The primary responsibility of this position is to provide leadership for all Quality Assurance & Control matters.

This includes:

• Assuring consistent quality of production by developing processes and enforcing compliance to ISO 13485 quality system.
• Validating the production & inspection processes and maintaining validation status
• Managing the records for Quality Inspection, Quality Control, Calibration, QA Lab equipment, Training Resources, ERP Quality Module and Quality System Documentation.
• Managing a team of Engineers, QA Technicians & Quality Inspectors

The incumbent reports to the Site Leader, Singapore and Global Head of Quality (Medevio).

Roles & Responsibilties

Quality System Management

• Manage and maintain the site's quality management system (QMS) in compliance with ISO 13485 and ISO 9001 and applicable regulatory standards.
• Key stakeholder in ERP in Quality Module and DMS of site
• Ensure that the QMS effectively supports all manufacturing and operational processes, resulting in consistently high-quality product outputs.

Quality Operation & Lab Management:

• Oversee the day-to-day operations of the quality control and assurance, ensuring proper procedures and outcomes that consistently align with product specifications.
• Manage a team on quality inspection and establishing protocols fulfilling both internal, external customers.
• Develop and enforce rigorous lab testing protocols to maintain stringent quality and safety standards.

Capital Expenditure Planning and Equipment Management:

• Plan and manage capital expenditure for quality-related equipment in production to support ongoing and new operations.
• Site calibration SME and coordinator for both internal and external calibration.
• Ensure timely maintenance and calibration of quality equipment to maintain operational efficiency and compliance with industry standards.

NPI and quality engineering:

• Ensure compliance with new and pre-existing product requirements.
• Key stakeholder in new product development including qualification to production readiness.

Global Quality:

• Working with Global Head of Quality to drive Global Quality Plan
• Working with peers in Global Quality to drive strategic global initiatives, ensuring cohesive quality management across Medevio Sites

Regulatory Compliance and Auditing:

• Oversee readiness for all internal and external audits, including customer audits and third-party regulatory audits.
• Lead the preparation and submission of documentation required for regulatory compliance in all markets where products are distributed.
• Develop and implement strategies to manage and reduce compliance risks.

Supplier Management and Incoming Quality Control:

• Oversee supplier quality management, conducting audits and addressing issues to ensure supplier compliance with quality standards.
• Develop and maintain strong relationships with suppliers to ensure continuous supply chain improvement and adherence to quality specifications.

Quality Improvement Initiatives:

• Identify opportunities for process improvements and lead quality improvement projects to enhance manufacturing efficacy and product quality.
• Drive the transformation towards a paperless factory to enhance operational efficiency and data integrity.
• Implement Statistical Process Control (SPC) to monitor and control quality during manufacturing processes.
• Utilize digital tools and methodologies such as Six Sigma and lean manufacturing to improve productivity and product quality.

Team Leadership and Development:

• Manage and lead a team of skilled quality engineers and technicians, providing strategic direction, training, and development.
• Foster a culture that prioritizes quality and compliance through continuous training, learning and development programs, and succession planning.

Stakeholder Engagement and Reporting:

• Align with the global quality function on strategic global initiatives, ensuring cohesive quality management across the organization.
• Collaborate closely with manufacturing, R&D, and supply chain departments to ensure alignment on quality standards and to address quality issues promptly.
• Report on quality metrics and KPIs to senior management, providing insights and recommendations for ongoing quality enhancements.
• Communicate effectively with customers and regulatory bodies regarding product quality and compliance issues.

Complaint and CAPA Handling:

• Lead the investigation and resolution of non-conformance issues and product incidents, identifying root causes and implementing corrective actions.
• Manage the customer complaint process, ensuring all complaints are addressed promptly and effectively.
• Lead the development and completion of 8D reports, ensuring thorough documentation and effective resolution of issues.
• Oversee the implementation of corrective and preventive actions (CAPA) to eliminate the causes of potential non-conformities or issues, preventing their recurrence.

Environmental Health and Safety (EHS) and Sustainability:

• Support the development, implementation, and enforcement of an EHS policy, complying with all legal and corporate policies.
• Assist in fostering a culture of safety responsibility, providing ongoing training and resources to ensure a safe and healthy work environment.
• Support the establishment and execution of site ESG goals in alignment with Medevio's global sustainability roadmap, ensuring the site contributes effectively to broader corporate sustainability targets.

Qualifications

• Bachelor’s in Engineering or Science / Master’s in Engineering or Science
• Extensive experience within a manufacturing environment with a thorough understanding of ISO 13485 and ISO 9001.
• Six Sigma certification and/or ASQ certified Quality Engineer

Job Summary

We are seeking a highly motivated and experienced Quality Manager to lead our quality assurance efforts for the production of state-of-the-art nanoparticle synthesis equipment and systems. The ideal candidate will have a strong technical background in engineering or a related field, coupled with a deep understanding of quality management principles and practices. This role requires a hands-on approach, involving direct participation in assembly, calibration, and quality assurance processes.

Responsibilities

Quality Management System:

• Develop, implement, and maintain a robust quality management system (QMS) aligned with industry standards (e.g., ISO 9001).
• Oversee the documentation and control of quality records, procedures, and work2020 instructions.
• Conduct regular internal audits to ensure compliance with QMS requirements and identify areas for improvement.

Quality Assurance

• Lead inspections, tests, and verifications of products and processes.
• Collaborate to ensure product designs and manufacturing processes meet quality standards.
• Analyze quality data to identify trends, root causes of defects, and opportunities for process improvement.
• Implement corrective and preventive actions to address quality issues and prevent recurrence.

Hands-on Involvement:

• Actively participate in the assembly, calibration, and testing of nanoparticle synthesis equipment and systems.
• Conduct detailed inspections and functional tests to ensure product quality and performance.
• Troubleshoot and resolve technical issues that may arise during production or testing.
• Implement 5S for continuous improvement of work quality across production and quality management

Supplier Quality:

• Evaluate and qualify suppliers based on quality performance and delivery capabilities.
• Monitor supplier performance and take corrective actions as needed to ensure consistent quality.

Regulatory Compliance:

• Stay informed of relevant industry regulations, standards, and certifications (e.g., ISO, CE marking, FDA).
• Ensure compliance with regulatory requirements and maintain necessary documentation.

Continuous Improvement:

• Promote a culture of continuous improvement and innovation within the organization.
• Identify and implement process improvements to enhance efficiency, reduce costs, and improve product quality.
• Lead or participate in lean manufacturing or Six Sigma initiatives.

Qualifications and Skills:

• Bachelor's degree in Engineering, Physics, Chemistry, or a related field.
• Advanced degree (Master's or PhD) preferred.
• 2+ years of experience in quality management, preferably in equipment for nanomaterial synthesis
• Strong understanding of quality management principles, tools, and techniques.
• Experience with ISO 9001 and other relevant quality standards.
• Excellent problem-solving and analytical skills.
• Strong attention to detail and a commitment to quality.
• Excellent communication and interpersonal skills.
• Proficiency in using quality management software and tools.
• Hands-on experience with assembly, calibration, and testing procedures for nanoparticle synthesis equipment.
• Ability to work in a highly agile start-up environment

Benefits

The recruited researcher will have the opportunity to work as part of an international, interdisciplinary team, across Singapore and the United Kingdom. Accelerated Materials works to provide an inclusive environment to maximize employee wellness, with initiatives such as remote work programs and flexible hours. We also provide expert mentorship in entrepreneurship for candidates interested in commercialization of their inventions.

If you are a highly motivated and results-oriented individual with a passion for quality, we encourage you to apply.

About Accelerated Materials

Accelerated Materials’ vision is to bring sustainable, next generation nanomaterials to reality. As a spinout from the University of Cambridge and the Cambridge Centre for Advanced Research and Education in Singapore (CARES), AM is commercializing a unique platform for nanomaterial synthesis, and is now pushing forward their first laboratory scale synthesis equipment and software products.

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

At #TeamCPF, you’re not just joining a team; you are embracing a culture of excellence, collaboration, and meaningful impact. You will play a pivotal role in empowering over 4 million members to secure their retirement, healthcare, housing needs and better navigate life’s uncertainties.

We thrive on sharp minds and insightful decisions. Your ability to analyse and think critically isn't just valued; it's essential. Every choice you make contributes to our collective success.

Collaboration is our way of life. We believe in the power of effective partnerships and seamless communications across teams. Together, we amplify each other’s strengths and achieve remarkable results.

Our learning never stops. We encourage your inquisitiveness and courage to embrace new challenges head-on. Your agility, readiness to challenge conventions, embrace of data-driven strategies, dedication to learning and applying new skills fuels our innovation and progress.

At the core of everything we do lies a genuine desire to make a difference. We serve our community and support each other with compassion, empathy, and unwavering dedications. Every action we take is guided by a deep sense of purpose and a commitment to those we serve.

Join us at #TeamCPF! Together, let's redefine possibilities and leave a legacy that echoes for generations.

What you will be working on

As a part of the Service Quality Management team, you will be responsible for implementing and managing the Board’s Customer Relationship Management System (CRMS) that is used by both frontline and backend departments to handle correspondences with our customers. You will play a role in ensuring the successful deployment and integration of systems to enhance service quality and improve customer experience.

In this role, you will:

• Serve as the primary liaison between business teams, overseeing project progress and gathering feedback.
• Collaborate with stakeholders to define clear business requirements and ensure smooth integration of systems.
• Participate in testing to ensure system readiness and alignment with standards, and provide post-implementation support.
• Troubleshoot and resolve project blockers in collaboration with IT colleagues and vendors.
• Harmonise business processes to accommodate changes from the new system.
• Support change management communications and training plans for internal users during the transition phase.
• Provide training on new digital capabilities to deliver accurate information to customers.
• Identify gaps between systems and business needs for future enhancements.
• Review and streamline policies and processes based on emerging technologies and methodologies to keep abreast of market practices.

What we are looking for

We value the diverse talents and experiences that each individual brings to the table. While mastery of every requirement may not be necessary, familiarity and expertise in some of the following areas will position you for success within this team.

• Relevant experience in project management or operations management, preferably in a customer service or digital transformation environment.
• Familiarity with managing and implementing enhancements to improve processes and increase productivity/efficiency would be advantageous.
• Knowledge of CRMS platforms, such as Salesforce, will be an added advantage.
• Relevant strong experience with testing methodologies and quality assurance processes.
• Demonstrate strong communication and stakeholder management skills.
• Ability to work collaboratively in a cross-functional team environment.
• Ability to collaborate and communicate with stakeholders to ensure alignment and successful project outcomes.

The successful candidate will hold the corporate title of Manager/Senior Manager, with seniority based on individual work experiences.

Position is on a 1-year full-time contract directly under the payroll of CPF Board with an option to renew, contingent upon confirmation and subject to organisational needs.Additionally, there is potential for emplacement into a permanent position.

What you can expect

Being part of #TeamCPF means embarking on a challenging and rewarding career in a progressive workplace that values productivity and growth. Here’s what awaits you:

• Opportunities to engage in a mix of formal and informal training, keeping your skills sharp in our ever-evolving technological landscape.
• Promotion opportunities based on your capability and on-the-job performance.
• A vibrant community of like-minded and friendly colleagues, where collaboration and creativity thrive.
• A hybrid work model that offers flexibility for remote work, subject to exigencies of service.
• Flexible dress code that empowers you to choose your appropriate outfit for the day.
• A comprehensive rewards package that includes annual leave, pro-family leave, medical and dental benefits, and access to recreational activities.

About Central Provident Fund Board

At the Central Provident Fund (CPF) Board, we believe in developing individuals who are inspired to do their life’s best work, through 3Ps: Purposeful Work, Professional Growth, People & Culture.

Purposeful Work – The CPF Board helps 4 million members save for their retirement, healthcare and housing needs. Beyond being a pension fund, we are unique in being a national social security organisation, and we serve CPF members knowing that we make a difference.

Professional Growth – At CPF Board, you will have the opportunity to learn on the job and pick up new skills and knowledge. Although you are joining one organisation, you will have access to many career paths in the years ahead.

People and Culture – When you join CPF Board, you become part of a mission-oriented organisation with a strong culture of teamwork, collaboration, and innovation. As an employer, we value our people as our greatest asset, and foster a culture of respect, diversity, and inclusivity, where everyone's voice is heard, and contributions are recognised and celebrated.

Come and be a part of #TeamCPF today, to make a difference in the lives of others and in the future of Singapore.

[EYH(1]Remove?

Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

Singapore

At Rolls-Royce, we pioneer cutting-edge technologies that deliver the cleanest, safest and most competitive solutions to our planet’s vital power needs. We embrace the power of data and technology and aim to be Digital First in everything we do.

Key Accountabilities

• To provide Quality and Safety leadership and expertise both internally and across the external Maintenance, Repair and Overhaul network for the APAC region to define and deploy strategies that drive quality improvement at pace.
• To provide Quality and Safety leadership to drive supplier maturity and improvement across the APAC region to deliver performance that enables the business to achieve its goals and enhance its reputation.
• Coach and lead suppliers to deliver an effective Zero Defects and Zero Harm strategy, underpinned by Quality Improvement Plans, whilst ensuring the Supplier has all the relevant prevention skills required.
• Development with the Supplier of their Quality Management System to ensure readiness for approval.
• Communicate a simple, compelling and consistent vision which suppliers understand and want to be part of.
• Engage and influence a wide range of people at all levels both internally and at Suppliers.
• Coach suppliers in complying with relevant requirements including MRO SABRe, Safety Management System and external / regulatory standards.
• Contribute to sourcing decisions by performing pre-selection assessments (ESSCA).
• Govern the delivery of the Quality performance (KPIs) of the aligned suppliers through performance and compliance monitoring to maximise efficiency and effectiveness in meeting requirements, business goals and enhancing its reputation. Where Quality performance diverges from target, drive and coach the suppliers on recovery.
• Protect the business and customer through performing, governing and coaching of problem containment and resolution methods and tools for aligned suppliers, to minimise impact and to ensure the necessary corrective and preventative actions are completed and verified in a timely manner. Ensure the effective governance of Problem Management exists in the aligned suppliers.
• Implement and ensure compliance to the SMT Operating System / Governance across the External MRO Network via implementation of a standardised Quality Governance across the MRO Network and in alignment with SMT priorities.
• Drive the deployment of the Supplier Maturity Assessment programme with identified Suppliers, by ensuring adherence to plan and a robust improvement plan is in place for each Supplier.
• Ensure suppliers self-lead improvement and engage appropriate internal and external resources.

Key Experiences and any Qualifications

• You will be Degree qualified or equivalent
• ​Demonstrated levels of leadership and influence
• Demonstrated MRO Part 145 knowledge essential
• You have demonstrated experience and track record of delivering results in a Quality Management role in an MRO Part 145 environment
• You can demonstrate good knowledge of relevant international standards or regulatory requirements
• You will have experience of root cause analysis, problem solving / 8D investigation methods and process improvement techniques.
• You will have experience in terms of containment activities and be able to provide regular updates to internal stakeholders.
• You will have a strong customer focus, able to effectively influence and challenge appropriately to manage customer expectations.
• Lean six-sigma Green Belt or Black Belt accredited, but not essential

Pioneer an enduring legacy. Join us and you’ll develop your skills and expertise to the very highest levels, working in an international environment for a company known the world over for brilliance and innovation.

Pioneers of Power

We are an equal opportunities employer. We’re committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we’ll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realize their full potential.

You can learn more about our global Diversity and Inclusion strategy here.

So that you can be your best at work and home, we’ll consider flexible working arrangements for everyone, in any role. Click here for more details on how we can support you. Click here for more details on how we can support you.

Rolls-Royce follows a merit-based employee recruitment process and does not charge/accept any payment/security deposit from candidates during the recruitment process. Candidates seeking employment with Rolls-Royce should be cautious of potentially fraudulent communications and offers from individuals and agencies purporting to be from, or acting on behalf of, Rolls-Royce.

Please refer to the Career section on the Rolls-Royce website to verify employment offers or vacancies. Rolls-Royce shall not be liable for any loss, damage or consequences that may arise from any communication or offer of employment not directly made by Rolls-Royce.

Rolls-Royce reserves the right to take legal action against any individuals or agencies acting on behalf of Rolls-Royce without authorisation.

Salling Search is currently recruiting for an experienced Quality Systems Manager for a reputable and established shipping company in Singapore.

Responsibilities

Quality Improvement and Monitoring

• Develop and implement a product quality improvement plan aligned with organizational goals.
• Monitor product quality metrics, analyze warranty data, and identify areas for continuous improvement.
• Conduct audits, assessments, and collaborate with suppliers to address quality risks.

Corrective and Preventive Actions

• Lead cross-functional teams to identify root causes of quality issues.
• Develop and implement corrective and preventive actions to mitigate future risks.
• Identify and communicate process and product improvements proactively.

Collaboration and Stakeholder Engagement

• Work closely with engineering, manufacturing, suppliers, and classification societies to ensure consistent quality.
• Build relationships with partners, customers, contractors, and official bodies.
• Liaise with shipyard personnel and management to ensure product quality meets organizational objectives.

Documentation and Compliance

• Develop and manage quality improvement documentation and reporting.
• Maintain a thorough understanding of product specifications, classification rules, and warranty claim processes.

Customer and Field Engagement

• Conduct customer familiarization with products and gather operational feedback.
• Travel occasionally to operational areas for fact-finding and quality assurance.

Professional and Interpersonal Skills

• Communicate effectively, build trust, and negotiate compromises when necessary.
• Stay updated on industry best practices and continuously develop professional skills.

Qualifications

• At least 6-8 years in management or supervision of marine vessel construction, operation, or maintenance with a proven track record.
• Formal marine or engineering qualifications are highly desirable.
• Strong negotiation, dispute resolution, and commercial acumen.
• Excellent communication and teamwork abilities.
• Proficient in managing documentation and records.
• A strong network of suppliers, subcontractors, and contacts is highly desirable.

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

• To promote a Zero Harm culture & best practices through the implementation of a tailored safety, quality and environmental management system including the development and implementation of appropriate policies & procedures to ensure a safe and efficient workplace.
• To ensure regulatory compliance & due diligence to safety, health, quality, dangerous good/hazardous substances and environmental obligations.
• To liaise with all business units on matters relating to safety, quality and environment including potential non-compliance of a regulatory nature.
• Compliance with all relevant safety, quality, environmental & P&C policies & procedures to ensure a safe work environment at all times.
• Actively liaise with all departments to ensure quality control, quality assurance and safe practices are adhered to at all times.
• Work with A-Gas management to implement its policies, procedures, work instructions, mission and goals.
• Lead by example in demonstrating personal qualities, behavioural traits and A-Gas values & behaviours.
• Timely management reporting in the manner and form as required from time to time.
• Perform site inspections as required.
• Actively participate in internal & external project meetings and provide sound recommendations on SQE initiatives and/or highlight any deviations & possible risks if any.
• Manage & maintain integrated certified Safety, Quality, Environmental management systems to ensure continued compliance to ISO 9001, ISO45001, ISO14001, ISO17025 (NATA), and other relevant standards like ISO 31000 where applicable.
• Identify and maintain compliance to relevant WHS, Environmental & other acts, regulations, codes of practices & guidelines etc.
• Audit SQE Management System, including reviewing, monitoring, measuring, reporting on performance.
• Recommend and implement continual improvement to the SQE system, work instructions and associated processes.
• Promoting awareness of SQE requirements, communicating and consulting with all staff & other stakeholders on SQE processes, documentation and regulatory requirements.
• Development and implementation of SQE documentation relevant but not limited to procedures, plans, hazard and aspect identification, risk assessments, emergency preparedness & response, design & development, management of change, control measures, management review including ad hoc measures based on current environmental occurrences.
• Actively lead & participate in Operational Safety, Process Safety, Risk Assessment, HAZOPs, Pre-Purchase Risk Assessments, Management of Change & Design & Development, SQE incident investigation & root cause analysis and processes.
• Active participation and collaborating to provide SQE / technical advise as required to the Lab Team, Customer Service, Operations, Engineering, Rapid Recovery and wider A-Gas Group & other relevant stakeholders.

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

About Us

Vivo Surgical is a patient-focused, clinician-driven medical device developer and manufacturer. Headquartered in Singapore with offices in China and Thailand, we are pioneering a novel endoscopic surgical robot for complex endoluminal surgeries. ISO 13485 certified with international accreditations awarded such as the US FDA and European CE mark, our devices target the medical needs of the world through innovative applications of science & technology. These encompass such fields as in vivo surgical LED lighting, portable endoscopy and endoscopic robots, which are strategically co-developed with world-class healthcare institutions and KOL collaborators. Join us as we build towards our vision of being Asia Pacific’s leading medical device developer and manufacturer.

About The Role

We value the importance of having a robust Quality Assurance and Regulatory Affairs team that would serve as a key pillar for sustained commercial success. To that end, we are looking for a Quality Assurance & Regulatory Affairs Manager to join us on this journey. You will be part of our fast-growing team and will take ownership of your role from the get-go. You will work on ensuring our company’s commitment to comply with regulatory requirements and to maintain the effectiveness of our Quality Management System (QMS). You will also be in charge of our products’ regulatory strategies and submissions to various regulatory bodies. Your role will enable you to work not only with diverse functions internally but also in close tandem with our external partners such as our suppliers, distributors and notified bodies.

Your responsibilities shall include the following:

• Ensure the company’s QMS complies with ISO 13485 and FDA 21 CFR 820/QMSR.
• Develop and manage Quality Procedures such as document control, CAPA, NCR, Supplier Control, Production Control, Feedback and Complaints Handling, and Post Market Surveillance.
• Organize and execute internal audits, management reviews and supplier audits.
• Plan and lead ISO 13485 audits and regulatory inspections.
• Participate in the products’ verification and validation activities.
• Develop, review and compile the medical device technical files whilst making sure the products meet all regulatory and quality standards.
• Involved in risk assessment tasks to identify potential quality and compliance risks in the product lifecycle and advise adequate risk control measures.
• Serve as the company’s Quality Management Representative (QMR) and Person Responsible for Regulatory Compliance (PRRC).
• Manage and mentor the QARA team to ensure members are adequately trained.
• Stay updated on medical device laws and regulations in the targeted markets.
• Work with senior management to define and deliver adequate quality and regulatory strategies.

Your Qualifications & Experience

• Minimum Bachelor’s degree in Engineering or Science.
• At least 5 years’ experience in quality assurance and/or regulatory affairs in the medical device Industry.
• Firm understanding of ISO 13485:2016, FDA 21 CFR 820/QMSR and ISO 14971.
• Prior involvement in HSA, FDA 510(k)/De Novo and/or MDR 2017/745 submissions will be a plus.
• Experience in generating risk management documentation (risk management plan, report, FMEAs).
• Possess a leadership and strategic mindset to organize and prioritize tasks for effective and timely delivery of regulatory goals to meet the company’s business objectives.
• Certification as an ISO13485:2016 lead auditor will be advantageous.

Contact

Please send your CV and cover letter to: [email protected]. We look forward to receiving your application.

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Quality Technician, Product Quality is responsible for product release of complete instrument and play key role in ensuring the released instrument is meeting quality and regulatory requirements.

This position reports to the Senior Manager, PQE and is part of the QARA team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Perform outgoing product release (Device History Records buy-off) and inspection on instruments according to documented procedures.
• Perform part tracking for install and complaint issues. Ensure part is being received so failure analysis can be initiated.
• Support in complaint investigation activities. The job also require work with cross functional team and ensure proper investigation records is generated.

The essential requirements of the job include

• Diploma/ ITE in Engineering or equivalent.
• 2-3 years of relevant working experience in QA is required.
• Knowledge of the following QMS standards - ISO9001 QMS, ISO13485 QMS and FDA 21 CFR Part 820 is strongly

It would be a plus if you also possess previous experience in:

• Experience with working in a manufacturing environment is preferred.
• Experience in performing product release activity for medical equipment’s.

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Need to know Zeiss CMM Program

Need to Know Zeiss CMM Operation

Have Quality Assuarnce & Quality Control Knowledge

Know incoming / In-process / External provider parts insepection

Know prepare of quality documentation and maintenance documents like daliy Monitoring Data and Monthly Data performance

Will preapare of documentation for customer audit and ISO audit

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

KEY DUTIES AND RESPONSIBILITES:

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.

1. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
2. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
3. Ensure readiness of QC Laboratory in internal / external audits.
4. Maintain data integrity in Quality Control activities and ensure appropriate traceability.

6. Initiate change control documents.

1. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
2. Participate in New Product Introduction activities.

9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.

1. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
2. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
3. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
4. Escalate the quality events, trends as appropriate to QC Head.
5. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
6. Serve as subject matter expert on laboratory instrumentation and compliance issues.
7. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
8. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
9. Maintains a safe laboratory environment by implementing recommendations made by EHS.
10. Initiate CAPEX for equipment purchases.

20. Support in budget preparation for QC Laboratory.

21. Any other activities as and when assigned by the Superior.

JOB REQUIREMENTS:

· EDUCATION: Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

· EXPERIENCE: Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

• Possess working knowledge of GMP in the pharmaceutical industry.
• Excellent interpersonal and analytical skills, good verbal, and written communication skills.
• Working knowledge of qualification, calibration, and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• Working knowledge of method development, validation, verification of analytical method.
• Familiarity of 21 CFR Part 11 requirements.

Key Responsibilities:

· Implement methods to inspect, test and evaluate products and production equipment.

· Inspect Incoming raw materials’ quality (IQC).

· Ensure that products adhere to quality standards.

· Prepare reports by collecting, analyzing and summarizing data.

· Train and manage production line staff in production practices and quality assessment of goods.

· Track products in WIP (Work in Process) to guarantee that each part of the process is correct.

· Improve Production Yield by ensuring good QA practices and implementing corrective actions.

Qualifications:

· Diploma or higher in Quality Management, Engineering, or a related field.

· Minimum of 5–8 years of experience in quality assurance/control within a Manufacturing, Aerospace, or related industry.

· In-depth understanding of AS9100 or ISO9001, and regulatory compliance frameworks specific to Aviation.

· Experience in Calibration procedures and maintaining Inspection Tools and Systems.

· Excellent problem-solving skills with a keen attention to details.

· Ability to work independently as well as collaboratively within a team.

· Good team player, good attitude, honest, discipline, positive thinking, resourceful, and a good problem solver.

· Excellent communication skills to foster effective teamwork and communication within the operations team and the customers.

How to Apply:

If you are passionate with the Aerospace industry and want to be part of a forward-thinking company at the forefront of the Aviation Industry, dedicated to exceeding customer expectations, and navigating the dynamic Aviation landscape, and where your expertise in Quality Assurance will help shape innovative and reliable Aviation Solutions, we invite you to join REETZ and work with us to take the Company to a new height. Please submit your application to the email address: [email protected]

• Manage end-to-end quality control of incoming raw material, in-process monitoring and final inspection of outgoing products involving organoleptic, physical, chemical and microbiological analysis

• Conducts drinking water quality inspection and test monitoring from water treatment process to bottling process

• Conducts daily hygiene and factory housekeeping inspection including production floor, raw material storage and warehouse facility

• Maintains laboratory inventory, equipment tool calibration and maintenance • Perform monthly verification of pest control inspection and documentation

• Handle all new applications and renewal of quality standard certification in compliance to SFA (Singapore Food Agency), FSSC 22000, ISO 22000 Food Safety Management System, HACCP and Halal

• Able to conduct internal factory audits, annual ISO certification, surveillance audits and customer related inspections

• Handles external laboratory testing of source water and product drinking water in compliance to SFA standards

• Manage and investigate product complaints by customers and ensure closure in accordance with company guidelines and external regulatory requirements

• Manage risk-management procedures and report recurring issues to management and product development

• Oversees quality management compliance, customer quality index and quality control operations

• Conducts annual management review on quality system involving quality performance index, plans and improvements

• Provide training and support to relevant team on systems, policies, procedures and core processes

• Any other duties assigned by Superior

Requirement:

• Proven working experience as a QC / QA in Food Factory for minimum of 3 years

• Diploma / Degree preferred. Advantage for candidates with Certifications such as Quality Auditor, Quality Engineer, Quality Improvement Associate and Six Sigma

• Quality inspection, auditing and testing experience

• Highly motivated, self-driven and able to work in a team

• Meticulous, Independent with good communication skills, interpersonal and leadership capabilities

• Problem solver with a strong analytical mindset

• Able to multi-task

• Experience with implementation of corrective action programs

• Strong computer skills including Microsoft Office, QA applications and databases

• Knowledge & experience of data analysis tools, concepts and methodologies of QA

• Knowledge of relevant regulatory requirements

Responsibilities:

· Create, control and distribute QA related documents

· Register, track and maintain records of all incoming/outgoing drawings, documents from clients/suppliers

· Project documents/drawing submission thru Aconex

· Plan, implement and organize ISO 9001, 14001, 18001 & Bizsafe audit (Internal & External)

· Maintain proper documentation in accordance to IMS requirements

Requirements:

· Possess Diploma/Degree in Civil Engineering

· Preference with/without experience

· Proficient in MS Office

· Preference will be given to those who with experience

Note: This role requires frequent travel and will be based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Key Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to address and resolve abnormal quality issues within the manufacturing process.
• Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Drive efforts to improve internal quality control procedures and enhance process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead initiatives to resolve customer-reported quality issues, ensuring timely and effective resolutions.
• Prepare detailed reports for stakeholders outlining corrective actions and preventive measures.
• Develop and implement strategies to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to enhance inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a unified approach toward achieving quality objectives.
• Manage personnel-related tasks, including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Oversee the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor’s degree in a relevant field; advanced degree preferred.
• A minimum of 6-8 years of proven experience in quality management, particularly within manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience collaborating with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.
• Willingness to travel frequently and be based in China and Vietnam for at least 10 months per year (separate living accommodations provided). The role includes annual 4 round-trip tickets back to Singapore.

Job Description & Requirements

Able to operate CNC CMM machine with 2 years experience needed is a priority.

Knowledge in QC equipments, example: Height Gauge, Smart Scope, Veriner caliper etc.

With computor knowledge to provide QC report and handle NCR.

Must have knowledge in drawing specification. Example: Tolerance, Surface Treat, Heat Treat etc.

Basic knowledge in machining process.

• Provide guidance and coach lab technicians.
• Inspects all incoming raw material for compliance according to current standards.
• Conducts periodic checks and analysis on all WIPs.
• Retains finished product samples from production to conduct checks and analysis.
• Assist QA on failure analyses, corrective and preventive action response to customer’s complaint.
• Assist in GMP audits, validation, qualification and change control.
• Assist in maintaining Product Quality and Technical File.
• Write technical papers or reports or prepare standards and specifications for processes, products, or tests.
• Supervisory or leadership experience in QC.
• Knowledge in regulatory requirements such as ISO 13485, compliance with good laboratory practice and cGMP.

Responsibilities:

·Driving Root Cause analysis in problem diagnosis from customer anomaly to ensure problem prevention and resolution implementation ensuring effectiveness

·Management of Change communication to customer for approval to implementation

·Develop, implement, and improve the department and product total quality system to assure product specification is met

·Facilitate and work with team members on quality improvement to the product by providing technical guidance in QE tools applications

·Perform quality system or process audit to assure quality systems are in place

·Support the viper manufacturing in ensuring product meets the established standards of quality including reliability, usability and performance required

·Establish & Implement manufacturing quality metrics and lead team on to achieve the goal and continuous improvement

·Meet Plant/Department cost & quality objectives

·Implement lessons learned across manufacturing and also new products development projects

·Perform special projects to support continuous improvement on an ongoing basis thru functional standardization and implement process improvement ideas in primary work area.

·To adhere to the Health & Safety regulations as set out by the EHS Department and any other Government regulations

EDUCATION AND EXPERIENCE (Minimum Qualifications)

Degree in Electronics Engineering

5 years of experience in a Quality/Engineering in Product Design Engineering/Manufacturing environment preferred

SKILLS

Analytical problem-solving skills

Proficient oral and written communication/presentation skills

Basic print reading and interpretation of specification skills

Good knowledge of FMEA, Control Plan

Advanced statistical experience with quality tools usage and Product Design Development Cycle is preferred

Certified Design for Six Sigma/Six Sigma Black Belt/Reliability Engineer will have an added advantage

*Disclaimer statement:
Career Scam Disclaimer: BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website. To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. Applicants should never provide their Social Security numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. Job applicants are invited to contact BorgWarner through BorgWarner’s website to verify the authenticity of any employment opportunities

Job description

Non-Destructive Testing (NDT) technicians examine structures, vehicles, and products for flaws and structural weaknesses using non-destructive testing techniques. They conduct material tests, interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering, or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound, infrared, and radiographic.