authenticity of any employment opportunities

Job Description

· Maintain and upkeep AS 9100 and ISO 45001 requirements and procedures

· Conduct Internal Quality/ Process Audit and attend to external audit needs.

· Manage/ Perform and fulfil customer quality requirements includes document and reports submission.

· Manage First Article requirements which includes CMM programming.

· Quality Methodology – Training Material or past Stimulated Results will be used.

· Prepare and submission of Quality KPI.

· other duties assigned by the superior

Job Requirements:

· Min Diploma in Mechanical or equivalent

· Able to work independently.

· Knowledge in AS9100

· Good knowledge in Engineering Drawing Interpretation and GDT.

· Experience in CMM operations will be advantage added.

Job Description and Responsibilities

•Drive key projects in Card Operations, together with business users and technology team, to increase efficiency, improve productivity and enhance customer journey.

•Execute standardization, risk and control agenda in Cards product-processes, including self-assessments, internal reviews and audit reviews, and ensure compliance with operational policies, procedures and regulations.

•Prepare risk review reports, report findings, recommend corrective actions and preventiveactions.

•Review and recommend process improvement for productivity effectiveness and efficiency, which includes performing problem analysis on processes and provide recommendation for change and mitigation of risks.

•Develop training and/or change management materials and activities to support new processesand procedures.

•Manage the Business Continuity Planning (BCP) exercises in Card Operations as part of theBusiness Continuity Management.

Job Requirements:

•Degree Holder

•Preferably 3 – 5 years’ experience in operations / process re-engineering function. Fresh graduates are welcome to apply

•Able to multi-task and cope with change and diversity in a fast-paced environment

•Possess strong analytical and problem-solving skills, able to think objectively and 'think outside the box' when analyzing issues

•Meticulous with an eye for details and quality mindset

•Strong command of English with excellent verbal/written communication and interpersonal skills

•Able to liaise with various functions and stakeholders

•Proficient in the use of Microsoft Office, specifically Microsoft Excel Macro, Powerpoint &Access

•Knowledge in Python is preferred.

•Team player, self-motivated and resourceful

As a FECOS Inventory Control – Probe/PC at Micron Technology, Inc., you will be responsible for overseeing the management of the FECOS Probe team and PC (Production Control) team. These teams are primarily responsible to help to improve Probe and Non-Productive Wafers (NPW) Operations planning and execution within the tactical horizon window.

You will be responsible for collaborating with Front End Manufacturing Inventory output and Probe stakeholders to deliver probe tactical solutions and BKM sharing across the network as well as management of NPW to meet output plan at lowest cost. This will be achieved by developing metrics that clarify deliverables, and by providing front-end manufacturing experience and expertise and influencing key business partners (Supply Chain, SMAI, TSE, Procurement, IE etc). You will build effective global team by distributing work and learning opportunities functionally and regionally, and by empowering team members with the authority to make decisions at the appropriate level and geographically. You will deliver competitive results by spearheading innovative solutions, removing barriers and assisting in troubleshooting and escalating issues.

Responsibilities and Tasks

Performance Management

· Drives Micron Behaviors and FE Central team competencies.

· Ensure clear direction, performance goals, job profiles and job expectations are established for all Team Members.

· Provide a work environment that empowers employees to creatively improve their work environment, instills a sense of ownership in Micron, and supports a team effort.

· Complete written evaluations and a mid-year check-point for each direct report once per year. This includes performance appraisals and work plans that outline Team Members’ strengths and weaknesses, identify areas for improvement, and include a plan for with specific guidance for improving skills. Be specific on the overall performance of the direct report in each category. Clearly outline goals for each Team Member that will impact department goals. Update SuccessFactors with employee information.

· Partner with Team Members on establishing aggressive but achievable goals. Maintain a balance between task-related goals versus results-driven goals.

· Execute short-term goals within Production Operations to meet company Strategic Objectives

· Recruit top-caliber members for the team.

· Drive accountability through clear communication, informal feedback, effective project management, and appropriate usage of metrics.

· Ensure that promotion and recognition programs are aligned to recognize and incentivize high-performing Team Members.

· Ensure that low-performing Team Members are systematically identified and managed.

Strategic Leadership

· Provide “Vision” and “Mission” for Production Operations. Ensure that this vision aligns with needs of the business both internal and external to operations.

· Work with key stakeholders on Production Operations process, systems, methodologies, capabilities and roadmaps. Production Operations to include BKM sharing, Front end operations tactical management support, front end Quarter lock, Cycle time management and etc. Ensure that such support meet Fabs expectations to enable achievement of Tactical objectives and Micron’s business plan.

· Ensure alignment of WW Production Operations to close gaps to benchmark in cycle time. Work in close partnership with MFG sites and supply chain to install correct countermeasures and insure their continuity into the future.

· Develop and track metrics regarding Fab Production Operations performance. Ensure plans are in place to drive key factory metrics to industry-leading performance.

· Create an environment with your group that encourages innovation and technical leadership.

· Work with business partners to ensure best talent is mobilized to business-critical deliverables.

Tactical Leadership

· Conduct ongoing metrics reviews of critical group deliverables to business. Ensure that work reviews are conducted on all programs, projects and critical activities to ensure achievement of committed performance. Establish structure for subordinate manager to conduct such reviews within their teams. Ensure that such reviews are aligned and effective.

· Establish weekly projection plans and step goals and monitor probe/NPW performance to control variance of plan.

· Provide MFG related data support for site business plan and work with IE and ENG to build related capacity model

· Optimize line efficiency to drive for max probe output to meet output/sample plan at lowest cost.

· Responsible to establish governance on best known methodologies and practices to be applied across the Front End network.

· Provide direct leadership on most critical group deliverables and escalated performance items to ensure barriers are removed and correct resources are applied. Ensure that timely and transparent communication with business partners if performance issues will risk business objectives.

· Provide monthly one-on-one sessions to review progress to the and adjust training and performance goals.

· Facilitate the Global Probe regular meeting with key business partners. Ensure that resources are assigned to drive actions defined from meetings.

· Execute, maintain, and continuously improve operations project management and business process in alignment in accordance with QMS standards.

· Develop group leadership to ensure all Team Members receive quality leadership, performance management and assistance from their management team to achieve or exceed expectations.

· Effectively manage team’s internal and worldwide meeting structure. Ensure meetings are efficient, effective and targeted to achieve required outcomes. Effectively reduce your team’s number of FTE spent in meetings.

· Coordinate escalation issues between manufacturing sites as required to drive operations objectives.

Communication

· Provide regular and structured communications to your team, including progress toward strategic objectives, operations goals, priority projects, and company status. Ensure that Team Members are well-engaged and motivated to achieve group and company objectives. Ensure that subordinate managers communicate consistently and in alignment with your regular communications.

· Ensure that structured communications with Team Members provide proper motivation and optimism toward achieving Production Operations execution.

· Provide a work environment that empowers employees to creatively improve their work environment, instills a sense of ownership in Production Operations, and supports a team effort.

· Ensure that leaders, at all levels, engage in productive two-way communications with Team Members.

· Provide regular Probe/NPW Planning Operations updates to key business partners. Updates should show progress against timelines and metrics to add to vision and direction.

· Develop external relationships to achieve new ideas and procedures to keep pace with industry standards and methods.

· Manage communication on critical projects and activities through Change-ABLE methodology. Be prepared to share status of any underperforming project or activity, along with actions required to resolve performance problems.

· Demonstrate cultural sensitivity - Show respect for different cultures and languages; invite feedback to ensure that others understand.

Training and Career Development

· Ensure that the group’s training roadmap is maintained. Focus on developing leading-edge skills and preventing isolated skill sets that risk business continuity.

· Ensure that all leaders have required leadership training and fully understand manager expectations for the position.

· Ensure that leaders set specific training plans, performance goals and development activities for their Team Members.

· Hold quarterly career development discussions with direct report and ensure leaders do the same for Team Members.

· Ensure that leaders are involved in and supporting the use of training plans.

· Leverage Micron’s training tools and programs for standardization and efficiency.

· Ensure that training is provided to partners, internal and external, for business processes.

· Establish and maintain GJS skill sets for each position in your group.

· Develop potential successors within your group and coach/mentor to develop skills.

Safety

· Provide leadership for process safety management systems development and sustainment. Target to achieve zero major event occurrences across the Micron manufacturing network.

· Maintain knowledge of equipment and materials safety concerns.

· Ensure that all sites understand any safety concern for equipment installation and have access to equipment and materials safety information.

· Encourage and create a culture of safety.

· Engage proactively in safety-related issues, and utilize corporate and site safety resources to escalate issues as appropriate.

Education

Required

Bachelors Degree or equivalent experience

· Engineering

· Production and Operations Management (POM)

· Related field of study

Experience

Required

5 years' experience in any of the following:

· Engineering

· Production/Manufacturing

Qualifications

· Master's in industrial engineering or project management preferred

· Has depth of understanding and ability to manage of worldwide business process. Able to adopt a business process approach in worldwide networks.

· Has depth of understanding on project management to manage worldwide projects.

· Has high business savvy to work with business partners to create win-win relationship.

· Depth of understanding business units (BU’s) direction and technical background to understand product quality.

· Ability to escalate critical issues and communicate with upper management.

· Has depth of understanding process operations matters and can give correct total priorities of yield and product qualities to direct reports.

· Has the agility to manage and execute prioritized action items from both tactical and strategic point of views.

· Can maintain good communication with business partners to create win-win relationship.

Workplace

Travel Required?

- Yes

Travel Details

Travel Frequency
Not Specified

Travel Duration
Not Specified

Travel Type
International

Environment

- Office

Shift

- 8+ hour shift, 5 days a week,

Job Hazards
Not Specified

Personal Protective Equipment
Not Specified

Equipment Use
Not Specified

Physical Requirements
Not Specified

Job Requirements:

• Degree in Information Technology or equivalent.
• Must have minimum 4-6 years of experience in Software Quality Testing with hands-on experience in Automation Testing.
• Experience with open-source automated testing frameworks such as Cucumber, TestNg and Playwright.
• Experience with open-source performance testing tools such as JMeter, Gatling, Locust or enterprise level tools such as HP LoadRunner
• Experience with open-source penetration testing tools such as ZAP, Burp Suite, SQL Map or enterprise level tools such as HP WebInspect, Nessus, CheckMarx.
• Must have strong understanding of testing techniques, risk analysis, test-driven development, continuous integration and continuous delivery.
• Must have proficiency in programming languages such as Java or Kotlin with good to have knowledge in Springboot.
• Experience working in SCRUM teams.
• Excellent written and verbal communications skills

Key Responsibilities

1. Project Management

• Plan, coordinate, and execute projects related to electrical and control systems.
• Ensure timely delivery of projects within budget and quality standards.

1. Electrical and Control Systems

• Manage the design, implementation, and optimisation of electrical and control systems.
• Oversee installation, testing, and commissioning of systems like PLC, SCADA, and DCS.
• Ensure compliance with safety and regulatory standards.

1. Collaboration

• Work with cross-functional teams, vendors, and stakeholders to achieve project goals.
• Provide regular updates on project progress and outcomes.

1. Process Optimisation

• Identify opportunities to enhance efficiency and reliability in electrical and control systems.
• Develop and document best practices.

1. Team Leadership

• Guide and mentor team members in project execution and system management.
• Foster a collaborative and innovative work environment.

_____________________________________________________________________________

Qualifications & Skills

1. Educational Background:

• Bachelor's degree in Engineering, Instrumentation, Control Systems, or a related field.

1. Experience:

• 5+ years of experience in project management, control systems, or related roles.
• Proven track record of successfully delivering control system projects on time and within budget.

1. Technical Skills:

• Hands-on experience with control systems such as PLC, SCADA, DCS, or HMI technologies.
• Knowledge of process mapping and workflow optimisation related to control systems.

1. Soft Skills:

• Excellent communication and interpersonal skills.
• Strong analytical and problem-solving abilities.
• Ability to manage multiple priorities in a fast-paced environment.