Responsibilities:

·Driving Root Cause analysis in problem diagnosis from customer anomaly to ensure problem prevention and resolution implementation ensuring effectiveness

·Management of Change communication to customer for approval to implementation

·Develop, implement, and improve the department and product total quality system to assure product specification is met

·Facilitate and work with team members on quality improvement to the product by providing technical guidance in QE tools applications

·Perform quality system or process audit to assure quality systems are in place

·Support the viper manufacturing in ensuring product meets the established standards of quality including reliability, usability and performance required

·Establish & Implement manufacturing quality metrics and lead team on to achieve the goal and continuous improvement

·Meet Plant/Department cost & quality objectives

·Implement lessons learned across manufacturing and also new products development projects

·Perform special projects to support continuous improvement on an ongoing basis thru functional standardization and implement process improvement ideas in primary work area.

·To adhere to the Health & Safety regulations as set out by the EHS Department and any other Government regulations

EDUCATION AND EXPERIENCE (Minimum Qualifications)

Degree in Electronics Engineering

5 years of experience in a Quality/Engineering in Product Design Engineering/Manufacturing environment preferred

SKILLS

Analytical problem-solving skills

Proficient oral and written communication/presentation skills

Basic print reading and interpretation of specification skills

Good knowledge of FMEA, Control Plan

Advanced statistical experience with quality tools usage and Product Design Development Cycle is preferred

Certified Design for Six Sigma/Six Sigma Black Belt/Reliability Engineer will have an added advantage

*Disclaimer statement:
Career Scam Disclaimer: BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website. To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. Applicants should never provide their Social Security numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. Job applicants are invited to contact BorgWarner through BorgWarner’s website to verify the authenticity of any employment opportunities

Job Description

· Maintain and upkeep AS 9100 and ISO 45001 requirements and procedures

· Conduct Internal Quality/ Process Audit and attend to external audit needs.

· Manage/ Perform and fulfil customer quality requirements includes document and reports submission.

· Manage First Article requirements which includes CMM programming.

· Quality Methodology – Training Material or past Stimulated Results will be used.

· Prepare and submission of Quality KPI.

· other duties assigned by the superior

Job Requirements:

· Min Diploma in Mechanical or equivalent

· Able to work independently.

· Knowledge in AS9100

· Good knowledge in Engineering Drawing Interpretation and GDT.

· Experience in CMM operations will be advantage added.

Job Requirements:

• Degree in Information Technology or equivalent.
• Must have minimum 4-6 years of experience in Software Quality Testing with hands-on experience in Automation Testing.
• Experience with open-source automated testing frameworks such as Cucumber, TestNg and Playwright.
• Experience with open-source performance testing tools such as JMeter, Gatling, Locust or enterprise level tools such as HP LoadRunner
• Experience with open-source penetration testing tools such as ZAP, Burp Suite, SQL Map or enterprise level tools such as HP WebInspect, Nessus, CheckMarx.
• Must have strong understanding of testing techniques, risk analysis, test-driven development, continuous integration and continuous delivery.
• Must have proficiency in programming languages such as Java or Kotlin with good to have knowledge in Springboot.
• Experience working in SCRUM teams.
• Excellent written and verbal communications skills

JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

Note: This role requires frequent travel and will be based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Key Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to address and resolve abnormal quality issues within the manufacturing process.
• Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Drive efforts to improve internal quality control procedures and enhance process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead initiatives to resolve customer-reported quality issues, ensuring timely and effective resolutions.
• Prepare detailed reports for stakeholders outlining corrective actions and preventive measures.
• Develop and implement strategies to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to enhance inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a unified approach toward achieving quality objectives.
• Manage personnel-related tasks, including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Oversee the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor’s degree in a relevant field; advanced degree preferred.
• A minimum of 6-8 years of proven experience in quality management, particularly within manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience collaborating with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.
• Willingness to travel frequently and be based in China and Vietnam for at least 10 months per year (separate living accommodations provided). The role includes annual 4 round-trip tickets back to Singapore.

We are looking for one technically strong and motivated Manager to support the Assurance R&Q Independence Office.

How will you value-add?

• Provide consultation advice to professionals from various Lines of Service, who seek input for a variety of personal, system and engagement-related independence queries
• Conduct various independence compliance activities such as:
  1. Personal independence compliance testing
  2. Run the Annual Compliance Confirmation activity
  3. Data quality reviews
• Assist in management of independence systems
• Provide support in collation of information and statistics for local, global and regulatory reporting purposes
• Develop relevant independence practice aids, templates and training materials to aid professionals in the firm in complying with independence requirements
• Project manage global or local initiatives as required

About you

• Audit experience preferred
• Have good project management skills
• Possess high level of accuracy and attention to detail
• Have strong analytical & problem-solving skills
• Enjoy meeting people and have the confidence and maturity to deal with all levels of staff
• Has the willingness to learn and deliver timely and quality results

Overview

The Job Holder will support in building improvement capabilities and culture in the NUHS Regional Health System Office (RHSO), including community partners such as GPs. The Job Holder will be involved in co-developing and conducting quality improvement training for RHSO staff and community partners, as well as facilitate and coach small to large scale improvement projects through the use of appropriate tools/methodologies.

Job Responsibilities

1. Deliver QI Training

• Develop training materials and resources (e.g. training guides and e-learning videos) on quality improvement
• Conduct and facilitate quality improvement training sessions/workshops for RHSO staff and partners
• Gather feedback on training sessions and use of appropriate improvement methodologies/tools
• Deliver training on lean management and human-centred tools to impart knowledge and skills to hospital staff.

1. Facilitation of improvement projects

• Facilitate and coach department/division and organisation-wide level improvement projects to improving quality and processes through the use of appropriate tools/methodologies
• Monitor the progress of improvement activities and guide teams to take appropriate actions
• Assist in interpreting data to measure the effectiveness of the improvement activities

1. Strategy & Culture Building

• Assist in development and implementation of Improvement framework and strategies
• Support initiatives or events that promote improvement and Innovation culture in RHSO
• Lead engagement with HODs to influence and identify areas of improvement in quality and safety

1. Any other tasks as assigned

Requirements

Qualification Required and Area of Discipline

Good degree in any discipline, preferably in Life Sciences, Business Administration, Industrial Design

Prior healthcare sector experience is preferred

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Proficient in quality improvement methodologies such as Lean, process/value-stream mapping, design thinking
• At least 1-2 years of experience in facilitating workshops and conducting trainings
• Confident in coaching and guiding fellow colleagues in Quality Improvement tools
• Certified Six Sigma Green/Black Belt will be an added advantage
• Able to engage stakeholders and work through doctors, nurses, allied health professionals, operations and administrative staff
• Able to work independently and as a team
• Ability to perform even under tight timelines
• Good analytical and organization skills
• Good writing and verbal communication skills
• Open to learning and trying new things. Able to grasp concepts easily and be able to think on the feet.
• Highly self-driven and self-motivated, positive attitude and perseverance to overcome obstacles

Responsibilities

• Communicate and reconcile quality / technical matters to various stakeholders.
• Investigate supplier non-conformance, drive root cause analysis, discuss corrective actions and implement process improvement, including source inspection.
• Work with suppliers to ensure their manufacturing processes comply with customers’ expectations.
• Monitor non-conformance performance and collaborate with suppliers to drive continuous improvement in supplier’s quality.
• Maintain and improve product quality by completing product and compliance audits.
• Prepare and review monthly data to analyse quality issues.
• Process engineering changes (ECN).
• Maintain customer’s claims system.
• Maintain calibration process for Shimadzu’s equipment.
• Ad-hoc duties as assigned.

Requirements

• Diploma or degree in supply chain management, engineering or science.
• At least three years of experience in quality engineering or related role.
• Having experiences in mechanical engineering or related field will be advantageous.
• Possess good communication skills and able to articulate ideas succinctly to local and international stakeholders.
• Possess a good analytical mind, positive attitude and patience under challenging situations.
• Having a tenacious desire to solve challenging technical problems will be a distinct advantage.
• Possess a good organizational skill and a strong penchant for neatness.
• Possess a high level of proficiency in Microsoft Office and Microsoft 365.
• Able to work independently and a good team player.
• Possession of a Class 3 driving licence is preferred.

We regret that only shortlisted candidates will be contacted.

• MNC
• Industry Leader
• Permanent Position
• Knowledge in ISO 22000 / FSSC22000, or any other GFSI recognized certification
• Knowledge in ready-to-eat, cooked chilled / freeze production food safety requirements

Our client, a leading quality food provider and wholesaler, is looking for suitable talents to join their growing business as QA Manager.

RESPONSIBILITIES:

• Be the main person in charge in maintaining the Management System (FSMS and HSE).
• Manage and report actions for products under quality on-hold or other issues to the Management including major issues which could affect business performance.
• Lead and ensure the QA team perform their roles and responsibilities as defined in their job description.
• Ensure all products received, stored, process, packed and distributed in compliance with SOPs
• Key contact person for operational staff, customers and suppliers on Quality matters.
• Overseeing and Handling of customer complaints/feedback and Goods Return.
• Ensure process monitoring - GWP/Pest Control/Hygiene/Safety in the company compound.
• Ensure compliance of CCP / OPRP and food safety requirements of manufacturing kitchens.
• Involving in regulatory, statutory and customer’s audits and assist in follow-up corrective/preventive actions.
• Manage Document Control.
• Relationship management on QA or compliance matters, supporting our Sales, Operation & Logistic team.
• Handle licensing and certification application and renewal with authorities and certification bodies.
• Any other ad hoc duty as assigned by the Management.

REQUIREMENTS:

• Diploma or Bachelor Degree in Food Science or relevant disciplines
• Minimum 5 years of relevant working experience, with supervisory/people management experience
• Knowledge in ISO 22000 / FSSC22000, or any other GFSI recognized certification
• Knowledge in Halal, ASC & MSC, ISO45001 and BizSafe certification
• Comfortable with communicating with internal stakeholders and external parties (Eg, SFA officer, auditors, customers, vendors, etc).
• Technically oriented and able to deal with meat product
• Knowledge in ready-to-eat, cooked chilled / freeze production food safety requirements
• Knowledge in product labelling requirements
• Proficient in MS Office applications

OTHER INFORMATION:

• Location: West
• Working hours: Monday to Friday, Office Hours
• Salary: Salary will commensurate according to experience & qualifications.
• The Company strives to achieve employee satisfaction and provides a conducive working environment, attractive incentives, and remuneration to all staff.

HOW TO APPLY:

Interested candidate, please submit your updated resume in MS WORD Format to Florence Pang Rou Jing (R23118044) :

Email – [email protected]

or reach out to your Friendly Consultant, Florence at WhatsApp 8655 6810 (text message only) for a confidential discussion.

Please click “Apply Now” button to submit.

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence. By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

We are looking for a Quality Control Assistant to support the Quality Assurance Executive in maintaining the highest standard of product quality and safety.

Job Description:

• Responsible for FSMS (GMP, HACCP, ISO 22000, HALAL) monitoring
• Consistent monitoring of quality and specification of product during processing
• Perform inspection for incoming material and outgoing finished product
• Recording and maintaining data for QC information
• Collect samples for product testing
• Report to the department lead on nonconforming products or processes detected

Requirement:

• Physically fit to work in cold room environments with the ability to stand and walk for extended periods.
• WSQ Food Safety Course Level 1 and/or Level 3 certification preferred, familiarity with food/seafood handling and processing is a plus.
• Meticulous with strong organizational and communication skills.
• Strong communication, organizational skills, and ability to walk and stand in a fast-paced cold working environment.
• Proficient in English and Mandarin to interact with Mandarin/English-speaking stakeholders.
• Willing to take up ad-hoc duties assigned by the company.
• Knowledge of SAP will be advantageous.

Job Highlights

• Job Types: Permanent/Contract
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, alternate Sat
• Great learning development opportunities.
• Work-life balance and positive/friendly working environment.

Job Description:

• Conduct DFM for parts manufacturing
• Perform FPA (First Part Approval) for mechanical parts
• Review parts manufacturability and parts design before tooling fabrication
• Generate FPA report, update status and results and share with internal staff and suppliers
• Identify CTF dimensions to be included in Incoming Inspection
• Prepare of Incoming Inspection instructions for parts that require inspection
• Investigate production fallouts due to part quality, collect data and study for root cause and countermeasure
• Work with supplier on improvement of parts quality activities
• Perform periodic factory audits on vendor capabilities, facilities, processes and prepare audit reports

Job Requirements:

• Candidate must possess at least Bachelor's Degree in Electrical Engineering or equivalent
• Preferably have 1 year of working experience but candidate with no working experience is welcome to apply too
• Knowledge in stamping, Plastics Moulding & Machining processes
• Self-motivated and able to meet deadlines
• Proficiency in Mandarin in order to liaise with China suppliers
• Willing to perform overtime when required

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

Job Description

• Provides support on quality systems, processes, and procedures to ensure compliance with FM Contract, Company’s, and ISO policies.
• Responsible for preparing and conducting quality control checks, investigations for potential quality non-conformance, compliance concerns and recommend follow-up actions to mitigate such issues on Building Facilities including M&E Systems, Building Systems and soft services.
• Prepare report for management review and facilitate for follow-up actions required.
• Attend regular maintenance meetings on behalf of the Company with Clients and Clients’ Representatives.
• Lead the internal audit program for operation site include identifying opportunities for quality systems’ improvements and meet company’s quality objectives.
• Maintain good records and filing systems of reports for future reference and coordination

Job Requirement

• At least 3-5 years relevant working experience in Engineering, Facilities or Estates Management, Quality Management Systems, Quality Control or equivalent.
• Minimally Diploma in any Engineering field, Facilities or Estates Management or equivalent with knowledge in ISO Standards 9001, 14001 and/or 41001.
• Certified QMS Auditor / Lead Auditor in ISO or equivalent will be advantageous.
• Pro-active, independent yet service and team-oriented, and able to perform under pressure with minimal supervision.
• Strong interpersonal and communication skills with ability to work cross-functionally with different departments to meet timeline and objectives.
• Location is at Singapore Polytechnic
• 5.5 work day

Responsibilities & Requirements:

The successful candidate for this role is expected to have a strong background in Regression and end-to-end Testing, with a deep understanding of JSON, API, and SQL. Familiarity with financial instruments and entities will be considered a plus.

This role requires an individual who is a fast learner, able to quickly comprehend business requirements and translate them into effective test cases using our in-house automated regression tools.

Skillset (Must have)

• Proven experience as a Software Test Engineer or similar role.

• Proficient in JSON, API, and SQL.

• Experience in regression and end-to-end testing.

• Strong problem solving skill and attention to detail.

• Excellent communication skill.

• Ability to learn quickly and work in a fast-paced environment.

• Experience in writing clear, concise, and comprehensive test plans and test cases.

• Willingness to support BAU operations as needed.

Skillset (Good to have)

• Familiarity with financial instruments and entities.

• Experience with performance testing.

• Knowledge of Agile/Scrum development principles.

• Experience with automated testing tools.

• Understanding of coding and scripting for automation purposes.

• Knowledge of continuous integration and continuous delivery (CI/CD) processes.

• Familiarity with version control systems like Git.

• Knowledge of software QA methodologies, tools, and processes.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

The Service Quality Associate (SQA)act as the media between internal partners and residents as well as their families. The SQA is to maintain high standards of care and service delivery, promoting residents’ well-being, and ensuring a conducive living environment for residents, through gathering feedback and working with internal partners.

Work Location: Senja Care Home

Client Care Management

• Act as the point of contact to interact and gather feedback from residents and their families to understand their needs and preferences.
• Work towards resolving issues and ensuring a positive outcome for all parties involved.
• Collaborate with internal partners within the care home to ensure a cohesive and collaborative approach to resident care and service delivery.
• Identify and share areas of improvement and provide recommendations.

Training and Activity Management

• Coordinate and deliver in-service talks to residents and staff.
• Encourage residents to participate in activities and events for their health well-beings.

Service Quality

• Monitor and evaluate the quality of care provided to residents by conducting regular assessments, audits and surveys.
• Identify areas for improvement and recommend strategies to enhance the quality of services.
• Implement initiatives to enhance resident satisfaction and improve the overall resident experience.
• Prepare reports for management and regulatory agencies as required.
• Ensure that the care home complies with all relevant regulations, policies, and procedures. Stay abreast with industry standards and best practices to maintain compliance.
• Escalate to HOD or Senior Management Team (SMT) for feedback that warrants immediate attention or has insinuation of escalation to public forum or media.
• Track all visits, feedback, recommendations and report at Vanguard Rehab and Clinical Meeting (VRCM) platform or any other platforms when necessary or required.

Administration

• Maintain accurate records of quality assurance activities, resident feedback, and compliance measures.

Requirements

• Diploma / GCE “A” level / GCE “O” level / GCE “N” level in a relevant discipline
• Possess at least 1 - 2 years working experience in Service Quality function or quality improvement programmes in healthcare or similar setup.
• Those with experience in Nursing Homes and/or long-Term Care Facility would be preferred.
• Ability to interact in at least 2 of the languages/dialects such as Malay, Mandarin or Tamil to communicate with the clients and families.
• Effective interpersonal, engagement and follow-up skills
• Detail-oriented
• Passion for quality and ageing issues
• Good written and verbal communication skills

Job description

Our Office Location : 2 Seraya Place, Jurong Island, Spore 627857

1 Responsibilities

• Establish, develop, update and maintain the QEMS system and work with respective stakeholders to develop and revise procedures (ISO 9001:2015).
• Monitor & analyze trends and quality performance.
• Manage the certification and audit of the Company ISO (ISO 9001:2015 internal and external audits) to ensure all ISO 9001 and relevant certifications’ objectives and requirements are met.
• Manage and ensure internal and external audit comply to QEMS requirement. This includes maintaining accurate records and coordination of initiatives improving QEMS.
• Effectively communicate the QA strategies, processes, and needs across organization through quality programs and campaigns.
• Participate in customer audit, lead investigations of quality issue with customers and internal stakeholders and follow up the CAPA action items to resolve all customer feedbacks / complaints.
• Inculcate and promote a culture to deliver high standard of quality in services rendered to customers.
• Responsible for managing Supplier / Vendor management on-boarding, improvements based on non-conformities, supplier audits and KPI’s.
• Support internal stakeholders on Management of Change.
• Liaise, fulfill, monitor and update customer on their KPI and other requirements.
• Responsible for monthly quality management review meeting and other quality performance reports where required by Management.
• Inspect Warehouse, Drumming including Transport & Yard areas and processes to ensure compliance with quality standards.
• Conduct training on ISO 9001 requirements, quality awareness and quality related issues.
• Contribute to any other projects assigned by the Line Manager.

2 Requirements

• Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• ISO 9001:2015 lead or internal auditor certificate from accredited institution would be an advantage
• Minimum 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.
• Demonstrate strong leadership skills with at least 3-5 years’ experience in leading a quality team.
• Experienced in improving, maintaining and drives implementation and compliance of ISO 9001 management system would be an advantage.
• Experienced in customer / supplier quality management would be an advantage.
• Positive can-do attitude and self-initiated with strong sense of job ownership.
• Innovative problem-solver and believes in continuous improvement.

Role Purpose

The Construction Quality Data Clerk is assigned to Construction Yard, reports to Construction Quality Manager and is responsible for:

• Supporting and liaising with Construction Quality Manager for Quality KPI and tracking CQ documentation readiness,
• Database management (input, analysis and output) related to project CQ data,
• Contribute to the Construction Quality Department software developments,
• Coordinate project final documentation completion.

Education, Experience and Certification

• University degree or technical college diploma in Engineering or Data Analysis.
• Certification of auditor is beneficial while not mandatory.

Functional Competencies

• Experience in data analysis, with particular emphasis on database and deliverables, preferably with a Quality Control background but not mandatory,
• Strong knowledge in Excel and Power BI
• Experience in PIMS, Go-Tech, Hexagon, SQL Server, Access, VB.Net and C/C++ will be a plus
• Strong analytical and problem-solving skills.

• Possess knowledge in GMP and halal certification processes
• Assist in GMP preparation for audit
• Assist QC manager in daily operations
• Testing of finished products against specifications and to notify for any out of specifications
• Maintenance of manufacturing facility as per GMP requirements
• Prepare products for testing from external laboratories
• Conduct instrument analysis and calibration of laboratory equipment and basic equipment maintenance
• Assist in generation of Certificate of Analysis
• Conduct incoming materials check

Requirements

• Minimum Diploma in Chemistry or relevant courses
• Minimum 2 years of experience
• Able to work independently with minimal supervision
• Able to write and communicate in English
• Knowledge in Excel and word
• Knowledge in SAP will be an added advantage

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Job Scope:

• Responsible for full spectrum of the Company’s quality standard
• Issue, maintain and file all QA reports (e.g. 8D report)
• Ensure maintenance of proper records pertaining to quality related issues
• Send QA reports to vendors
• Ensure timely closure and response of all QA issues
• Ensure effective corrective action taken for all NCR/CAR issued
• Follow up with vendors on their corrective action for rejected parts
• On-site audit at vendor’s location whenever required
• Conduct FA inspections
• Issue, maintain and file FA reports
• Maintain and upkeep Quality Management System and Quality System Procedure in accordance to ISO9001

Trait, Skills and Qualifications:

• Diploma / Degree in Electronics Engineering
• Possess knowledge of ISO9001
• Knowledge on ERP system would be an added advantage
• Resourceful and able to work independently
• Good at problem solving, negotiating and communicating
• · Team player

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

The Client is a global aerospace company.

Responsibilities:

• Ensure product and process quality by maintaining the quality management system and complying with relevant regulations and customer requirements.
• Update and improve quality procedures and control instructions.
• Address non-conformance issues with customers, vendors, and suppliers, conduct root cause analysis, and implement corrective actions to minimize quality-related costs.
• Conduct internal audits to assess the quality system, products, and processes (ISO9001 / AS9100 / NADCAP).
• Perform audits of vendors and on-site as needed.
• Adhere to customer and regulatory standards.
• Work to reduce monthly costs associated with poor quality and scrap.

Requirements:

• Degree in Mechanical or Aeronautical Engineering or a related field.
• At least 2 years of experience with ISO9001 / AS9100 Quality Management System and NADCAP.
• Proficiency in problem-solving tools such as fishbone diagrams, FMEA, and the 5-whys methodology.
• Ability to read and interpret technical drawings.
• Strong analytical and communication skills.
• Ability to multitask and attention to detail.
• Familiarity with NADCAP processes like heat treatment, non-conventional machining, shot peening, and chemical processing is a plus.

· Responsible for developing, implementing, and maintaining Quality Plan for FA and production parts.

· Responsible for maintaining company measuring instruments.

· Interpret and analyse customer specifications with great details

· Identify, document, and report defects or anomalies, working closely with cross-functional teams to address and resolve issues promptly.

· Facilitate meetings for production and quality personnels

· Support in internal and external audits.

· Maintaining Company’s Quality Management System (QMS)

· Any other duties as assigned by Supervisor.

Job Requirements:

· Technical certificates in any Engineering field

· Effective communication skills, both written and verbal, to liaise with customers and suppliers

· Ability to work with production and office staffs

· Ability to write root cause analysis

· Flexibility and adaptability to take on new challenges and responsibilities.

· Ability to read and interpret mechanical drawings