1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.
2. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
3. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
4. Ensure readiness of QC Laboratory in internal / external audits.
5. Maintain data integrity in Quality Control activities and ensure appropriate traceability.
6. Initiate change control documents.
7. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
8. Participate in New Product Introduction activities.
9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.
10. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
11. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
12. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
13. Escalate the quality events, trends as appropriate to QC Head.
14. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
15. Serve as subject matter expert on laboratory instrumentation and compliance issues.
16. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
17. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
18. Maintains a safe laboratory environment by implementing recommendations made by EHS.
19. Initiate CAPEX for equipment purchases.
20. Support in budget preparation for QC Laboratory.
21. Any other activities as and when assigned by the Superior.

EDUCATION:

Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

EXPERIENCE:

Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

1. Possess working knowledge of GMP in the pharmaceutical industry.
2. Excellent interpersonal and analytical skills, good verbal, and written communication skills.
3. Working knowledge of qualification, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
4. Working knowledge of method development, validation, verification of analytical method.
5. Familiarity of 21 CFR Part 11 requirements.

· Conduct Microbe Test & Physico-chemical Test

- Shelf life study

- Online Testing

· Prepare sensory samples for sensory tasting

· Daily calibration of laboratory equipment

· Inventory update and clearing of References and Retention samples

· Maintenance of lab equipment

· Fill up QC record forms

- Finished Product Analysis Record Form

- Raw Material Evaluation form

- Daily Sieve Physical Contamination Check & Equipment Cleaning and Sanitation Record

· Document filing

· Sample Labelling

· Data Entry into Computer System

- Incoming Record

- Microbe & Physico-chemical Record

- Inventory update

· Key in physical and microbe data

· Preparation of solutions for lab use

· Ensure the cleanliness and orderliness of the physical lab and microbe lab, and washing of lab wares.

· Any other appropriate duties and responsibilities as assigned by the Management.

The Quality Governance Lead is responsible for overseeing and ensuring the consistency, accuracy, and reliability of financial, project, and operational data across the organization. This role involves developing and managing dashboards, early alerts, and quality governance reporting, as well as driving corrective actions based on key project and financial indicators. The lead will work closely with PQE lead, Quality Leads, SBG Quality Council Leads/members, LOB leads, Delivery Lead, Client Service Leads, Client Delivery Leads, project managers, finance teams, and senior leadership to ensure quality control and mitigate risks. This role ensures that the organization maintains a proactive, data-driven approach to quality governance, driving transparency, accountability, and risk mitigation across all projects.

What will you do? 

1.    Dashboards and Early Alerts:

• PowerBI Dashboards: Develop and maintain interactive dashboards using PowerBI to track key project and financial metrics.
• Early Alerts: Establish systems for early alerts regarding critical issues such as:
  • Missing or inaccurate forecasts (ETC)
  • Manpower cost trending anomalies
  • Consistent variance between actuals and forecasts (Day 2)
  • Past fiscal year trends vs current forecasts (Day 2)
  • High unbilled revenue
  • Aging receivables and poor collection trends
  • EAC (Estimate at Completion) margin erosion and activate Watchlist
• AI Exploration: Explore and implement AI-driven models to predict potentially troubled projects and identify areas for intervention.

2.    Watchlist Management:

• Develop and manage the Watchlist for at-risk projects or financials, categorizing them into:
  • Orange (High attention needed)
  • Red (Immediate action required)
  • BRC - Projects need budget revisions
• Provide regular updates and insights to PQE lead and Global Service Lead and other stakeholders regarding projects on the Watchlist and recommend corrective actions.

3.    Quality Governance Reporting:

• Monthly Business Review (MBR): Oversee the preparation of MBR reports, delivering key insights into project status, financial performance, and emerging concerns.
• Quarterly Business Reviews (QBR): Lead the preparation of QBR reports, providing insights into project health, financial performance, and areas of concern.
• Audit and Risk Committee (ARC): Provide detailed reporting and analysis to the ARC on project and financial performance, including risk mitigation and governance practices.
• Board Reporting: Prepare concise, impactful reports for the Board, focusing on critical project and financial health indicators, trends, and risks.

1. Able to read and understand technical drawings.
2. Must able to do Mitutoyo CMM Programming and Operation.
3. Ensure incoming materials, in-process production and finished products meet by confirm specifications requirements; conducting visual and measurement tests.
4. Follow up corrective actions in production
5. Documents inspection results by completing reports and logs; inputting data into quality database.
6. Able to perform final inspection report for finished products and prepare relevant documents to customer.
7. Evaluate and analyze customers rejections, implement and feedback corrective action.

• At least 5 years' experience in Quality Control
• Basic Computer knowledge to prepare Quality Documents Report
• Able to speak, write and read simple English
• Able to work independently with minimum supervision

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At Pall Corporation, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to advance health, safety and environmentally responsible technologies. From airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper—everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. For the exponentially curious, Pall is a place where you can thrive and amplify your impact on the world. Find what drives you on a team with a more than 75-year history of discovery, determination, and innovation.

Learn about the Danaher Business System which makes everything possible.

Are you a person who enjoys making positive, tangible changes that improve the overall quality of a product or process? Do you have a passion for leading quality systems and processes? Are you customer oriented? If so, then maybe you would be a great fit for our Director Quality Director Quality Assurance - Microelectronics/APAC.

This position is part of the Quality and Regulatory Affairs department and is an onsite position.

In this role, you will have the opportunity to:

• Develop positive relationships with Key Customers, OPS team and Commercial Leaders
• Develop and implement Micro Electronics Industry leading quality systems and processes to support customer needs and expectations.
• Establish and handle QA tracking and trending of crucial performance measures (DPPM) and the preparation of periodic reports for management review.
• Implement and maintain an effective quality management system for Micro-E specific plants and aligned to corporate and BU policies, procedures, and industry specific requirements.

The essential requirements of the job include

• University Degree in mechanical/electrical or chemical engineering with a minimum of 10 years of dynamic quality assurance experience, with at least 5 years at senior level with multi-site and multi-region experience
• Thorough understanding of ISO 9001 standard. GMP knowledge and other ISO standards required.
• Fully conversant with AIAG Core tools, APQP, statistical analysis and the principles of variation reduction.

• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

Summary of Job Scope:

Responsible for technical enhancement of quality control and analytical development in QC Laboratory functions.

• Work allocation and arrangement for daily QC routine work
• Finish Product Quality Control
• Checking Report of "In-Process control of Tablet"
• In process quality control of intermediates (IPQC)
• Review and evaluation of Analyst test report and data to ensure test result is up-to date and accurate.
• Review and ensure QC Records and BMR are up-to-date, complete and accurate.
• Supervision of quality control check on raw material dispensing
• Management, Monitering and testing on sample.
• Monitor retained samples and waste of tested sample of intermediates and finished products.
• Environment monitoring and recording for retention sample room.
• Supervision and training of laboratory technicians and laboratory assistant and chemist in carrying out their duties.
• Responsibe to revise of SOP for IPQC and FPQC and relevant section.
• Verify and approve test result in absence of QC Manager.
• Calibration of laboratory equipment and apparatus.
• Ensure Good Laboratory Practice (GLP) & Lab Safety.
• Optimization of usage of laboratory equipment.
• Support in the investigation and management of product complaints.
• Participate in process and cleaning validation.

Job Descriptions:

• Management of CAPA from tracking, including follow-ups and closure.
• Management of Change Control, Deviations, from tracking, follow-ups and closure.
• Review quality process control plan, drive quality issues to root cause, corrective actions and improvements.
• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Coordinate and assists during customer visits and audits.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Review the implementation and efficiency of quality and inspection systems.
• Collect, compile statistical quality data, and analyze data to identify areas for improvement in the quality system.
• Review of analytical reports, and batch records (manufacturing and packaging).
• Perform SAP QM setting, review test results, block / unblock of finished products.
• Manage customer queries, customer satisfaction surveys, and questionnaires and other quality / regulatory purpose documentation requests.
• Investigate customer complaints and non-conformance issues.
• Consolidate data to create the annual product quality review report.
• Track quality performance and initiate quality improvement plans.
• Perform risk assessments and monitor risk management activities at quality level.
• Conduct /perform training to employees to improve GMP / international standards certification awareness and compliance.
• Perform any other duties and responsibilities as assigned from time to time.

Job Requirements:

• Minimum 2 years related work experience
• Possess experience in internal audit, validation activities, training management and batch release for API with good background on cGMP

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Quality Inspector (Jurong East)

working hours: 5 days - 8am - 5.30pm + evening/ weekend OT

base salary + OT pay + 1 month AWS + company shuttle bus (no VB)

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

Roles & Responsibilities

Job Description:

Prepare and analyze cost comparison

Obtaining quotations, liaising and negotiate with sub-contractors and suppliers

Responsible for measuring quantities and taking off

Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments

Prepare tender and contract documents, including bills of quantities with the architect and/or the client.

Undertake cost analysis for repair and maintenance project work

Assist in establishing a client’s requirements and undertake feasibility studies

Perform risk, value management, and cost control

Identify, analyze and develop responses to commercial risks

Prepare and analyze costings for tenders

Allocate work to subcontractors

Provide advice on contractual claims

Analyze outcomes and write detailed progress reports

Value completed work and arranged payments

Maintain awareness of the different building contracts in current use

Understand the implications of health and safety regulations.

All other QS related job

Job Requirements:

Degree / Diploma in Constructions Building or its equivalent

Ability in contract negotiation, contract administration & variation orders

Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines

We are offering an internship in the quality management department of the Bosch Mobility Aftermarket Asia Pacific (APAC) region based in Singapore office. Our focus is to support business and product strategies in terms of quality management for products and processes to continuously grow our automotive aftermarket business in APAC. We are looking for enthusiastic and dynamic candidates to join us for internship of 6 months.


Support our team in digitalization initiatives

• Image Classification: Assist in developing and implementing AI models for classifying customer-submitted photos to support blocked stock decision making.
• Data Collection and Preprocessing: Help gather and preprocess image data for training and validating AI models. 
• Model Training Support: Support the training of AI models using machine learning frameworks and assist in optimizing them for better performance.
• Performance Monitoring: Monitor the performance of AI models and report findings to the team for further improvements.
• Documentation: Document the processes and results of image classification tasks and contribute to project reports.
• Collaboration: Work closely with team members to ensure the AI solution aligns with project goals.

Support our team in operational tasks

• Monthly Key Performance Index updating.
• Support in maintaining related internal processes and systems.
• Support in Digitalization activities, dashboards, reporting and any other ad-hoc tasks.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description:

• Responsible for implementing all QA/QC inspection and testing, as required by specifications or by regulatory requirements and shall be familiar with all aspects of testing required for commercial building including the quality testing requirements of local Authorities such as the Standards, Productivity and Innovation Board (SPRING Singapore)
• Monitor progress and quality of all C&S, Archi, M&E and security system works, including CONQUAS, Green Mark etc to ensure compliance to project and statutory requirements
• Review procedures to improve productivity.
• Attends meetings with client, authorities, subcontractors and consultants.
• Ad-hoc duties as assigned

Requirements (Qualification & Experience):

• Preferably university graduate in Electrical/Security/Computer Engineering or IT recognised by PEB Singapore.
• Ten (10) years of relevant experience in the implementation and management of quality control systems
• Familiar with BIM for construction, Green Mark, CONQUAS and relevant authority requirements
• Full time stationed on site during construction

Manager Job Responsibilities:

Accomplishes department objectives by managing staff; planning and evaluating department activities.

Maintains staff by recruiting, selecting, orienting, and training employees.

Ensures a safe, secure, and legal work environment.

Develops personal growth opportunities.

Accomplishes staff results by communicating job expectations; planning, monitoring, and appraising job results.

Coaches, counsels, and disciplines employees.

Develops, coordinates, and enforces systems, policies, procedures, and productivity standards.

Establishes strategic goals by gathering pertinent business, financial, service, and operations information.

Defines objectives, identifies and evaluates trends and options, chooses a course of action, and evaluates outcomes.

Accomplishes financial objectives by forecasting requirements, preparing an annual budget, scheduling expenditures, analyzing variances, and initiating corrective actions.

Maintains quality service by enforcing quality and customer service standards, analyzing and resolving quality and customer service problems, and recommending system improvements.

Contributes to team effort by accomplishing related results as needed.

Manager Qualifications / Skills:

Performance management

Project management

Coaching

Supervision

Quality management

Results driven

Developing budgets

Developing standards

Foster teamwork

Handles pressure

Giving feedback

Manager Job Responsibilities:

Accomplishes department objectives by managing staff; planning and evaluating department activities.

Maintains staff by recruiting, selecting, orienting, and training employees.

Ensures a safe, secure, and legal work environment.

Develops personal growth opportunities.

Accomplishes staff results by communicating job expectations; planning, monitoring, and appraising job results.

Coaches, counsels, and disciplines employees.

Develops, coordinates, and enforces systems, policies, procedures, and productivity standards.

Establishes strategic goals by gathering pertinent business, financial, service, and operations information.

Defines objectives, identifies and evaluates trends and options, chooses a course of action, and evaluates outcomes.

Accomplishes financial objectives by forecasting requirements, preparing an annual budget, scheduling expenditures, analyzing variances, and initiating corrective actions.

Maintains quality service by enforcing quality and customer service standards, analyzing and resolving quality and customer service problems, and recommending system improvements.

Contributes to team effort by accomplishing related results as needed.

Manager Qualifications / Skills:

Performance management

Project management

Coaching

Supervision

Quality management

Results driven

Developing budgets

Developing standards

Foster teamwork

Handles pressure

Giving feedback