Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Responsibilities:

• Oversee the overall product redressing/ repackaging operations
• Oversee incoming of goods for redressing/ repackaging processes
• Planning of work schedule and overtime if required
• Preparation of Production Batch Records, print labels
• Ensure compliance to SOP/WI and other GxP requirements
• Ensure documents are well maintained and updated
• Prepare CAPA report and recommendations
• Assist in verifying and releasing of finished goods
• Ad hoc duties as assigned

Requirement:

• Bachelor or Diploma in Pharmaceutical Studies or equivalent
• With 1 - 2 years of quality assurance/ control (QA/ QC) experience from healthcare/ pharmaceutical industry
• Candidates with prior Pharmacist background are also welcomed to apply

Interested candidates who wish to apply for the advertised position, please send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R24120209

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

• Enforce an effective QA program, which follows the guidelines of the company QA Manuals, processes, and customer requirements.

• Report periodically direct to Management on performance relating to quality processes, within the projects and the shipyard

• Managing and planning the inspection activities in production, and resource planning for carrying out QA and QC activities, including NDT, Welding inspections; inspection test procedures.

• Monitoring the quality standards of yard and contractors; and the main liaison throughout projects in terms of quality, for both internal and external parties

• To identify and analyze any quality procedural or product issues, and providing corrective action plans for parties to work on

• Acting as the main champion for continuous improvement, and spearheading process improvements within the organization

• Keeping track on the quality standards in the shipyard, and ensure compliance and preparedness for internal and external audits

• Improving quality assurance processes and practices. Involved in the recruitment and mentoring of QA Engineers.

• Overseeing and coordinating the investigation of Customer Complaints and Non-conformities.

• Interfaces with customer representatives in matters pertaining to quality for assigned tasks

• Prepare product and process quality reports by collecting, analyzing, and summarizing information and trends

• Develop and report on Quality Key Performance Indicators

• Liaise with the customer and classification societies on all quality issues

• Ensure the implementation of project Quality Plans

• Review contract documentation/specifications/quality plans to identify the quality requirements and documentation deliverables.

• Conduct any quality hold points/inspections/tests or other customer nominated activities.

• Carry out materials inspections and verify segregation and traceability of materials

• Carry out welding inspections at all stages of the process

• Fit-Up Inspection (Including surveillance of pre-heat requirements)

• In-Process Welding Inspection

• Finial Visual Inspection of Completed Welds

• Witness Production verification activities (Dimensional Inspection, FAT's etc.)

• Carry out sub-contract surveillance activities where required

• Co-ordinate Customer/3rd party inspections.

• Control, populate and sign-off Welding Logs as the works progress

• Ensure the approved project Inspection & Test Plans are adhered too, signed off, and verification documentation is available at the appropriate stages of the manufacture, inspection and test process.

Position Summary:

The Quality Control Engineer is an experienced engineer with a good understanding of construction principles, standards and processes. The QC Engineer is responsible to identify the measures and controls required to give a reasonably practical assurance that the quality of the works will be achieved.

The QC Engineer will have a detailed understanding of the project specifications and legal/contract/company quality requirements.

This QC Engineer will be involved in reviewing method statements and preparing inspection and test plans. They will also train and advise project staff on quality matters, monitor the progress of submissions, inspections and tests. They will coordinate the management of defects and nonconformances.

Note: The QC Engineer does is not responsible to undertake frontline inspections or tests, they are there to support the Site Engineers and ensure the Quality Control systems is functioning effectively.

Responsibilities:

•Study and understand legal and contractual requirements for the works including specification

•Study and understand standards and in-house requirements

•Develop inspection & test plans and records systems, and work procedures

•Review method statements, and confirm they are being followed

•Train and advise project personnel on the QC system;

•Monitor the QC activities of site engineers/supervisors, and review quality records

•Report on the QC status of the works, maintain QC filing, make QC submissions to Client

•Coordinate the reporting and resolution of non-conforming works

Skill:

•Excellent technical knowledge of construction methods, quality controls, risks to quality and acceptance criteria

•Well organised/effective administrator

•Able to work in a team and communicate effectively while also being strongly independent and able to challenge non-compliance.

•Computer literate / digital tool literate

Requirement :

Singaporean only

University Degree in Civil or Structural Engineering (or equivalent)

Engineer: 4 years + experience in on-site construction works

Roles and Responsibilities (Software Quality Engineer)

1. Assist Product Owner, Business Analyst to craft out user story acceptance criteria
2. Analyse and decompose complicated software systems, and design a holistic test strategy
3. Conduct research on emerging technologies and develop test automation framework
4. Develop test suites of test scenarios and test cases
5. Take a risk-based approach for test automation
6. Perform time boxed exploratory testing
7. Maintain regression test suite in QA nightly build
8. Actively refine smoke test suite in Development CI environment
9. Lead system integration testing with other systems
10. Manage user acceptance testing
11. Manage defect life cycle, test artefacts and repository
12. Drive continuous improvement in agile testing practices and tools
13. Take on secondary role as low code application development engineer or Security Ops Engineer
14. Improve software quality using XP practices such as code review and unit testing
15. Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guideline

Requirement

1. Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.
2. Min 3 years experience in exploratory testing and regression test automation
3. Strong analytical skills
4. Meticulous attention to details
5. Good interpersonal skills such as tactfulness
6. Good presentation and listening skills
7. Experience in agile development environment will be an added advantage
8. Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter) or EggPlant or Pega Unit Test will be an added advantage
9. Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

✔ Good Career Starter !!!

✔ Our Client is one of the Leading Data Management Company

✔ Till End of December

Working location:

Quality Road

Working hours:

Mon-Fri 830am-6pm

Responsibilities:

• Scanning and filing of documents in a fast-paced environment.
• Perform data entry duties by ensuring all data are keyed in correctly into database.
• Any other ad-hoc duties assigned.

Requirements:

• At least GCE ‘N’ Level qualification is needed.
• Able to Start Immediately

How to Apply:

Please prepare your updted resume (Include your current salary and expected salary) and email to [email protected] or Whatsapp +65 8512 8044

We regret only shortlisted candidates will be notified.

EA License No: 05C3451
EA Personnel Reg No: R2198644
Ellen Lee Wei Xin

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Quality Assurance (QA)

• Working days: 5 / 6 days alternate
• Working Hours: 830am-530pm
• Salary: $2000 - $2400
• Working Location : Bedok

Job responsibilities

• Conduct detailed inspections of finished products to identify defects, non-conformities, and deviations from quality standards.
• Support quality in handling defective found during the production
• Collaborate with the quality control team to resolve material quality issues and determine disposition (accept, reject, or rework)
• Collaborate with the production, quality teams to identify root causes of defects and non-conformities
• Perform FA report, and propose process improvements.
• able to use calliper, OGP , Keyence, Drop gauge , micrometre, pin gauge
• able to interpret 2D drawings
• ⁠collect parts for 2 hourly to visual inspection
• ⁠key in data

Ho Ming Jie (Edmund) Reg No: R1987094

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Lab Technician (Quality Control/ LIMS/ Contract/ Entry Level)

Location: Benoi

Salary up to $3300

1-year contract (Renewable)

Main Functions:

• Support/assist the lab supervisors/chemists by performing routine and non-routine laboratory analysis/wet chemistry on product and in-process samples, to support plant operations for the purpose of quality assurance/control.
• Perform calibration and maintenance of test equipment.
• Prepare samples and ensure accurate data generation and records, in accordance with the standard operating procedures.
• Utilize analytical instruments to address quality assurance/control issues.
• Prepare chemical stock solutions and reagents, as well as set preparation standards. Position will receive direction and support.

Responsibilities :

• Responsible for performing laboratory analysis necessary for the completion of projects typically under the direction of Group Lead and/or in consultation with the Technical Advisor(s)
• Responsible for adhering to and managing quality control programs. This includes maintaining documentation of their experimental results and equipment maintenance and calibration whenever assigned by Group Lead
• Responsible for customer sample distribution process and associated activities to meet agreed turnaround time
• Periodic review and update lab quality and controls documents/procedures
• Responsible for Laboratory Information Management System (LIMS) setup for new and existing equipment
• Responsible for performing laboratory analysis necessary for the completion of projects typically under the direction of Group Lead and/or in consultation with the Technical Advisor(s) whenever assigned by Group Lead
• Support Group/Program Lead in defining strategies, experimental plan and scope of project. This includes defining test execution details such as coordination of support services (analytical, mechanical, electrical, instrumentation, purchasing, etc.)
• The Technician may lead smaller technical support projects in their area of expertise. Technician generally plan one’s own work activities to meet defined project objectives and timetables.

Requirements:

• Diploma with background in Chemical/Process/Technical Engineering.
• Experience in quality control systems.

Apple Lim Pey Chyi - [email protected]

Personnel Reg No: R2090579

EA Licence No: 02C3423

This is a 12-months contract position as a Quality Assurance Lead, Cloud.

Job Descriptions:

• Lead and mentor a team of test engineers;
• Develop and implement automated testing strategies and frameworks;
• Coordinate with development, QA, and product teams for product quality;
• Manage project timelines, deliverables, and resources;
• Design, develop, and maintain automated test scripts;
• Continuously improve automation testing to enhance coverage and reduce cycle times;
• Ensure products meet high-quality standards before release;
• Develop and maintain test plans, cases, and data;
• Perform root cause analysis and work with development teams on issue resolution;
• Stay updated on technology trends and enhance team processes and methodologies.

Job Requirements:

• Bachelor's/Master’s degree in Computer Science, Engineering, or equivalent;
• Experience leading and managing testing teams;
• Strong analytical and logical thinking skills;
• Proficient in core Java, Spring framework;
• Proficient in MySQL, familiar with NoSQL databases;
• Knowledgeable in distributed system design and messaging middleware;
• Expertise in automation tools (e.g., Selenium, Appium, JUnit, TestNG);
• Ability to work under stress and quickly learn new concepts;
• Strong cross-team communication skills.

We regret to inform that only shortlisted candidates will be contacted.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

Job Descriptions:

• Lead and mentor a team of test engineers;
• Develop and implement automated testing strategies and frameworks;
• Coordinate with development, QA, and product teams for product quality;
• Manage project timelines, deliverables, and resources;
• Design, develop, and maintain automated test scripts;
• Continuously improve automation testing to enhance coverage and reduce cycle times;
• Ensure products meet high-quality standards before release;
• Develop and maintain test plans, cases, and data;
• Perform root cause analysis and work with development teams on issue resolution;
• Stay updated on technology trends and enhance team processes and methodologies.

Job Requirements:

• Bachelor's/Master’s degree in Computer Science, Engineering, or equivalent;
• Experience leading and managing testing teams;
• Strong analytical and logical thinking skills;
• Proficient in core Java, Spring framework;
• Proficient in MySQL, familiar with NoSQL databases;
• Knowledgeable in distributed system design and messaging middleware;
• Expertise in automation tools (e.g., Selenium, Appium, JUnit, TestNG);
• Ability to work under stress and quickly learn new concepts;
• Strong cross-team communication skills.

We regret to inform that only shortlisted candidates will be contacted.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Inspector II you are tasked to assist in customer complaint investigation process and provide quality oversight for the site to ensure that devices manufactured are compliant to ISO 13485, MDSAP, EU MDR, Alcon Standards and Policies, and regulatory requirement.

Responsibilities

• Support complaint investigation via following up on required actions (DHR/logbook/PM review, etc).•Identify improvement opportunities and lead/support the implementation activities to improve performance and efficiency.•Meet quality objectives set by management & comply to Alcon, QMS and Safety requirements.•Complete Complaint investigation report and maintenance of complaint master list, complaint samples, SOP revision and periodic review.•Perform Site's investigation (NCR, SAR, OOS, Complaints, etc) and Site's WI/SOP/Gap Assessment/Impact Assessment.•Work with cross-functional teams to resolve operational quality issues.•Performs any other duties as assigned by Supervisor according to business needs.

What You'll Bring to Alcon

• Min GCE N/O Levels/ Nitec in any engineering field
• Preperably 1-2 years of experience in quality inspection in manufacturing sector
• Able to commit to rotating day and overnight shift/ day shift

Why Join Us:

• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.

Responsibilities

• Support the site projects on Qualification/ Validation
• Responsible to review and approve the Quality Control related (Analytical Instrument Qualification, Analytical and Microbiology Method Validation, Critical Reagent Qualification) protocols, reports, procedures and other related documents to ensure compliance to internal procedures and regulatory requirements.
• Evaluate and approve discrepancy related to qualification/validation protocols in order to guarantee documentation of the incidents and identification of corrective actions.
• Support collaboration and participations in projects as Quality Representative for Quality Systems and Validation.
• Provide validation expertise, oversight and support for the development (or modification phases) of Analytical Instrument Qualification, Analytical and Microbiology Method Validation, Critical Reagent Qualification.
• Ensuring the information contained in approved qualification/validation document(s) is understandable and defendable during inspection.
• Provide quality oversight on the Quality Control validation maintenance activities and Master Validation Plan.
• Support in multisite initiatives to ensure harmonization of Quality Systems and qualification/validation related activities between the plants.
• Build strong partnership with all other departments to ensure open communications and acceptance
• Responsibility to adhere to any applicable EHS requirements.
• Commitment to a fair and respectful relationship to others and behavior in accordance with Shire’s Code of Conduct.
• Any other duties as assigned by Manager/ Supervisor.

Education and Experience Requirements

• The candidate should have at least have a degree in pharmaceutical sciences, life sciences, biology, biotechnology chemistry, chemical engineering, engineering or a related discipline. Additional certification and trainings such as Certified Quality Engineer or specific Validation topics will be advantages.
• A minimum experience of 2-3 years in the pharmaceutical or biotechnology in quality assurance, manufacturing operations or validation, ideally in a multinational company. Hands-on experience with hands-on experience in performing equipment, process, cleaning, computer systems & shipping validation will be advantages.
• FDA/EU cGMP validation requirements/expectations (eg. CFR 21 part 11, PAT) and a thorough understanding of ICH guidelines and the various validation guides such as PDA Technical guides, ISPE GAMP guides etc.
• Able to logically solve problems in order to find timely solutions.
• An ability to interact and communicate with all types of personalities in an effective and diplomatic manner.

Apply now by sending your resume to: [email protected]

We regret to inform that only shortlisted candidates will be notified.

Ashley Loo Yan Ni | R2095115 | EA License Number: 99C4599

Recruit Express Pte Ltd Company Reg. No. 199601303W

We seek an Automation Quality Assurance Engineer skilled in software testing to play a key role in the product development process and deliver high-quality software solutions that meet the clients' needs.

• Competitive remuneration package (up to $4,500 + AWS + VB).
• Hybrid working arrangement.
• Gain valuable skills in software testing methodologies with opportunities for professional development and career progression in QA.

Responsibilities:

• Design, develop, and sustain automation frameworks for testing software and hardware, process automation, and data integration.
• Develop comprehensive test cases and plans while maintaining scalable automation frameworks to support continuous integration and delivery.
• Run automated tests, evaluate results, and identify defects, performance concerns, and areas for enhancement.
• Integrate automated tests within CI/CD pipelines.
• Identify opportunities for automation to boost efficiency and minimize manual efforts.
• Document automation workflows, test cases, and outcomes for future reference and audit purposes.
• Assist with manual testing as required and handle other assigned responsibilities.

Job Requirements:

• Singaporean only.
• Minimum of 3 years experience in Software testing (Web-based application).
• Strong proficiency in automation development using Python / Selenium / Appium.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Prior experience in creating clear and concise test plans and test cases.
• Prior hands-on experience with API automation, test automation, and integrating it into CI/CD pipelines.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Our client is a global manufacturer. Due to business needs, they are now recruiting a Customer Quality Engineer to be part of their Quality team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility of Customer Quality Engineer:

• Analyze and apply customer quality specifications, developing and upholding internal quality benchmarks through APQP methodologies (e.g., Process Flow Diagram, Control Plan).
• Facilitate Built-in Quality workshops, ensuring collaboration with cross-functional teams to achieve and monitor continuous improvements through to completion.
• Lead initiatives to resolve quality issues for new programs (such as Process of Record, Process Change Request, First Time Quality) to enhance performance.
• Chair Material Review Board meetings to address deviations and spearhead corrective actions for non-conformance cases.
• Obtain customer approval for Production Parts and provide support for the initial stages of production.
• Promptly address customer returns by utilizing Six Sigma problem-solving techniques and the 8D approach.
• Capture and document lessons learned for each new program and apply these insights to future projects.
• Ensure adherence to the Quality Operating System throughout product launches.

Requirements:

• Min Degree in Engineering related field
• Minimum 3 experience in Quality and Product Launch
• Knowledge in Automotive industry regulations and standards

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Description:

• In Charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all related government agencies, aviation authorities and customers’ requirements and regulations
• Taking charge liaising with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In Charge of reviewing and revising quality procedures and quality control instructions and performing of internal audits to evaluate quality system, products, and processes

Job Requirement:

• Minimum Degree in Mechanical Engineering or relevant
• Minimum 2 years’ relevant experience in aerospace manufacturing and experience in leading and using problem-solving tools
• Experience in heat treatment, non-conventional machining, shotpeening and chemical processing would be an advantage

Job Description & Requirements

1. Managing chinese medication stock levels.

2. scheduling work schedule for employees

3. Ensuring that all procured items meet quality standards and regulatory requirements.

4. Analyzing costs and implementing costsaving strategies without compromising product quality

5. Identifying and selecting reliable suppliers for traditional Chinese medicine ingredients, equipment, and supplies.

6. Support the store operations

7. Handle other ad-hoc job delegated by superior

Job requirement:

- Possess at least a Bachelor Degree certificate

- At least 10 years total working experiences

- At least 5 years in the relevant working experiences

- Able to work retail hour

- Able to work on weekend

Manager Job Responsibilities:

Accomplishes department objectives by managing staff; planning and evaluating department activities.

Maintains staff by recruiting, selecting, orienting, and training employees.

Ensures a safe, secure, and legal work environment.

Develops personal growth opportunities.

Accomplishes staff results by communicating job expectations; planning, monitoring, and appraising job results.

Coaches, counsels, and disciplines employees.

Develops, coordinates, and enforces systems, policies, procedures, and productivity standards.

Establishes strategic goals by gathering pertinent business, financial, service, and operations information.

Defines objectives, identifies and evaluates trends and options, chooses a course of action, and evaluates outcomes.

Accomplishes financial objectives by forecasting requirements, preparing an annual budget, scheduling expenditures, analyzing variances, and initiating corrective actions.

Maintains quality service by enforcing quality and customer service standards, analyzing and resolving quality and customer service problems, and recommending system improvements.

Contributes to team effort by accomplishing related results as needed.

Manager Qualifications / Skills:

Performance management

Project management

Coaching

Supervision

Quality management

Results driven

Developing budgets

Developing standards

Foster teamwork

Handles pressure

Giving feedback

• The Manager is responsible for all aspects of assigned outlet operations as well as financial performance.
• Ensures that all duties are carried out to serve all Customers to full satisfaction, including preparation of the outlet for services and maintaining the outlet in a clean and tidy condition
• Sales oriented and ability to lead team to achieve sales targets
• Display initiative, leadership qualities and ability to motivate oneself and team
• Builds relationships with regular guests together with the Restaurant Managers and understands their requirements and establish and maintain active interaction with all guests to ensure total satisfaction
• Coordinate all Reservations to ensure optimum capacity
• Must be able to take full ownership and responsibility of the assigned outlet and ensure smooth service flow with the team

all hair services like cut, dying hair, doing hair treatments, selling hair products, order stocks for hair products, cashiering, handle calls from customers, train and manage Staffs, help to boost sales, handle complaints from customers. help to wash towels and fold them, open and close the cashier.