• Handle mailbox survey submissions, feedback, and requests from survey respondents within stipulated turnaround time.
• Ensure consistent and detail cases notes updated in system after each liaison with respondents.
• Responsible for inter-department liaison for correct assignment of respondents to the parties responsible.
• Ensure prompt follow-up for survey cases under pending status.
• Provides accurate daily report on mailboxes activities for the day to relevant stakeholders.
• Ensuring all potential/actual complains are acted upon within stipulate timeline.

Requirements:

• Singaporean
• At least Diploma or above
• At least 2 years of relevant customer service, call audit and emailing experience

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. https://go.persolkelly.com/job/apply/5789

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries. Suzana Binte Slemat (EAP No. R1989461) EA Licence No. 01C4394

Department Head , Quality Assurance

Job Descriptions

· To lead and manage a team on quality assurance in a fast pace semi-conductor industries.

· To take ownership for technical transfer from Head Office (Japan), new products testing; as well as assisting customers during material evaluation and qualification phases, and provide solutions on technical and quality matters on the products.

· To work closely with Head Office (Japan), including Global Quality Assurance, R&D team, Manufacturing team, Engineering Team, Sales/Marketing and Supplier Chain team in achieving towards customer satisfaction.

1. To work closely, especially with Japanese group customers (necessary to communicate in local Language), in the establishment of suitable material configurations and specification, to meet their expectations and requirements and providing technical support as necessary.
2. To conduct experimental research on properties on products, as well as in-depth failure analysis and testing to facilitate root cause investigation for total improvement

Job Requirement:

- Degree / master in Polymer / Material engineering / Applied Chemistry / Engineering

- Minimum 15 years of relevant work experience in semiconductor industries (with at least 5 years in managerial position), and must be familiar with characteristic of epoxy molding compound for IC encapsulation, epoxy glue for die attachment, lid attachment, sealing.

- Requires detailed knowledge about ;

1) Reliability requirement for power device, automotive semiconductor.

2) Composite material between organic and inorganic.

3) Organic synthesis and adhesion between polymers and metals.

4) Polymer production process especially for Epoxy and Phenolic resin.

5) Metal property especially for silver

6) Rheology for paste material

7) Below equipments:

o DCS (Different Scanning Calorimetry)

o DMA (Dynamic Mechanical Analysis)

o TMA (Thermo-Mechanical Analysis)

o TGA (Thermogravimetric Analysis)

o Viscometer

o Rheometer

o GPC (Gel Permation Chromatography)

o SEM (Scanning Electron Microscope)

o Printing Machine

o Dispensing Machine

o Die Bonding Machine

o Wire Bonding Machine

- Familiar with Japanese Patent system

- Familiar with materials and custom regulations in respective countries, such as Japan (Japan (CSCL) , USA (TSCA), EU (EINECS,REACH), Korea (ECL) , Philippines (PICCSS), China (IECSC), Taiwan(ECN).

- Industrial experiences in failure analysis (FA or polymer science and semiconductor material composition) is necessary).

Job description:
• Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications.
• Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.
• Maintain the control of the manufacturing environment and perform gowning as necessary.
• Perform recording of inspection data, monitoring data and other data in accordance to Records Control requirements.
• Perform other tasks as assigned by the supervisor.
• Work experience as an quality inspector.

Candidate Profile & Requirements:
• Candidate must possess at least a Secondary School/"O" Level, Higher secondary/PreU/A level/College,Professional Certificate/NiTEC, any field.
• At least 2 years of work experience as inspector in a machine shop.
• Proficient in regular measurement instruments. Capable of operating CMM is an advantage.
• Able to read and understand engineering drawings and GD&T.
• Good interpersonal skills; organized; self discipline.

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

• Perform rigorous quality checks and controls to ensure food products are safe and compliant with health and safety standards.
• Testing food samples in both Chemistry and Microbiology
• Work closely with team members and suppliers including QA, FoodTech, Engineers and relevant teams to enhance product quality and safety.
• Conduct sampling, food audits and inspection at suppliers’ sites according to company guidelines and checklists.
• Prepare reports and follow up on action plans arising from audits or inspections.
• Stay updated on the latest trends and scientific advancements in food technology and nutrition.
• Evaluate and verify product compliance against set specifications, including nutritional content, appearance, taste, texture, odor, colour standards etc.
• Perform ad-hoc tasks as assigned.

Job Requirements:

• Bachelor’s degree in Food Science and Technology, Food Nutrition, or a related field.
• Strong understanding of food and laboratory testing, including Chemistry and Microbiology.
• Knowledge of Halal, Kosher, HACCP, FSSC, and ISO procedures is an advantage.
• Preferably 2 years of relevant working experience.
• Strong communication skills for interacting with cross-functional teams, vendors, and potentially clients.

Other Information:

• This is a contract position for up to 6 months, with the possibility of extension.
• Working Hours: 8:30 AM to 6:00 PM, Monday to Friday.
• Work Location: Joo Koon.

Job Description:

• Responsible for product quality assurance.
• Completes all administrative activities associated with quality inspection.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Downloads quality information from quality system to be used for Quality reports.
• Plans and directs activities concerned with the establishment and/or continuance of process related requirements and other quality programs.
• Prepares quality documentation or equivalent.
• Prepares Statistical Process Control Charts where required.
• Responsible for authorizing the released of final products to customer.
• Supervises inspectors or technicians on the inspection plan.
• Directs inspectors or technicians engaged in measuring, inspecting and/or testing products or parts and tabulating data.
• concerning materials, product or process quality and reliability.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering
• to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets
• through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Job Requirements :

• Diploma / ITC / NTC in Mechatronics/ Electrical & Electronics engineering or related discipline, preferably with 2 years in manufacturing environment.
• Proficiency in written and communication skills in English.
• Practical computer skills and knowledge with hands-on ability.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Able to use microscope for inspection and verification.

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has setup their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Main Purpose of Job:

This new position is responsible for performing production-related inspection jobs, carrying out equipment and calibration, and maintaining documentation and records.

Key Duties & Responsibilities:

· Prepare the lab for ISO 9001:2015 certification audits, including laboratory equipment qualification and method validation.

· Responsible for manufacturing management and quality control (QC) based on the quality assurance system (QAS)

· Design and develop forms, work instructions and methods for testing and evaluation.

· Utilizing knowledge in engineering fields for chemical and product quality inspection.

· Ensure lab equipment/instrument calibration and maintenance are maintained as planned.

· Trend and feedback of monitoring data to relevant sections and drive for investigation and action as necessary.

· Chemical Analysis of products using ICP, X-ray diffractometer, HPLC, FTIR, particle size analyser, UV, Endotoxin test and chloride, sulfate, carbonate limit test.

· Carry out TOC, Endotoxin test, and environmental monitoring tests.

· Carry out maintenance and calibration of equipment. Maintain accurate inspection, maintenance, and calibration of records.

· Perform investigation when the test is out-of-spec or abnormal.

· Prepare validation documents and carry out the qualification of equipment etc.

· Cross function collaboration to achieve compliance with quality requirements, improvements, development and implementation of new products /processes, supporting customer complaints, etc.

· Process explanation and audit support in customer audit

· Corrective and preventive action (CAPA) support

· Perform all other duties assigned by the supervisor or manager.

Education:

Diploma in a scientific discipline or possess equivalent experience or higher.

Experience:

· Five years’ experience in a medical device or pharmaceutical laboratory environment

· Have experience with lab equipment such as HPLC, ICP, FT-IR, UV Spectrometer and environmental monitoring sample testing.

· Familiar with ISO 9001:2015 requirements.

Proficient in Microsoft Word and Excel

Working Conditions:

Work is generally performed within an indoor laboratory environment with adequate temperature. Personal protective equipment (PPE), such as a Laboratory coat, Safety shoes, Appropriate gloves, hearing protection, Respiratory Protection etc., will be required for potential exposure to hazardous chemicals and noise hazards.

Job Description:

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements:

• Minimum Diploma or Degree in Chemistry, Food Science and Technology, Analytical Chemistry or equivalent in years of similar experience.

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

i. Monitor/manage feedback from multiple feedback channels (e.g.calls to contact centre, emails to public facing inboxes, as well as other digital and traditional platforms);

ii. Monitor and manage Authority’s contact centre;

iii. Manage and enhance Authority’s Customer Management System (CMS) by working closely with system vendor on the deployment of system enhancements by stipulated timeline;

iv. For cases handled by SQO, ensure that final replies are issued to feedback providers within the service timelines (See ANNEX C);

v. Respond to requests from operation divisions for vetting of replies within one working day;

vi. Submit monthly data analytics report on NParks and AVS overall case management performance for current month by the end of the next month;

vii. Implement any other Service improvement initiatives when assigned

Monday to Friday - 8.30 AM to 6.00 PM

Working location : 1 Cluny Road , Singapore 259569

Job Requirement :

Degree in mass communications, marketing, or related discipline;

(b) At least 3 years’ relevant experience in customer service management, call centre management or quality service management;

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Responsible for inspection of parts and products and ensuring that they comply with the set standards and specifications
• Ensure that all inspection check sheets are duly completed
• Ensure that non-conformance parts and products are not released to the customers
• Ensure that defects are corrected before releasing them to Production
• Ensure that corrective or preventive action are in place and sustained
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job Requirements:

• Minimum NTC2/3, ITC in Mechanical/Mechatronics/Precision Engineering
• At least 1 year of experience in quality control and related work
• At least 1 year of experience in the operation of CNC machines
• Basic knowledge of Microsoft Office tools: Excel, Word, PowerPoint

Job Scope:

• Develop and implement quality control procedures and policies
• Conduct inspections and audits to ensure compliance with quality standards
• Monitor and test materials, products, and processes to verify quality
• Identify and resolve quality issues and non-conformance
• Review project specifications, drawings, and standards for quality requirements
• Prepare quality reports and document test results and inspections
• Coordinate with suppliers and subcontractors to ensure quality requirements are met
• Perform root cause analysis for quality failures and implement corrective actions
• Ensure that safety and environmental standards are followed during inspections
• Train and mentor staff on quality control processes and best practices
• Maintain records of quality inspections, certifications, and test results
• Support project managers in quality planning and control
• Ensure continuous improvement in quality processes and systems

Requirements:

• Engineering degree
• 5+ years of QA/QC experience in construction
• Experience in structural steel or precast RC works
• Strong interpersonal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Functional and Automation testing experience including tools such as Selenium, UFT, JIRA, Postman

• Bachelor's Degree in software engineering, computer engineering, electrical engineering or infocomm-related discipline

• Must have professional software quality testing experience with hands-on automation

• Strong understanding of testing techniques, risk analysis

• Strong understanding of test-driven development, continuous integration and continuous delivery

• Experience with automation scripting (i.e. Python and shell scripts)

• Experience with open-source automated testing frameworks (i.e. RobotFramework, Selenium Webdriver)

• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)

• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)

• Working experience in Agile environment will be an added advantage

• Excellent verbal communication and listening skills

• Proactive, self-driven and motivated

We are looking for a Software Quality Assurance Analyst who are passionate about improving the quality of the services. The QA will be part of an in-house team tasked with developing and maintaining the system.

Responsibilities:

• Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
• Create, maintain and improve the automated test framework and test environments
• Conduct testing on new features and file defects
• Perform various tests such as manual/functional/performance/exploratory tests support UATs
• Assist in resolving production cases
• Participate in all agile ceremonies

Requirements:

• Degree in software engineering, computer engineering, electrical engineering or Infocomms-related discipline.
• At least 3 years of professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Experience with various testing tools will be an added advantage:
• Experience with open-source automated testing frameworks (i.e. Robot, Appium, Selenium) or Enterprise level testing tools (e.g. HP Mobile Center, HP UFT, HP QC, Sprinter)
• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage
• Excellent verbal communication and listening skills
• Proactive, self-driven and motivated

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24005

What will you do?

We adopt an Agile development approach and work towards tech best practices and cutting-edge tools.

We are looking for software quality engineers who are passionate about improving the quality of the Government services provide. You will be part of an in-house team tasked with developing and maintaining the citizen disbursement system.

• Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
• Performance/security testing
• Familiar with Java
• Create, maintain, and improve the automated test framework and test environments.
• Conduct testing on new features and file defects.
• Perform various tests such as manual/functional/performance/exploratory tests support UATs.
• Assist in resolving production cases.
• Participate in all agile ceremonies.
• Leadership experience

What are we looking for?

• Degree in software engineering, computer engineering, electrical engineering, or infocomm-related discipline.
• At least 3 years of professional software quality testing experience with hands-on automation
• Experience in Python
• Experience in performing API Testing
• Strong understanding of testing techniques
• Strong understanding of test-driven development, continuous integration, and continuous delivery
• Experience with open-source automated testing frameworks (Robot, Appium, Selenium)
• Enterprise level testing tools (HP Mobile Center, HP UFT, HP QC, Sprinter)
• Experience with open-source performance testing tools (JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage.
• Excellent verbal communication skills
• Proactive, self-driven and self-motivated

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Responsibilities

• Responsible for internal and external excursion management (MRB or Quality Claims)
• In-charge of customer data reporting
• Conduct quality related training
• Support customer survey and audits
• Responsible for continuous improvement activities
• Other Adhoc duties assigned

Requirements

• Degree in Engineering or Science
• Min. 2 years relevant working experience is required
• Systematic and analytical problem-solving skills
• Proactive and Multi-tasking
• Good communication skills and a good team player
• Proficient in Microsoft Office
• Good working knowledge in Statistical Process Control (SPC) and Statistical techniques is preferably
• Auditing experience is an added advantage
• Understanding of system flow and database is an added advantage

• 1 year renewable
• Central area - Clarke Quay
• Monday - Friday, office hours
• Handle mailbox survey submissions, feedback, and requests from survey respondents within stipulated turnaround time.
• Ensure consistent and detail cases notes updated in system after each liaison with respondents.
• Responsible for inter-department liaison for correct assignment of respondents to the parties responsible.
• Ensure prompt follow-up for survey cases under pending status.
• Provides accurate daily report on mailboxes activities for the day to relevant stakeholders.
• Ensuring all potential/actual complains are acted upon within stipulate timeline.

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. https://go.persolkelly.com/job/apply/5789

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries. Suzana Binte Slemat (EAP No. R1989461) EA Licence No. 01C4394

Microbiology and Biochemical Product Testing:

• Perform EM such as active air sampling, surface and passive air samplings, plate readings and inspection of cleaned facility and sterilised equipment
• Responsible for planning,monitoring and approving microbiological testing
• Perform method Qualification,validation and product testing (e.g. sterility and endoxin) to support QC lot release.
• Perform stability testing of released final products as per protocol and timelines.
• Support assessment of certification/accreditation and services provided by external labs for QC testing.
• Knowledge in biochemical testing, including cell counts, flow cytometry, ELISA, PCR analysis, and compendial testing (pH, Appearance) as per USP, JP, and EP standards

Documents, Records and Data Management:

• Drafting and updating of Standard Operation Procedures (SOPs) and specification documents for EM, equipment, sampling plan, test methods, final products and raw/packaging materials.
• Author and review technical protocols and reports (e.g. EM risk analysis), develop guidelines and standard practices for data documentation, analysis and training.
• Review test results, document data and produce trends (e.g. EM) in an efficient, organised and presentable manner to facilitate discussions, support business and performance metrics reporting.

Deviations, Change Control and Audits Management:

• Support deviations (e.g. test OOS, EM excursion) initiation, investigations and root cause analysis for product defects and quality lapses.
• Support change control and CAPA implementation.
• Support internal and external audits/inspections.

Equipment and Lab Management:

• New equipement commisihing support( Operational qualification-OQ, Performance qualification- PQ
• Monitor and schedule equipment calibration and maintenance as per schedule and site master file.
• Perform lab housekeeping, lab cleaning and biohazard/waste management.
• Perform monitoring and procurement of lab inventory, for e.g. materials and consumables.

Continuous Improvement:

• Implement initiatives to encourage improvement of QC procedures, activities and workflows.
• Conduct routine literature review through established publication channels to ensure continual knowledge proficiency on both GMP and current technological trends relevant to CellVec’s activities.

Responsibilities

• Internal and external excursion management (MRB / Quality Claims)
• Customer data reporting
• Conduct Quality related training
• Support customer survey and audits
• Continuous improvement activities

Requirements

• Degree in Engineering or Science
• Minimum 2 years relevant experience
• Systematic and analytical problem-solving skills
• Proactive and Multi-tasking
• Good communication skills and a team player
• Auditing experience is a plus
• Good working knowledge in Statistical Process Control (SPC) and Statistical techniques is a plus
• Understanding of system flow and database; basic IT knowledge is a plus

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

Responsibilities

• Generate inspection report, Certificate of Compliance (COC) and other relevant documents required for shipping
• Prepare inspection, Frist Article inspection report, other QC reports as specified in the quality plan
• Convert raw files to PDF format; scan files and electronically store into various databases
• Coordinate with production supervisors whenever product quality out of specification
• Any other ad hoc duties as per assigned by superior

Requirements

• Minimum GCE ‘O’ level & above
• Knowlege in basic computer skills
• Able to work as a team player, pro-active, self-motivated and high sense of responsibility.
• Will provided with Training
• Able to commit for a period of at least 6 months
• Working Location: Ubi area

* Kindly indicate the period you are able to commit to the intership in resume*

As a QA Lead, you will oversee all aspects of quality assurance for Manabie's Salesforce and ERP systems. You will design and implement testing strategies, manage the QA team, and ensure that our solutions meet the highest standards of functionality, reliability, and performance.
Your expertise in Salesforce, Second-Generation Managed Packages (2GP), and ERP workflows will be critical in shaping our testing processes. This is a leadership role where you'll contribute to the development process, enhance testing capabilities, and mentor the QA team.

Key Responsibilities

• Quality Assurance Leadership:Develop and implement comprehensive QA strategies for Salesforce and ERP systems.
  Oversee end-to-end testing processes, ensuring coverage of all functionalities, workflows, and integrations.
  Manage and validate Second-Generation Managed Packages (2GP) testing.
  
• Test Execution and Reporting:Develop, execute, and maintain detailed test plans, test cases, and test scripts.
  Analyze and document test results, providing actionable insights to stakeholders.
  Produce regular reports on test progress, defect metrics, and overall system quality.
  
• Team Management:Lead and mentor a team of QA engineers, setting priorities and managing workloads.
  Ensure the team is aligned with project timelines and quality goals.
  
• Collaboration:Work closely with Product, Tech, and Domain Specialist teams to understand requirements and ensure alignment on quality expectations.
  Collaborate with developers to resolve defects efficiently and optimize system performance.
  
• Continuous Improvement:Identify areas for process improvement to increase testing efficiency and effectiveness.
  Stay updated with industry trends and tools to enhance QA practices.
  

Qualifications

• Experience:At least 5 years of experience in software quality assurance, with a focus on Salesforce and ERP systems.
  Hands-on experience with Salesforce testing, including customizations, workflows, and integrations.
  Familiarity with Second-Generation Managed Packages (2GP).
  
• Technical Skills:Proficiency in test management tools (e.g., JIRA, TestRail).
  Experience with automated testing tools (e.g., Selenium, Provar) and frameworks.
  Knowledge of API testing and performance testing tools.
  
• Soft Skills:Strong analytical and problem-solving skills.
  Excellent communication and leadership abilities.
  Detail-oriented with a commitment to delivering high-quality solutions.
  
• Certifications:Salesforce Administrator or Developer certifications are a plus.
  

Role: Quality Engineer (QE)

Position Overview:

The Quality Engineer is responsible for ensuring the quality of construction materials, processes, and workmanship throughout a project. This role involves QA/QC document developing; monitoring site quality control activities; monitoring compliance with standards; implementing quality assurance procedures to deliver projects that meet contract, client specifications, international standards and Singapore regulatory requirements. This role is essential to delivering high-quality, durable, and safe civil engineering projects while maintaining efficiency and minimizing risks.

Key Responsibilities:

1. Take part in developing QA procedures as per the required by project Quality Assurance Plan.

2. Develop and/or review QC report templates, checklists as per ITPs.

3. Take part in developing quality training materials as per project quality requirements, and technical specifications. Conduct quality training to subcontractors’ QC inspectors and site supervisors.

4. Conduct regular checks for site QC activities and QC report completion.

5. Take part in project internal quality audits in accordance with project audit procedure to ensure compliance with company ISO 9001 QMS, Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

6. Take part in project external quality audits to subcontractors in accordance with project audit procedure to ensure compliance with subcontract, project specifications, codes, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

7. Regularly monitor project KPIs, ensure out-of-target KPIs are identified and raised to applicable subcontractors for root cause analysis, at the meantime, report to QAQC manager.

8. Coordinate with discipline engineers, subcontractors, the client, third party inspectors to ensure project quality requirements are met.

Work Environment:

Ø Combination of office and on-site work.

Ø Working overtime may be required, and working at a fast pace.

Requirements for the role:

Ø Degree or Advanced Diploma in Civil Engineering or related engineering field.

Ø At least 6 years of relevant QE experience in Singapore.

Ø Experience in quality assurance (QA) and QA document developing.

Ø Experience in site quality control (QC) related inspection and tests.

Ø Experience in defects rectifications.

Ø Strong knowledge of construction materials, techniques, and standards (BS EN, SS, ASTM).

Ø Excellent problem-solving and analytical skills.

Ø Strong communication and interpersonal skills.

Ø Certification in Quality Management (e.g., ISO 9001) is a plus.