Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

KEY DUTIES AND RESPONSIBILITES:

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.

1. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
2. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
3. Ensure readiness of QC Laboratory in internal / external audits.
4. Maintain data integrity in Quality Control activities and ensure appropriate traceability.

6. Initiate change control documents.

1. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
2. Participate in New Product Introduction activities.

9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.

1. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
2. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
3. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
4. Escalate the quality events, trends as appropriate to QC Head.
5. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
6. Serve as subject matter expert on laboratory instrumentation and compliance issues.
7. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
8. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
9. Maintains a safe laboratory environment by implementing recommendations made by EHS.
10. Initiate CAPEX for equipment purchases.

20. Support in budget preparation for QC Laboratory.

21. Any other activities as and when assigned by the Superior.

JOB REQUIREMENTS:

· EDUCATION: Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

· EXPERIENCE: Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

• Possess working knowledge of GMP in the pharmaceutical industry.
• Excellent interpersonal and analytical skills, good verbal, and written communication skills.
• Working knowledge of qualification, calibration, and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• Working knowledge of method development, validation, verification of analytical method.
• Familiarity of 21 CFR Part 11 requirements.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

AMC Founded in 2006, licensed by the Singapore Police Force, Police Licensing and Regulatory Department. offers custom security solutions suited to your demands. We work towards meeting the unique needs of every client, be it an enhancement to your current security set up or a complete overhaul that includes:

• Virtual patrolling

• Facial recognition access control

• Remote vehicular access control

• License plate recognition technology

• Visitor Management System

Responsibilities:

• Plan, develop and execute test plans and test cases for desktop and web-based applications.
• Perform manual and automated testing using tools like Selenium, Bash scripting and Python.
• Identify, document, and track bugs using bug tracking tools such as JIRA
• Collaborate with developers, product managers, and other stakeholders to ensure high-quality software releases.
• Conduct performance testing using tools like JMeter.
• Perform API testing using tools like Postman.
• Create and maintain test automation frameworks and scripts.

Requirements:

• Previous leadership experience in planning and proposing QA test activities to stakeholders.
• Proficiency in Python scripting, bash scripting and C++ would be beneficial.
• Strong understanding of manual testing methodologies and processes.
• Experience with automation testing tools (e.g., Selenium).
• Familiarity with version control systems (e.g., Git, SVN).
• Knowledge of Windows and Linux environments.
• Excellent analytical thinking and attention to detail.
• Strong verbal and written communication skills.
• Ability to troubleshoot and resolve issues efficiently.
• Experience working in agile teams.
• Familiar with test methodologies, including functional and non-functional testing, regression testing, smoke testing, sanity testing, end-to-end testing, integration testing, and installation testing

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Your Role

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• To participate, work closely and give support to safety personnel at site on all initiatives/ matters relating to Safety and Health
• To comply with the Company Safety Management System and the WSHA and its subsidiary legislation

The Requirements

• Possess a Degree in Civil Engineering or its equivalent
• Minimum 3-5 years of relevant working experience in construction industry
• Must be technically inclined and possesses excellent problem-solving
• Be able to work independently as well as acquiring good interpersonal skills to coordinate between the various disciplines and construction teams

RESPONSIBILITY

Assist Product Owner and Business Analyst to craft out user story acceptance criteria.
Analyze and decompose complicated software systems, and design a holistic test strategy.
Conduct research on emerging technologies and develop test automation frameworks.
Develop test suites of test scenarios and test cases.
Take a risk-based approach for test automation.
Perform time-boxed exploratory testing.
Maintain a regression test suite in the QA nightly build.
Actively refine smoke test suite in the Development CI environment.
Lead system integration testing with other system owners.
Manage user acceptance testing.
Manage the defect life cycle, test artifacts, and repository.
Drive continuous improvement in agile testing practices and tools.
Take on a secondary role as an Application Performance Engineer or Application Security Engineer.
EXPERIENCE AND SKILLS NEEDED

Minimum of 3 years of experience in exploratory testing and regression test automation.
Strong analytical skills.
Meticulous attention to detail.
Good interpersonal skills, such as tactfulness.
Good presentation and listening skills.
Experience in an agile development environment will be an added advantage.
Experience with Robot Framework, SikuliX, Selenium, Playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC, and Sprinter) or EggPlant will be an added advantage.
Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage.
Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines.

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Work Location - Near Aljunied MRT

5 days work week

Roles & Responsibilities

This position is responsible for conducting audit checks to ensure that products meet the established standards, This role also supports the achievement of Company quality target.

1. Confirm to quality standard and quality processes

· Inspect in-coming and outgoing products according to policies standard.

· Perform all product processes within section (eg, QC, SAO), Reworks, Repairs, Defective photo-taking)

2. Contribute to continuous improvement

· Maintain Integrity accuracy and completeness of Supplier invoice data and QC data in system

· Establish standard operating procedures and conditions for handling storage and checklist of stock.

3. Perform other ad-hoc duties as assigned.

Requirements

· At least 1 year of experience in Gold quality control in retail jewellery or quality control experience in manufacturing

· Those with more years of experiences will be considered for the senior executive position

· At least Diploma in any discipline

· Basic understanding of production methods.

· Attention to detail

· Able to use basic MS Office.

· Good Communication and Interpersonal Skills

· Able to multi-task and quick learner

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Responsibilities:

• Validation quality review of lifecyle documents and protocols for Automation CSV qualification, EFU qualification, cleaning validation, laboratory equipment qualification, and IT systems qualification.
• Review and approve validation lifecycle document and protocols/reports in accordance with relevant policies, standards, procedures and guidelines timely
• Review and approve as needed, qualification/validation executed package validation exceptions, deviation, and investigations encountered during qualification/validation representing Quality
• Collaborate with multi functions to arrange, plan and ensure smooth running of the qualification/validation activities
• Participate in site Validation Maintenance Program
• Any other tasks as and when assigned by supervisor
• Support other technical changes and duties as require

About You:

• Diploma/Bachelor/Master/Doctoral Degree in Engineering/Science
• At least 5 years qualification/validation experience
• Possess process automation experience will be the additional benefit to be considered
• Communicate well, self driven, motivated and able to work well with others
• Based in Tuas

Job Type: Contract

Contract length: 9 months

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

We highly encouraged all applicants to submit their applications via the LEGO Career Portal using this link: https://www.lego.com/en-us/careers/job/sr-supplier-quality-engineer-6f94007108221000602a9e2e02f30000

Core Responsibilities:
• Be the key person in providing high quality solutions to assigned tasks to go beyond the set goals. Cases, for example, claim/big incident handling etc.
• Perform and execute independently all assigned quality assessments and audits for potential suppliers and existing suppliers to look for and evaluate supplier quality capability improvements or upgrading opportunities and take ad hoc actions.
• Follow up & monitor with well formulated plan & steps of all audit NC status or supplier quality improvement projects to uplift supplier platform capabilities & performance.
• Follow up designed data analysis tasks, which add value to supplier performance monitoring and business/operating plan related decision-making
• Proactively involve in activities, continuously contribute on sustainable supplier platforms through understanding the company, business category’s strategies, intelligently transform things for significantly improved results

• Role authority: declare supplier quality audit result. Approve/reject supplier’s reaction for customer claim.

Do you have what it takes?

• More than 8 years working experience on quality or engineering; certified lead auditor for VDA 6.3 will be preferred
• More than 8 years on hands experience of handling quality issues or shop floor control on plastic or electronics products;
• insightful Complex global collaboration skills and key stake holder management
• Profound project management experience to be competent at global quality big case handling
• Certificated Lead Auditor for ISO 9001
• Qualified Auditor for VDA6.3（nice to have）
• Good understanding on lean and quality tools like SPC, MSA, FMEA, 8D etc.
• Reading/writing/speaking is requested frequently for English.(C1)

No relocation assistance is offered for this position

Applications are reviewed on an ongoing basis. However, please note we do amend or withdraw our jobs and reserve the right to do so at any time, including prior to any advertised closing date. So, if you're interested in this role we encourage you to apply as soon as possible.

What’s in it for you?

Here is what you can expect:

Family Care Leave - We offer enhanced paid leave options for those important times.

Insurances – All colleagues are covered by our life and disability insurance which provides protection and peace of mind.

Wellbeing - We want our people to feel well and thrive. We offer resources and benefits to nurture physical and mental wellbeing along with opportunities to build community and inspire creativity.

Colleague Discount – We know you'll love to build, so from day 1 you will qualify for our generous colleague discount.

Bonus - We do our best work to succeed together. When goals are reached and if eligible, you'll be rewarded through our bonus scheme.

Workplace - When you join the team you'll be assigned a primary workplace location i.e. one of our Offices, stores or factories. Our hybrid work policy means an average of 3 days per week in the office. The hiring team will discuss the policy and role eligibility with you during the recruitment process.

Children are our role models. Their curiosity, creativity and imagination inspire everything we do. We strive to create a diverse, dynamic and inclusive culture of play at the LEGO Group, where everyone feels safe, valued and they belong.

The LEGO Group is highly committed to equal employment opportunity and equal pay and seeks to encourage applicants from all backgrounds (eg. sex, gender identity or expression, race/ethnicity, national origin, sexual orientation, disability, age and religion) to apply for roles in our team.

Research shows that women and people from different underrepresented backgrounds often only apply for a job if they meet 100% of the listed qualifications. For all candidates, if you dream of being a part of our team and you meet many, but not all of our listed qualifications for this role, please apply.

The LEGO Group is fully committed to Children’s Rights and Child Wellbeing across the globe. Candidates offered positions with high engagement with children are required to take part in Child Safeguarding Background Screening, as a condition of the offer.

Thank you for sharing our global commitment to Children’s Rights.

Just imagine building your dream career.

Then make it real.

Join the LEGO® team today.

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

DESCRIPTION

This is an exciting opportunity for you to be an integral part of the Quality Management department to optimise patient care and outcome.

The Administrative Executive is responsible for providing administrative support to ensure the smooth and efficient functioning of the department initiatives within the hospital. This role involves the coordination and maintenance of accurate records, meetings, and supporting the implementation of quality management projects.

RESPONSIBILITIES

Documentation Management:

• Maintain accurate and up-to-date records related to quality management.
• Organize and file documentation in compliance with regulatory standards.

Data Entry and Analysis Support:

• Assist in data entry for quality metrics and performance indicators.
• Generate basic reports and assist in data analysis under senior staff guidance.

Meeting Coordination:

• Schedule and coordinate meetings for the Quality Management team.
• Prepare meeting agendas and distribute relevant materials.

Communication and Correspondence:

• Facilitate communication between internal and external stakeholders including team members, other departments, external healthcare institutions, among others.
• Draft routine correspondence and respond to inquiries as directed.

Assist in Quality Projects:

• Support the implementation of quality management projects.
• Collaborate with team members to ensure project timelines and deliverables are met.

QUALIFICATIONS/REQUIREMENTS

• Minimum Diploma.
• At least 2 years working experience.
• Good speaking and writing skills
• Proficient in computer skills including Microsoft Office (e.g. Excel, Words etc.)
• Self-disciplined, motivated, self-starter, Meticulous
• Ability to work collaboratively in a team environment

Interested candidates, please apply with your updated resume, expected salary and notice period.

We regret that only shortlisted applicants will be notified.

NOTE: CRAWFURD HOSPITAL IS NOT IN COLLABORATION WITH ANY EMPLOYMENT AGENCY NOR CONSULTANT FOR OUR POSITIONS OPENING.

Job Description:

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements:

• Minimum Diploma or Degree in Chemistry, Food Science and Technology, Analytical Chemistry or equivalent in years of similar experience.

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Job Description..

• Ensure all packing workers are performed their jobs according to the written work instructions.
• To place packaging materials from the store by based on the packing plan.
• Verify and monitor the work done by Group Leaders and Inspectors.
• To handle and follow up on the problems forwarded by Group Leaders.
• Checked and reviewed all checklist and reports by Group Leader and below by timely basis.
• Assist final packing area.
• To provide on the job training to the Packers, Inspectors, Group Leaders other support operators.
• To ensure packing procedure and packing method are implemented and practiced.
• Ensure storage, packaging, online and final packing area are clean and tidy at all times.
• Ensure the product is stored, labeled and segregated at designated area.
• Ensure worker is handle products in correct manner and not causing any damage or contamination onto the products.
• Inform to Executive/Engineer or Manager for any equipment need to be repair, service or calibrate.
• To conduct appraisal for the worker during probationer period.
• Any other task that may be assigned.
• Help packing at warehouse.
• Performance the QAQC task in the warehouse.
• Paying attention to detail, especially when it come to quality control.