• To promote a Zero Harm culture & best practices through the implementation of a tailored safety, quality and environmental management system including the development and implementation of appropriate policies & procedures to ensure a safe and efficient workplace.
• To ensure regulatory compliance & due diligence to safety, health, quality, dangerous good/hazardous substances and environmental obligations.
• To liaise with all business units on matters relating to safety, quality and environment including potential non-compliance of a regulatory nature.
• Compliance with all relevant safety, quality, environmental & P&C policies & procedures to ensure a safe work environment at all times.
• Actively liaise with all departments to ensure quality control, quality assurance and safe practices are adhered to at all times.
• Work with A-Gas management to implement its policies, procedures, work instructions, mission and goals.
• Lead by example in demonstrating personal qualities, behavioural traits and A-Gas values & behaviours.
• Timely management reporting in the manner and form as required from time to time.
• Perform site inspections as required.
• Actively participate in internal & external project meetings and provide sound recommendations on SQE initiatives and/or highlight any deviations & possible risks if any.
• Manage & maintain integrated certified Safety, Quality, Environmental management systems to ensure continued compliance to ISO 9001, ISO45001, ISO14001, ISO17025 (NATA), and other relevant standards like ISO 31000 where applicable.
• Identify and maintain compliance to relevant WHS, Environmental & other acts, regulations, codes of practices & guidelines etc.
• Audit SQE Management System, including reviewing, monitoring, measuring, reporting on performance.
• Recommend and implement continual improvement to the SQE system, work instructions and associated processes.
• Promoting awareness of SQE requirements, communicating and consulting with all staff & other stakeholders on SQE processes, documentation and regulatory requirements.
• Development and implementation of SQE documentation relevant but not limited to procedures, plans, hazard and aspect identification, risk assessments, emergency preparedness & response, design & development, management of change, control measures, management review including ad hoc measures based on current environmental occurrences.
• Actively lead & participate in Operational Safety, Process Safety, Risk Assessment, HAZOPs, Pre-Purchase Risk Assessments, Management of Change & Design & Development, SQE incident investigation & root cause analysis and processes.
• Active participation and collaborating to provide SQE / technical advise as required to the Lab Team, Customer Service, Operations, Engineering, Rapid Recovery and wider A-Gas Group & other relevant stakeholders.

Job Scope:

· Manage QC data of assigned projects, including performing QC checks/audits on interviewers via telephone validations, audio audits, onsite checks, and observations

· Supervise the Data and QC Team to ensure that work is done in accordance with project specifications.

· Review and rectify data discrepancies, and upkeep multiple datasets by compiling, cleaning, and sorting information according to established data fields to support overall data management.

· Script and conduct User Acceptance Testing (UAT) - checking, formatting, reviewing, and testing survey links for questionnaires.

· Ensure data consistency and accuracy across multiple variables and different datasets in accordance with project specifications and the conventions used within the dataset.

· Perform data coding, cleaning, and processing to ensure it is in accordance with industry standards of SSOC and SSIC or the related code frame provided.

· Manage longitudinal panel data, including merging and stacking panel data across different waves via syntax.

· Conduct operational data analysis and reporting: using SPSS/Excel to perform data validation and updates on key variables to identify issues related to data collection and quality, and to generate quality reports.

· Use SPSS to visualize relevant key variables using tables or other relevant visualization tools to identify possible issues and understand the breakdown of these key variables for decision-making.

· Train interviewers in accordance with project specifications to ensure that the quality of interviews is kept at high standards.

· Provide timely feedback to the Field team based on validation results to rectify any data discrepancies.

· Evaluate and generate reports on the quality of data collected by the interviewers

· Liaise with vendors on project-related logistic matters

· Liaise with clients to process data within their requirements

· Assist in vetting translations of survey questionnaires when required

Requirements:

· Bachelor’s degree with at least 1 year of experience working with data related to government-related research projects or the market research field

· Experience in coding SSOC and SSIC

· Prior experience in training new staff

· Keenly interested in data analysis

· Possess data management skills and computer knowledge, programming knowledge, and web development experience in SPSS, Python, R, and HTML.

· Know how to use and have experience using Case Management System, SPSS DimensionNet, and Qualtrics for data collection; solid knowledge of writing SPSS syntax for data logic checks and data processing

· Good interpersonal and communication skills

· Meticulous and detail-oriented

· Ability to prioritize workload, be resourceful in getting things done to meet deadlines, and cope well with stress

Additional Information:

· Contract duration: 12-month contract, renewable

· Working days and hours: Mon to Fri 9am to 6pm

· Location: Commonwealth, Evans Road

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Engineer (API Q1/Q2) to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Ensuring that corrective measures and deviations meet with the standards
• Responsible for the creating and executing methods and procedures for whole process of production equipment (e.g. the inspection, testing, and evaluation of the products).

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Description

• Reporting to Global Category Microcontroller & Memories (MCM), strive to secure “Best in Class” consistent and sustainable supplier quality performance to reach the Continental Business and Quality targets.
• Maintenance of the defined Supplier Quality Management System (procedures, guidelines, and tools) to ensure the requested quality is in line with the defined supplier management strategies to meet the quality targets.
• Execution of supplier evaluations and assessments to support the cross-functional supplier selection team with the required quality data.
• Driving supplier development & improvement activities at supplier's site.
• Initiation and introduction of the preferred supplier and components strategy.
• Design, initiation, and control of preventive quality management measurements in the design and development phase for supplied parts and services to ensure that our products meet the quality requirements defined.
• Component introduction through robust APQP process which include Component sourcing, writing of specifications, handling of qualifications and risk management.
• Manage change requests (PCN) from component suppliers and assure comprehensive qualification of any change.
• Support of the data system to collect and evaluate supplier quality related key performance indicators (KPIs) for the regular reporting of quality performance.
• Support for the continuous improvement process of all supplier quality-related processes, guidelines, and tools by means of supplier audits, on-site assessments, and benchmarking and best practice sharing programs.

Qualifications

• Degree in Electronics/Electrical Engineering (or related) with minimum 5 years’ experience, preferably in the automotive industry
• Candidates with experience in semiconductor processes (e.g., wafer process technologies, back-end assembly, and testing), knowledge in electronic component & qualification requirements (e.g., AEC-Q, JEDEC, IP qualification) preferred. Candidate with more work experiences may be considered for Principal role.
• Strong experience in quality systems, process audits and part qualification.
• Understanding of automotive practices such as APQP/PPAP/VDA6.3/IATF16949.
• Able to lead suppliers' development and audit activities within Asia.
• Able to work independently and travel frequently (e.g. SE-Asia, China, Japan & S. Korea).
• Strong interpersonal and communication skills e.g. in collaborations, problem solving process, conveying technical details and presentation.

Responsibilities (include but are not limited to):

· Work with the Manufacturing department as a production area Quality Assurance representative

· Coordinate and facilitate Quality Assurance related production and production related activities

· Ensure timely issuance of production records, procedures and labels

· Ensure timely assessment and closure of discrepancies, Deviations and Change Controls

· Review batch-related documentation, and ensure resolution of issues to release product

· Communicate lot disposition pending issues to Management

· Ensure approval and timely delivery of Final Product

· Ensure that products are manufactured in compliance with regulatory and GMP guidelines

· Review and approve Manufacturing and Validation documents for Regulatory and Kite compliance

· Review and approve Manufacturing Production Records

· Compile and verify all batch related documents into a Final Product lot disposition package

· Provide Quality Assurance support resolving material, in-process product, final product, environmental, facility and equipment manufacturing issues

· Review and disposition disposable raw materials and components for GMP use

· Review equipment and facility technical and investigation reports

· Review and approve proposed changes to systems, procedures, methods, and submissions to regulatory agencies

· Gather metric information for use in continuous improvement of areas of responsibility. Report to management as needed.

· Perform other duties as required

Requirements:

• Min Diploma / Degree in Chemical Process Technology, Foodscience, Biotechlonogy, Biology, Biomedical Sciences, Science or its equivalents
• No Experience Needed, Full training/ on the job guidance will be provided
• Able to start immediately

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected] (Attn: QA Specialist)

Thank You.

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

• The Senior Supplier Quality Specialist will reports to the Supplier Quality Supervisor will be responsible to support the development and maintenance of Supplier Quality Management business processes to comply with all applicable regulatory requirements and Quality Policies and Procedures.
• You will ensure oversight on the site’s supplier quality and material release processes are executed in accordance to Quality Policies and Procedures

Major Responsibilities:

• Provide Leadership for the Supplier Quality team as a senior specialist in the absence of the manager and Supervisor
• Ensure compliance with applicable policies, processes and procedures, contributing to the execution of strategies and oversight of Supplier Quality programs
• Execute and provide oversight on procedures to ensure that incoming materials including raw materials and commodities received at our Company to meet approved company policies and processes.
• Manage investigations arising from materials nonconformity with cross functional team.
• Serves as the primary contact to review and follow up on Supplier Qualification documentation (e.g. Approved Supplier Lists, Quality Questionnaires, customer complaints, Supplier packages etc.) and activities (e.g. supplier audits, supplier review, supplier change notification etc.)
• Prepare, maintain and facilitate review of the GMP documentations (Quality Technical Agreement and Internal Quality Technical Agreement)
• Coordinate site supplier quality issues (such as deviations), audit assessments and subsequent follow-up actions.
• Support global supplier quality team initiatives or other site improvement projects. Perform review/audit of Incoming material inspection package which includes receiving, sampling and testing compliance. Completion of Incoming Raw Material checks and release and the administration of Quality Logs, e.g. QA Hold.Review / Approve material master data set up for new material introduction.

Requirements

• Min Diploma / Degree in any science / engineering courses
• Min 2 years of Supplier quality exp or handle complains before from suppliers

$4K to $5K

office hours

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

As a Non-Volatile Memory Quality & Reliability Assurance (NVMQRA) Engineer at Micron Technology, you will be responsible for performing formal Failure Analysis of customer reported failing devices via the Returned Material Authorization (RMA) process. You will be required to summarize lab analysis results at the electrical and physical level to identify root cause and establish an associated containment plan. In this role, you will have the opportunities to collaborate with various engineering and manufacturing stakeholders to evaluate and review Corrective Actions /Preventive Actions. You will provide documentation of the RMA findings and oversee the final customer report till closure. In addition, for the senior role, you will be asked to provide guidance and lead the team when solving complex unplanned deviations reported by our customers. Project management skills are necessary and the ability to make critical decisions that directly translate to quality and timely completion of the project is highly desirable. You will also be required to spearhead the sustaining efforts and keeping up to date on new product knowledge, as well as developing and mentoring new talents.

Responsibilities and Tasks

Perform Failure Analysis of Customer Returns

• Understand customer complaint of the memory component failure
• Initiate communication with Micron Customer-facing team for further details on customer complaint, requesting additional questions to provide best opportunity for successful analysis
• Perform bench level analysis including initial data image analyis/examination
• Perform Automated Test Equipment (ATE) analysis and interpret results
• Work with the appropriate engineering teams (e.g., PE, PYE) to perform detailed fault isolation when electrical failure has been confirmed
• Summarize findings and submit for physical failure analysis (PFA).

Provide FA Reports for Micron Customer Facing Team for Communication to External Customers

• Summarize analysis at electrical and physical level into customer friendly formats.
• Work with the appropriate manufacturing Global Quality teams through the appropriate request systems (example: GPSS) for Root Cause and/or Corrective Action and a containment plan
• Identify potential risk to external customers
• Communicate with respective BU (Business Unit) on potential impact to customers
• Communicate FA updates through interim reports or during scheduled meetings with the customers.
• Provide formal FA Report with findings

Sustain Knowledge of Device Capabilities and Characteristics

• Keep up to date with latest Fab/ASM process technology
• Understand datasheet specifications for each device and the differences from previous technode for NOR * NAND product family
• Comprehension of qualification data and potential impact to customer operation
• Stay up-to-date on common customer applications and usage model
• Partnering with customer support team to resolve ongoing customer issues

Qualifications and Experience

• Excellent verbal and written communication skills in English. The ability to communicate clearly and concisely both verbally and in writing is critical in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work effectively in cross-functional teams and handle pressure situations in a professional manner
• Excellent problem-solving and analytical skills with strong attention to details.
• Familiarity with NexTest /Teradyne bench analytical tools, scripting in linux console will be an added advantage.

Candidates with 2-3 years of experience in the semiconductor industry as Product or QA engineer are preferred. Relevant experienced candidates will be considered for the Senior Role.

Education

A Bachelor or Masters Degree in Electrical Engineering or similar field of study.

• Position: Quality Assurance QA/QC Engineer (MUST BE from Marine Engineering)
• Location: North Bridge Road (Walking distance from Fort Canning MRT Station)
• Working hours : 5 days / Monday - Friday - 9.30am -5.30pm
• Salary (Commensurate with experience): Basic up to $ 3700 + AWS + 14 days Annual Leave
• Duration : Permanent
• Industry : Global leader in Marine Lifting Equipment

Main Responsibilities:

• Perform inspection of incoming products, materials or customer items according to job project requirement
• Perform initial inspection and raise report
• Perform in-process inspection according to procedures and customer’s specifications. Raise report whenever necessary. Measure and record the dimension of components/parts using measuring instruments and analyse the findings for discrepancy
• Perform final inspection of items including dimensional and NDT to ensure that all quality requirements has been achieved. Analyse result and decide the acceptance level of the final product
• Prepare and conduct Project Specific Quality requirements training to production Supervisors and Sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Support QA/QC Manager for establishing WPS, PQR and WQT Qualifications.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of Inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.

Requirements:

• Degree in Engineering or Diploma in Mechanical/ Marine Engineering or equivalent
• Experience in handling project Audit and liaise with internal & external auditor
• Knowledge in structural fabrication, piping isometric drawing and materials
• Experience in piping line walk, reinstatement inspections by clear understanding of isometric drawings

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• The Senior Supplier Quality Specialist will reports to the Supplier Quality Supervisor will be responsible to support the development and maintenance of Supplier Quality Management business processes to comply with all applicable regulatory requirements and Quality Policies and Procedures.
• You will ensure oversight on the site’s supplier quality and material release processes are executed in accordance to Quality Policies and Procedures

Major Responsibilities:

• Provide Leadership for the Supplier Quality team as a senior specialist in the absence of the manager and Supervisor
• Ensure compliance with applicable policies, processes and procedures, contributing to the execution of strategies and oversight of Supplier Quality programs
• Execute and provide oversight on procedures to ensure that incoming materials including raw materials and commodities received at our Company to meet approved company policies and processes.
• Manage investigations arising from materials nonconformity with cross functional team.
• Serves as the primary contact to review and follow up on Supplier Qualification documentation (e.g. Approved Supplier Lists, Quality Questionnaires, customer complaints, Supplier packages etc.) and activities (e.g. supplier audits, supplier review, supplier change notification etc.)
• Prepare, maintain and facilitate review of the GMP documentations (Quality Technical Agreement and Internal Quality Technical Agreement)
• Coordinate site supplier quality issues (such as deviations), audit assessments and subsequent follow-up actions.
• Support global supplier quality team initiatives or other site improvement projects. Perform review/audit of Incoming material inspection package which includes receiving, sampling and testing compliance. Completion of Incoming Raw Material checks and release and the administration of Quality Logs, e.g. QA Hold.Review / Approve material master data set up for new material introduction.

Requirements

• Min Diploma / Degree in any science / engineering courses
• Min 2 years of Supplier quality exp from Pharma industry

$4K to $5K

office hours

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Responsibilities:

• Develop and manage patient safety incident frameworks, conduct investigations, and analyze incident data.
• Implement and coordinate patient safety programs, including safety reviews, committees, and campaigns.
• Identify safety risks, design preventive measures, and collaborate with clinical risk management for improvements.
• Provide training, create resources, and facilitate knowledge-sharing to enhance organizational capabilities.
• Offer administrative support to safety committees and collaborate with stakeholders for quality improvements.

Requirements:

• Minimum Degree in Nursing, Social Work, or Allied Health disciplines.
• 0–4 years of relevant healthcare experience, especially in patient safety or clinical quality improvement.
• Proficient in MS Office applications; knowledge of basic statistics is advantageous.
• Demonstrates strong organizational, analytical, and communication skills; meticulous and proactive.
• A good team player with the ability to work independently and engage effectively with stakeholders.

Interested candidates who wish to apply for the advertised position, please click on “Apply Now”. Alternatively, you may email us an updated copy of your resume (Attn: HUEY) for a confidential discussion.

Job Code: HUEY

EA Reg No: R24122358 (YEO HUEY CHEEN)

EA License: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

We regret that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at https://www.persolkelly.com.sg/policies. I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Purpose:

• To be responsible for managing the interactions with third party organisations that supply QA incoming materials and/or services to GSK.
• To manage material release for incoming materials, supplier change notifications and new material management.
• To provide Quality oversight to logistics management and warehouse operations.

Key Responsibilities:

Supplier Management

• Provide QA oversight of Supplier management activities on site to achieve compliance with company policies and government regulations as assigned.
• To participate (Executive 1) and to represent the site (Executive 2) for Supplier Management business processes to drive improvements and share best practises across the GSK Vaccines network.
• Process owner/support supplier complaint process for QA incoming materials. Lodge supplier complaints and ensure suppliers identify the root cause and associated CAPA's to prevent recurrence of supplier quality issues.
• Review and track supplier-related CAPA for timely closure.
• Maintain inspection readiness, conduct supplier assessments for both new and current service providers in a timely manner.
• Maintain the approved supplier listing and audit schedule in a state of compliance and accuracy.
• Assess supplier change notifications in a timely manner and escalate where necessary especially in situations with supply impact.
• Initiate and review deviations/change control/CAPA associated with incoming material.

Executive 1: Minor deviations and CAPA

Executive 2: Minor, major deviations and CAPA

• Work closely with site user and Global stakeholders for Supplier management related matters

QA Raw Material Release and Warehouse oversight

• Support incoming material documentation review and release to recommend and confirm Usage Decision (UD) of raw material
• Ensure that material document file (MDF) is complete and accurate before disposition of material in SAP
• Ensure that system is in place for filing and archival of MDF
• Initiate and review deviations/change control/CAPA associated with incoming material releases.
• Ensure that all deviations/change controls are closed or assessed for impact on the release of the material prior to release the QA-controlled incoming material
• Provide QA oversight to warehouse such as attending warehouse tier, conduction GEMBAs, inspection readiness and warehouse related deviations, CAPAs and change control

Decision Making:

Proposals & Recommendations

• Propose improvements to work processes, with basic awareness of business requirements.
• Deviation investigations and assessments
• In addition for QA Executive 2:
• Able to provide QA oversight on routine situations independently and complex situations with supervision (deviations, changes, system issues, compliance matters)
• Able to manage simple department projects (e.g. continuous improvement) with supervision
• Greater awareness of business requirements and to highlight considerations where there is a need for escalation

Skills:

Professional

• At least University basic degree in a Science or Engineering discipline

Technical

• A good understanding of cGMP regulatory and legal requirements as applied to quality assurance of pharmaceuticals manufacturing
• User experiance with SAP will be prefered
• Ability in handling and organizing multiple workflows

Business

• Ability to apply optimal quality assurance standards to promote a business edge
• Ability to facilitate business activities commpatible to international regulatory environment
• Ability to communicate effectively within the site organization and across the network

Competencies:

• Working knowledge of FDA/EU/ICH/WHO as well as all other relevant reuglatory and technical guidelines
• Possess Analytical and Quality performance mindset
• Demonstrate professional & ethical integrity
• Fluency in the English language
• Demonstrates sense of urgency
• Ability to work both as an individual contributor and as a team player.

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To manage logistic activities within QC department

Key Responsibilities:

• Performs receipt and storage of sample in accordance to local procedure.
• Performs routine and non-routine sampling of raw materials and utilities with observation of GMP requirements
• Ensures proper packaging of samples and correct samples are shipped to offsite recipient timely
• Ensures a good inventory of QC materials (purchased and prepared materials/glassware) to support testings; ensures no over surplus of inventory
• Ensures wastes are disposed appropriately and promptly.
• Practices 6S and ensures good housekeeping of laboratory, work area and equipments.
• Supports equipment calibration and maintenance, performs autoclave requalification and washing machine verification
• Performs peer review for verification of task and data.
• Participates in laboratory investigation (when required) and assist in the timely closure investigations, CAPAs.
• Ensures proper archival of submitted document for easy retrieval
• Identifies and reports problems in QC to supervisor in a timely manner.
• Adheres to all safety and security policies and practises
• Manages ad-hoc support tasks
• Assist QC support manager in the management and operations of the team
• Scheduling day-to-day shopfloor activities and resources handling to ensure timely sample and material management Provides training to the team
• Provide guidance, support, and technical expertise to the team Involves in investigation and protocol and report writing (when required).
• Involves in SOP writing and updating.
• Organization and Management Responsibilities
• Creates strong team morale and a culture of accountability and ownership
• Provides leadership, guidance and technical expertise/support to the juniors
• Ensures continuous improvements of the QC operations
• Ensures expenditures are within budget

Skills:

Professional

• For QC Support Technologist - Fresh graduate of NITEC, Diploma in Science (or equivalent)
• For Senior QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 4 years of experience/Degree holder with at least 2 years of working experience.
• For Lead QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 8 years of experience/Degree holder with at least 4 years of working experience.

Technical

• Competent technical skills in good laboratory knowledge and hands on experience in inventory management
• Knowledge of cGLP & cGMP

Business

• For QC Support Technologist, Senior QC Support Technologist 1, 2
• Basic report writing skills (preferably with legible hanwriting)
• Basic planning and organizing skills (for individual time management and work planning) Good interpersonal skills
• Team player
• For Senior QC Support Technologist 3 and Lead
• Effective report writing skills
• Planning and organizing skills (for individual time management and work planning)
• Leadership and problem solving with analytical and logical thinking

Competencies:

• Effective report writing skills
• Planning and organization skills
• Able to work independently
• Team player
• Analytical skills with logical thinking

​​

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

Job Description

• To coordinates the process of product registration and market access approval in the designated countries including providing all required documents and certificates within the specified timeframe proactively to complete product registration.
• To provide advice to internal and external teams in interpreting relevant guidance documents and standards.
• To contact local authority and organization for both regulatory problems solving and obtain updated information on current and developing regulations.
• To review and approve documents to support Post Market Change notification (including labelling changes) to comply with international regulations and standards.
• To remain up to date on regulations and communicate any key changes to stakeholders in the broader organization.
• To provide training when necessary and assist with the development of the respective countries’ Regulatory Affairs infrastructure to facilitate greater speed to market.
• To take charge of QA (complaint reporting etc) for all subsidiaries.

Qualification

• Degree/ Diploma in Biomedical engineering or science or QA/RA related field
• Minimum progressive 3 years of QA/RA working experience in medical device manufacturing industry

Interested candidate, please email to [email protected]

Leon Leong De Cong

R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

COMPANY DESCRIPTION

NTUC Health Co-operative Limited (NTUC Health) is an NTUC social enterprise that provides a comprehensive and integrated suite of quality and affordable health and eldercare services to meet the growing needs of families and their dependents. Building on close to three decades of experience and expertise, NTUC Health is among the largest providers of active ageing, senior day care, nursing home, and home personal care services in Singapore. We also serve vulnerable seniors in selected areas in Singapore through Community Case Management Services (CCMS), CREST mental health support, and a sheltered senior group home. In addition, we run a family medicine clinic.

Our purpose is to achieve ‘health for life'; enabling healthy and fulfilling years by being a trusted partner of seniors and their families in our community.

For more information, please visit https://ntuchealth.sg or follow us on Facebook, Instagram, and LinkedIn.

RESPONSIBILITIES

You will be responsible for assisting with the onboarding of Nursing Home residents and ensuring that they continue to receive the quality of care as described in NTUC Health Care Philosophy and Service Standards.

Customer Journey Experience

• Act as the main liaison and single point of contact (Care Concierge) for next-of-kin of our nursing home residents.
• Engage caregivers and residents at the pre-admission stage to address any concerns or anxieties and to better understand the specific needs of the resident.
• Conduct pre-admission counselling sessions to help caregivers understand the fees, services provided, philosophy of care, living conditions and expectations of residents and next of kin.
• Receive the resident on the day of admission, conduct orientation and ensure that the resident settles in well to the new environment.
• Actively engage residents and caregivers throughout the period of stay and address any concerns that may arise by working together with the multidisciplinary care team.
• Be involved in multidisciplinary discussions as part of patient-centered/directed care planning by providing relevant information of residents' social background, preferences and habits.

Service Quality

• Help to develop and maintain important touchpoints for the resident journey from pre-admission to discharge.
• Assist in the measuring and monitoring of customer satisfaction via residents focus groups, periodic audits, residents satisfaction surveys, etc.
• Assist the manager in implementation of internal and external service recognition programs and events e.g. annual Service Excellence Award.
• Provide inputs during team meetings on service gaps based on the feedback received and propose service initiatives and training programmes for continuous improvements.

As a Care Concierge, you will be interacting with residents from all walks of life. Many of them have multiple medical conditions which may affect their behaviour and disposition. To succeed in this role, you must enjoy interacting with people from diverse backgrounds, be empathetic and be able to appreciate their point of view. This is not a desk-bound job and will require constantly being on the move. The joys of the job come in appreciation from residents and their next-of-kin as transitioning to a new living arrangement can be challenging. Not to mention grateful colleagues as your value add to their work and the resident experience!

• Recognized diploma or degree,
• At least two years of work experience, preferably requiring interaction with a diversity of people
• Knowledge of geriatrics or experience caring for the elderly (eg; being a caregiver or volunteering) an added advantage
• Knowing multiple local spoken languages or dialects will be advantageous
• People-oriented, willing to work the ground

Location:

• Chai Chee Nursing Home

Additional Advantageous Skills:

• Appreciation and sensitivity to multicultural preferences and nuances

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Description:

• Responsible for quality issues arising from production and customer feedback and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections.
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.
• Work closely with other departments to ensure committed schedules are met in a timely and effectively manner.
• Perform any other duties, as assigned.

Requirements:

• Min Diploma or degree in precision engineering, Quality Management or mechanical engineering.
• Minimum 2 to 3 years of working experience in quality engineering or in manufacturing
• Possess excellent leadership & teamwork abilities and organizational skills
• Knowledge and application of quality tools - SPC, PFMEA, Control Plans, CPK, 8D Report, GR&R and Minitab.
• Proficient in understanding engineering drawings with sound knowledge of GD&T (Geometrical Dimensioning & Tolerancing)
• Good knowledge of ISO 9001, 14001 and 13485 quality system
• Mandarin speaker is preferred (to liaise with Mandarin speaking China & Taiwan stakeholders)

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3200 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Carry out tasks as per instructed by organization upper management
• Faciliate all aspects of operational and administrative needs of daily operations
• Prepare reports and documentations as per instructed by organization upper management
• Must be well-versed in operating Microsoft Office Suite
• Must be comfortable in performing tasks beyond usual scope, which are deemed critical for daily operations
• Provide support in the daily eldercare operations
• Manage communications between elderly clients, caregivers, next-of-kins and facilitate resolving of various matters and issues.
• Volunteering at eldercare facilities can be counted as job experience

Speak Vietnamese if can as our Staff and customers majority are Vietnamese.

- Must be able to work nights shift and on weekends.

- Recruiting, training and supervising staff.

- Managing budgets.

- Ensuring compliance with licensing, hygiene and health and safety legislation.

- Overseeing stock levels and ordering supplies.

- Handling customer feedback.

- Preparing and presenting staffing/sales reports.

- Liaising with customers, employees, suppliers, licensing authorities and sales representatives.

- Making improvements to the running of the business and developing the restaurant.

• Oversee daily operations to ensure smooth and efficient production processes.
• Manage production schedules, ensuring timely delivery and product quality.
• Supervise operational teams, providing leadership and guidance to improve performance.
• Ensure compliance with all safety, health, and food quality regulations.
• Optimize production processes and implement continuous improvement initiatives.
• Monitor inventory levels and ensure efficient stock management.
• Proven experience in operations management, ideally in food manufacturing.
• Strong leadership and team management skills.
• Ability to work night shifts and flexible working hours.
• Strong analytical, problem-solving, and decision-making skills.
• Excellent communication skills, both written and verbal.
• Ability to work under pressure and meet deadlines

1. Planning and scheduling manpower for day-to-day operations
2. Follow up and keep an update to customer request and feedbacks
3. Work closely with the sales manager and providing accurate schedule to them
4. Send out reminder text/call to customer daily
5. Resolving daily situation if any
6. Responsible for staff performance & discipline
7. Tabulate worker OT and submit to HR monthly
8. Prepare and compile monthly reports to relevant client
9. Prepare new staff on-boarding and off-boarding
10. Monitor training and development needs
11. Other related duties as assigned

Overview:

We are seeking a motivated and experienced Manager to oversee our team of Consultants. This role is essential in driving sales, providing exceptional customer service, and enhancing our brand's presence in the market. The ideal candidate will have a strong background in interior design and curtain sales, along with proven outdoor sales experience.

Key Responsibilities:

• Recruitment & Training: Hire and train a team of Consultants, ensuring they have the skills and knowledge needed to succeed in the field.
• Sales Management: Oversee on-site sales activities, guiding the team to meet and exceed sales targets while maintaining high customer satisfaction.
• Customer Engagement: Foster strong relationships with clients, addressing their needs and preferences to deliver tailored solutions.
• Sales Strategy: Develop and implement effective sales strategies to enhance product visibility and drive revenue growth.
• Market Analysis: Monitor market trends and competitor activities to identify new opportunities for growth.
• Reporting: Track and report sales performance metrics, providing insights to senior management on areas for improvement.

Qualifications:

• Experience: Minimum of 10 years in outdoor sales experience.
• Skills: Strong understanding of the sales process, exceptional communication skills, and a customer-centric mindset.
• Results-Driven: Proven track record of meeting or exceeding sales targets in a competitive environment.
• Leadership: Ability to inspire and motivate a team, fostering a collaborative and high-performance culture.

• Manager - Team Manager role, running your own P&L
• Specialisation in one of the disciplines – Technology, Technology Sales, Financial Services, Finance & Accounting, Sales & Marketing, Human Resource, Legal, Engineering & Manufacturing, Supply Chain & Procurement, Business Support and Customer Service, Contracting
• Be part of a successful business

About Us

PageGroup has been bringing the world's best employers and brightest professionals together for over 40 years. Operating through four internationally recognized and respected brands: Page Executive, Michael Page, Page Personnel and Page Outsourcing, we have the global strength to think and act beyond the boundaries of location or business function.

We are a B2B group within the ‘information sales’ space, serving most Fortune 500 organizations. We have an outstanding market lead in APAC. Singapore continues to be an important regional hub for most organizations. Our Financial Services, Finance & Accounting, Sales & Marketing, Human Resource, Digital, Technology, Legal, Engineering & Manufacturing, Supply Chain & Procurement, Business Support and Customer Service desks are well established businesses in the SEA region and is specialized across FMCG, Media, Fintech, E-commerce, Manufacturing, Engineering, Technology & Financial Services. As we continue to invest in this business, we are looking to hire new Consultants for our desks.

Job Description

Reporting to the Associate Director/Director for this business, the role will be responsible for new and existing business development within our client base.

The key measures of success in this role will be (but not limited to):

• Sourcing - be a key point of contact for the internal (HR) talent acquisition needs
• Lead Generation – drive activities, events, meetings for the purpose of networking and generating leads that are commercial important for the business
• Key Account Management – we partner with most top brands with their recruitment needs for the Singapore market so this role will be responsible for managing some of these key relationships
• Team Management – if you are someone with a passion to lead a sales business
• Engagement – use social media, events, cold calling as an engagement tool to drive new business development
• Closing – we are looking for someone with excellent negotiation skills as this role requires an ability to close

The Successful Applicant

• Bachelors’ Degree with at least 6 years experience of having worked in a recruitment company, with minimum 3 years in a people management role would be an advantage
• Passion for a commercial role and what you have done in your career to demonstrate such passion
• Values that are in line with ours
• Ability to build rapport with C-level executives as business development activity is focused on targeting global/regional leaders from the sector
• Must be proficient in Mandarin as the role will be managing and working directly with mandarin speaking clients from China.

What's on Offer

We provide unlimited international career opportunity within our worldwide network of offices. You will receive development throughout your career and work with a dynamic team that are proud and passionate about what they do and enjoy having fun too!

• 25 days annual leave
• Good career progression opportunities
• World class training and development
• A generous base salary with the opportunity for excellent bonuses
• Global career opportunities
• A dynamic and competitive work environment
• Exposure to the world's biggest multinational brands and industry leaders
• Recognition as an industry expert
• The opportunity to develop and lead a business unit.

Contact

Junie Lim (Lic No: R1770586/ EA no:18S9099)

Phone number

+65 6416 9864

Michael Page International Pte Ltd | Registration No. 199804751N